Jan

Similar Questions

• Are Jan 2012 updates make my strange computer Act?

  Hello. When I allowed installs the update the next day, my computer was in sleep mode and my monitor was on standby as well. When you try to switch on the monitor it's sounds trying to turn but then it stops immediately and repeat the cycle. I could still see the screen briefly as it sparkles so I don't know if it's a hardware problem... the monitor was fighting to stay on after a few minutes he finally came but had many lines sporadically on the front screen it clears up finally. This had never happened before, and it did not start until after the updates. I don't know if this is a problem with updates of the window or the monitor, or a computer. I am running windows xp. This happens whenever I'm away from the computer for a long period of time, but after that it lightens it seems very well the rest of the time I use it. Don't you know what I can do to solve this problem? I already tried Fixit and while he pulled upward for errors I will always have this problem. Also just now it prompted me to do an another automatic update... is there another one posted for the 12 Jan? Any help will be appreciated...

  Hello

  -What is the error message you get?
  -Are what tool "fixit" you referring?

  The problem may be caused by a conflict of third party software. I would like you to put your computer in a clean boot state, and then install the updates.

  http://support.Microsoft.com/kb/310353

  Note: Follow the steps in the article to restart your computer as usual.

  In addition, reset Windows updated components by running the fixit tool and check if this helps solve the problem.
  Follow the link for what has a fixit: http://support.microsoft.com/kb/971058

• last update was on Jan. 10, when I check for updates it says no to this day are available

  Original title : last date was jan 10 th, when I check for up date it saids not far are avabile, why?

  my last day was Jan 10, when I try to update its saids don't place avabile DATS why?

  Hello dustymydog,

  Microsoft update usually on a monthly basis. If you tried to update and it says that no update is available then there re no insertion updates due for delivery.

  Updates are delivered on update Tuesday of each month.

  Either by the way, my last update of Windows for Vista was on 17 January. It's KB2585542. The only other updates I have received have beenfor Microsoft Security Essential.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Error of NIC in Windows 7 after update 14 jan

  14 Jan my system up to date and the card network has stopped working.

  as a quick fix and I had some urgent work to do I did a restore of the system at the time of update pre and connected to the network immediately. Thus, the network adapter DOES not work. But today I have more option restore in the 14 th and I now cannot get any network connection. Please help I'll have to use the iPad to my wife

  For anyone experiencing the same problem.

  After much digging internet I ran AVG diagnostic tool and despite not being is not able to do a full scan due to the lack of internet connectivity, it has done reports them a problem with the "Jumpstart Wireless filter. I found a solution here http://www.sevenforums.com/network-sharing/237220-cannot-connect-wireless-although-all-other-computers-can.html

  After unchecking the box it's all systems go. I found that the software was connected to a netgear device, that I no longer use. Uninstalled the Netgear WNA1100 software and the jumpstart box disappeared too.

  so in short; Center network and sharing Center > change adapter settings > click right adapter >, select properties and uncheck jumpstart filter wireless.

  I must do this for a living

• Express 2 dates given in neighborhoods such as jan - mar, April-June

  Hi all

  How can I Express 2 given dates (for example: October 1, 15) in terms of neighborhood like (jan - mar, April-June-July-September, October-December)

  Instead of quarter represent as numbers (1,2,3 etc) I want to represent as jan - mar, April-June, July-September and October-December

  Try this

  SQL> with date_data(dt) as (select to_date('01-Jan-2015') from dual union all
    2                                 select to_date('10-Apr-2015') from dual union all
    3                                 select to_date('20-Sep-2015') from dual union all
    4                                 select to_date('31-Dec-2015') from dual)
    5  select dt,case when to_char(dt,'Q')=1
    6                          then 'Jan-Mar'
    7                          when to_char(dt,'Q')=2
    8                          then 'Apr-Jun'
    9                          when to_char(dt,'Q')=3
   10                          then 'Jul-Sep'
   11                          else 'Oct-Dec'
   12                  end Quarter
   13   from date_data;
  
  DT        QUARTER
  --------- -------
  01-JAN-15 Jan-Mar
  10-APR-15 Apr-Jun
  20-SEP-15 Jul-Sep
  31-DEC-15 Oct-Dec
  
  SQL>
  

• What is the use of syntax in brs fix (fy15) below "account" (if ismbr ("jan")) endfix ".

  What is the use of below the syntax in (brs) fix (fy15) 'account '.

  If (ismbr ("jan")))

  = Jan Feb.

  endfix

  I want to know what ("account")

  The parenthesis is the synax is needed.

  ('Account'

  a = b + c;

  )

  Will give the same results as

  a = b + c;

  However,.

  ('Account'

  IF (@IsMbr ("Jan")

  a = b + c;

  Endif

  )

  Will work

  IF (@IsMbr ("Jan")

  a = b + c;

  Endif

  Will error.  So, you must create the block of Member to identify the Member on which you want to put a formula for Member ('account' in my example) and the help of the parenthesis as with all other functions (for example if (())

• How to force ASO to summarize Jan, Feb, Mar to Q1?

  Hello

  I have a formula MDX (allocated salary) that does not work at level 1 of the period - such as Q1.  It only works in times such as Jan, Feb, Mar, level 0 members.

  A solution is to let MDX formula calc for Q1, then forcing her sketch to calculate the sum of Jan, Feb, Mar to Q1.  Our plan has Jan, Feb, Mar stored and Q1 has a sign summing up Jan, Feb, Mar, + consolidation.

  I put the order of resolution 0 MDX formula.  I put Jan, Feb, Mar solve order to 0.  I put Q1 solve order to 1.  It did not work.  1st quarter always displays the result of the MDX formula.

  How can I force ASO to summarize Jan, Feb, Mar to Q1?

  Thank you.

  It is an absolutely classic ASO issue that can be addressed in the SER60. It's the same problem that this user was seen earlier today: Essbase ASO aggregation issue

  Always stored hierarchies consolidate before the MDX formulas are executed. Any order of resolution you set in the stored hierarchy. Essbase you shouldn't let this (together solve orders on stored hierarchies) because it is literally meaningless. But it doesn't...

  One option is to use the approach in this other thread; essentially, if you have a formula on ABC Member which is 'X', write it like this (pseudocode, of course):

  If Period.CurrentMember.Level = 0 then X

  Else sum (Period.CurrentMember.Leaves, [ABC])

  This means that if you are parent at a level in the time dimension, the formula will be executed for each period of individual sheet level, and the results.

  There is a decrease in performance of queries to this approach. The other option is to use a procedural computation of the ASO ("execute calculation" or "run allocation" orders) to calculate the formula and to store the results at level 0 who then normally ride. This must of course be run on a schedule, so you lose the ability to ASO to instantly reflect the changes in the input data. But that may or may not be a problem depending on how your application is used.

• registered MySQL 5.6 review for 2016 Jan - soon MySQL 5.7 released

  I took a 5.6 MySQL training. Will try the new review on January 2016. Already made an appointment.

  but soon 5.7 MySQL will be released.

  Should what version I? The review, that I registered or an update?

  If I fail in 2016 Jan can I redo 5.6?

  

  Should what version I? The review, that I registered or an update?

  When new versions come out for which there is a test, OR does one of two things:

  1 turn off an entirely new review (i.e. 1Z0-063/12 c vs 1Z0-053 / 11 g)

  2 validate the existing review against the new version.

  With reviews of the Oracle, minor releases (i.e. 11,1-> 11.2) are always a validation. I suspect that this is what will happen with MySQL.  When the reviews are validated, no * new * material is added.  Instead, the existing questions are checked to ensure that they are true to the original * and * new version.  This may mean to remove or edit a question, if it refers to something that has become wrong with new version.

  If a new exam is created, Oracle is very likely delete the review liked for some time.  Certainly if they decide to, there will be an announcement of retirement several months until the exam is no longer available.  In both cases, I do not see a problem for your situation.

• Jani [programs do not work after migration to Mac]

  I got a new iMac and the store to transfer my data.  My Photoshop and Dreamweaver programs say now I have a Premium trial and will need to purchase to continue to use it.  How can I get these to work on my new iMac?  I bought these January or February 2013.

  Jani

  [As published for the clarity of the question and the future forum search... MOD]

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -Membership questions and problems https://forums.adobe.com/thread/1146459

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  Lost information - response #1 to https://forums.adobe.com/thread/2008767 if you do not have your serial numbers

• ORA 00904: invalid identifier "JAN".

  Hello

  I have the rest of the table.

  ===========================================

  create table ATT_ATTENDANCESHEET as

  (

  Select 1 empid, to_date('21/01/2014','dd/mm/yyyy') prdate, 240 reg, 0 unpaid all double union

  Select 2, to_date (January 21, 2014 ', ' dd/mm/yyyy'), 200 reg, 0 unpaid all double union

  Select 3, to_date (January 21, 2014 ', ' dd/mm/yyyy'), 240 reg, 0 unpaid all double union

  Select option 4, to_date (January 21, 2014 ', ' dd/mm/yyyy'), 480 reg, 0 unpaid all double union

  Select 5, to_date (January 21, 2014 ', ' dd/mm/yyyy'), 240 reg, unpaid double 0

  );

  =================================================

  I want to remove rows from table ATT_ATTENDANCESHEET.

  If the parameter passed empids, lines for employees would be eliminated.

  If empids is null, all records between the given period will be deleted.

  I created after the procedure to that effect.

  ------------------------------------------------------

  CREATE or replace FUNCTION deleteAttendanceDetails (startdate DATE, enddate DATE, empids varchar2) RETURN NUMBER as

  
  

  n number;

  condition varchar2 (200);

  vsql varchar2 (2000);

  BEGIN

  IF empids is not null

  THEN

  condition: condition = |' and empid in ('| empids |') ' ;

  END IF;

  vsql: =' delete from ATT_ATTENDANCESHEET where prdate between ' | StartDate | 'and' | EndDate | condition;

  EXECUTE IMMEDIATE (vsql);

  return n;

  END;

  /

  The empids parameter contains the employee IDS separated by commas.

  for example

  "1,2,3,4"

  -----------------------------------------------------------

  But when I call this function using

  Select deleteAttendanceDetails (to_date('25/01/2014','dd/mm/yyyy'), to_date (' 01/31/2014 ',' dd/mm/yyyy'), ") double;

  I get the following error

  ORA 00904: invalid identifier "JAN".

  ORA-06512: at.. .line 21

  I use oracle 10g.

  Help, please

  Do not use dynamic sql. It's more trouble that it's worth.

  Your error comes from the fact that you convert a date to a string, implicitly and then come back.

  In addition, your example doesn't have a field of prddate... so I added that, in my test table so that it works.

  Try something like that, entirely avoid dynamic sql:

  CREATE or replace FUNCTION deleteAttendanceDetails (
                                startdate DATE,
                                enddate DATE,
                                empids varchar2
                             )
     RETURN NUMBER
  as
     n number;
  BEGIN
     delete from ATT_ATTENDANCESHEET
        where ( empid IS NULL
              OR empid in ( select regexp_substr ( empids, '[^,]+', 1, level) empid
                           from dual connect by level <= (LENGTH(empids) - LENGTH(REPLACE(empids, ',')) + 1)
                        )
              )
          and prdate between nvl(startdate, to_date('01-jan-1900','dd-mon-yyyy'))
                         and nvl(enddate  , to_date('01-jan-5000','dd-mon-yyyy'));
  
    return n;  -- what is "n" ?
  END;
  /
  

  Not really sure what you want to do with "n"... you have nothing in your code... so I did the same

• Sort of the months of jan - Dec

  Hi all

  I wrote the code to display the month where every employee has joined

  Select ename, empno, to_char (hiredate, 'month') as MÓJ

  WCP

  order by 3;

  O/P:

  ENAME

  EMPNO MOJ

  JONES	7566 April
  SCOTT	7788 April
  SMITH	7369 December
  FORD	7902 December
  JAMES	7900 December

  I need my exit list of jan to dec and not in alphabetical order from a to z. Therefore, kindly help me in sorting.

  Also, I heard that we can set the month of jan-dec using decode. If none knows it too kindly let me know

  Thank you

  Hello

  If you want the ' January the first, no matter what year they are in; is this fair?

  Here's a way

  SELECT ename, empno

  TO_CHAR (hirdeate, 'months') AS Mój

  FROM scott.emp

  ORDER OF TO_CHAR (hiredate, 'MM')

  ;

  You can use an expression BOX (or DECODE) If you really want to.  It would not be difficult, just to long (12 WHEN...) Branches THEN, according to your needs).

• EEE in the UK. Ending 6th Jan?

  Hi people,

  We are a large school, currently with CS6.

  We are looking to move to the CC, but don't really have the budget to examine it until April. We asked our dealers to advise us of any changes to the EEA (contract for education), because it is by far the best way for us to buy - 85 FTE of staff vs 500 PCs.

  The dealer said that the EEA ends 6th Jan (2016), and only the system of license K12 will remain. The latter is much more expensive (about 4 times) as it is licensed per device, and I think do not include the full range of the CC, as well as EEA. 4 x the cost is unaffordable for us, so as the EEA.

  Is anyone aware of the EEA ending 6th Jan? Is K12 the only alternative to educational license

  This really worries us as it could we lock out using the Adobe product.

  Thanks for any help.

  This link has a summary of courses - see if it helps:

  http://www.Adobe.com/UK/volume-licensing/education.html

• Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. suddenly lightroom won't start when I try an image I tak

  Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. Suddenly, lightroom will not start when I try an image that I have taken with my nikon D500 and transferred to WINDOWS 8.1.  I tried to re - install lightroom: the application procedure serieal number, but refused to accept the number that has always worked. Help, please!  Jan

  If you are certain that you have the correct number of series, there are really not much that we can help you here. You can try to download and install the latest version of Lightroom 2. This will be the trial version, but when the trial screen there is an option to indicate that you have a serial number. Either way, Lightroom serial numbers start with the four first digits being 1160.

  Adobe - Lightroom: for Windows: Adobe Photoshop Lightroom 2.7 - English, French, German

• 13696242 is - even in the OCTS, jan psu?

  Hello
  
  I am applying 14841385 GI PATCH UPDATE SET 11.2.0.2.9 on my RAC database.
  Database version: 11.2.0.2.8
  
  When I unzipped JAN13 psu downloaded patch I found 13696242 patch also included therein, while implementing a JAN psu I get warning of set-aside can I ignore this same patch number is already applied previously OCT IM psu
  
  ([23 January 2013 05:51:05] 1) YES-67632:
  The following patches are already installed in the home of the Oracle.
  [13696242]
  Please roll back existing identical patches first.
  [Jan 23, 2013 5:51:05 AM] --------------------------------------------------------------------------------
  [January 23, 2013 05:51:05] YES - 67008:OPatch Session is complete warning.
  
  Kind regards
  Renault M

  The two are equivalent - you can continue a line of conduct

  HTH
  Srini

• Selection of Jan to Dec

  How can Sir I select Jan to Dec in a Dual from SQL

  SELECT to_char (to_date (rownum, 'dd'), 'Month') of double connect by rownum<>

• Why package manager to answer me: NotAfter Tue Jan 24

  When I compile my swf with Packer (sdk 3.0) the break execution, write me: NotAfter Mar 24 Jan.

  I have to change the date of my computer and after re - compile.

  Thank you

  I found the problem, the .p12 and .mobileprovision have expired, I emphasize the p.12 and .mobileprovision must do it again.