Issues DHCP and FTP

Similar Questions

• Removal of the SBS 2011 server how to migrate DHCP and DNS services to the firewall

  I have a small client that has an old server that comes close to falling; its off primary runnign the disk space and must often be restarted.  they do not need the server and it was decided to remove the server and use a working group with NAS drive for their records.  They have a sonicwall firewall that can handle all DHCP services.  All computers have disjoint form field, all profiles will migrate the workstation's local user accounts.  all work, printing, file sharing and internet services.  When the server is stopped, after about 10 minutes the network goes down and I can't even log into the firewall.

  How I got out of shape services DHCP from the server to the firewall?  the firewall has active DHCP and the range of rental contract is configured correctly, but cann no PC connect when the server is off.

  Im trying to finish this tomorrow so if anyone can help me tonight it would be very appreciated...

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Time Capsule do not pick up address DHCP and cable modem...

  You just bought a Time Capsule and a couple of Airport Express. If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  That being said, I tried to create a mobile network instead of pure wi - fi and am studying various behaviors that are not as expected when I rear hub to the Internet Time Capsule, but need to isolate and go 1 bit at a time... (it works not as well as suggest Apple instructions on homelessness of installation)...

  If:

  1. configuration of the modem cable shows that DHCP is 'ON' and supplied address range 192.168.0.x by 192.168.0.y,.

  2 Cable modem wireless is disabled,

  3 Time Capsule Wan is connected to the cable modem, Ethernet

  4 Time Capsule is configured to request its address IP, DHCP

  5. Airport Express is in Bridge mode and have addresses such as 10.x.y.z (appears to be from a Time capsule).

  6. safe as Time Capsule is set to be as DHCP and NAT

  7. There is NO other device in this configuration connected by Ethernet except the cable Modem and the Time Capsule.

  So, why is the IP address of the time Capsule 76.181.45.xyz? (The address is NOT in the range of the DHCP as described in the #1; it is not supposed to be?) ....

  Whence this address?

  A friend says this address puts the "other side" Time Capsule of the cable Modem, directly on the Net?... (Shouldn't worry?) ....

  If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  It's because you didn't have the devices connected via Ethernet before you set up the. Given that the installation utility saw a wireless connection, it is assumed that this was the way that you want to connect devices on your network at all times... so he put it this way.

  If you had an established connection Ethernet before you ran the installer, then the utility would have detected this connection and set up the airport to "expand using Ethernet", does not extend to assistance of wireless.

  (it works not as well as suggest Apple instructions on homelessness of installation)...

  If all goes well, you don't talk about this document... Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo... .. Since the 'how' information in this article is at least 4 years late, bear little resemblance to the latest version of AirPort Utility and some of the information are simply not true.  This document if trash is what you... He'll probably do more harm than good with regard to the details of setting.  The article is OK for basic general information, however.

  6. safe as Time Capsule is set to be as DHCP and NAT

  It should not be if your modem is a modem/router "" or type 'bridge' of the device which is also DHCP and NAT services. The fact that you have disabled the wireless on the device confirms that it is both a modem AND a router. That being the case, then you have two devices that both struggling among themselves to try to control the same network... AND do you also have a network error called Double NAT... something you don't want.

  Probably the best at everything again and provide us with the number of brand and model of your "modem", that we can confirm what it is that you have, then the correctly configured time Capsule to work with this device. Once the time Capsule is set up correctly, it will be easy to put in place the other airports.

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them

• Satellite L30-115 - deleted TCP and FTP packets

  Hi all

  I have a Toshiba Satellite L30-115 and a DSL connection. I have a problem with my laptop running Win XP SP2 with AVG anti-virus.

  TCP and FTP packets are systematically deleted by Firewall setting or my system. I tried these tools that rewrite the registry entries for the TCP/IP protocol in Windows XP, but nothing seems to fix. Everything that affects the TCP fails systematically:
  [My browser tells me that the connection was reset during any process, AVG says automatic updates failure but 1] I always got ping www.yahoo.fr and strangest of all, Skype connects properly (likely because it uses another protocol and also because it is in the exception list from my firewall).
  Here is that I only have the native Win XP firewall and not others (license AVG, I've got is only to protect web, mail and virus).

  Another thing is that the problem persists even when I turn off the firewall or if I play around with the settings.

  Help, please.

  Didier

  Hello

  Check this short work around:
  Start the CMS (control console)
  Then type this command: * ipconfig / renew *.

• Svchost.exe with service Client DHCP [Dhcp] and DNS Client [DNScache] high memory use

  I'm using Windows 2003 standard Server SP 2 found problem svchost.exe run service Client DHCP [DHCP] and DNS Client [DNScache]
  use a lot around 2 GB of memory. Virus scan try and Hijackthis is not found. I try to restart memory return service.

  I have 4 servers and the same symptoms.

  Anyone know why it caused?

  Hello
   
  Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• WRTP54G - configuration DHCP and static IP

  I got a Blu - Ray player and it turns out that he won't talk to my WRTP54G DHCP and I've only got to operate when plugged directly into my cable modem. Is it possible to configure the router to have a DHCP network, but allow also my Blu - Ray to have a static IP address, so it can also connect to the internet?

  Yes, just make sure that you have configured the blu Ray player with a static IP address outside the range of the DHCP, set up in the router list.

• probably caused by the settings of the firewall on your computer. Check the settings for HTTP port (80), HTTPS port (443) and FTP.

  Change the title: internet connection.

  Unable to connect to the internet, suddenly, message that I can't connect to the internet using HTTP<>< or="" ftp.="" thios="" is="" probably="" caused="" by="" firewall="" settings="" on="" your="" computer.="" check="" settings="" for="" http="" port(80),="" https="" port(443)="" and="" ftp.="" funny="" i="" was="" just="" on="" the="" net="" not="" more="" than="" 10="" minutes="" prior="" to="" this.="" checked="" all="" conections-="" good.="" what's="" my="" next="">

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• DHCP and static IP at the same time?

  Simple scenario. My internet connection using DHCP and my home network uses a 10.x.x.x (static) addresses. How can I add an address static 10.0.0.x, in addition to the IP address provided by DHCP, if I can use internet and LAN at the same time? Under linux, it's pretty simple: ip addr add 10.0.0.1/24 dev eth0

  You cannot use two IP addresses on a single ethernet interface, if you are using DHCP, you cannot add a static IP, it is technically impossible, in this case you must use two NICs, i.e. two different interfaces. If you connect to the Internet via the DHCP protocol and you have another PC which allows you to build a local network then you you may not change the dynamic address, but can replace the LAN address is dynamic/static. For example, if the PC that has the Internet connection, add another NETWORK card, then connect the second PC with this new NIC card. Now turn on sharing on the first PC Internet connection interface and so the two PC will be able to run the home networking and Internet connectivity. You don't even need to add a static IP address.

• Removal of Telnet and FTP (keep the SSH/SCP)

  I don't want the sensors to run Telnet and FTP, services because I want to force anyone to connect to them to use SSH/SCP.

  I edited the /etc/initd.conf and put in comment lines that start these services. However, this may not be the 'best method' because after that I tried that all of a sudden the sensor stopped listening on port 22 and I couldn't connect with SSH (of course). When I Uncomment the lines telnet and ftp in the inetd.conf, SSH/SCP/port 22 is open again. Weird. What should I do to remove these services?

  BTW: on an unrelated note, the/dev/iprb0 (command and control) interface is the card that is assigned an IP address and is used for the connection of the sensor. / Dev/spwr0 is the interface which doesn't listen for traffic in promiscious mode and does not have an IP address assigned, right?

  Thank you

  Erik

  Run sysconfig-sensor, there should be an option in the secure communications box to disable telnet and ftp. Sysconfig-sensor will then take care to make the changes for you.

  4220 and 4230 sensor devices, your statements are correct for the interfaces.

  NOTE: 4210, 4235 and 4250 sensors have names of different interfaces.

  Marco

• Selection extended DHCP and several VLANs

  I have a switch that has 2 VLANS: vlan 2 and vlan 3 - and both computers are connected to the switch where each PC is a member of one of VLAN.

  PC2 = VLAN2

  PC3 = VLAN3

  The switch is connected to a router that acts as a DHCP server with several 3 DHCP scopes for each of VLAN, basically a simple configuration "router on a stick".  This question has been confusing me for some time: How does the router knows what dhcp scope to assign an IP address to a particular computer?

  Let's say PC2 is now trying to get an IP address from the DHCP server, I know initially that he will send a DHCP DISCOVER broadcast to the router message and I assume that the router will know the VLAN demand coming as well based on the information contained in the package. But how the router discerns what scope to assign IP address to PC2 especially if I need PC2 to have an IP address in the subnet 192.168.2.0 and NOT 192.168.3.0 or vice versa?  The controls of such a choice?

  IP dhcp pool vlan1

  DHCP excluded-address IP 192.168.2.1 192.168.2.10

  DHCP excluded-address IP 192.168.3.1 192.168.3.10

  !
  IP dhcp pool vlan2
  network 192.168.2.0 255.255.255.0
  test.com domain name
  Server DNS 192.168.2.1
  default router 192.168.2.1

  !

  IP dhcp pool vlan3
  network 192.168.3.0 255.255.255.0
  test.com domain name
  Server DNS 192.168.2.1
  default router 192.168.3.1

  THX sc.

  Hi Sherwin,

  It's will be very simple. I guess that on the router configuration stick will have something like below.

  FAS int 0/0.2

  encapsulation dot1q 2

  IP 192.168.2.1 255.255.255.0

  FAS int 0/0.3

  encapsulation dot1q 3

  address 192.168.3.1 IP 255.255.255.0

  Now when a PC that is connected to the VLAN 2 send a DHCP broadcast this program is received by the interface that belongs to the same broadcast domain (VLAN 2). This broadcast is received by the Fas 0/0.2 and this has encapsulation dot1q sub interface 2 and so it will be part of the same broadcast domain (VLAN 2). If the router will search if there is no DHCP scope configured for the ip range on the interface sub Fas 0/0, 2. Now, router knows the 192.168.2.0 extended DHCP and assign the IP range of this scope to any PC in the VLAN2.

  I hope this helps.

  Concerning

  Najaf

  Please rate when there is place or useful!

• Separate Wired DHCP and static profiles

  Windows 7 Pro 64-bit

  We have two offices within our campus. Creating a server (DHCP, static) using DHCP. Although building B (DHCP, static) also uses the DHCP protocol, it is necessary for me to assign a static IP address to my PC for various reasons.

  I need to connect my PC to each building. Using another address is not viable because building B (DHCP, static) has DHCP so the PC is assigned to the DHCP rather than another static address.

  Can I create and select separate network for DHCP and LANs static profiles?

  Thanks in advance.

  You can watch NetSwitcher or NetSetMan...

  http://netswitcher.com/

  http://www.NetSetMan.com/

  .. .to create network specific profiles...

• How can I get my list of sites and FTP access, password etc... (old win 7 on an external drive)

  Hello, this is not considered a regular registered sites export (I have many)... and it's a mistake.

  In short, after computer out, I got the hard drive I have USB (old win 7 pro on an external drive)

  How can I get my list of sites and FTP access, password etc...

  they are encrypted in the registry if I'm not mistaken?

  any idea?

  Thank you.

  (Google translation)

  proceedings found:

  Just do an export of the new common/site .reg file and the modifier with the values of the old and then importing, everything works

  Thank you

• File and FTP diff b/w adapter?

  What is the difference between file and FTP adapter?

  (1) the file adapter is used, when the process is to read/write/list files on your local system (where your FMW server is installed and running).

  (2) However, the FTP adapter is used, when the process is reading/writing/list of the files in a system essentially other than the local system (where your FMW server is installed and running) which is set up as an FTP server to access files. The system can be with your network or outside of your network.

  --
  Mark the detachment as "useful" or "right answer", if your problem is resolved.

• number of issues: free and paid articles?

  Is it possible to do folio issue multi and publish questions free and paid it? Thanks for the info!

  Yes, you can have free and retail issues in your Multi number App. For details, you need to have in-app purchases set up in iTunes connect as well.