Issue update Compaq 6510 processor b

Similar Questions

• HP compaq 6510 b does not start after the BIOS update

  Hello

  When I turn on my laptop HP compaq 6510 b it DISPLAYS this message: your bios has not finished updating 6510b.after flashing the bios of the laptop does not start .it displays the same message (your bios did not complete the 6510 b update) and turns off. I cannot access the bios by pressing F10.the bios version was F16 and flash by F20 .will help thank you very much.

  I'll have to return a verdict of laptop motherboard bricked due to a failure of the BIOS upgrade. Sorry, but it happens.

  This means that this would require the replacement of the BIOS chip to make it work again.

• Compaq 6510 b with update of video Mobile Intel (r) 965 Express Chipset card.

  I have a Compaq 6510 b with Mobile Intel (r) 965 Express Chipset. I would like to know if it is possible to change the graphics card in Notepad. I would like to upgrade, but don't know if it can be upgraded or buy a new.

  The upgrade of the video solution in your laptop is a no-go.

  The video of your laptop is an integrated solution. This means that the video chip is soldered to the system board.

• HP Compaq 6510 b (RJ559AV): new clean install of Windows 10 on HP Compaq 6510 b

  Hi I have a HP Compaq 6510 b (RJ559AV) laptop computer with processor Intel Core 2 Duo, T7100 @1. 8 GHz,

  14-inch screen, 2.49 GB RAM and 74.5 GB hard drive with the NTFS file system,

  CD and DVD reading only reading / writing drive,.

  Mobile Intel 965 Express Chipset Family Display adapt but no driver WDDM for her.

  who is running Windows XP Professional Version 2002 Service Pack 3

  I want to know will be Windows 10 clean new facility starting via Windows 10 installation will work?

  10 Windows automatically installs WDDM drivers for the graphics card...

  Any other questions, you know...

  Kind regards

  Chikubhai

  At any time.

  Glad to be of assistance.

  The T7100 can run a 64-bit operating system.  See the instruction set specifications below.

  http://Ark.Intel.com/products/29759/Intel-Core2-Duo-processor-T7100-2m-cache-1_80-GHz-800-MHz-FSB

  You should get a decent return on a 64-bit operating system if you have at least 4 GB of memory installed.

  I have 8 GB in my 6910p because I had when he was only about $60 for 2 x 4 GB memory PC2-6400.

  Nowadays memory is about $100 for a 4 GB chip, so it is too costly to install.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Envy x 360 laptop: HP Notebook System Bios update system (Intel processors) could not be updated

  I get an error of update failed trying to imstall the next update:

  HP Notebook System Bios update system (Intel processors) Impossible to update

  Is there a way to properly update this? What is a critical update?

  Thank you

  Anthony

  Hi @WildFan,

  Thanks for getting back to me.

  Yes, I can give you links to the downloads.

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Hope that help.

• Compaq 6510 b: bootmgr is missing and I don't have a CD/USB

  Hello

  My HP Compaq 6510 b has been infected by the virus of defense crypto. I searched like crazy and could not find any solution and decided to sacrifice my photos and videos. But turned out even restore the laptop is not easily possible. AFAIK, the laptop is Vista but Windows 7, when I open it. So, after much research I found someone who said I should type collection in the area of research manager and allows to restore the laptop but unfortunately that does not exist in the laptop so I looked for something else and found out that by right-clicking on the computer that I can go to manage and then active partition and tried to restart. And then it happened, he showed "bootmgr is missing, press ctrl, alt and del to restart" so I did, but the same screen appears.

  I searched online again and said I need a cd of Vista or Windows 7, but I don't have that. They also said that it is the only way to fix the laptop. So now I'm out of options and hoping someone here can help me.

  Is there anyway I can fix this without the CD and restore my laptop to its original settings? Or can I restart my laptop without the bootmgr thing missing attachment?

  Really need help with this and your help will be greatly appreciated. Looking forward to the answers.

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are not sure, first try the 64 bit version.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• Fact compaq 6510 computer b laptop support windows 7

  Hi all,

  Please can tell me, a computer compaq laptop 6510 b does support windows 7.

  As I can't find 'DirectX 9 with WDDM 1.0 or higher driver graphics device.

  Concerning

  Rana

  rana_pavn wrote:

  Thanks for the reply.

  This means that a laptop Compaq 6510 b can support Microsoft windows 7 ultimate (32 bit).

  And I can all the driver linked to the related reference.

  What about 'graphics DirectX 9 with WDDM 1.0 or higher driver device', I can't find this info in my system.

  Hello

  This should be in the video driver (if the hardware also supports this). The link shows all the available drivers for your laptop.

  Kind regards.

• Restoring factory Compaq 6510 b

  Hello

  I am trying to factory restore my HP Compaq 6510 b with Vista. I don't have a recovery disc & laptop did not come with 1 either.

  F11 option does not however F8 doesn't allow me to access Advanced Boot Options, however there is no repair your computer or system recovery option in the menu.

  Also there is no recovery manager when searching in the start menu.

  System Restore option doesn't seem to be much help, as the available date only seems to be in the last days.

  I am wasting my time trying to factory restore or is it time to finally upgrade my laptop once loyal & reliable?  Any help/comments are greatly appreciated.

  Thank you

  Hello:

  If you live in the USA/Canada, call HP at this number 1-800-334-5144 and see if you can still get a set of recovery disks.

  You will need to have the serial number of your laptop handy to give to the customer service rep.

• I have some serious issues update to existing and new to download applications.

  Hello

  I just bought a laptop with w8
  I have some serious issues update to existing and new to download applications.
  When I click to download an app it still works but does not settle anything.
  at this point, I can't click the back (arrow) button to return to the main image of the store
  the windows button works and I can continue to use my computer
  the new application (or the update for an existing one) is not installed.
  Here are some useful points:
  -No installation other than Mc. provided McAfee antivirus preinstalled.
  -computer is not in a proxy connection
  -windows update does not work, when I click it works forever without doing anything
  -J' have tried to run the troubleshooter, but it fixes all the time the same 2 questions and that solves nothing
  -J' I reset the cache to store without change
  -without any logical explanation, some updates and downloads have managed at the beginning. then, when the problem started I have reset the cache and I could download a couple more. now everything is blocked and no solution found on this forum does not work.
  Please help me
  thanx
   
  Original title: problem with store windows

  Hello

  I suggest to run the following command and check to see if it helps.

  To fix Windows Update errors, use Deployment Image Servicing and Management.

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2 type the following commands. Press ENTER after each command.

  o DISM.exe / Online/Cleanup-image /Scanhealth

  o DISM.exe / Online/Cleanup-image /Restorehealth

  3. close the command prompt, and then run Windows Update again.

• Can I update to this processor DC7900 SFF?

  -Hello, I have a PC HP - Compaq DC7900 SFF with a processor Intel E7300 (Core 2 Duo), and I want to update this processor by an Intel Q9650 (Core 2 Quad) (only to change the processor)?

  -Thank you.

  Hi, Pepito,.
  
  Yes you can upgrade this processor is compatible.
  
  Click on "Bravo Star" icon on the left side so resolute.
  
  I am an employee of HP, but the comments in this forum is of myself and is not HP

• I need an update for my processor manufacturer has no one to support my stepping for intel 1000/256/133/1.75v

  I start my computer and it tells me that I need an update for my new processor because there an 1801 error such that it has a firmware problem and I need to support my progress. I went online to get and my manufacturer isn't an i have the update of download from the windows Web site and he told me that I don't need to update, because I have the most recent version but I restart my computer and he always tells me that I need an update to support my no to no. This happened since I installed a larger cpu to a 1000/256/133/1.75v of intel, and they have one and nor the hp compaq for my desktop computer series EP Please help my computer freezes and has severe lag and I can not open any page more than one at a time as when I do it takes forever to ADO and a screen comes up asking me to killthe page or wait, then he asks me if I want to stop, I think it was to do with my screen with visual because when I play a video on a screen to only it freezes again. I can't fix then please someone help thank you.

  Have you looked to see if your motherboard has a BIOS update available?

  I have personally had updated the BIOS on my motherboard during the upgrade from my old i7 920 quad-core CPU for an i7 960 hexa-core CPU.  The motherboard wouldn't even POST after upgrading the CPU without BIOS flash first, it might be interesting to try.  It might be better to install the old CPU and make sure that everything is working normally before flashing the BIOS.

  I strongly recommend to back up important documents to an external storage device before you attempt this, since there is always a risk when you perform upgrades to your hardware.  In addition, please take care to follow the instructions exactly as directed.  You wouldn't want an as the result of this expensive paper weight...: o

• 5 GHz WiFi card update - Compaq Presario

  I just got a new router today and found out that it is a double router broadband and supports the 2.4 GHz and 5 GHz. I was wondering if I could update my existing WiFi card that supports only the 2.4 GHz and get one that will take in charge the 5 GHz band. Also if I have a 5 GHz WiFi card in my laptop can still connect to networks that support 2.4 GHz only? How much would cost a new card? And finally, if I can improve my card, how I put in my laptop?

  Data sheet:

  Model: Compaq Presario CQ57-33WM

  OS: upgrade to Windows 8.1 Pro

  Memory: Updated 6 GB of RAM

  Hard drive: 320 GB 5400 RPM

  Processor: FSB of 1333 MHz 1.50 GHz Intel Celeron processor B800

  Network cards:

  Realtek RTL8188CE 802.11 b/g/n WiFi Adapter

  Realtek PCIe FE Family Controller

  (A lot of WAN Miniports is also listed in Device Manager)

  Can I still switch my wireless card based on these specifications? It would be difficult to change? Let me know if you need more information on the computer.

  Also, if it ends up that I can't change my card or it is really hard to change, could use something like this as a last resort? Double USB adapter wireless broadband

  Any help is appreciated!

  Thank you!

  filupskid wrote:

  I just got a new router today and found out that it is a double router broadband and supports the 2.4 GHz and 5 GHz. I was wondering if I could update my existing WiFi card that supports only the 2.4 GHz and get one that will take in charge the 5 GHz band. Also if I have a 5 GHz WiFi card in my laptop can still connect to networks that support 2.4 GHz only? How much would cost a new card? And finally, if I can improve my card, how I put in my laptop?

  Data sheet:

  Model: Compaq Presario CQ57-33WM

  OS: upgrade to Windows 8.1 Pro

  Memory: Updated 6 GB of RAM

  Hard drive: 320 GB 5400 RPM

  Processor: FSB of 1333 MHz 1.50 GHz Intel Celeron processor B800

  Network cards:

  Realtek RTL8188CE 802.11 b/g/n WiFi Adapter

  Realtek PCIe FE Family Controller

  (A lot of WAN Miniports is also listed in Device Manager)

  Can I still switch my wireless card based on these specifications? It would be difficult to change? Let me know if you need more information on the computer.

  Also, if it ends up that I can't change my card or it is really hard to change, could use something like this as a last resort? Double USB adapter wireless broadband

  Any help is appreciated!

  Thank you!

  Hello

  According to the service manual this lappy does not support 5 GHz wireless cards. Most recent computers based Intel Mobile (Ivy Bridge and higher) support the latest maps wireless Intel including the last 7260AC one. Your laptop is older, so I can't say with certainty what will work or not. In this case I suggest to get some usb adapters wireless such as that of your link or one of them:

  http://wireless-adapter-review.TopTenReviews.com/

• Compaq CQ5101IT: processor upgrade

  Hello

  I want to spend my CPU, so I ask if on my mother M2N68 Council-(Narra5) I can get an AMD Phenom II X 4 810 CPU?

  Sorry for my English not so good, thank you.

  Roberto.

  Here is the support page for this motherboard

  http://support.HP.com/us-en/product/Compaq-Presario-CQ5100-desktop-PC-series/3942817/model/3980844/document/c01701270/

  These are supported CPU

  Only processors AM2 + socket are supported with this motherboard.

• Laptop HP 15-ac176na: update BIOS (Intel processors)

  Hello

  I was download the updates from the HP support Assistant.  3 updated driver installed fine, but the update BIOS for Intel processors just to be on the road all day.  It seemed to download ok, the blue bar filled and he said that it was installing, but never finished because I had to stop going to bed.

  How long does take to install?  HP laptop laptop 15-ac176na.

  Thank you

  Paul

  Hi Paul,.

  There seems to be a listed version between your and the update offered - F.1E Rev.A (provides microcode update CPU)-the HP bios updates are almost always cumulative, but I saw a few times when it's bbe made in order, then it can be interesting to see if F.1E Rev.A Flash correctly - if this is the case, try to rerun F.1F Rev.A

  F.1E Rev.A is on the following link

  http://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74374.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Kind regards

  DP - K