Is - this too ambitious? Tabular no-show with interactive report in the subregion, showing the latest entries.

Similar Questions

• 4.2 - column link works only with interactive report (IR)

  Greetings-
  
  I have a screen with an interactive report (IR) and a tabular report on it. There is a radio button used to switch between them, of course, both of them have conditional logic based on this button. If the tabular report is the default value, everything works fine. If the interactive report is the default, then the 'link' on the IR used to display single details comes in white.
  
  Note that if the IR is by default, but you switch to tabular and then back to IR before trying to put in place the single record view, fine. It's almost as if something is not be instantiated unless the table view is loaded.
  
  The option button and the two reports are in the same region.
  
  Anyone has any idea on this?
  
  Thank you
  Scott
  
  Published by: DenverScott on April 30, 2013 09:14
  
  Published by: DenverScott on May 2, 2013 05:31

  OK, I looked inside. It is a common problem, but you have reached a particular example of this, because it seems that you need not the value of P2_REPORT_SELECTOR in your SQL for IR.
  BUT do you it because you have on your health.

  So, there are two simple ways to solve this problem. As I mentioned previously.
  1. you must fill in the field "Page elements must send" in the IR with P2_REPORT_SELECTOR
  I did it.
  What it does it does the value of P2_REPORT_SELECTOR available in persistent session state so that the AJAX call can seen that the condition is met and that the report should be displayed/rendering.

  2. the other option is a calculation on P2_REPORT_SELECTOR who rule on 1 when P2_REPORT_SELECTOR is set to null. I left this calculation, but it set to never right now. It's the same effect net because calculations save values to persistent session state.

  Without the value of P2_REPORT_SELECTOR to persistent session state, the value is only in memory during rendering. That's why the page renders correctly. BUT so that the report to switch to the display of the page one needs to know the value of P2_REPORT_SELECTOR and the value was NOT in permanent session state, therefore not available for the AJAX call, which updates the State.
  Same thing when VC has been sent, it saves the value of P2_REPORT_SELECTOR in persistent session state. Same as switching the button radio.

  I hope this help out you.
  -Jorge

• I can't open the program with an update to the latest version after that effect does not appear, to me, character animation program

  I can't open the program with an update to the latest version after that effect does not appear, to me, character animation program

  

  non-active way?

  The only way I've seen to solve this problem is to uninstall/reinstall After Effects

• Problem with interactive report

  Hi all

  I use Apex 4.2

  I have an interactive in which I activated the filtering and sorting.

  When I click on one of the column in the interactive report, saying: "LAST NAME", it shows me the filtering and sorting options drop down.

  The poster also available name drop extracted from the query, but it shows me some range of name pronounce A - C only.

  I have family with starting with another letter also names, but those names are not displayed.

  For some columns displays the values of A to E, but not the full list.

  How to display the entire list in this fall down.

  Kind regards

  Jean-Louis Patel.

  Hi Alice,.

  Because of interactive report performance, it loads only a few filters.

  If you change the column definition for the column, under set the Filter Type of column to one of the other options like 'User defined list of values to exact match filter' from the list of values.  You can then specify the query used to generate this list.  You could use something like what listed below to grab the first 20000 records.

  Select *.

  from (select name

  WCP

  em order by name)

  where rownum<=>

  But don't forget, it will always affect your performance of interactive report page.

  Or alternatively, you can use this link:

  http://tpetrus.blogspot.in/2012/05/interactive-report-filtering-in-apex.html

  -Sunil Bhatia

• Why, when I open Firefox 9.01 this I get a message that I don't have the latest version in the help - about Firefox said I do?

  There are / were three problems:
  1. why, when I open Firefox 9.01 this I get a message that I don't have the most recent when version help > on Firefox said I do?
  2 also, with version 8 of xx, I was unable to open a new window with a right-click, until I upgraded to 9.01. (Old problem now, but I'm curious).
  3 when I tried to uninstall the old version of the uninstall program told me that I had to close the open version, but it was closed according to my taskbar. I also have this problem with Thunderbird.

  1. you are using the latest version which is Firefox version 9.0.1

  From your description, it seems that if you still have the old start page for Firefox http://www.google.com/firefox hosted by Google as your homepage. This old default home page is no longer used as topic: Home is in use since Firefox 4.0

  Ignore the message, change the homepage of topic: Home, replace it with another page or leave blank.

  http://support.Mozilla.org/en-us/KB/how+to+set+the+home+page

• Screensaver connection error: Direct3D 9.0 is required to run this screen saver, but cannot be found. Please install the latest version of DirectX and try to re-run the screen saver.

  Original title: error Login screen saver.

  When at the login screen Windows screen saver is not running. The circle of 'thinking' of the mouse pointer starts to turn, but it just goes back to the login screen. I created all 4 strings in the HKEY_USERS\. Default\Control Panel\Desktop\ including ScreenSaveActive = 1, ScreenSaverIsSecure = 0, ScreenSaveTimeOut = 60 and SCRNSAVE. EXE = C:\Windows\(our custom screensaver). Instead of our custom screensaver I also put the windows mystify screensaver in the key but the Directx 9.0 3D error pops up. Any suggestions?

  Note: The Customs and the Windows screen savers that work both when a user is connected.

  UltraVNC seemed to work very well with win 7, but the only software of remote that I know works without fail and control on a very consistent basis, is the enterprise version of RealVNC. Yes, it costs money, but it is comparable to microsoft RDP, with additional features. They have a free version that does not cost any money and it's missing a few features. In a corporate environment, I am sure that this version is a no no.

  ' Windows XP ' My Pictures Slideshow "screen saver. ssmypics. SCR

  See: http://www.google.com/support/forum/p/Picasa/thread?tid=78ca9579242d3682&hl=en for more details

• Norton 360 is ready with SafeWeb to get the latest version of firefox?

  Some time ago, I received a warning to wait with the installation of an update of firefox because some parts of Norton 360 - I think it was SafeWeb - would not work. I later received a notification from Norton Norton is now online with Firefox. I have the same problem with Norton 360 again if I will update to the latest version of Firefox?

  Yes Norton 360 v5 is fully compatible with Firefox 9, see

  • http://community.Norton.com/T5/Norton-360/Firefox-9-support-for-Norton-toolbar/TD-p/615573

  Firefox 9 is here

  • getfirefox.com

• I had to remove my suite CS6 Design and Web to download and install the new LR6 and impossible to find a link to download the suite again and re install. This after having spent 5 hours with a technician in the CAT to do the upgrade of LR of CC.

  Where can I get the link to download design CS6 and web premium? I was forced to delete/uninstall my whole suite in order for the CC app download and install lightroom 6.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• I get this message on my home screen: you are not on the latest version of Firefox. Update today to get the best of the Web!, however, I have the version 9.0.1, so why do this message will leave?

  FF seems to work OK, although some add-ons say that they are not compatible with this version of FF, but my computer (same version) at work that is also running XP Professional, run these add-ons.

  Hi greghaus,

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. This page is no longer maintained by Google.

  You should try to change your home page:

  topic: Home

  If you don't know how to change the home page, you should take a look at the Knowledge Base How to set the home pagearticle.

  Hope this helps

• How to create editable report manually even as a default with on report send the page

  
  Hello

  Is it possible to create the report updatable manully would even editable report by default.

  I created 4 report can be updated in a single page, but submits the entire page when adding empty lines.

  I need to add additional blank lines using dynamic measurements or any otherwise with the page request.

  Thank you

  RJ

  Thank you Lakshmi,

  His work!

• Using ROWNUM with interactive report

  Hi guys,.
  
  I want to use #ROWNUM # to add the attribute 'id' to 'tr elements '. I can do that for classical report by changing the template. But I can't change the model for IR (interactive report). I add < tr #HIGHLIGHT_ROW id # = "#ROWNUM #" > to the report model classic section 'before each Row.
  But I can't do that for IR. You have an idea?
  
  Kind regards.

  You don't really have the code. From your code, it seems as the parameter 'el' is the DOM of your TR element, and therefor there is no need your long selector chain.
  Just do the DOM element in a jquery object and start from there:

  $(el).children("td[headers='STARTNOTIFICATIONID']").text()
  

• Yellow triangle warning icon in interactive report Apex 5.0 - what is - this?

  I have a very simple application with a few interactive reports. The application was developed in 4.2 Apex using the theme of productivity Applications. It has been upgraded to Apex 5.0 and I spent so that it uses the new universal theme. During the execution of the IR, the first column in the report contains an icon in the shape of a yellow triangle with an exclamation point inside, just the one in the middle of a frame surrounding the data in the report. I have no idea why this icon is there and assume it's some kind of warning icon. The report works very well and there is no message any indicating why the column with the icon is there. The Advisor gives no clue either so can someone tell me what it is and why it is there? Demand for production still works with the original theme 5.0 Apex and does not suffer from the same problem. Here is a link to a screenshot showing what it looks like

  http://i.imgur.com/6jSEBu3.PNG

  Thank you

  Steve

  Hi Steve,.

  I think it's the model of the region:

  

  Jos

• How can I force a line break to show in an interactive report

  Hello

  I use Apex 4.2 and Oracle 11.g

  I have a column called 'Transaction Details' that I display in an interactive report.  The report text display column selection As a value "Standard report column.

  The report column is selected in a table varchar2 column called transaction_detail.  I build just the table as well.  The transaction_detail of the table column is filled with a procedure with the following code:

  Insert into mail_log (transaction_type, transaction_detail)

  Values ('operation FTP',

  ' Filename =' | ' p_image_filename |

  "& lt; BR / & gt;' | "Description of the event =' | ' l_event_description);

  The code of procedure can be easily changed.

  The report does is display: Filename = myfile.jpg < br / > the event Description = description

  I tried to use Chr (13) in the procedure instead of the html characters and then tried to replace the Chr (13) in the apex with html characters.  Instead of simply select the column:

  transaction_detail

  I tried:

  , REPLACE (transaction_detail, Chr (13), "& lt;") BR / & gt ;')

  but I couldn't get past an Apex error: ORA-12899: value too large for column 'APEX_040200 '. "" "" WWV_FLOW_WORKSHEET_COLUMNS '. "" DB_COLUMN_NAME' (size: 49, maximum: 30)

  If Apex shouldn't be able to interpret the < br / > like a new line if the column is a column of report Standard?

  Thanks for looking at this.

  This is therefore a simple approach, I used in the past and can work for you.  Switch to the Chr (13) and in the IR columns use the HTML Expression like this:

  #COLUMN_NAME#

  No need to change the column to column Standard report either.

  The police by default for the content in the

  la balise est monospaced, mais si vous n’aimez pas que, il peut être changé.  Le pre respecte également les espaces présents dans vos données.
  
  Peut-être que cela aide.
  Merci
  -Jorge

• Ideas for work around ORA-06502: character string buffer too small on the interactive report

  Hello

  It comes to Apex 4.2.  We try to create an interactive report.  The report is for something similar at a follow-up time.  We try to concat a comments column as the sum of the hours.  For example,.

  Select TASK_NAME, sum (HOURS), to_char (XMLAGG (XMLELEMENT(E,E.COMMENTS ||) ' : ')). Extract ('//Text ()'). GETSTRINGVAL()) USER_COMMENTS of...

  This query works fine if we seek only to a window of 1 week.  The question that we live, when we expand the scope of the query to include data from 3 months, we hit ORA-06502 interactive report.  If we remove this column from the interactive report, then the report works very well.

  Anyone has any ideas on how we might be able to work around this problem?  I'm guessing we're reached the limit of 32 k on the report.  Ideally, we would show just the last X number of comments and then have a link to show all comments

  Any help would be appreciated

  Thank you

  Mike

  ListAGG raises an ORA-01489 for varchar2 > 4000 bytes

  OP has an ORA - 06502--> IR is running within a limit of 4 k / 32 k.

  quick fix: wrap USER_COMMENTS ListAGG in a substr (..., 1, 4000)

  Longer solution, use a subquery to modify comments based on ROW_NUMBER() (IE after the nth line, change the null)

  with
  -- simulating data
  t as (select task_id, sysdate - lv as date_entered
    ,round(dbms_random.value(1,24)) hours
    , '-*' || lv || '.' || task_id || '*-' as user_comments
  from ( select level as task_id from dual connect by level <=10 ), (select level lv from dual connect by level < 1000)
  ),
  -- modify data
  modified_data as (
    select task_id, hours, date_entered
      ,case
        when row_number() over (partition by task_id order by date_entered desc) < 5
          then user_comments
        else null
       end USER_COMMENTS
      from t)
  select task_id, sum(hours) total_hours,
    listagg( user_comments  ) within group (order by date_entered desc)
    || case when count(*) >= 5 then '! MORE COMMENTS !' else null end
      as user_comments
  from modified_data
  group by task_id;
  

• Dynamic action with refreshment area interactive report

  Hello!
  
  I use APEX 4.02
  
  I have a page with 2 regions.
  Region1 is a form (of entry)
  Region.2 is an interactive report on the same table as region 1
  
  When you enter values in the form I'm trying dynmically similar research records in the table with the interactive report.
  
  I made a dynamic action on the change of form fields that must refresh the interactive report region. I can see this one fires if I add an alert to debug if it fires.
  The dynamic report is based on a query with bind variable pointing to the fields in the form, for example
  where
  Field1 =: P2_FIELD1
  
  
  It works fine on the page loading, so no action is triggered, but I see the lines in the region of report are the ones I'm looking for.
  The updating of the report area does not work, but it is never nice and/or showing the correct data after a change of form fields, if it looks like the dynamic action "refresh the region" does not work on the interactive report.
  
  Any ideas why it can go wrong?
  I want to solve this problem using standard dynamic actions and preferably not via PL/SQL or JS, should be possible if I believe documentation... ;)
  
  See you soon
  Bottom
  
  Published by: bklerk on 26-apr-2011 03:07

  Hello

  Check this example application
  http://Apex.Oracle.com/pls/OTN/f?p=39830:38

  You can download and check the source

  Kind regards
  Jari