ISE and AD Password expiry Notification and allow the user to change

Similar Questions

• Difficulty the front Dimension of the array, but allow the user to change the size of the array

  Hello

  I know there are a few other posts on table and scroll bars but mine is a little different. I want to have the physical size of the fixed table control and allow the user to change the size of the array as required and a scroll bar if the number of elements exceeds the specified physical dimension. I wouldn't mind if, at the end of the scroll bar, the user sees an uninitialized element.

  Thank you very much

  Hello

  The problem I have with the property Num Row node is it seems to replace the scroll bar. Whenever I try to change the line number, the table automatically resizes its physical size on the front and the scroll bar has no effect.

  However, I solved the problem by taking row completely digital. I just said if the table size is > to a constant value (i.e. 3), add a scroll bar and my front panel dashboard to be a size larger than what the value of this constant is size. Once I begin to add values in sequential order and I get to the fourth value, the scroll bar is added and the scroll bar has a feature where it adds an element of null for you, so if I fill this null element I just increased the size of the table and another null element appears underneath.

  Thanks for the help

• Allow the user to change the password on the login page.

  Hello
  
  How to allow the user to change the password on the login page?
  
  Thank you
  
  Gargi

  Elodie:

  The appeal of the procedure should be as below

  apex_util.CHANGE_CURRENT_USER_PW('hello');
  

  CITY

• Upgrade to Acrobat Pro XI / Adobe Reader XI and allowing the user's rights

  My business is a bit backwards on the software updates and I will ask for Adobe Reader XI thrust out company-wide since then allows the user to save a completed PDF form.

  Right now I use Acrobat X Pro and suspect I will need to upgrade as well.

  My questions are:

  • With the newfound ability of the reader to finally be able to record a filled in form, how this effect the scenario of "enable user rights"?
    Is it necessary if the entire company uses Adobe Reader XI?

  I did a test in Adobe Reader XI, and of course, I was able to save a completed form... BUT I couldn't not digitally sign the form.

  • Where is the activation rights is always required?
  • Or is it because the form has been designed in Acrobat Pro X?
  • Acrobat Pro XI work around that?
  • I know I don't no need to upgrade to Acrobat Pro XI to continue to make shapes, but should I?

  Thanks for your feed back, and I look forward to reading your responses

  Yes, in order to activate the reader digitally sign, you should always activate with Acrobat Pro or LiveCycle Reader Extensions.

  Acrobat 11 has a number of improvements related to the forms of creation. Two of the largest partners about how configure the tab order of fields are worth the cost to upgrade. You can now select several fields during the reorganization and turn off the auto arrange making Acrobat.

• copy the select value in the textfield of LOV, and allow the user to modify

  Hello
  I have a datablock with 20 records and each record has a comment (say field_comments) fields. I would like to allow the user to choose LOV populated predefined comments (say lov_comments) and add a few additional comments after they choose the value of LOV.
  
  I created a LOV and added the return type 'field_comments' in column mapping properties. When the user clicks a button, LOV opens. They choose the value of the LOV and the value goes to the field 'field_comment '. The problem with this approach, the user cannot add their comments after selecting in LOV.
  
  I tried this too much. I created another area of non-visible text (i.e. fake). In the LOV, I added "dummy" field as returntype. In the dummy field, I created the trigger 'After the CHANGE', which basically says: block. field_comments =: block. Mannequin.
  
  But, the user must click another field to display the value selected from the LOV. The values of the 'field_comments' is not being updated as soon as the user click on the 'OK' button in the LOV.
  
  I'd appreciate if someone could give me feedback and help to solve my problem. Thank you for your help.
  
  I thank.

  Well, I tried exactly what you posted and it allowed me to SELECT from LOV, then CHANGE/ADD new text in front of returned value in the field. He recorded in the database and questioned without any problem.

  Your article is allowed to INSERT/update? If this isn't the case, then set yes "Update/Insert allowed" and attach your LOV to the element and set "post to list" No.

  You can also see if you have any validation done on WHEN-VALIDATE-ITEM trigger or after CHANGE which will fail because you change LOV populated values.

  I hope that helps!

• Allow the user to change the items in web application that they have not submitted

  Is there a way to allow a user to change/remove the elements of web app that they have not submitted?

  I did more than 400 pieces for the user via a .csv spreadsheet. I want the user to be able to change or remove these via an editing page of web app, I'll set up, but because I downloaded the .csv file, apparently, that another user cannot do this.

  At present, the only way that I know that this is so by the user submitting each element individually.

  Anyone know of a way to attribute everything to this user as if what he presented to them? Perhaps via the .csv file?

  Yes. In admin, you can change each element of WebApp to be attributed to a customer with the "presented by" in the section 'other Options '.

  You can also import/export this value, but in the CSV file, it is labeled as 'EntityId' - and you must use the system ID/ID of the entity of the client here.

  Otherwise, to allow anyone (who is connected) to change any element of WebApp, you must change the setting in the configuration of this WebApp by checking the option "anyone can edit items.

• WCAG 2 compatible code allowing the user to change the text size

  Hello

  I'm looking for an ADA Section 508/WCAG 2.0 compatible excerpt of code that will display the font size icon (two different sizes of A) a simple 'more' or 'less' sign which would allow visually impaired and sighted people still to increase the size of the text display up to 200%.

  Code samples or extracts would be much appreciated, we try to create alternative versions of 508/WCAG 2 of all our tutorials online which is normally based on flash and Adobe did not always accessible Flash entirely WCAG 2. According to my knowledge, but could be wrong, if so and someone can clarify that for me, this would be highly appreciated as well.

  For many years these features were commonly used on web sites, but there is little reason to do them now, because all browsers & mobile devices have built-in zoom features.

  • CTRL + (plus) will increase the size of the content.
  • CTRL + (UNMIS) will decrease.
  • CTRL + 0 makes normal again.
  • On mobile devices pinch-zoom gesture works on web pages and ebooks.  And settings user for increased text sizes. How do I make the text bigger and more readable on Android

  If you had to make buttons to trigger the largest text on your HTML pages, you need JavaScript to call a different style sheet for the larger letters and another for small fonts size.  This will not increase the size of the page or other objects on the page.

  • Less than 42% of the desktops support Flash.
  • Browser Firefox blocks the plugin Flash player for security reasons.
  • Flash has zero support in iPad, iPhone and Android devices.
  • Adobe will soon be renaming Flash Pro at CC Animate.
  • Content Flash on the web is dead.

  Nancy O.

• Allow the user from code java stand alone

  Hello
  I have a requirement where I need allow a user in IDM if it is in the disabled state. I wrote the java code that connects to the IOM server with username and password and made the necessary. But I have a new thing to implement here in which if the user status is disabled, then we call the user activate and allow the user in IDM DB. Please help in locating the method appropriate and API for this.
  
  
  Thank you
  Kalpana.

  Check this: http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/oracle/iam/identity/usermgmt/api/UserManager.html#enable_java_util_ArrayList__boolean _
  and as it happens; Once you activate a user; tasks to activate resources would be triggered automatically.

  -Marie

  Published by: Bikash Bagaria on February 15, 2012 11:34

• Allow the user to update the fields between some time. If not just to see

  Hi Experts,
  
  I was thinking about the following example. Can I know how can I implement this in project web ADF.
  
  Allow the user to change the shape of the page on some time interval of time rest allows them to view only. I can put this check in time of connection or the loading of the page. How ever how to apply this connection between the cut-off time. Can I disconnect all users of the system to time limits and ask them to re-login again. In the affirmative. How to implement that.
  
  Thank you.
  
  t

  A brainstorm of my response, possibly other posters will give a better answer...

  Is the requirement actively disconnect everyone once the time-out occurs, or can at least delay to the next request for each client?

  If the old I suggest to use some sort of component Ajax poll on the page that keeps checking with the server if the delay has occurred. Maybe later if a Java EE filter or listener to detect the expiration time. In both cases once the delay has occurred to redirect the user to the adfAuthentication servlet will disconnect the current session/user.

  CM.

• How can I allow the user to enter the 5 digits in an inputText and who must be a number.

  Hi Experts,

  JDev 12.1.3.0.

  How to allow the user to enter only 5 digits for an inputText and there should also be a number?

  Thank you

  AR

  Try with:pattern="[0-9]{1,5}"

  Dario

• jdev11 selection tab and allow the customization of the user on the bug of the Session.

  If you enabled customization by the user for the duration of the session, then what ever user edits a page remains the same through the session.
  That is to say. Boxes of Panel, advanced the query criteria, the visible columns in tables in the collections Panel etc. revealed.
  
  The problem is that you can't customize the properties to be kept or not:
  ++ Developer fusion for Oracle ADF & 34.3 user customizations Configuration guide: ++
  ++ Note +: If you have activated just the session persistence, then all attributes of the values given in table 34-1 will be persisted in the session. +
  It there is no way to substitute it either globally, or on an instance.
  The biggest problem is that if you have a business logic on these components appearance or behavior you cannot override user settings.
  
  Is this a bug?
  Shouldn't logical business methods replace the user personalization settings?
  
  Customization of the user for the duration of the session will be configurable?
  
  Details: [http://adfbugs.blogspot.com/2009/09/tab-selection-and-enable-user.html]

  Hello

  Is this a bug?

  Don't think. I guess your business logic depends on the disclosure statement, which is usually reset after each navigation works to a page. Using persistence of change you explicitly allow the user to keep the changes. If your business logic cannot rely on a State has changed.

  The enhancement request proposed to prevent changes of the perisisting its just components. I'll drop a.

  But it is not that you cannot override the persistent information for a component. You can use the ChangeManager API that is exposed on the ADFFacesContext to substitute information persistence

  http://download.Oracle.com/docs/CD/E15051_01/apirefs.1111/e10684/Oracle/ADF/view/rich/change/changemanager.html

  For example, with a change of disclosure event:

    boolean isDisclosed = < whatever you like to set >;
    //Record a Change for 'disclosed' attribute
    AttributeComponentChange aa =
    new AttributeComponentChange('disclosed', isDisclosed ? Boolean.TRUE : Boolean.FALSE);
    AdfFacesContext adfContext = AdfFacesContext.getCurrentInstance();
    //set disclosed state to component. Here you override the user choice
    adfContext.getChangeManager().addComponentChange(getFacesContext(), event.getSource(), aa);
  

  Frank

  Published by: Frank Nimphius, on September 30, 2009 15:20

• Is there a way to create a plan of action in vCAC and allow a user to select a network?

  Hello

  We have 30 different VLAN used for various tasks within our Organization. I was wondering if there is a way to create a unique model vCAC and alow the user to choose which virtual machine network join to (at the time)?

  It's not like I can use a vCenter customization specification and just set up 'network-> Custom Settings-> interrogate the user'

  Or I have to create 30 Blue each connected to a different network?

  vCAC Build 6.0 - 1720522

  Thank you

  Tom

  This will show you how do

  [virtualjad.com]: vCAC dictionary of properties: customize applications for Service with dynamic Menus

  You use custom properties to achieve this. You won't need 30 blue, build a logic and apply it on a plan of action.

• With the help of A6, must create menu screen which allows the user to click a button creates a branch to other screens and return to the main menu. When returning to the main screen on which button will be gray or inactive.  How can I do this?  I created

  I am trying to imitate a piece of equipment.  I need the user to be able to click on the specific buttons that have the user to another or screens.  After viewing these screens that will be the user to the main screen where the user which buttons were pressed and which still needed to be pressed.  I create buttons image with the 3 States - who has worked except when the user returns to that slide is reset to zero, and if the user does not see the 3rd State of the button.  How can I get this 3rd State of stay after the user returns to the main screen?

  You can not 'keep' a State, that's what I said in my first answer: "you can create an image with that look of '3' State, make it invisible and show it with the same action when a button is triggered. You will need to insert extra that third picture, first hide it out and make it visible to the advanced action, which I explained. I called this additional 'Done_one' image in the example. The three States you're talking about are in a totally different way to Captivate: for down, more and up-state. You can just tell Captivate to keep a low State, it will be down when the button is pressed. Where my explanation of an additional image.

  No need for all the variables. Looks like you have a lot to learn about variables and advanced actions. I don't see another easy way to achieve what you want. It is not so difficult, tons of examples on my blog.

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.