Is it possible to use PowerCLI to update only the pilot VMCI?

Similar Questions

• Can I use cfindex to update only one category?

  I'm using CFMX7. I have a collection with categories enabled verity Installer. I indexed the collection twice, once with class = fichiers1 and once with category = files2 so now I have a collection with two categories. Is it possible to use cfindex to update only the files1 category? The collection is going to be huge, so I don't want to update the entire thing, just one category. Or y at - it another way to go about this?

  I keep answering my own questions. I'll just two distinct collections of installation and when I use cfsearch I'll get two collections at the same time. I will use the urlPath attribute when I cfindex so I know where the file is located in the results of the research.

• Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos

  LN

• Is it possible to use < af:message > to display the validation model adf instead of the default note window

  For any component input, validation that we created at the level of the entities attribute are executed and if any validation fails, the messge is displayed in a window of default note on the component of the.

  Is it possible to use < af:message > to display the validation model adf instead of the window of default note for the corresponding component in a fragemnt jsff page?

  I use JDev 11.1.1.6.0.

  Thank you

  Jean Bayard

  Michelle,

  I have good news. I was able to reproduce, locate and bypass your problem.

  The problem is the following:

  works very well in JSF pages, but it does not work in JSF fragments (which are part of a glued TaskFlow, what is included in a page parent as a ) because ADF when executing a miscalculation of the value of of 'for' - attribute when it is part of a region BTF. For example, suppose that the has id = "it1" (as it is in your JSF fragment above) and this TaskFlow defined in included as a with id = "r1" in a parent page. Then the internal ID of the input text field will be 'r1:0:it1', but at runtime, the framework will set the value of 'for' - attribute to the 'r1:it1' (which is wrong) instead of "r1:0:it1" (which is the correct value).

  You can work around this bug by specifying:

  Instead of

  in your code above. In this way the framework will make up the correct value for the 'for' - attribute at run time and will not work correctly. Don't worry the caveat against a non-existent ID in the JDev source code editor.

  You must do this trick only in fragments JSF and you should not do in JSF pages.

  Dimitar

• Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?

  Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?

  Yes, I want to talk and EC2 instance and I am able to do Dreamweaver to easily connect using SFTP which I believe is a SSH protocol. See the image below. This method works.

  I currently have a test instance and will finally have an instance of production when the site is finished.

  Local environment is not installed on my workstation and my thought was that put it on the server would allow transparent operation including scripts on the server side. The testing station is not public.

  

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• How to create the map that updates only the changed lines

  Hello
  
  I have a map that made a merger (update/insert) in a table. The problem is that it will always update all rows in this table. I want to update only the changed lines.
  
  Some dummy code that shows what I want to do.
  Current situation (all lines updated):
  
  FUSION
  IN
  Table 1-t1
  USING
  (select key_column, Column1, Column2 from table2) t2
  ON)
  T1.key_column = t2.key_kolumn
  )
  
  WHEN MATCHED THEN
  UPDATE
  SET
  T1. Column1 = t2.column1
  T1. Column2 = t2.column2
  WHEN NOT MATCHED THEN
  INSERT
  (t1.key_column, t1.column1, t1.column2)
  VALUES
  (t2.key_column, t2.column1, t2.column2);
  
  What I'm trying to get (only changed the lines updated):
  FUSION
  IN
  Table 1-t1
  USING
  (select key_column, Column1, Column2 from table2) t2
  ON)
  T1.key_column = t2.key_kolumn
  )
  
  WHEN MATCHED THEN
  UPDATE
  SET
  T1. Column1 = t2.column1
  T1. Column2 = t2.column2
  * WHERE
  T1. Column1! = t2.column1
  or t1.column2! = t2.column2*
  WHEN NOT MATCHED THEN
  INSERT
  (t1.key_column, t1.column1, t1.column2)
  VALUES
  (t2.key_column, t2.column1, t2.column2);
  
  WHERE in WHEN MATCHED t clause is that I'm not able to create via OWB in the mapping. How is that possible?
  I tried to look for the solution here and google without success
  
  Thank you!

  Hello

  you left outer join table2, with table1. Then use a filter to determine which rows in which an attribute has changed or no towing in table1 where found.
  To compare attributes use expression with nvl to properly handle nulls: nvl(table2.my_attribute,'#')! = nvl(table1.my_attribute,'#')

  Kind regards
  Carsten.

• Using PowerCLI for update vROps

  Now that vROps API fully support REST and PowerShell supports the REST, how can I take a power shell script and do something like:

  • import a list of virtual machines from a CSV file
  • vROps by using components REMAINS powerShell
  • Create a custom group in vROps containing these virtual machines?

  Thank you!

  So, you can use Invoke-RESTMethod to call the REST API.  Of that, it returns a json object type that can be analyzed through ConvertFrom-JSON.  On the other hand, you should be able to use ConvertTo-JSON to create the text of the PUBLICATION using Invoke-RESTMethod command.

  I personally have not tapped into this area yet and probably won't be able to, but I used a lot of PowerShell to make interaction REST API without difficulty, this should be no different.

• Use already downloaded updates for the new Win7 installation? __

  Dial-up access to the Internet (no high speed access)
  Windows 7 64 bit
  Microsoft Office 2010 Professional

  Hello:

  It took many extra hours to keep Windows 7 64-bit and Microsoft Office 2010 Professional update through Microsoft Windows Update by using the switched to internet connection.  All updates are up-to-date and kept up-to-date with the dial-up connection.

  Eventually, I'll install cool Windows 7 64-bit with Microsoft Office 2010 Professional on the same computer with the same configuration.

  Problem: Using Microsoft Windows Update to install security and bug fixes after a new installation of Windows 7 64 bit, using a dial-up connection will take days.

  Possible solution: copy all the files in the folder: C:\Windows\SoftwareDistribution\Download to another hard disk, and then copy it to the same place after a new installation of Windows 7 64-bit.

  Then run Windows Update, it will find these files and reinstall will take minutes, instead of hours or days.

  Question:
  (1) Will this work?
  (2) are there other directories on the computer that should be copied to another hard disk, then back to a new installation of 64-bit Windows 7 and Microsoft Office 2010 Professional?  (Microsoft Office will install in the usual way, it's security and fixed bugs via Windows Update, I am referring to).

  Any help is appreciated.

  Thank you

  FYI: All other applications will be installed and updated, if necessary, the usual way.  My question is regarding security and bug fixes for 64-bit Windows 7 and Microsoft Office 2010 Professional by using Microsoft Windows Update.

  To order the DVD:
  http://go.Microsoft.com/fwlink/?LinkId=208642

• Is it possible to use "recently closed" tabs in the new firefox without a mouse?

  In the old firefox, you had the option of clicking ONCE in the upper left corner and then using the arrow keys to navigate the menu of recently closed tabs, extremely fast and go to the tab you want. Now you klick three times, and you have to search the history button because there is no list more, and there is no possibility of using the arrow keys. Is it possible to use the arrow keys on the keyboard as before or is there anyway of downgrading my version to the old version of firefox?

  You can also access this data via the menu of tory His(Alt + S)

  • Press the ALT key, or press F10 to display the Menu bar.

• Is it possible to use workflows to Train for the old masters in detail for CRUD operations

  Hello

  I use Jdev 11.1.2.3

  I have a use case of the implementation of paintings by master detail (a master and 3 Details) and I want the CRUD operation will end only when all the data are introduced. It is therefore possible to use workflows to train for this use case.

  Thank you

  The pb is solved, I just replace the Taskflow newPersonalDetail by a simple point of view and for the createInsert I am using invokeAction in the pageDef:

  Thank you

• CMD. EXE: IS IT POSSIBLE TO USE TWO COMMANDS INSIDE OF THE COMMAND CMD 'FOR '?

  HAY EVERYONE.
  I WROTE A PROGRAM TO CMD. EXE.
  AND I WANT TO SET A VARIABLE TO THE NUMBER OF FILES PRESENT IN A DIRECTORY.
  THE PROBLEM IS THAT I DON'T KNOW HOW TO USE THE TWO COMMANDS INSIDE OF THE COMMAND.
  HERE IS THE EXAMPLE OF MY PROBLEM INSIDE THE BAT FILE:

  OFF @ECHO
  FOR /F %%D IN (' DIR/W/D / N / L ' "C:\WINDOWS\SYSTEM32\*." ") DLL | TROUVER/C/I/N 'B' ') SET FILES_NUMBER = % Y
  ECHO: % FILES_NUMBER %
  BREAK
  OUTPUT

  I EXPECT THAT THIS PROGRAM WAS TELLING ME HOW MANY DLL FILES THAT BEGIN WITH THE LETTER B, I HAVE IN MY SYSTEM32 DIRECTORY.
  HOWEVER, THIS PROGRAM HAVE A MISTAKE DURING ORDERING.

  | WAS NOT PLANNED AT THIS TIME.

  "WHEN I USE IT JUST COMMAND DIR/W/D O:N: C ' C:\WINDOWS\SYSTEM32\*. "DLL" | " FIND/C/I/N "B" WITHOUT THE FOR ORDER THIS ORDER WRITE A NUMBER ON THE SCREEN. THE NUMBER OF DLL FILES THAT BEGIN WITH THE LETTER B IN MY SYSTEM32 DIRECTORY.
  IF THESE TWO COMMANDS (DIR AND FIND) COMBINED ALL WORK OK.

  BUT I WANT TO REDIRECT THE OUTPUT OF THESE COMMANDS IN A VARIABLE. FOR THIS I USE THE COMMAND FOR.

  WHEN I USE JUST A COMMAND INSIDE THE ORDER, HE DIDN'T THERE WAS NO ERROR.
  BUT WHEN I USE PIPES, A MISTAKE SE PRODUCT.

  SO, MY QUESTION IS: HOW TO USE TWO COMMANDS INSIDE OF COMMAND? OR HOW TO USE A PIPE TO COMMAND INSIDE.

  YBY

  A slightly different method, but will set the Files_Number variable to what you want:

  Off @Echo
  C:
  cd\Windows\System32
  Dir B *. DLL | FindStr.Exe 'File (s)' > Temp.Txt
  FOR /F "Tokens = 1-4" %% IN (Temp.Txt) Set Files_Number = %% a
  Echo number of records Files_Number is %

  Note: You can add a Temp.Txt DEL if you want, but it is not necessary because the > causes the replaced every time that you run this. (If we had used > as our redirector, it adds to the Temp.Txt file, which we don't want.)

  In addition, when you use the / w with the DIR command that calls the large format so you get 1 account per line regardless of the number of files has the letter B in them. Also, your search for the letter B in each line through FIND counted the Bs if they're the first letter.

  My method deliberately DIRs for only these DLLs that begins with the letter B. FindStr allows us to give us only the row that contains the number of files. In the FOR-IN-DO we know that this line will have four elements of the text, so we settled our chips to 1-4. They will be placed in temporary variables a, b, c & d.

  Given that the actual number of files, that's what we want, we have Files_Number = %% a.  Had we wanted to know the total number of bytes of the file, WE Set Total_Bytes = % c.

  You can do both if you want to do like this:

  Off @Echo
  C:
  cd\Windows\System32
  Dir B *. DLL | FindStr.Exe 'File (s)' > Temp.Txt
  FOR /F "Tokens = 1-4" %% IN (Temp.Txt) Set Files_Number = %% a
  FOR /F "Tokens = 1-4" %% IN (Temp.Txt) define Total_Bytes = %% c
  Echo number of records Files_Number is %
  Echo Total number of bytes is Total_Bytes % %

• Is it possible to use math.random to generate the name of the item web app?

  Math.Random () can be used to auto fill in the name of an element of web application field? I have a client who needs web app point briefs to be random and we do not ask the user to have to create a name for their presentation.

  I think that I thought about it. If anyone is interested:

  I should add that if you try to do, make sure to place your script AFTER the element, you want to be pre-populated. Otherwise, the script will be executed before the load element and it won't work.

• Is it possible to use advanced actions to set the value of the question?

  Hi - I am trying to develop a course of Captivate 4 and wish I could on slide enter advanced use of actions to check the value of a user variable, and if the variable is equal to x then set the value of the question (correct) 1. Is there a system variable, that I can use to define?

  This course is to download a package to an LMS (Moodle) SCORM.

  Ideas/suggestions would be greatly appreciated.

  Unfortunately, Captivate is not currently a way to manipulate SCORM score via advanced Actions and the user or System Variables.

  So that you could have OnSlideEnter check and set the value of a variable, you don't have a way to use this information to force sending a question slide.

• Update only the vmware tools?

  Hi all

  
  Recently we received BSOD on server 2012. Microsoft is continuing its investigation, but it seems likely vmxnet3 drivers are involved. Therefore, we would like to update.

  However, given that we are now very busy on a project, we would like to avoid completely updated vcenter and ESX (if possible). So my question is, can we day purely VMXNET3 driver to the latest version on our virtual machine? Or maybe only the VMWare tools? Or is there a possibility for stability/performance issues if you do not keep everything on the same version?

  
  Thanks in advance!

  So my question is, can we day purely VMXNET3 driver to the latest version on our virtual machine? Or maybe only the VMWare tools? Or is there a possibility for stability/performance issues if you do not keep everything on the same version?

  This isn't a problem, running new versions of VMware Tools on the former ESXi hosts is supported only by the product VMware interoperability matrices: