Jam clip will not play my aac/m4a files.

Similar Questions

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• Clip will not play when AC load via USB

  Hello

  I took delivery of my Clip to use permanently connected to an electrical outlet using the USB cable that is supplied with an adapter that plugs into the socket.  It is just a 3-prong plug with a USB plug on this subject.

  When you plug the clamp, it just cool and will not play.  I tried to search for other experiences, but no one is using this power supply solution.  Can anyone help?

  Thank you

  Steve

  Hmm.  There must be something weird on your USB AC adapter.  As long as only the two outside pins USB connected (these are the power pins) the player should load but still works normally.  The player charge if inside two pins are connected (the data pins).  Normally the inner pins are connected only when it is plugged into a USB port that is real.  Your card must provide a voltage on the data pins as well.

  You can sometimes get around by pluggin only the USB port for computer/AC adapter at halfway as the power pins connect before the data pins.  Or you can use the tape or paper to block the internal pins.

• Windows vista Media Player will not play mp3 or wma files

  my windows vista Ultimate 64 player will not play any of my wma or mp3 files. said that I did not have the codex of right. but wma and wmv are windows. What's new?

  Hi rpwerner,

  Please use the forum for Support of Vista,

  This is a codec package from Microsoft you want to download to see if it will be useful.  Also, try to update your Windows Media Player and Windows Update to get the latest version of the codec required to play the type of media.

  You can also use your favorite search engine to look for codec packs available on the web to help you read the content.

  NOTE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player will not play a. MOV file

  I have a new Dell laptop with Windows 7 Professional and Windows Media Player will not play a '. MOV' video file completely (the video but not sound). I am told by Microsoft Windows Media Player will not play a MOV file, and I need Codec VLC add on or another player who will play MOV file. What is the best solution and if its for download a Codec VLC, then what is the best source?

  Guess why?  [ :-) ]

  Types of files supported by Windows Media Player:
  https://support.Microsoft.com/kb/316992

  Which was probably that there was a lack of understanding between the container file and the codec here (in November 2013).  He says he's a "MOV" does not mean that he plays with the same codecs as all other MOV files.  ;-)

  It is perhaps a better place to read up on this:
  http://www.Dr-lex.be/info-stuff/mediaformats.html

• Media Player will not play mp4 or mpeg1 files. When I try the system crashes and it goes to the blue screen of death

  I'm running a quad core with 8 GB of windows 7 with office 2013 RAM.  All are clean installs.  When I try to play a video file on Media player my system breaks down and made a memory dump.  This also happens when I try and put a video in PowerPoint.  I am able to play these videos on QuickTime on the same machine.  The videos play fine on another machine of Windows 7 office 2013.  We use this system for presentations churches.

  Can anyone help?

  Hello

  1. Do you have an error message when you play this video?
  2. What Media Player do you use?
  3. Did you recent hardware or changes to the software to the computer before the show?

  I suggest using Windows Media Player, then try the following steps. This problem may occur because of codecs. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  You can refer to the suggestion made by Rohit Chettri in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Player-will-not-play-MPG-files/16145802-7e2b-4BD0-a81f-c58c54588d26

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Newbie: Pre 10 Clips will not play not (preview) in the monitor

  I am, I suppose, a beginner, because I haven't used at all first since v.6 and don't know for the most part with iMovie, Win Movie Maker and Corel Video Pro.

  I use PrE10 on computer of Windows 7 with 3 GB RAM and three recently defragmented or formatting of drives with at least 200 GB of free space.

  I use clips in Organizer as MOV files, and settings of the project have been properly adjusted to Standard DV.  The clips will play fine in the Organizer.

  In the first instance, by clicking on the button Play don't 'play' not the clip does not work (rotating circle) and don't go back to the Pause button that can be clicked to go back (in other words, nothing seems to be frozen).

  Dobuble-click on the thumbnail of media will launch the preview window, room can be clicked, but nothing happens.

  I'm SURE I'm missing a step.  Can someone tell me what this can be?

  1st, what version of Quicktime you have installed?

  QuickTime errors http://forums.adobe.com/message/4545437

  QuickTime X does NOT work http://forums.adobe.com/thread/888722

  ExporterQuickTimeHost http://forums.adobe.com/thread/1109614

  2nd, read Bill Hunt on one type of file as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

• Windows medial 11 in Win XP will not play the .dvr-ms files

  I can't get the .dvr-ms files to play in Win Media 11, Win XP.
  Thank you

  Thank you for your response.   I had not tried to play before .dvr-ms files on the computer with Win XP.
  Before I got your answer, I uninstall Media player 11 - he returned to Media Player 9.  It would not read these files.
  I then reinstalled Media Player 11 and it worked.  Don't know what I did, but maybe just reinstall it solved the problem.
  It works now.
  Thank you
  Jim

• Clip will not play certain albums

  I scanned through many forums and not found an answer. I have a + 4 GB clip. I drag and drop albums from the Explorer into the clip. They were torn to WMA (WMA or WMA Pro VBR or Lossless), throughput of 128 Kbps. I use Windows 7.  They are not protected against copying. the usage rights are not protected. I've updated the firmware to the last, I reformatted the clip. Format USB is set to Auto Detect. I reloaded the music. Two examples of regina spektor - fairly recent albums. "Begin to Hope" plays, 'Far' does not work. The clip going on just across the tracks quickly in an endless loop.

  Audio books from audible all copy and play very well

  I don't know there is a simple explanation moderately - I can't find it. Can anyone help?

  neilmck wrote:

  I scanned through many forums and not found an answer. I have a + 4 GB clip. I drag and drop albums from the Explorer into the clip. They have been ripped to WMA (WMA or WMA Pro VBR or Lossless), throughput of 128 Kbps. I use Windows 7.  They are not protected against copying. the usage rights are not protected. I've updated the firmware to the last, I reformatted the clip. Format USB is set to Auto Detect. I reloaded the music. Two examples of regina spektor - fairly recent albums. "Begin to Hope" plays, 'Far' does not work. The clip going on just across the tracks quickly in an endless loop.

  Audio books from audible all copy and play very well

  I don't know there is a simple explanation moderately - I can't find it. Can anyone help?

  WMA Pro is not a supported format.

• clip + will not play through the car usb connection

  I just bought a clip + to play in a car I just got.  The car has a USB connector that allows radio control to the player.  I loaded songs, all mp.3 off, on the 8 GB drive and tried to play through the car.  He plays for a few seconds then stops and freezes apparently.  The title of the song appears on the radio, but after a few seconds it seems to be stuck and nothing happens and the controls to change the songs don't work, as totally frozen. .  The Player keeps alternatiing between saying 'read' and 'write '.  This is my first mp3 player so I have no idea.  If the 8 GB is too big?  The player is 80% of the full

  What USB mode on the Clip (under settings) is set to?  You can try to change the setting to the other USB mode.

• Windows Media Player 12 will not play mp4, mp3, wmv files through IIS hosted local site when the PC is disconnected from the Internet

  I have an IIS Web site 6.1 on local 32-bit Windows 7 machine that serves HTML and MP4 videos via Internet Explorer on the local computer.  An internet connection is not necessary because it is all local storage and local accommodations through IIS.  IIS is configured to serve the MP4 videos in the form of downloadable files, don't not streaming somehow.  I have the right MIME type ".mp4" with the installation of "video/mp4" in the IIS server, so I don't think that's the problem.

  When the machine is connected to the internet, by clicking on a video link MP4 in any HTML page served by the local IIS server results in Windows Media Player opening and playing the video in its own window.  However, when the Ethernet cable is unplugged, by clicking on the same results of video link MP4 in Windows Media Player by opening its own window, and then display this error message:

  Windows Media Player cannot play the file.  If the file is on the Internet, connect to the Internet.  If the file is on a removable storage card, insert the storage card.

  It's almost as if Windows Media Player has a bug and since it accesses this media file via a URL, but the machine is not connected to a network, he thinks that this file is unplayable.

  When the Ethernet cable is disconnected, the local IIS server is still all the HTML code and ActiveX content except for media files.  I also tried to access MP3 and WMV files via the IIS server to see if Windows Media Player will open those when the computer is disconnected from the Internet.  These caused also Windows Media Player files display the same error message.

  I tried the VLC (VideoLAN) Player after changing the property file in VLC of WMP for .mp4 files extension.  With VLC installed and the extension changed to VLS property, I can download/open the MP4 video using the link in the web page served by IIS all when they are disconnected from the internet.  The only thing I can't do is get VLC player to open and play the video simply by clicking on the link in Internet Explore web pages served by the local IIS server.

  I would like to make use of Internet Explorer and Windows Media Player with this IIS server that serves the MP4 videos rather than using VLC player.

  Thank you

  Michael Rayman

  I finally found the answer to my problem:

  When they are disconnected from the internet, mysteriously, Windows Media Player 12 requires that you check a checkbox in tools > Options... > zone settings tab player called "Internet connection (ignore the other commands).  Once this box is checked and the settings saved on APPLY, then Windows Media Player 12 will play videos served by the local IIS server on the same machine, while disconnected from the Internet.

• Windows Media Player will not play error of MTS files that your computer works at low memory. Quit other programs, and then try again

  I am running Windows 7, 64 bit, home premium on a Dell Studio 1558 with an ATI Mobility Radeon HD4500-5100 graphics card and an Intel Core i3. It has 4 GB of RAM.

  When I try to read files MTS using Windows Media Player I get the error message "your computer is low on memory. Quit other programs, and then try again,"even with no other programs running. Windows Media Player will play other types of video files without difficulty.

  Any suggestions as to what can be the cause of the problem and how to fix?

  TBH I'm not sure.

  All I can say is on my desk, I have not loaded a pack of codecs only support of any kind and WMP12 plays my MTS files very well. Supported by this statement in Windows Media Player 12 is also capable of playing AVCHD formats (. ) M2ts et . MTS ). ^{[13]" from -} http://en.Wikipedia.org/wiki/Windows_Media_Player and the fact that in WMP12 - "Media files (all types)" MTS has listed as an acceptable format.

  My office has an AMD/ATI HD5670, and like I said seems to play.

  1. Have you tried to run a full anti-recent virus scan? If this isn't the case, update your antivirus program and run a scan full to see if it finds problems.
  2. Then try a sfc/scannow scan to see if it detects and fixes something.
  3. Just checked, you have installed WMP12? (it should be, but just a double check).

  This type of problem (or similar) has developed before items such as http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-and-low-memory-issues/bb4bf226-8bd0-41A5-9eed-9be08e6d3bdb and  http://www.TomsHardware.co.UK/answers/ID-1699934/computer-running-low-memory-Windows-Media-Player.html and some people said re-register the DLL of WMP files helped. Personally, I've never needed to test or try this kind cannot confirm.

• Premiere Pro CC 2014 will not play anything.

  Today, I launched a brand new installation of first Pro CC 2014 upwards (this is a trial) on a new iMac (3.5 GHz intel Core i7, 32 GB of RAM, NVIDIA GeForce GTX 780 M 4096 MB) and my project that was working fine yesterday on my MacBook Air will not play anything. The images are all H.264 digital SLRs. My sequences won't play, won't play my videos, my merged clips will not play, my multi cam sequences will not play. You press play and the play button becomes a stop button, but nothing happens. I tried to log in as root, but it will not play there either. All images are sitting on an external Lacie 4TB thunderbolt drive.

  Any thoughts?

  I thought it might as well be the permissions... ends by it was something really simple, but that didn't make any sense.

  Audio hardware preferences has created the system to input/output by default. Transition to the integrated output fixed.

  No idea why the audio hardware settings would keep the photo playback, but there you have it. Thanks to the support of technology Adobe useful phone.

• Sometimes the clips in Windows Movie Maker will not play during preview and not at all after publication...

  Hello!  I just create a movie using Windows Movie Maker (HP Pavilion dv6000/Windows Vista Home Premium).  During the PREVIEW, the first part of the video of my film sometimes will not play (view) while the audio continues. Sometimes he will play (view).  All clips are saved in the right place, the file formats are correct, and everything else that I think is done correctly.  In addition, after the publication of the video, he did the same thing; some parts of the beginning is not playing (see) only the audio.  I believe that this can have started happening after a few times when an error message pops up saying something like "Video player has stopped responding, but has revived with success...» "or something like that.

  Now, I tried a few things to try to fix the problem.  I noticed that if I take the transitions and effects on the clips then they play but every time. I don't know why this happens only at the beginning of the movie and not all of the film since I also have clips with transitions and effects in the end.  Help!  This is my first time using this program/do a movie (and it's really good if I must say for me... he can win an Oscar! * smile *), but I wonder if I did something by mistake at the origin of this problem...

  Signature

  "Confused."

  KW03, I wish allows you to check if the same thing happens with the Movie Maker live, and this will give us an idea of the question of whether it is related to the effects of media player or your codecs. Also test it in another account that the component for WMM store is different on each profile. I've included the steps:
  http://download.live.com/MovieMaker
  (Note that you can select exactly what you want to install once you load the installation process)

  • 1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

    Create a new user profile:

    Follow these steps to create a new account, we can test:

    (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

    If the work of nine and you discover you have a profile corrupted, take the measures listed in the following article to copy your data to the new: difficulty a user profile is corrupted

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Widows Media Player will not play videos.

  Windows Media Player will not play videos at home. I get a message that windows has closed the program. Media Center and Adobe will not play videos as well. The videos are. MOV. Can someone help with this problem? Thank you.

  Windows Media Player will not play videos at home. I get a message that windows has closed the program. Media Center and Adobe will not play videos as well. The videos are. MOV. Can someone help with this problem? Thank you.

  ==============================
  Some possibilities follow... good luck...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  The components of the 3ivx decoder read
  most MP4, M4A, 3GP, MOV and AVI files
  with Audio MPEG-4 video and MPEG-4 AAC

  3ivx decoder
  http://www.3ivx.com/download/
  (this should make Windows Media Player compatible
  with the .mov files... I think that there is a 30 days trial version)

  Also... the following freeware players can play QuickTime .mov files.

  Apple QuickTime
  http://www.Apple.com/QuickTime/Download/

  QuickTime Alternative
  http://www.codecpackguide.com/quicktimealt.htm

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MPC-HC.sourceforge.NET/

  If you want to install a pack of codecs... one of the following
  may be worth a try:

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  CCCP (combined Community Codec Pack)
  http://CCCP-project.NET/

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.