Issue of log file.

Similar Questions

• Log file for the security issue on the form?

  In 11.1.2 has created a new application which reflects a previous app but when non-admin users, enter the app they receive this error when trying to access the form.
  
  «Security and/or filtering resulted in a necessary dimension is not represented on this data form.»
  
  I have at least read rights on the scenario, the Version and the entity (I rename the office).
  
  Worse that planning has encountered an error check the log... where is a log file for this error? I can solve it much easier if I know what size the user/app is not happy with...
  
  OK scratch that forget the newspaper, found that for some reason any data base/filter in the EA reflects not what in planning security. How to correctly push refresh to Essbase? The database admin/refresh planning seems not to do the tour.
  
  
  HEY THERE' S MONDAY... read messages before found one of our custom dimensions has been verified for safety while he should not have been... everything fixed.
  
  Thank you
  
  JTS
  
  Published by: jts July 11, 2011 06:52
  
  Published by: jts July 11, 2011 07:07

  fixed

• Can someone help me interpret the results of a log cbs.log file?

  My laptop worked little strange - gel sometimes and only excessively slow.  I ran chkdsk /f checks and / r.  Both went well.  I then ran sfc/scannow.  The results of this analysis are displayed below.  I'm not a pc expert, so I don't know if I'm all together or if there is something else, I have to do.  Specifically, the last line of the cbs.log file says, "Verify and Repair Transaction completed. All of the files and registry keys listed in the framework of this operation were properly repaired".

  Any help would be appreciated!  Sorry for the text copy/pasted for a long time.  I cut about 99% of the out and about 1% of the folder (due to a limit of 60 000 characters) just left.  I couldn't find a way to attach a file.

  Thank you!

  POQ 64 ends.

  2012-10-09 22:06:25, Info CSI 00000171 [SR] check complete

  2012-10-09 22:06:26, info CSI 00000172 [SR] components check 100 (0 x 0000000000000064)

  2012-10-09 22:06:26, transaction Info CSI 00000173 [SR] beginning verify and repair

  2012-10-09 22:06:37, info CSI 00000174 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

  Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

  2012-10-09 22:06:37, info CSI 00000175 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:06:40, info CSI 00000176 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

  Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

  2012-10-09 22:06:40, info CSI 00000177 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:06:40, info CSI 00000178 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

  2012-10-09 22:06:41, Info CSI 00000179 repair results created:

  POQ 65 begins:

  2012-10-09 22:17:24, info CSI 00000301 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:17:24, info CSI 00000302 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

  Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

  2012-10-09 22:17:24, info CSI 00000303 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:17:24, Info CSI 00000304 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

  2012-10-09 22:17:24, info CSI 00000305 hashes for Member file? \C:\Windows\PolicyDefinitions\inetres.ADMX are not real file [l:24 {12}] "inetres.admx": "

  Found: {l:32 b:DjclSPQ + c3ju7E53XXW47eR94SH7ICruHSUKg8YAkO0 =} expected: {l:32 b:3 T / Xc + 0 k/wBxJ4k/vlPd86jLOYtWOjRsHrz0hHH9H8s =}

  2012-10-09 22:13:42, CSI 0000027e Info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

  2012-10-09 22:13:42, CSI Info 0000027f WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

  Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:13:44, info CSI 00000280 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

  Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

  2012-10-09 22:13:44, info CSI 00000281 [SR] repair file corrupted [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

  2012-10-09 22:13:44, info CSI 00000282 WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

  Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:17:25, 00000306 CSI info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

  2012-10-09 22:17:25, info CSI 00000307 WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

  Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:17:25, info CSI 00000308 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

  Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

  2012-10-09 22:17:25, 00000309 CSI info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

  2012-10-09 22:17:25, CSI Info 0000030a WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

  Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:17:25, created results CSI 0000030b repair Info:

  POQ 127 ends.
  2012-10-09 22:17:25, all repairs [SR] CSI Info 0000030 c
  2012-10-09 22:17:25, CSI Info 0000030 d [SR] validation of transaction
  2012-10-09 22:17:25, transaction CSI Info 0000030e Creating NT (seq 1), objectname [6] "(null) '"
  2012-10-09 22:17:25, CSI Info 0000030f NT created transaction (seq 1) result 0x00000000, manage @0x14c4
  2012-10-09 22:17:25, Info CSI 00000310@2012/10/10:02:17:25.662 CSI perf trace:
  CSIPERF:TXCOMMIT; 143298
  2012-10-09 22:17:25, Info CSI 00000311 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  Hello

  As noted at the end of your message SFC/scannow points out that there is no rest
  questions that he can fix.

  More information on how to easily read the important information as SFC/scannow
  adds to the cbs.log.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  =======================================================

  Troubleshooting:
  
  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I opened my disk cleanup, he asks just files to do, I select and once it gets to "Setup logs files" it just closes. How can I solve this problem?

  Disk Cleanup doesn't work do not

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  (Try to run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup)

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------

  Then, check here:

  Disk Cleanup stops working and does not remove the files in Windows
  http://www.tips4pc.com/articles/computer%20Troubleshooting/disk_cleanup_stops_working_and_w.htm

  Drive serious cleanup problem in Windows caused by broken registration
  http://www.Winhelponline.com/blog/serious-disk-cleanup-problem-caused-by-broken-registration/

  Yet an another problem of disk cleanup
  http://www.Winhelponline.com/blog/yet-another-serious-disk-cleanup-issue/

  -----------------------------------------

  Good alternative to free - CCleaner - disk cleanup

  CCleaner - free
  http://www.CCleaner.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• OfficeJet 6700 Installation - error opening Installation log file

  Try to install the software for OfficeJet 6700.  All - tried delete reg keys, copy sw HD, download new drivers and run as administrator.  Have Win7 64 bit Professional OS. Windows doesn't have the driver get same error every time. "Error opening installation log file.  Verify that the specified log file location exists and that you can write to it. "Am about to return this article to Costco.  It can't be this hard!  What is the answer?

  Hey everyone - I finally understand how to solve this problem!  As they say, it's always the last place you are looking for!  All joking aside, this is how I did it.

  The problem is that HP setup.exe does not seem to be compatible with Windows 7 Professional 64-bit.  So, in short, the solution is to run the installer in compatibility mode Windows XP SP2.

  1. open computer and navigate to the Setup CD.

  2. do not Autorun or auto play installation.

  3. click right one open the CD from the computer.

  4 scroll down on the list of files on the CD until you see Setup with the HP logo next to it.

  5 right-click the program installation and in the context menu, select 'Troubleshoot compatibllty '.

  6. the resolution of the problems should open.  Select "try recommended settings.

  7. then, the troubleshooter should say it's solve problems and give you a button "Start the Program".  Click this button and the installation program should start normally.

  8. from here before the installation should work normally.  Although normal is sometimes nothing more than a laundry dryer set!

  My system is Windows 7 Professional 64 bit.  This kind of issue that happened to me in the past with other software installations, but I've never waited or he waits with a new HP printer!

  Thanks to the HP support people I talked about this during the last few days.  It is certainly something that should be documented. I hope that this article here will help others.  Let me know if it helps you!

• Unable to display the log file in windows 7

  Hi all

  for all of you who are familiar with the text game, I use customer gMUD a certain game. gMUD is able to record activity as a document that is readable by microsoft Notepad.
  so, one evening I played and connected my activity where the customer is located, for example c:\program files (x 86) \gmud
  After the recording session, when I went in this directory, the journal was gone! in fact, there were 2 newspapers, lets call them document1.log and document2.log
  I did some troubleshooting for:
  1. When you are prompted for a location to save a log, when I choose my office, the journal appears and I can read it just fine using Notepad. This means that there is nothing wrong with the ability of the client to write and record newspapers.
  2. When you are prompted for a location to save a log, when I choose the directory where is located, my client of mud and give a name, say document3, I see that document1 and document2 are there. I can now logging document3. but as for the previous 2 logs, when I open the directory in windows Explorer, it is simply not there. This means that the issue is consistent and I can reproduce it. and also that the logs are there, but I can't visually see it.
  3 tried setting the options files of the control panel to show all hidden files, but the documents don't show still in windows Explorer.
  4 tried to open the document via prompt back but the documents cannot be found.
  5. I tried running Notepad and navigate this particular directory but there is no .log files or .txt files.
  some other info:
  running windows 7
  used AVG at the time
  my last hint is that the writing of the flies in a "program files" folder is somewhat limited (not hidden) and there should be a way to document1, document2, document3 access. can someone please show me how?
  Hi Maraquet,
   
  Thanks for choosing Microsoft Community Forums.
   

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question; It is better suited for the IT Pro TechNet public.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro
   
  I hope it helps. If you have problems in the future regarding Windows please let us know. We will be happy to help you.

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• Redo log entries to the online redo log files

  Hello

  I'm a little confused about the redo log entries.

  I learned that LGWR writes redo log entries in the SGA, in redo log files in the following situation:

  -3 seconds after the last validation

  -redo log buffer has 1 MB

  -redo log buffer data 1/3

  When I take a transaction and if I change the wrong data, I have to cancel this transaction BUT the right now,

  What happens if the LGWR writes redo log disk entries?

  Is the bad transaction committed at all times?

  2791011 wrote:

  Hello

  I'm a little confused about the redo log entries.

  I learned that LGWR writes redo log entries in the SGA, in redo log files in the following situation:

  -3 seconds after the last validation

  -redo log buffer has 1 MB

  -redo log buffer data 1/3

  When I take a transaction and if I change erroneous data, I have to cancel this transaction at this time, BUT

  What happens if the LGWR writes redo log disk entries?

  Is the bad transaction committed at all times?

  DML changes are "permanent" after that VALIDATION is issued.

  When any COMMIT is issued, then changes can be undone.

• Why I don't see physical sql in the log file

  Hello everyone,

  I try to get the physical sql for one of my analysis on OBIEE. I copied and paste logic sql code into the editor of "PROBLEM SQL" on the Advanced tab, and check the log file. However, there is no physical sql code for this analysis. I find any other analysis. What can be the problem? Can he be on the physical tables / issue privileges etc.?

  Kind regards

  Dilek

  Hello everyone,

  I found the solution to my problem. Because I used the filter that contains the result of another analysis, physical sql code is not generated in the log file. When I remove it, it's ok. I'm going to how to change the filter condition. Then the problem is resolved.

  Kind regards

  Dilek

• AdobeGC.log files taking up my hard drive

  Adobe creates adobegc.log files that are filled with my hard drive. They are found in my appdata/temp folder.  How can I stop this?

  Our Engineering Department is aware of this problem and to deal with a future update of the plans. The following steps are a temporary solution until the issue is resolved

  On Windows

  Rename the .exe to .old file extension, and then restart the computer. The client is located at:

  C:\Program Files (x 86) \Common Files\Adobe\AdobeGCClient\AdobeGCClient.exe

  On Mac

  Move the AdobeGCClient to the desktop or remove and then restart the computer. It is located at:

  Mac HD > Applications > utilities > Adobe Application Manager > AdobeGCClient

  We are sorry for the inconvenience to those who have been affected by this problem.
  -Dave

• Adobe log files consume disk space

  Twice since Saturday, I received messages from system Windows to be out of disk space. I traced the issue to an accumulation of Adobe log files in < username > \AppData\Local\Temp C:\Users\ named adobegc < date > < time .log >. These log files are created at the rate of once per hour and most are about 6.5 GB in size, except the log files created between 03:00 and noon are 0 bytes. Usually, my 500 GB hard drive is about half full. I can remove the logs, but I don't know how to prevent them from accumulating in a first time.

  I have the following Adobe products installed:

  Acrobat CC

  AIR

  Creative cloud

  Dreamweaver CC 2015

  Extensions Manager

  CS6 Fireworks

  Flash Player 19 (NPAPI and PPAPI)

  Help Manager

  Illustrator CC 2015

  Reader XI

  First of all, this problem occurred on 26. Creative cloud had been updated to the latest version on the 24th. Adobe AIR and Flash Player are both set to day 26. No other applications have been updated recently.

  What should I do to fix this?

  Double post of:Adobe logs consume disk space

• Workstation9 &amp; VS2010 log file problem

  It is more of an irritant than as a serious problem.

  Just upgraded to Workstion9; but now, when I launch Visual Studio 2010 upwards, I have a message box titled "VMware", with the following error message:

  "An error occurred during the attempt to access the log file. Logging may not work correctly. »

  I was wondering if anyone else has seen elsewhere, or better knows how to fix?

  See you soon.

  Colin.

  My experience with this issue is a bit different, I only get the error when launching visual studio as a non-administrator. I throw VS as an administrator when you are working on an IIS Web site, the error does not come then. Looking at the box in connection shows the location of the log file, when I open this directory location shows with a padlock on the subject (see http://answers.microsoft.com/en-us/windows/forum/windows_7-files/what-are-the-padlock-icons-on-folders-for/e4b100a7-f65d-49c6-8555-6df40d35676a on this problem).

  Get rid of the error turned out to be pretty easy. All first quit all instances of Visual Studio, then in the directory identified in the box "VMware/About VMware Virtual Debugger" (when the error does not), the directory has been in my temp C:\Users\\AppData\Local\Temp, with the name of vmware - Directory and just delete this folder (actually not a bad idea to delete everything you can ", it is supposed to be temporary, after all).  Next time, I have not launched VS no error.

  I hope this helps!

• The log files can be removed automatically in the environment of the HA

  Hi experts BDB.

  I write db HA 4.6.21 the bdb version-based application. Two processes are running on two machines, a master who will be read/write db, one as a client/backup reads only the db. There is a thread in demon master who perform checkpoint all the 1 second: dbenv-> txn_checkpoint (dbenv, 1, 1, 0), and dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE) will be called after runnng checkpoint each time. The env has been opened with indicator: DB_CREATE | DB_INIT_TXN |  DB_INIT_LOCK | DB_INIT_LOG | DB_REGISTER | DB_RECOVER | DB_INIT_MPOOL | DB_THREAD | DB_INIT_REP;   Autoremove indicator has been defined: envp-> set_flags (uid_dbs.envp, DB_LOG_AUTOREMOVE, 1) before open env.

  I found this thread https://forums.Oracle.com/message/10945602#10945602 , who discussed non-ha environment and I tested my code in an env without DB_INIT_REP non-ha, it worked. However in HA env these log files were never deleted. Could help you in this matter? The customer needs to run checkpoint? Can it be a bug in the bdb?

  Thank you

  Min

  There is a thread in demon master who perform checkpoint all the 1 second: dbenv-> txn_checkpoint (dbenv, 1, 1, 0), and dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE) will be called after runnng checkpoint each time. The env has been opened with indicator: DB_CREATE | DB_INIT_TXN |  DB_INIT_LOCK | DB_INIT_LOG | DB_REGISTER | DB_RECOVER | DB_INIT_MPOOL | DB_THREAD | DB_INIT_REP;   Autoremove indicator has been defined: envp-> set_flags (uid_dbs.envp, DB_LOG_AUTOREMOVE, 1) before open env.

  I do not say that this is causing a problem, but make the DB_ENV-> log_archive (DB_ARCH_REMOVE) in your thread and setting DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) are redundant. In your thread, you control the timing. The DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) option checks and removes unnecessary log files when we create a new log file.

  Have you seen in the documentation of DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) we do not recommend do deleting files of automatic newspaper with replication? While this warning is not repeated in DB_ENV-> log_archive (DB_ARCH_REMOVE), it also applies to this option. You should review the use of this option, especially if it is possible that your customer could go down for a long time.

  But it is a warning and automatic log removal should work. My first thought here is to ask if your client has recently experienced a synchronization? Internally, we block archive on the client during certain parts of a synchronization master to improve the chances that we will keep all records required by the sync client. We block archiving for 30 seconds after the client synchronization.

  I found this thread https://forums.oracle.com/message/10945602#10945602 that discussed non-ha environment and I tested my code in an env without DB_INIT_REP non-ha, it worked. However in HA env these log files were never deleted.

  This thread is to discuss a different issue. The reason for our BDB 4.6 warning against the use of automatic elimination of log with replication is that it only takes into account all sites in your replication group, so that we can remove a log of the master who always needs a client.

  We added remove auto journal group that supports replication manager replication 5.3 BDB, and this discussion is about a change in the behavior of this addition. With this addition, we no longer need to recommend against the use of elimination automatic log with replication in BDB 5.3 and later versions.

  Could help you in this matter? The customer needs to run checkpoint? Can it be a bug in the bdb?

  I'm not sure that the customer needs to run its own control points, because it performs checkpoints when it receives control point of the master journal records.

  But none of these options to delete log on the master does nothing to remove the logs on the client. You will need to do the following: to archive logs separately to the customer and the master.

  Paula Bingham

  Oracle

• Switch log file

  Hello world
  
  We use the Database 9i and during the import, we have temporarily added 2 new newspaper groups (each 2 GB in size) to improve the performance of the import. At the end of import, we have a plan to drop these newly added newspaper groups. To do this we are to issue the command 'Alter system switch logfile'.,.
  but it runs more than 8 hrs, we have increased the value of Log_archive_max_processes also, but yet he is running.,.
  
  Could someone please suggest on how to improve the speed of operation of switch log file?
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  PL/SQL Release 9.2.0.8.0 - Production
  CORE Production 9.2.0.8.0
  AMT for HP - UX: 9.2.0.8.0 - Production Version
  NLSRTL Version 9.2.0.8.0 - Production
  
  
  Kind regards
  JAI

  >
  But always the switch logfile command is underway.,.
  >
  And it will continue to run until it has completed or you force the DB to the stop.

• DB restore Archives not lost mode redo log file... restore from controlfile tr

  I have a 11g database I had taken an archive backup but has failed to take redo backup of log files...
  so, while I restored the PB... after formatting the machine... the oracle instance does not start.
  
  
  I create controlfile track but when I run it I get errors.
  given that I don't have the old log files... How can I get around this issue
  Thank you
  Here is the example of trace control file... Note that I can't create the redo log file
  given that the db will not climb up, it must be in mode nonmount
  and here's my created controlfile...
  CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOG
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  MAXINSTANCES 8
  MAXLOGHISTORY 292
  LOGFILE
  GROUP 1
  ' C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_. JOURNAL"
  SIZE 50 M 512 BLOCKSIZE,
  GROUP 2
  ' C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_. JOURNAL"
  SIZE 50 M BLOCKSIZE 512
  -STANDBY LOGFILE
  DATA FILE
  ' C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSTEM. DBF',.
  ' C:\ORACLEXE\APP\ORACLE\ORADATA\XE\UNDOTBS1. DBF',.
  ' C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX. DBF',.
  ' C:\ORACLEXE\APP\ORACLE\ORADATA\XE\USERS. DBF'
  CHARACTER SET AL32UTF8
  ;
  
  I do not have these 2 files... what should I do to work around this situation
  ' C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_. JOURNAL"
  SIZE 50 M 512 BLOCKSIZE,
  GROUP 2
  ' C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_. JOURNAL"
  SIZE 50 M BLOCKSIZE 512
  -STANDBY LOGFILE
  DATA FILE
  
  Published by: zycoz100 on February 27, 2013 22:57

  If you have a backup to cold (closing correctly database) without the redo logs, change this:

  CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOG
  

  TO

  CREATE CONTROLFILE REUSE DATABASE "XE" RESETLOGS NOARCHIVELOG
  

  You need to change the NORESETLOGS RESETLOGS for Oracle to recreate online redo logs.

  Hemant K Collette