JavaLoader install programmatically

Similar Questions

• How to get the amount of memory installed?

  (It's under the Windows operating system)

  I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware.

  What is the best way to get the amount of RAM installed programmatically?

  How do I know if the OS is 32 or 64 bit?

  Thank you!

  Well, it does not resemble the Memstats VI returns the memory installed. It returns a number, but I can't match the amount of memory installed on my system. The GetCurrentPlatform seems to return only the name of the OS, not whether 32-bit or 64-bit. I see nothing in the App-> target list containing this information. At least to 8.2. Did not check in 2009.

  Altenbach says:

  (It's under the Windows operating system)

  I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware.

  What is the best way to get the amount of RAM installed programmatically?

  How do I know if the OS is 32 or 64 bit?

  Thank you!

  Define "better". Best in speed? Better compatibility on multiple versions of the Windows operating system? Best in terms of access to this information without having to delve too in all sorts of types of data Windows and DLLs?

  Would you consider .NET stand for the 'best '. If so, the amount of RAM installed can be gained from easily using the Microsoft.VisualBasic.Devices.ComputerInfo class:

  

  To determine whether your OS is 32 - bit or 64 - bit are you trying to make a distinction between a 32 bit on a 64-bit CPU vs OS a 64 bits on 64-bit OS? I know that the WMI class can be used to obtain this information, so if you try to make this distinction, you could watch the Win32_ComputerSystem and Win32_Processor classes. For example, I think that what follows is what you would see:

  OS 64-bit on x64processor:
  Win32_ComputerSystem.systemType = pc x 64
  Win32_Processor.addresswidth = 64
  Win32_Processor.architecture = 9
  Win32_Processor.DataWidth = 64

  32 bit on x86processor OS:
  Win32_ComputerSystem.systemType = x 86 pc
  Win32_Processor.addresswidth = 32
  Win32_Processor.architecture = 0
  Win32_Processor.DataWidth = 32

  OS 32 bit on x64processor:
  Win32_ComputerSystem.systemType = x 86 pc
  Win32_Processor.addresswidth = 32
  Win32_Processor.architecture = 9
  Win32_Processor. DataWidth = 64

  I've attached an example on how to access the classes with .NET. Not pretty, but not too bad either.

• How to get the installed Application timestamp programmatically

  How to get the installed Application timestamp programmatically

  Can you please help me.

  http://www.BlackBerry.com/developers/docs/7.1.0api/NET/rim/device/API/system/CodeModuleManager.html#...

  I'm sure you could find yourself by reading the API.

• How can install a blackberry app without using "javaloader" of JDE. ???

  Hello

  We develop a blackberry using JDE application.

  Now, we try to run this application on real BlackBerry.

  We already know that we can use .cod file and download this .cod to a utility called «javaloader»

  located in bin of the JDE.

  But what happens when the user doesn't have a JDE install on their system.

  So how the user can download this application without using «javaloader»

  Thank you.

  Director of office of dowload.

  http://NA.BlackBerry.com/eng/support/software/desktop.jsp

  Connect your device to BB and PC via a USB port.

  Select the responsible Application of Option.

  Select your. ALX (can be created in your JDE-> project-> generate ALX file)

  Complete the Installation.

• Install updates programmatically

  Hello!

  I want to do my own app updates system, but need help.

  What I want in general:

  -On a server will be the current version app file and file descriptor (number version etc.)

  -At the start of the application, I'll check last version app with the version in the descriptor file, if it less-> download the latest app

  But then how do I install this file (updated app version) by programming?

  This is not possible, the only way to install native applications is using world bb or sideloading.
  Why android applications can be installed OTA while native applications cannot remain a mystery, I suppose.

  Why don't you have mechanisms to update provided by the world of bb?

• Detect programmatically whether AutoVue DD is installed (Windows/Linux)

  Hello

  I need help to detect if the user AutoVue Desktop Deployment installed (on Windows/Linux operating systems) via Java. Under Windows I thought on the lookout records under "HKEY_LOCAL_MACHINE" without success (at least, I couldn't find any registry on AutoVue). Under Linux, I suppose I could use something like 'whereis' to find autovue.exe, but Windows is a priority at the moment. Hope you guys can help me pointing a few ways to solve my problem.

  Thanks in advance.

  Hi Lucas,.

  This seems to be a question of Java/Windows rather than a specific safety issue. Check Registry sounds like a good approach. If DD AutoVue is installed you should be able to find it under the same registry path where you can find other programs installed (for example HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall). Remember, if you have installed on 64-bit, it could be in the "Wow6432Node" path under \SOFTWARE.

• Generate url for virtual machine installed on vmware server console programmatically

  Hello

  I want to generate URLs for machine vmware console located on vmware server. Are there examples of available in c# code? Any help will be really good.

  Thank you.

  Hello

  There are already several posts/Articles on this subject. What works for ESX should work for VMware Server. The misfortune is that it should be avoided for several reasons:

  (1) there are only a limited number of "consoles" allowed for a given server of VMware

  (2) RDP/VNC is a tool much better for this as there are no such limits

  (3) the security of this method is somewhat limited

  (4) more than one user can access the same VM without protection of the user (essentially a struggle for control)

  So in general, it is best to RDP/VNC in the virtual machine is to use the console.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Can I configure programmatically installed virtual machine?

  Hey guys, y at - it a low level that allows me to configure the virtual machine using c# api? (like increasing the memory or the addition of n/w adapter) VIX api does not have such functions.

  Take a look at the vSphere API and you should also take a look at this document if you're new to vSphere API/SDK - Getting Started with vSphere SDK - Update for SDK 4.1 release

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Get the byte [] for a COD that is already installed

  Anyone happens to know and be willing to share, how to get the byte [] for a COD package that is already installed on the device?

  Thank you

  There is no API on the device that allow you to programmatically access binary data of a cod file.

  You can copy files of cod on a BlackBerry Smartphone using javaloader.

  JavaLoader u save filename.cod

• Satellite L40 12 x: black window when installing XP

  So I am tring insatll Windows XP on this laptop, I downloaded the Intel Matrix Storage Manager, driver 7.5.0.1017 Toshiba dirvers production version web page. I've added it to windows XP install disck nLite programmatically.

  After that, I tried to install windows and after cominicate "instalator is checking system configuration" I just black window.

  Can someone show me where I can download drivers seems OK cuz who doesn't...

  Have you used the Windows XP with SP1 and SP2?

  You should do this! I've noticed several problems during the installation of the OS without SP2 included!

• I have an installed with real-time PXI-8109 module. Displays the indicator USER1?

  Hi all

  I have an installed with real-time PXI-8109 module.

  USER1 indicator LED displays on the Panel?

  Thank you

  The LEDs of the user are the indicators that you can control programmatically if needed be.

  -Jayk

• Is it possible to find in which case is run in LabVIEW VI programmatically and display it...

  Is it possible to find in which case is run in LabVIEW VI programmatically and display it...

  I have published earlier the plugin Quick Drop here - https://decibel.ni.com/content/docs/DOC-38903#comment-36562 there is more information on how install or use it.

• Determine what are the cards OR are installed on a computer using Labview

  Hello people,

  I hope that it is a matter appropriate for this forum.

  Is there a way to programmatically determine the cards OR are installed in a computer using Labview?  We have a limited number of test for material Exchange computers sometimes.  I would like to write a collection of Labview applications to know what hardware is installed and then perform some configuration based on the hardware settings.

  Best regards

  Chris

  Hello

  Looks like than what you may have here: complete peripheral extraction and list of channels dynamically.

• Programmatically determine the PCI device ID

  Hello again all you lovers forum useful!

  I am writing an application for exit to and read entry from ARINC PCI card, specifically the ICAN-530 of GE Intelligent Platforms.  Now their LabVIEW drivers and the documentation is pretty good, but one of the things that I have a problem with is how to determine the ID of the Board of Directors.

  The documentation on this Board ID is marked "for PCI devices, this Council number must match the device ID assigned when the installation of the API and the corresponding device has been installed."  I'm sure that I have discovered this using MAX, but what I really want is to determine if the laptop running my application has this card special in it ARINC and if so what is its device ID, by any program without the user to select or install MAX, etc.

  I hope it's doable, but I failed to find the right screw looking through this forum and in the pallets of LabVIEW.  If someone could point me in the right direction (or definitely state that it can be done programmatically), I would be very grateful.  :-)

  Thanks in advance!

  -Joe

  Just in case where someone else finds this useful thread in the future, I got the following response from GE Intelligent Platforms (who I bought the card), that indicates there will be a relatively simple way to reach my goal by using the LabVIEW drivers.  I have not tried so I can't guarantee its effectiveness, but it sounds good.  :-)

  If the only GE avionics installed is the ICAN-530, he would have no problem invoking AR_Board_Init until you encounter a status of passage; However, if there are other cards installed AND the distribution of the CIS - x 30 - SW is installed on this host, there is a mechanism to check room types.

  The AR_Query_Device of VI VI provided in CIS - LV Version 4.10 (latest version and probably the one would have received you if purchased with the ICAN-530), can be used in the following sequence to check such allocation device number on your system without actually opening a session and during the initialization of the Council.

  (1) call AR_LoadDLL.vi with the set control system Type to be 'CIS - x 30'.

  (2) call AR_Query_Device.vi in a loop (BoardIDIn control incrementing from 0 to 15) until the indicator of Type of card is returned in 26 (type for ICAN-530) AND the errorOut.code '1 '.  The BoardIDOut indicator will be the Deviceid for the ICAN-530.  Council for the VI types are described in the online documentation and printed for CIS - LV live.

  (3) If you will be running your application, you can just go forward on the basis of the VI AR_LoadSlv and waive AR_Board_Init (as AR_Board_Init is just a combination of AR_LoadDLL and AR_LoadSlv).

  (4) If you plan on using it to work with any other type of Council other than a CIS - x 30 Board, you must call AR_UnloadDll.vi to remove the library API CIS - x 30 memory.

• How to programmatically change the z axis limits

  Could show you how to change axis limits (min and max) z programmatically in the attached VI?  It's a simple VI that uses the 3D curve.  Wouldn't be the same on x and thus value axes?  Would appreciate your ideas.  Thank you.

  Hello

  I don't have a LV 7 installed so I can't post the sorry VI... Here's the answer to your question, you must use property nodes and method in the palette of ActiveX (see screenshot), 0 is X, item 1 scale scale Y and point 2 is titled Z scale.

  

  More generally there are lots of discussions on issues of 3D graphics, just do a forum search .

  Hope this helps