It must for application Apex runs in mode listener Apex to use Apex listener 2.0 as a print server?

Similar Questions

• What value for p_print_server when you use the Rest Data Services as a print server?

  Hello

  I have my report server on the internal workspace defined as BI Publisher URL as default... It works for my BI Publisher reports.

  I have 2 reports who need to use the rest Data Services FOP engine and use GET_PRINT_DOCUMENT function Signature 4

  https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_util.htm#AEAPI146

  For these 2 reports, I need to pass a parameter to p_print_server. The documentation describes this as the URL for the print server

  My question is, how to find the URL for p_print_server when I want to use the rest Data Services FOP on ADR?

  I can not put as NULL as at the time, it will use the default BI Publisher URL and then these 2 reports will not work

  Moreover, when I put the server reports on internal workspace as 'Rest Data Services', my two reports work fine, but not when I put is as URL BI Publisher - which is necessary

  Help, please

  Concerning

  Matt

  Hi Matt Mulvaney,

  Matt Mulvaney says:

  I already have the correct configuration to be able to produce reports FOP including two steps you mentioned. This set works very well when I put the "Print server" preference in the settings of APEX Data Services Instance remains - and reports can be produced. But as I said, this must be set to a URL of BI Publisher.

  If you use "Print server" as "Oracle BI Publisher" then the p_print_server parameter would have been:

  http://myserver.mydomain.com:8888/xmlpserver/convert

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (you can also use the IP address)
  • Print Server Port: 8888 (depending on what your BI Publisher Server uses port)
  • Print server script: / xmlpserver/convert

  Similarly, if you choose "Print server" as 'Oracle REST Data Services', the instance settings don't ask questions on the print settings, but internally it uses the following parameters and the p_print_server parameter is:

  http://myserver.mydomain.com:8080 / ADR / _ / fop2pdf

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (host computer on which ADR is hosted)
  • Print Server Port: 8080 (the port used by what ADR/APEX Forum)
  • Script of the print server: / ords / _ / fop2pdf (this is not disclosed by APEX/ADR documentation, but as mentioned by Marc Sewtz in the following thread)

  Reference: Re: Apache FOP disappeared by Oracle APEX installable APEX 5.0 and 5.0.1 APEX

  Kind regards

  Kiran

• Huge success in Oracle HTTP Server for Application Apex

  Hello

  
  

  I've been running several applications in the same database in Apex 4.2.2. I use Oracle HTTP Server 10.2 for web access to customers. I have 4000 users in systems, but at the same time can be logged 500. Server Web is in DMZ, and database server's internal network. We notice that we conduct page huge hit in the system, very high. I noticed a client IP had 44 000 visits in one day and on a daily basis any number of access is 500 000 to 600 000. That is for me, it's huge. This huge success makes the firewall close the connection to the web server. This disturbance is causing the company a lot.

  
  

  I would like to know how Oracle Apex communicates with the web server and clients, is the mechanism of Oracle Apex which causes this huge success or is it for external cause, such as a DoS attack or something like that. I'm really exhausted with it. Don't know what to do. Help, please

  
  

  
  

  Hasan Al Mamun

  Hi I have kind of a resolved / by past the problem. Now, I have no connection to the bottom of the problem. The problem was. Subdomain (say myapp.testlab.com) of my app had a single IP address, router treated the huge success of the same IP address as a threat and that's why router blocked the real IP of this subdomain. We did it, we asked our dns provider to add a few more (5) IPs for the same subdomain. Now, as dns selects a single IP among 5 fps in alternating single IP does not get as much success as to be blocked by the router. It works better now. Cordially Hasan Al Mamun

• Generate sample for Application Apex data

  Hello
  
  I develop applications demo in the Apex, for example an application order with customers, addresses, etc. order information.
  
  As a demo I would like to install this on the customer site.
  
  What is the best way to generate test data in the system?
  
  Sqlldr? Creating insert scripts? External tables?
  
  Thanks in advance for your help.
  
  Kind regards
  Toon Schilder

  Toon,

  The best option is built in function called as support objects:
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/deploy.htm#CHDGJHDA

  Read that and install applications canned a couple from here for some ideas on how to use them:
  http://www.Oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

  You can reward this answer by marking as being useful or correct ;-)

• Visual Basic for Applications

  We have an Excel spreadsheet that has a few buttons built with Microsoft Visual Basic for Applications.  If I install office, Pro 2013, in an appstack, I have a problem "can't find file:vba6.dll.  If I use the same install and install directly to the VM without capture capture an appstack then all the buttons in this spreadsheet work without problem.  By a procmon while pressing the button, I see that Excel is referencing "C:\Program Files (x 86)" \Common Files\microsoft shared\VBA\VBA7.1\VBE7. "." DLL' to VBA in the registry and the file system, which it is supposed to do and the transformation button.  When I do a ProcMon on the appstack reference is made to the snapvolume, which appears as a success however it strikes a "HKLM\." ... Metadata\FS\SVROOT\Program files (x 86) \Common Files\microsoft shared\VBA\VBA7.1\VBE7. "DLL\ #DETELTED # ' and 'HKLM\. '... Metadata\FS\SVROOT\Program files (x 86) \Common Files\microsoft shared\VBA\VBA7.1\VBE7. DLL\SvDeleted"and shows a result of"name not found ".  I guess that's the reason why it fails?

  Anyone else having success or failure with Visual Basic for Applications?

  I got this solved by using the following procedure; hope this works for you:

  The VBA7 DLL was not registered properly, so I had to Open regedit and manually enter the correct path in both

  • HKEY_CLASSES_ROOT TypeLib {000204EF-0000-0000-C000-000000000046}.
    • 6.0\9\win32
    • 4.2\9\win32

  Replace the value of data 'C:\Windows\SysWOW64\msvbvm60.dll' (mentioned in the question) to Visual Basic for Applications for the DLL VBA7 filepath. Which on my system is:

  • C:\Program Files\Common Files\Microsoft Shared\VBA\VBA7.1\VBE7.dll

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• How to add data to the table using Manager POST for restful Apex application

  Hi all

  I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

  Source for the POST Manager:

  Start

  insert into ALL_BOOKS values(:id,:book);

  end;

  Also created 2 parameters id and the book.

  Hi jerry2134,

  jerry2134 wrote:

  I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

  Source for the POST Manager:

  Start

  insert into ALL_BOOKS values(:id,:book);

  end;

  Also created 2 parameters id and the book.

  Check out the following tutorials OBE, that explains the creation of GET and POST RESTful Web Services and how to use them in the APEX.

  • Creation and use of RESTful Web application services Express 4.2
  • Creation and use of RESTful Web application services Express 5.0

  Also what yo mean "looking forward on how to proceed? Do you want to or created for use/consume in your Oracle APEX application hosted RESTful web services?

  If Yes, in your Application, you must create a RESTful Web Service reference -> shared components. Then, create a form/report based on Web Service reference.

  Kind regards

  Kiran

• Error: "files which are required for Windows to run properly must be copied into the DLL cache.

  I need some serious help please someone... I get a message that Windows File Protection is! and he says that "files which are required for Windows to run properly must be copied into the DLL cache" that I know, but I do not know why this has happened... I think it happened because of an update which took place about 2 days ago cause that is when it started, but I've tried all t0 get rid of it. I tried to disable using "regedit" in the run screen and it did not help... I need help with fixing this. I don't have my copy of Windows XP Professional Moose because this Pc is old, and I just kept to upgrade. Can someone guide me please in the right direction and the easiest that I'd appreciate it, thanks Chris!

  Thanks to all who tried to help, it means a lot!  I have no idea what happens but I tried to run a complete scan with antivirus program McAfee I was BTW it was free because of the internet service gave to me to be a customer with them, (I guess they have an ongoing case) not much of a cause I had nothing else problems with McAfee all for about 5 years and they are so much better programs out there (to new my opinion) but on with my story so whenever I tried to run a full scan or fast he rode every time error cannot start scan try again and so on, so I called them and they could not understand what the problem was and finally reinstalled but it doesn't work and of course they wanted me to buy a version... So I said forget it and went with one of the best Antivirus out there (my opinion only) programs free and it scanned and found some articles ad and he never came back! So I'm lucky so far and happy! Once again thanks to Jose @ and @ John for help and getting back to me, that shows the high level of awareness and dedication... So thank you to you two! I have no idea of what the problem was I think that he had with the Ad-ware and anti virus program does not properly and somehow obtained a "bug" If you want to. Have an awesome day and thank you and if I can ever be useful I'll do my best! I was wondering something quick you guys like Avast Internet security because I've had some people said he is well worth and had some interesting features, I personally put AVG but I was wondering about obtaining notice! Thanks for the tips when you get the time!

• The new Groove application will run on windows 7, or is it for windows 10 only?

  Originla title: Megalo

  The new Groove application will run on windows 7, or is it for windows 10 only?

  No, it's for Windows 8 and Windows 10.

  https://www.Microsoft.com/en-au/store/apps/Groove-music/9wzdncrfj3pt

  To use this application, upgrade to Windows 10.
  This application works on Windows 8 and Windows 10
  Download this app to Store on your PC.
  Get the app Store on your phone.
  You can also get it on your Windows Phone.

  Works on: PC, mobile device

• How to check what Qt application is run for the first time?

  How to check what Qt application is run for the first time? I need for the creation of trial version of my application. Any help is greatly appreciated

  Probably use file data and put an I_ran_at_least_one_time file and verify its existence. This file is not accessible to the user and is not changed even if you upgrade the application.

• 10 blackBerry smartphones must have application for all BlackBerry...

  Please add list: 10 must have application for all BlackBerry phones + link to application...

  And can someone give list for BlackBerry 8100? I am new user of BB...

  Recommended freeware.

  ------------

  Nettwerk

  Stinsonddog Web site

  http://www.Stinsonddog.com/must-have-applications

• l get one "this application cannot run on your pc" when I try to download flash player for my new Surface running windows RT

  I get an error "this application can run on your pc" message when I try to download flash player for my new Surface running Windows RT.

  If you have downloaded Flash player from the Adobe Web site, you will have the version that is compatible with the x 86 / x 64(Win 7, Win8 Pro etc) which does not work on your Windows RT Surface. This is because Windows RT running on ARM processors, and programs written for x 86 / x 64 cannot run on RT.

• "Apps are not work - this application cannot open, the screen resolution is too low for this app run to change your screen resolution.

  Origignal title: Apps does not work.

  I got Windows 7 Starter I have upgraded to Windows 8 Pro on my mini HP laptop, but when I select no matter what application I get the following message

  "This application cannot open.

  The screen resolution is too low for this app run

  Change your screen resolution.

  and when I press 'Edit your screen resolution' I found the screen resolution is the maximum 1024 x 600.

  Under him, I found the following warning "" your resolution is less than 1024 x 768 elements could not fit and applications could not open

  Please advise?

  I know this is an old thread, but I came across it looking for a solution to the same problem. It turns out that my problem has a cause simple and simple solution. I had accidentally pressed the "multiple displays" function key on my keyboard (F4 on my HP Envy) and therefore affect my screen out of two monitors without realizing it. I started getting the error "the screen resolution is too low for this application to run", came here, tried to change my resolution screen and then realized what I had done. Once I changed the key function to the PC only, the problem has been resolved.

• Ive bought a subscription for one year for applications, after that download some apps ive noticed that they are in the 30 days test modes. How can I get my creative cloud acknowledged he paid?

  Ive bought a subscription for one year for applications, after that download some apps ive noticed that they are in the 30 days test modes. How can I get my creative cloud acknowledged he paid?

  Try to connect and then reconnect again.

• Oracle document for backups of applications Apex?

  Y at - it an official document from Oracle that tells us how to export applications apex command line instead of using the GUI in apex?
  
  When I google, I've seen a few links of apex users who had written that export using utilities to ApexExport, but since we are in the windows environment, we are
  hard time getting the class_path, java_home... etc to install correctly. I guess that its not just me most of them would have met there.
  
  
  But I'm looking for an official document to Oracle? (export of the Apex of the command line applications in the Windows environment).

  Hello

  Take a look at the blog following view that contains a Windows BAT files.

  http://www.talkapex.com/2012/04/command-line-backups-for-Apex.html

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf