is there a document or a troubleshooting guide for GROUP/BSOD?

Similar Questions

• is there a troubleshooting guide for ESX?

  is there a troubleshooting guide for ESX?

  I don't know that I've seen a guide unless you want to count the documentation that comes with vSphere.  It is always useful to information being there and I always like looking site KB http://kb.vmware.com whenever I have questions.

  http://www.VMware.com/support/pubs/

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Is there a troubleshooting guide for the connection of DSC-RX100M2 WiFi?

  Try to send a picture to my computer via the WiFi does not work.

  Of playback mode, when I select the menu option 'Send to the computer', the camera connects to the WiFi access point and then, is never able to connect to the computer...

  Name/group of computer job information been defined previously in the camera via USB with the help of PlayMemories House.

  After expire tries to connect to the computer, the reports of the camera that he was able to connect to the access point but not can connect to the computer.

  I already tried things

  (Please read this instead to suggest that I have try this... again)

  • I tried viewing pictures on a TV which is on the same network... and that works.
  • I tried to send photos to a "smart phone" (actually an android Tablet) connected to the same network... and it works.
  • I do not use the Windows Firewall so that the changes you home PlayMemories try to the firewall configuration Windows are not relevant.  So, I added some firewall rules for firewall, I use (Comodo) to allow incoming traffic on UDP and TCP protocols on ports 1900 and 2869 (as suggested in another post on this forum titled "Sony WX200 cannot connect to the computer via wifi".  I know it's another camera, but I guess the end of PlayMemories of the connection must use the same ports, etc..
  • I tried to connect with the products of firewall (Comodo) and the Windows Firewall completely disabled both.
  • I tried to restart the PMBDeviceInfoProvider service after the firewall rules have been added and then tried to connect the camera again, but always failed to connect.
  • I tried to restart the PMBDeviceInfoProvider service, while all products of firewalls have been disabled and then tried to connect the camera again, but always failed to connect.
  • I have temporarily stops the service of PMBDeviceInfoProvider and a simple http/web server (tiny Java Web Server - http://tjws.sourceforge.net/) port 2869 on the computer where PlayMemories Home is installed.  Then, using a web browser on another computer that is connected to the same WiFi access point that the RX100M2 camera, I was able to connect and get the default page of the web server.  If failure of the camera of the connection does not appear to be caused by a TCP connection failure and 2869 port is not blocked by the firewall.

  It does not appear to be any technical documentation or correct this information available about how the camera identifies and finds the computer, or what else can stop him from connect.  I speculate that it uses a UDP (port 1900) "broadcasting" of the PMBDeviceInfoProvider to allow the camera to find the computer.  I suspect that the "cannot connect" problem could be related to whether the wireless access point allows the UDP packets from the WiFi "side" of the wired/ethernet 'Coast' but I have no way to test or prove that, or even enough Sony documentation on the issue of whether it is a reasonable thing to try troubleshooting.

  If it gives anyone else having the same problem any ideas that lead to discovery, where it fails, please share.  If there is someone at Sony who knows what might be the cause of failure, please answer.

  Another thing I noticed is that a MTP IP device appears in Device Manager when you attempt to connect the camera, but it was not the name of camera model. I tried to uninstall the generic driver from "Device IP DPW" (right click and uninstall in Device Manager). The next time I tried to connect the camera, Windows RE-load the driver and now, it appears as DSC-RX100M2. So, I have evidence that the camera is now to find the computer, but it is yet to transfer all the files from the camera.

• Is there a way to remove the guides inbetween work plans?

  For example, I have a series of guides on all 10 horizontal work plans. I need two more in a vertical format, but all the guides on the horizontal lead.

  Thank you!

  Thank you all!

  I must of not been clear in my question, I want to say was is there a way to keep the guides for some plans of work and remove the guides where I don't want them.

  However, I found the answer to my question. I just create guides for the artboard itself which does not cross the limits of the artboard. Simply clicking the artboard and the drug guide.

  Hope that makes sense for those who want else knows how to do (other than objects, and then creating) guides for a work plan.

  My problem was to have several arboard forms crossing in the guides of other work plans.

  Thank you!

• Troubleshooting Guide: Audio does not work after a Certain period of time

  Hi all

  Thank you for choosing the HP Forums!

  If your sound recently stopped working on Windows 8.x or Windows Server 2012 and you suspect an update of Windows is involved, then look like! This is the troubleshooting guide that will explain how to solve the problem!

  Explanation:

  Currently, there is a Windows update that may cause the sound on your computer to stop working. The update is KB2962407, and it is now an "Important" update This means that it will be installed by Windows Update unless hide you it.

  This thread also covers generic sound troubleshooting which can solve the problems of "no sound".

  Before the update itself, since an update of Windows cannot be the culprit, there are a few troubleshooting can be done.

  A round of troubleshooting:

  1. run the Audio Troubleshooting in Windows 8 may solve the problem. It does not contain the possibility of eliminating any parameter that affects sound. Here are some steps on how to perform this troubleshooting:

  (a) hold down the key "Windows" and "R" and type "Troubleshooting" and then press ENTER.

  (b) a window will open. On the left, click on "Show all", then "Audio playback".

  (c) click on 'Advanced' and run it as an administrator. Then click on 'Next' to complete the process.

  2 try to create a new user account. The changes forced by the update that is likely to affect only a single user. This HP document shows you how to create a new user in the section "creating a new account in Windows 8": users and connections (Windows 8) account management

  3. try a pair of headphones or external speakers. This is set by the whole issue if the sound does not work via an output of second or third device.

  4. an alternative is to uninstall the driver manually and then force to be installed again:

  (a) open the Device Manager and go to the section "audio, video controller and game."

  (b) make a right click on your audio driver and select "Uninstall".

  (c) restart the computer. This will force the material to write a new driver at startup.

  5. Finally, to ensure that the remaining steps that you have not tried this document are tempted: no sound from speakers (Windows 8)

  New inclusions:

  Deactivating and activating the audio driver has been tested with success results enough for me to post here. Here are the instructions to do this:

  (a) open the Device Manager and go to the section "audio, video controller and game."

  (b) make a right click on your audio driver and select "disable."

  (c) wait a minute, then right-click on it and select 'enable '.

  Also, the restoration of the system is also a valid troubleshooting step. This will return the computer to a point before the update or an external source of the issue has occurred. Here is a document on how to perform a system restore: System Restore

  If you want something strong, an update of Windows completely refreshes Windows 8, without affecting the files: refresh your PC to solve problems (Windows 8)

  Also, this is a sound of Windows troubleshooting tutorial. Just out of curiosity, I've recreated the problem on a Windows 8 and went through this tutorial. He has been able to solve the problem: no sound in Windows

  *Everything in italics is currently untested, but will be tested as soon as possible. I believe that these steps will help:

  In the search bar, type "services.msc" and press ENTER.

  Hold down the 'Windows' and 'R '. Type "services.msc" and press ENTER. Look for the following services:

  -Audio service

  -Windows audio

  -Windows Audio endpoint Builder

  I want you right click on each of these services and select "Stop". When they all stopped, right-click on each other again and select 'start '. So, make sure that the status of each service is "started" and their startup type is "Automatic".

  Troubleshooting of the update:

  At this point, unless you want to reinstall the operating system, the only other option is to tackle the update, KB2962407. Please note that the following troubleshooting is ONLY a workaround, for now and should be done only if the computer has installed this update.

  First of all, you can try the hotfix package content in this document from Microsoft, specifically at the KB2962407 address: RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014

  If that doesn't help, then uninstall the update of Windows and then hide it, are the only way to eliminate the question if she caused by this update. Here is the procedure to uninstall the update:

  1. go in Control Panel, then click on "programs and features".

  2. click on "view installed updates". Look for the update with ID KB2962407.

  3. right click on the update and select "Uninstall". Restart the computer.

  Then, here is the procedure in order to hide the update:

  1. go in Control Panel, then click on "Windows Updates".

  2. click on ' Check for Updates '. When the process is complete, is expected to find important updates available. By clicking on the message will open a window where is the important updates.

  3. right click on the KB2962407 update and select "Hide update". This will prevent the installation update next time that Windows updates are installed.

  Conclusion:

  At the end of this guide, you will have the sound works again (assuming that the cause was the update of Windows, or the less focused on the software). Please let me know if you have any questions or concerns. Thank you!

  Mario

  I worked on behalf of HP.

  @Charlton26 ,

  As @vhawk1 recommended, please give my long post suddenly. You should have a positive resolution when you are finished. These steps are tested and solve the problem

  And @vhawk1 , thanks for getting the word

  Mario

• Why is there no 'user guide' for Thunderbird?

  I understand perfectly that the mode of Organization for Mozilla software is quite different from that of commercial software, so please, don't think not that I expect Mozilla behave like, say, Microsoft (I thought). That said, it is even more regrettable that there is not consistent, well-ordered guide, organized topically for Thunderbird so that the user is not required to address each issue, as it can occur in ad-hoc mode.

  You would think that now, many volunteers who answer questions here could easily set up a user guide for Thunderbird (and Firefox) as well, besides which could gather all the documents scattered in one wonderful unit. Naturally, such a user guide was no, answer questions, but it could certainly flag and help with those involving the use of basic and intermediate.

  For example, in preparing to send e-mails, I couldn't understand how to fill "To", "Cc" and "Bcc" fields in several recipients of messages without a laborious process which seemed unnecessary. There was no clear direction on the side great menu that appears on the 'Write' mode simply by pressing F9. Finally, not whereby this be intelligent that I did it, I managed to fall on the information about this. The vexations that i have experienced in become accustomed to Thunderbird, this has been the most important. But he and all the rest would have been easily successful if ordered and consistent guidelines were available in the user guide.

  Thank you.

  1. maybe I'm wrong but I don't see you said where you started to look for the information you think is missing? URL alias

  2. you ask a "tutorial"?
  -There are many examples on the web
  - https://support.mozilla.org/en-US/products/thunderbird from there to 'Learn the basics' aka https://support.mozilla.org/en-US/products/thunderbird/learn-basics-get-started

  3 or you are looking for a manual? as https://www.flossmanuals.net/thunderbird/

• I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the names of species (bold italic)

  Hello

  I'd appreciate any help I can get.  I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the species names (in bold italics) of documents so that I can put in excellent to make a comparison and produce a comprehensive list.  There are several areas of text for each page/species.  The species name is in a single text box, so it is possible to somehow only the bold italics to export a document?  I have a bad feeling, but I thought I'd ask anyway. Thanks in advance for your time and interest.

  Maggie

  Also, sorry if my original question has not obtained the Chief... I'm new to this forum.

  It would certainly be a job for a written custom script. Without scripts, I might consider using the Index feature in InDesign. Indexing is manual work very well.

• Is there a document that fills the API references from upstream?

  I inherited a script upstream that I need to convert to the system 11.1.1.3. Is there a document there that will help you bridge the gap? For example, what would be the equivalent of that? :
  
  If not objHW.DataManipulation.PblnResult then

  There is a guide API available on the Oracle Technology Network. There is not a document that however of bridges between the two APIs.

• is there a step by step guide for Mozilla protection if my 5 year old daughter click on something that could be dangerous for her?

  I need to set up a login for my older daughter of 5 years on our computer, so she only has access to Mozilla, and once on Mozilla that she cannot access inappropriate Web sites. Is there a step by step guide for someone who has never done this before?

  My operating system is Windows 7

  Thank you very much for you help and guidance.

  Respectfully,.

  Derek Mr. Bond

  Hello Derek,
  I understand that you're concerned about your daughter and there is certainly a way to solve this problem.

  1) http://www.qustodio.com/
  This is a free parental control software that offers what you need

  (2) otherwise, you can also try this one: http://www1.k9webprotection.com/

  Best regards, G-Cloud.

• Is there an installation guide for upgrade memory for Satellite L?

  UK

  Is there an installation guide for memory upgrades?

  Recommend where to get the memory chips Toshiba?

  thanx

  Mike

  Hey Buddy,

  Can you please tell us what Satellite you have exactly?

  I ask this question because I also have laptop Satellite L: Satellite L300. The more manual, you will find information about RAM upgrade and photo live what you have to remove and other important information.
  Check it!

  Theoretically you can buy each manufacturing modules but I recommend high quality of Kingston for example modules. I still only good experience with these modules.

• Running XP SP3. I get "Unable to download troubleshooting guides, please check your Internet connection."

  Running XP SP3.  I get "Unable to download troubleshooting guides, please check your Internet connection."

  Maybe this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/i-installed-Microsoft-fix-it-Center-but-cant/6f52f445-4afc-485e-B1FF-58089dc21865

• is there any document/step by steps on the upgrade of esx4 to esxi4?

  is there any document/step by steps on the upgrade of esx4 to esxi4?

  Welcome to the Forums - there is no way to upgrade to move form ESX to ESXi because basically they are the same product, the difference is the way they are managed - ESX has the Service Console for manangement and ESXi you manage directly through the vmkernel - there going to the ot to be fresh install.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• The user guide for the HP Solution Center

  I'm still trying to learn how to do things. I found a user guide for my cd055a but it focuses mainly on the aio device itself. I think I need something on the operation on the side of the computer which is the HP Solution Center. Are there online documentation to give details on the aspects of analysis of the HP Solution Center application CD055A?

  Thank you

  Hello

  You can try this:

  http://support.HP.com/us-en/document/c01909362

• I want to download the User Guide for the Apple TV user guide.  How can I do?

  I would like to download the User Guide for the generation of Apple TV User Guide 4.  Impossible to do on the Apple official site.  East - intentional; and if so, is there another way to download this User Guide?

  Hi you have this internet guide http://help.apple.com/appletv/

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.