Is it possible to write custom code to activate the search funtionlity through several folios?

Similar Questions

• Need to write custom code to cancel extracting content

  Hi all

  I'll have to take actions on the undo of content command event. I can't find any java filter on the undo check event. Could you please help me how can I add custom code to cancel the extraction of content.

  Thank you in advance...

  If you turn on tracking of full services detailed in section and run a undo the check and then review the output of server, it shows you all the available filters?

  If this isn't the case, you may need to replace the undo checkout service and insert your custom code if there is not an available filter. Usually I recommend is not the substitution of service, but instead to substitute the ServiceHandler that contains the code for the service and insert a new filter when you need. This way do you less harm than any diversion he (and allow others a way to place nice with your customization).

  Jonathan

  https://jonathanhult.com

• Is it possible to write a program to decompress the files in pl/sql or sql?

  Experts in the morning,
  
  I have a zip file on my host that contains a list of files (reports). Each of these files have a different name and I already wrote the code to retrieve data from these files.
  My oracle is installed on a linux server
  
  Now my question is this:
  is it possible to write a sql program to decompress the .zip files (located on my host) and stores its contents in this same folder?
  
  Thank you

  Kevin CK wrote:
  So my best bet would be to decompress the file using 7-zip (free) and load the files separately myself.

  This is probably the route I'd go down, especially if you have several files in zip archive.

• Copy the following code to change the search bar works always in FF29?

  This support thread contains code to change the appearance of the search bar in firefox 27: https://support.mozilla.org/en-US/questions/976166?esab=a & s = & r = 3 & as = s

  This code, this method will always work in FF29? I don't really want to 'try' without knowing it, because I don't want to mess up my firefox.

  Or, how can I find old bar back (I think to FF26)?

  I found the addon 'GlobalFindBar' to do.

• Failed to contact customer service to activate the window

  Original title: I can not connect

  I can't contact customer service to activate my window.is there is no reason that I can't communicate with them?

  Hi takashiN95,

  1. what exactly happens when you try to contact Customer Service?
  2. where are you located?

  See How to contact a Microsoft Product Activation Center

  We recommend that you provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to use iDoc script to activate the Oracle text search?

  Hello, I created a query to search for files in a specific Department and I want to check if the files are uploaded in fact properly so I would combine the first part of my request that a comprehensive document, search for a key word.

  The server is configured to search for metadata database only, but I was wondering if you could create a script that would do a search for possible text anyway? If so, an example would be appreciated.

  Kind regards

  Iwona

  
  

  Be sure to check the documentation for your answers. They must be a primary (i.e., first) resource for you.

  http://docs.Oracle.com/CD/E28280_01/doc.1111/e26692/searchindex.htm

  No information contained in the response of section "Configuration of the search Index" your question?

  Hope this helps,

  -ryan

  * may not be the most recent document, but this is the first returned by a quick search on google on your keywords.

• Code to change the search option to search QD on the field in the Configuration item on a specific call screen

  We have an obligation to change the search option to search QD on the field in the Configuration item on a specific call screen.

  By default, all our leaders tend to have the default value 'Client' on the field Configuration point QD.  This is the case after that they took the customer on the call screen, when they enter the CI field and press ENTER, it refreshes automatically just the IC, where the selected customer is the owner of the aircraft.

  However, on a screen specific IPK call status, we want the search Configuration option to point QD to always change the option "Config Item Title', not 'customer '.

  No idea how to change this option only if you are using this specific screen and the default value remains the same for all the other forms of appeal?

  Thanks for any help,

  Ian

  Hey Ian!

  Appearently, you can take full control over the default search with a custom script menu item. This is an example how to do this in the Custom_InCallDetails.js file:

  function CustomLoad() {
    var ciqd = da.BTN_ITEM_REFQD;
    if(ciqd){
      var etp = da.ENTITY_TYPE;
      if(etp && etp.value=='7') ciqd.DefaultMenu = "CITYPEQUICK"
      else ciqd.DefaultMenu = "CUSTQUICK";
    }
  }
  

  (change the number 7 to the entity type Ref you need)

  Unfortunately this change script default for a user permanently. So if he had put any custom value before it is crushed.

  If you need to keep the default values personalized search menu, maybe you need further customization to store the user selected value in a wrapper environment and set the value to return if necessary (just an idea).

  Best regards, Gytis

• Muse can't generate code to activate the web fonts.

  Hello. I would use a web kit type font (Brandon Grotesque) in my project, but when upload them to the server I get the message:

  Could not generate code to activate one or several web fonts on the 'Home' page [Error 500]

  All the solutions to this problem?

  Hi Nathan,

  I'm sorry you troubles here. The 500 error has been resolved in another post on the forum. Please take a look and let us know if you need anything that anyone else.

  Could not generate code to activate one or several web fonts [Error 500].

  See you soon,.

  Benjamin

• Code to use the search button

  Hello:
  I want using the search button in my web site but I don't know, how I can use this correct form?
  I feel after the insertion of a form where I should connect the search button?
  I used this code:
  < name of the form = "form1" method = "post" action = "" >
  < label >
  < input type = "submit" name = "button" id = "button" value = "Search" > < input type = "text" name = "textfield" id = "textfield" size = "10" >
  search site < / label > < / make >

  Hello:
  I want using the search button in my web site but I don't know, how I can use this correct form?
  I feel after the insertion of a form where I should connect the search button?
  I used this code:
  

  
  
  
  Search in the site

• I posted yesterday, asking for help getting a customer code. Now, the statement is not actually show that which is his creation.

  I pasted the statement in my form and it had no more syntax errors, but now he is not actually create the code. I type the name and a phone number, but nothing happens?

  If you need more info ask please. I don't know what else to post for help.

  Form1. #subform [0]. CustCode:initialize - (FormCalc, client)

  Here, you see what is the initialize event, and you can change the event on any field of the form

  

  In looking from the top of the script editor, you can see there is Show: with a DropDownList on the side, you can choose all events from there, choose so calculate and make sure you are in formcalc

• is it possible to write a procedute to update the name of the columns

  I have a lot of tables and have to rename a large number of columns (due to data transfer that I made from sql server 200)... Is it possible to pl/sql create procedure to rename the columns of the table...

  Hello

  I did not well u... but if you try to use TOAD, I hope this will help u.

  Sarah

• Computer crashed. Reinstalled Adobe Acrobat 7.0. Now need a response code to activate the product. 1016-1338-6113-8061-1016-1204 series

  Try to reinstall Adobe Acrobat professional 7.0. Computer is not a line. Need to ask for the code. Where can I find?

  You cannot use your acrobat 7.

  Error "Unavailable activation server" in Adobe CS2 and Acrobat 7 Audition 3

• Adobe Muse CC trial has expired and now I can't enter a code to activate the product

  I installed the Muse and the original notice, that I got from my headquarters indicated using the key of the business for our package from Adobe and then accept the trial for Muse. Muse-trial version has expired and I have a serial number, but I can't access. my options are listed as "buy" or "sign in", if you select "buy" then you are taken to the site of Adobe. If you connect, you are prompted to "buy or continue trial and if you select claims that the trial has expired and that it sends that back you to the screen that tells you to buy the software again. How can I get the serial number?

  Hello Aiva,

  If you have a creative cloud Enterprise serial key, you can serialize Adobe Muse using this serial key and remove the sign in too (Muse CC 2014 64-bit). Please follow the steps mentioned in the link below to serialize Muse CC 2014.

  Serialize Adobe Muse: http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html

  Delete the record: http://helpx.adobe.com/creative-cloud/packager/installing-products-exception-folder.html

  I hope this helps.

  Thank you

  Ashish

• How to designate a custom code in an exception handler

  Hello
  
  In the documentation "18.6.3 How designate of custom Code in an exception handler.
  at http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/taskflows_complex.htm#ADFFD22602
  section "to designate a custom code in an exception handler" says step 1
  ""In the navigation Application, expand the project where you want to write custom and navigate to the Application Sources/META-INF node.".
  Following these steps will result in a file in the wrong location

  SomeExceptionHandlerApp\ViewController\adfmsrc\META-INF\services\oracle.adf.view.rich.context.ExceptionHandler

  Whereas it should really be

  SomeExceptionHandlerApp\.adf\META-INF\services\oracle.adf.view.rich.context.ExceptionHandler

  also be cause the documentation says "Save the Java class that you write as a service in the." "adf\META-INF of your Fusion web application directory.
  
  Once in the right place the file is available from the "descriptors/ADF META-INF/services" node on the accordion of the navigation Application Application resources Panel.
  This Application resources panel does not seem to allow the creation of these services configuration files.
  
  issues related to the:
  -(q1) is step 1 in the section "to designate a custom code in an exception handler" a bug in the documentation?
  -(q2) what would be the best way to create these services using JDeveloper Setup files?
  
  Thank you very much
  Jan Vervecken

  Jan,

  I think we can use the new gallery to create the file. However, in this case you must ensure that you navigate to the correct directory (as you understand). Define a custom exception handler is not so common as Manager default ADFc is usually sufficient. I for my part usually create the file of configuration on the file system and do not use JDeveloper to this (but that's my personal preference). I'll keep a note about that and followed with the team of doc to correct chapter.

  Thank you

  Frank

• Advice on the restructuring of code to avoid the downturn over time

  Hi, I am a new user of LabView, you want some advice on how to better structure the program I wrote and which is used to perform a hydrostatic test arrangement. Data are collected on a module of AI cDAQ 9207 and a cDAQ 9474 module is used to control the two valves that subsequently controls pressure in and out of the test Chamber. I enclose my first version of the reference code.

  What the VI is supposed to do when the user of the weapon system and strikes then the execution, the program switch will cause a transition of the test chamber through several States corresponding to the levels of different pressure for some time. Time curve vs pressure is written to a file of measures. I built using a state machine structure.

  My problem is, during the initial trial, when the duration of the test was about 5 minutes or so, the program went very well. However, once I started to test the length of the actual test of 2.5 hours, I noticed the program running slower and slower as time progressed to the point where it would take several seconds for each iteration of the loop, then by accident about an hour or two in the test. After scouring the articles and messages, I suspect the main culprit is the diagram of waveform and to a lesser extent DAQ assistant.

  While I need the loop structure data collection and case to run pretty quickly (preferably the order a few hundred s/s) I need the code to be able to react to changes in pressure in the room quickly enough, the actual data, that I need to store and display the graph can be as slow as a sample per second or even longer. My guess is at this point that I have to rebuild the program using some sort of architecture of producer/consumer, I'm looking for some advice on how best to structure the program.

  Data acquisition obviously belongs in the producer loop that will run at a fast enough pace and there will be a consumer loop that will run at a much slower pace for the Bulletin Board writing to the extent of the file vi, but where should I put the case of structure state machine which currently controls the valves? Should put in the loop of the producer since it must run at the same fast pace as the collection of data, so it can react to changes in pressure or should I build another loop of consumer for him? What other indicators (pressure and Boolean) and controls on the front panel, they should be on another loop operating at a medium speed I want to respond to a faster pace than the data to the chart/write the loop, but they do not need to be as fast as the data acquisition loop?

  Finally, I'm not quite sure what would be the best way to reduce the sampling rate of the data that I have in fact appear on the graph and the store in the file, it wouldn't make sense to create another task of measurement that samples at a rate below just for that purpose. Suggestions and advice would be greatly appreciated! Thanks in advance!

  Bob

  My guess is that if you monitor the use of memory over time, you see that going up, Yes? Everything is is always a good idea to get rid of the express VIs, I would look for the problem of slowdown in the structure of the case. You repeatedly open and never close tasks which are created using some DIO channels. Hnece each time that the loop more memory is allocated. Try to move creating channel screws out of the loop, then the tasks are created once before the start of the loop and then written to as required inside the loop - and don't forget to delete tasks once the loop over.

  Mike...

  PS: You are right with your comments regarding the structure of the producer consumer. Basically it break up as things get quickly (DAQ IO) that there is in a loop, while the user interface and the stuff that can take a long time (such as the data record) are in another loop. You can even have three loops with one for the acquisition of input data and the other for the digital output.

  PPS: Finally don't forget that even if the structure of consumption of the producer is usually represented with everything in a single diagram, there no need to be. I wrote a lot where each loop is in his own VI which is run dynamically, then the application starts.