Is there a way to make posters using personal photos in Mircosoft Word or Microsoft Paint?

Similar Questions

• Accidentally, I bought a software that says it is compatible with Windows 95 or 3.1. I have Windows XP on my computer. Is there a way to make it compatible? (It says Script error when I try to use the program). Thank you!

  My program is saying "Error in Script" when I try to use this software.  It is supposed to be used with Windows 95 or Windows 3.1.  Is there a way to make this compatible software?  Thank you!

  It would be unusual for a real program designed for Win95 or Win 3.1 be provided on a cd, they would normally have been on a diskette

• Is transparency in menu bars and the address of the browser there a way to make stronger without changing the windows settings?

  Using FF 15.0.1

  Is there a way to make the menu bar and bar addresses more than a solid color without having to change the settings of transparency in windows 7 in the area of color settings. Don't want to change everything to windows just fire fox. So is there a way to do menu bars and address more than a solid color?

  Thank you
  Dave

  Try a character solid with a color that suits you.

  • Personas for Firefox | Gallery: http://www.getpersonas.com/en-US/gallery/Solid

• Is there a way to make the safari opens a new page every time?

  Hello

  I'm kinda new here and I would like to ask a question. I now use an iPhone as a primary device, instead of Android. But is there a way to make the safari to remove all tabs when you close, and when you open it, it just opened a new page or a blank page? My phone is just laying around sometimes and I let my friends to use. But when I close safari after I order something or when I'm checking my bank account, they can all see when they open up safari...

  All I can think is to close all tabs before close Safari, or use it in private Mode:

  Enable or disable the navigation on your iPhone, iPad or iPod touch - Apple Support

• Publication in FCPX settings... IS THERE A WAY TO MAKE EDITING THE PARAMETERS EASIER TO HAVE FCP TO PUBLISH EACH SCHOOL SETTING? IS THERE A WAY TO "PUBLISHED IN THE WORLD" A WHOLE PROJECT OR AT LEAST PARAMETERS?

  IS THERE A WAY TO MAKE EDITING THE PARAMETERS EASIER TO HAVE FCP TO PUBLISH EACH SCHOOL SETTING?

  IS THERE A WAY TO "PUBLISHED IN THE WORLD" A WHOLE PROJECT OR AT LEAST PARAMETERS?

  Is it wise to publish all THE settings of a plugin?

  I prefer to reduce the options, for example I'm rigging 'size' to distribute only one of them-in my eyes - range 'useful '; or create by rigging the drop-down menu 'plans', for example for the color selections...

  In any case...

  'Major settings' as Transform or filling or 3D can be published, just click Reset arrow, and all the "sub menu" get published too... can't imagine how to make the publication easier...

  BTW: CAPS means YELLING on the boards...

  be nice... what goes around, comes around ...

• Is there a way to make an EXE LabVIEW built on Windows XP on Windows 7?

  I have a request that I build (LabVIEW 8.6) on Windows XP, that installs and works fine on other XP machines.  However, after installing it on a Windows 7 computer, I get an error stating that "The procedure entry point CsrNewThread could not be found in the dynamic link library ntdll.dll".  When I look at ntdll.dll (in C:\Windows\System32) with a tool dependency walker on XP, I see the CsrNewThread function listed, but its function is missing from the same DLL named on Windows 7.  So I guess that somewhere along the evolutionary line Windows this function has been removed from ntdll.dll.  My first instinct was to try overwirting ntdll.dll on the Windows 7 machine with one copied from my Windows XP computer.  However, our system administrator only gave me permission to replace this file on the Windows 7 machine.  I could ask him to give me this permission, but I'm not sure it's the best way to go anyway because the other programs in Windows 7 can use ntdll.dll.  I tried to copy the WIndows XP version of ntdll.dll in the local folder on the Windows 7 machine containing my LabVIEW application, but this has not fixed the problem.  And when I look at my application in the dependency walker tool, I see that he is always looking in the ntdll.dll file in the WIndows\System32 folder and not in my local folder.  Yes, is there a way to make an EXE LabVIEW built on Windows XP on Windows 7?  Or I have to do a version for Windows XP and one for Windows 7?  Still, I am using LabVIEW 8.6.

  Thank you

  Keep in mind that LabVIEW 8.6 is not officially supported under Windows 7.  You may want to consider switching to less than LV2009.

• Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  250GB_DRIVE system name
  System manufacturer HP Pavilion 061
  EG705AA-ABA M7265C system model
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 4 GenuineIntel ~ 2800 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.17, 20/04/2006
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  250GB_DRIVE\HP_Administrator user name
  Time zone Pacific Daylight Time
  Total physical memory 072,00 MB 3
  1.55 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.83 GB
  Paging file C:\pagefile.sys

  Hello

  The ASR (automated system recovery) tool must have a disk for restoration purposes. The best option, if you really want to use ASR, is a floppy of USB external as suggested by chrisamiller.

  You can also follow this procedure to create the ASR files without the floppy drive and then copy them to another location to create a floppy disk or, if you're lucky, your PC can boot from a USB key (I never tried to start ASR on a key, do not know if it will work or not, but it might be worth it) :

  "You can"trick"the ASR in the race without a floppy drive." When it gets to the point where he writes on the diskette to cancel it. He writes two files, which are used for recovery, in the Windows\Repair directory. After completing your ASR copy these two files (files asr.sif and asrpnp.sif) to a network location and then make the diskette also. Make sure you update your disk whenever you make a new ASR or your backup will be watered.

  Or, you can use a USB floppy drive. It is sometimes the only option, especially if you need to install SCSI or SATA drivers during the recovery. »

  a: when you start the backup, it may be in Wizard mode. Follow the link to the Advanced Mode.
  b. Backup tab.
  c. click on the box next to the drive you want to back up so that it has a blue box.
  d. backup media or file name: Browse.
  e. Select a new file name on your CD.
  f. start the backup.

• Is there a way to make the LPT1 port EPP in Windows?

  Original title: is there a way to make the LPT1 port EPP in Windows?

  I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Windows?

  Hi RonaldEchols,

  ·         What is the model number of the device (printer)?

  ·         You use what version of BIOS (Basic Input Output System) and the motherboard?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Is there a way to make the character will blink or squint with one eye?

  Hi all!

  Is there a way to make the character will blink or squint with one eye? For example, in the 'Customize-> head' - Section only, I can customize some points on both eyes at the same time, but I have not found a way to make the character 'close' one eye so that it looks as if it is kind of flashing. It is even possible to do it with fuse... or IM just in the wrong place?

  Thanks in advance!

  Fabian Hey!  Fuse face expressions are more than one aspect of this face when you ask 'preview' it have rather intended for the laying of the real face.  We generally recommend leaving the fuse facial expressions and make laying in Photoshop, once you get there!  Here is a screenshot showing where you can access controls of the face in Photoshop.  That being said - I didn't "think that we have a unilateral wink or blink in fuse or Photoshop at the moment.  Might be interesting to post an idea in the forum of ideas for "better facial posing?"

  1. Select the 3D layer in the layers panel
  2. Select the skeleton of the character in the 3D Panel
  3. In the properties of the Panel change to the tab 'face '.
  4. Select an expression of search results
  5. Adjust the expression using the sliders and the offsets

  

• Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX?

  Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX? Just passed from the CS6 in the CC, and it is very difficult to see when they are in fact seen visible.

  Apart from excellent advice from Terri, there is no way to really change how the paths appear - nevermind, I could use those more visible as well.

• I have 300 pictures in the section 'develop' Edition. I would like to make all B & W. is there a way to make all B & W rather than one by one?

  I have 300 pictures in the section 'develop' Edition. I would like to make all B & W. is there a way to make all B & W rather than one by one?

  Hi Kates,

  You can always apply the same develop settings of an image at all.

  Please follow this link and it should be useful:

  https://helpx.Adobe.com/Lightroom/help/develop-module-options.html

  Please let us know if this helps

  Kind regards

  Tanuj

• Is there a way to make extensions compatible with Adobe CC 2014 EB3 HTML?

  I build extensions for Creative Cloud using the free plugin for Eclipse. Is there a way to make my futureproof extension for CC 2014? How?

  Read this article: http://bit.ly/1yAR0T9

  He can help out you. There are only a few changes in the manifest.xml and the installation of the extension folder.

• Are there other ways to make more than 1 kaycode instead of doing one thing to switch-case

  OK, naked with me, because my English is not so good. And I'm still not a professional have

  I did a dance game. A game that objects will fly up to the target and you must press the right keys for them. I know this is kind of the issue on several keypress thing. But I tried to search on them. I still can't understand. And... because I'm almost done my project, but the abovemultiple-keys -How-to-do- it, I might have to recreate everything, start from 0.

  I made a function to put on screen the CSM and managed by a class.

  Then, I made a function to detect if the target hit to the right position and you press the right keys.

  Also, if you press the wrong score will be decressed.

  I "did not only a fuction detect keys and tell what to do.

  So my question is "Is there other ways to make more than 1 kaycode instead of doing one thing to switch-case, for example?"

  It is a part of my code.

  var p1:Number=37;// 37Left(Left)
  ///
  
  function makeLvl(e:Event):void
  {
            if (sTime < sTempo)
            {
                 
                      sTime++;
            }
            else
            {
          
                      sTime = 0;
                      if (SelectedLvl[sArrow] != 0)
                      {
                                var currentArrow:MovieClip;//this will hold the current arrow
                                if (SelectedLvl[sArrow] == 1)
                                {
                                          //place a left arrow onto the stage
                                          currentArrow = new A1();
                                          //set the _x value of the arrow so that it is in the
                                          //right place to touch the receptor
                                          currentArrow.x = 120;
                                          //set the arrow's y coordinate off of the stage
                                          //so that the user can't see it when it appears
                                          currentArrow.y = 400;
                                          currentArrow.arrowCode = p1 ;
                                          addChild(currentArrow);//add it to stage
                                }
  ////
  
  
  
  touchL = false;
  
  ////
  
  for (var i:int = 0; i<numChildren; i++)
            {
                      var target:Object = getChildAt(i);
                      if (target.arrowCode != null && target.hitTestObject(mcReceptor))
                      {//if the object is an arrow and the receptor is touching it
                                if (target.arrowCode == p1)
                                {//if left arrow
                                          touchL = true;
                                }
  mcTxt.txtScore.text = 'Score:  ' + score;
            mcTxt.txtCombo.text = 'Combo:  ' + combo;
            mcTxt.txtScoreString.text = scoreString;
  }
  ////
  stage.addEventListener(KeyboardEvent.KEY_DOWN, checkKeys);
  function checkKeys(e:KeyboardEvent):void
  {
            //if the left key is down and no left arrows are touching the receptor
            if (e.keyCode == p1 && ! touchL)
            {
                      changeHealth(-10);//make the health go down
                      combo = 0;
                      scoreString = 'Bad';
            }
  beginCode();
  ////
  
  
  
  

  I try to put a table and display the number to fit it in, but no luck.

  Maybe I used the wrong table?

  Any ideas? Any suggestions? -Please...

  Thank you so much.

  This may be more advanced than what you're ready for, but it is a way to do

  http://blog.Iconara.NET/2008/03/30/separating-event-handling-from-event-filtering/

  I actually did this with a 'chain of responsibility', where each link has a reminder of determineResponsibility and the handleResponsibility callback. If it does not have responsibility (because she is not responsible), it sends the request on the following link in the chain, which manages or does not work. If you are not familiar with a reminder, it is a variable of type function so that you can change what the function is called repeatedly.

  To clarify, you must provide the first link in the chain, a reference to the event, then call something like a method process() with a reference to the event. This would call determineResponsibility(), which would look at the event to see if the features of the event are what you want. If it returns true, it would be called handleResponsibility(). If it returns false, you would call process() on the following link. The advantage of this design is that you can add and delete links to manage the changing needs of your system. For example, if the character hits something that disables the good movement until the user presses the arrow to the left, remove the link to the right arrow until the user presses the left arrow, then turn on again.

  Post edited by: Amy Blankenship

• Is there a way to make a custom brush vector sweetness meet at begging and end the race?

  Is there a way to make a custom vector Brush softness meet at the begging and the end of the race, as a circle?  I am trying to create smooth circles with a brush and Wacom.  I want a brush rather than a perfect circle of mathmatically with a perfect line weight-weight, but I don't like how to join two beginning and end.  I like the slight variations of the human imperfections we get when using a vector Brush, but there must be a way to make the joing points smoother look, rather than a title error after the fact, right?  Is this possible?

  The image below illustrates my attempts to make it as smooth as possible joint, but it still seems too as it was not meant to be.

  I use CS4, Mac OS10.8.4

  

  Thank you!

  You'd be better off drawing with the pencil tool, applying a standard race and then using a profile of race or the width tool to create the vocabulary of the race.

• is there a way to make a website in flash, the client can change?

  is there a way to make a website in flash, the client can change? If this isn't the case, which is the best tool to use?

  Thank you!

  Yes, but you must think in terms of creating content elements that are defined by external data and content such as files, xml, a data and images loaded... and possibly a UI for the client to do the easy editing (otherwise you have to train how to change data/content items).