JMS persist Store: how to store the messages in a table?
Hi allI'm looking to create a composite that stores messages to a JMS queue on a custom table created. Please advise if the following approach is correct.
1 has created a table within the dev soainfra: TEST_TABLE
2 created a wls data source to point to the table: TestDS
3. has created a persistent store based on above data source: TestStore
4. has created a server with TestStore JMS in the persistent store: TestServer
5 has created a JMS Module and the queue to the breast (* TestMod * & jms/TestQueue) it addressed to the TestServer.
I created a JMS in my composite adapter configured to use my queue jms/TestQueue. The JNDI name used for the JMS adapter is the environmental assessment environmental/wls/queue.
I ran a test and see nothing in my table. Is there something that I missed?
JDev version: 11.1.1.4
Thank you and best regards.
in response to
Also, how you consume messages from this table when the data is to the LONG RAW format?
You do not have. It is an integral part of WLS JMS. You consume messages using a JMS consumer, whether another instance of the adapter or another java client. If you start deleting messages from this table manually, you will mess up JMS and cause of exceptions. I suggest you leave well alone.
Tags: Fusion Middleware
Similar Questions
-
FND_REQUEST. SUBMIT_REQUEST stores error messages in which table
Hi all
FND_REQUEST. SUBMIT_REQUEST returns the value ZERO means there's an error by calling the concurrent request and request is not submitted.
I want to know the error exact message triggered. How can I can see the error message.
Don't FND_REQUEST. SUBMIT_REQUEST stores error messages in any table? If Yes, who is the table she uses to store errors?
Thank you
Nanga
Each simultaneous program has a log file and they can be found on the server under $APPLCSF / $APPLLOG directory.
You will have to perhaps enable trace and debug capture details on this CP.
Thank you
Hussein
-
How to remove the message "not using current Version" boring?
For months, my Firefox home page included a note that I do not have the latest version and provides a link to update. When I use the link I said "Congratulations, you are using the latest version." Adding insult to injury, there are not 20 minutes, I downloaded 27, and the message is still there. Almost the end of the world, but at this point, it is very annoying. How to remove the message?
The old page of Google-Firefox has not changed since Firefox 4 is released, please disregard the information updated on this page.
-
I was typing an email and press the 'Save as draft' button by mistake. Now I don't know how to recover the message. Any suggestions for anyone?
Or in the menu button, there should be an option "folders." Look for the drafts folder.
-
How to open the message app and past email address to send a new email
I'm looking for a way how to open the message application to create a new email and the definition of the field emailaddress my application programmatically.
I think that this should be possible, but it seems that I have did not use keywords to find it on goolge or this forum.
any ideas?
http://www.BlackBerry.com/developers/docs/6.0.0api/NET/RIM/BlackBerry/API/invoke/invoke.html#invokeA... net.rim.blackberry.api.invoke.ApplicationArguments)
with
specify what you want to be pre-set in the subject of the message
-
How to get the message to debug all to running page request OFA?
Hello
How to get the message to debug all to running page request OFA? do not use JDeveloper
Thank you
Renon,
this.writeDiagnostics will be work AM and not CO. You mentioned that your code is AM, which is why I give (this.writeDiagnostics).
You get an error when you use what to ? AM
in CO, you must use pageContext. writeDiagnostics();
You don't need to put any profile (other than DNF: Diagnostics), you just need to go to the Diagnostics - select the log on screen and choose the level that you used in the writeDiagnostics method.
See you soon
AJ
-
How to activate the message window to run from published resources
HI -.
Can someone tell me how to activate the message window, or something similar, to executing the script trace published resources.
While I can use the message of the Director IDE window, what I want to do is use it when I execute scripts in time real (published resources).
So my question is confused or upset the terminology, I apologize.
I am very new to the use of Director (11.5).
Thank you very much.
Bob
You can consult the help file of the Director for more details (minimum). You will see output in the message window when your code runs a statement 'put' (or 'trace'). However, you can use it as you would the application Message window by execute arbitrary code when you press ENTER at the end of a statement (without comment).
Your whole project works like a projector or in Shockwave (in a browser)?
-
How to format the message in the response
Hi all
Please let me know how to format the message in the response.
Sorry this is not the case associated with sql, plsql. I went in the way of asking questions in the forums oracle instructions. But I did not find. Help, please...
I know this: when I write my thread I use.. to format the code ,but while replying how to include post with formatted text. Thanks, P prakash
>
Thanks for the reply, I would like to know how you included the message formatted in your answer.
Please let me know this...Hi again Prakash,
Easy - just put ">"at the beginning lines you want to quote. "
That is higher and space - when you answer, hit the double quotes in the bar
at the top of the post - last symbol to the right and it will be automatically
the post to which you want to reply.HTH,
Paul...
-
How to remove the message from the status bar in panelCollecion?
Hi all
Worm 11.1.1.3.0 JDev
How to remove the message from the status bar in panelCollecion?
I am getting "Hidden columns" in the status bar... I want to delete that?
Give suggestion...
Concerning
GOPsThe GOPs wrote:
Thanks for the reply, I tried the featuresOff attribute... but it is not working...As expected after the documents, since you are using JDeveloper 11.1.1.3.0 and not 11.1.1.4.0.
concerning
Jan -
Mr President.
How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?
Concerning
Normally at the height of the table control you need property autoheightRows -1 and then set height in the table like this inlinestyle
height: 300px;
-
How to get the title of a table with FDK?
How to get the title of a table with ad FDK C++?
I did people. I get objects table paragraph and later the textual elements for each of them.
-
How to use the Type of Oracle Table values in the Select statement.
Hello
I get the initial set of values in the Table of Type Records of the Oracle and want to use the list of values in the Select statement.
For example, try something like the following:
TYPE t_record () IS RENDERING
ID TABLEA.ID%type,
NO TABLEA.NO%type
);
v_record t_record;
T_table TYPE IS the v_record TABLE % TYPE;
v_table t_table;
-Code to fill the values of v_table here.
SELECT ID, NO, COLLECT in BULK IN < some other table variabes here > FROM TABLEA
WHERE ID IN (i) v_table USER.USER;
I want to know how to use the Type of Oracle Table values in the Select statement.Something like this:
create or replace type t_record as object ( id number, no number ) / CREATE or replace type t_table AS TABLE OF t_record; / set serveroutput on declare v_table t_table := t_table(); v_t1 t_table := t_table(); begin v_table.extend(1); v_table(1).ID := 1; v_table(1).No := 10; v_table.extend(1); v_table(2).ID := 2; v_table(2).ID := 20; SELEC t_record (ID,NO) BULK COLLECT INTO v_t1 from TableA FROM TABLEA WHERE ID IN (select t.ID from table(v_Table) t); for i in 1..v_t1.count loop dbms_output.put_line(v_t1(i).ID); dbms_output.put_line(v_t1(i).No); end loop; end; /
No test!
P;
Published by: bluefrog on March 5, 2010 17:08
-
How to track the message to two different queue using jms proxy service
Hi all
In my project, I need to listen to a jms queue, then forward the messages to the queue of two different.
Now, I already have a proxy for listening to the queue and then pass it to another queue using business service, it works.
But how to forward messages to two different queues in the same workflow process using a proxy and bs?
or in any other way?
Really thanks in advance.
Kind regards
KahlilYou can use actions to publish in the pipeline to achieve this.
-
How to intercept the Message event opened on existing messages Inbox
I asked in this thread for a way to override the event open Message in the Inbox so that I could see a message personalized with my own Viewer.
Doug suggested that I create a folder and message listeners to intercept events that interest me.
It works partially. The FolderListener can detect new messages coming, but he does nothing with the existing messages, so, in my app initialization, I loop over the existing messages and look for those to whom I want to fix a messageListener.
I reinforced with the code and see that the headphones are fervent. But the modified (event MessageEvent) method never fires on existing messages when I opened the. It fires only on messages received recently.
How can I catch the event message open for existing messages?
Also, when I catch the event on new messages, it opens my custom desktop, but when I go back to the list of messages, he had also opened the message with the default mail Viewer. Is there an equivalent to CONSUME_CLICK a button to say that if I got trapped in the event to just make my personalized treatment and not the default behavior?
Thank you!
Dave
What I do is I store the operating screen and close it after the event handling:
public void open(MessageEvent messageEvent) { if (messageEvent.getMessageChangeType() == MessageEvent.OPENED) { final Screen mailScreen = UiApplication.getUiApplication().getActiveScreen(); // DO YOUR THING WITH THE SCREEN String className = mailScreen.getClass().toString(); /* * Only close the active screen if it's the EmailViewerScreen. * * Note: This is undocumented so I'm not sure whether this will always work. */ if (className.endsWith(".EmailViewerScreen")) { UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { try { mailScreen.close(); } catch(Throwable t) { // log error } } }); } else { // log that Classname is not-a EmailViewerScreen } } }
-
How to remove the message "... now uses the full screen"?
When you switch to full-screen playing a video, the message appears that the site now uses the full screen, which is often boring because it blocks the part of the screen for a few seconds. How this message can be deleted?
In Firefox 40 and 41, you can probably remove this notification by setting full-screen - api .approval-required to false.
You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.
Maybe you are looking for
-
Hi our friend has an old e-mail address on his old phone and e-mail account is now closed he should drop his photos and has a new email address, how he retrieve it please
-
Drivers VGA controller Bus SM et al.
Nice day! Almost a year ago, I bought a PC HP Pavilion a6252d Home (a model available in Southeast Asia). It came with Windows Vista Home. Not wanting to go through the headaches that a good number lived with Vista, I asked store technicians to repla
-
WLAN on Satellite L505-10Z PSLS3E with Windows Server 2008
I have Toshiba Satellite L505 - 10Z PSLS3E on Windows Server 2008 and to install the WiFi driver but can't find the right installation files and I downloaded the Vista driver installation and the driver may be installed on the right but when I try to
-
Check the file system on C or registry cannont load the hive!
Ok... I have a Dell Vostro 1510... all of a sudden, I can't on this laptop! I have Windows XP Professional. It lights up when I choose to start windows... I am said to be: Checking file system on c: The type of the file system is NTFS. Volume label
-
Restart of Windows 7 and the computer freezes at the STATION
Hey guys, I have a very big problem with Windows 7 on my computer. I tried so hard to have Windows 7 installed on my computer, and literally nothing I do works. I'll also post plug at the bottom of this post for reference. This can be a little long,