kb2633171 a security update wont install windows vista and keeps on saying failed in the history of updates with the error code 80070020

Similar Questions

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Re-installed Windows Vista and now it says my product key is not valid and will not turn on.

  original title: Vista Down... Need help, please...

  HII...
  I have a problem now
  I use Windows Vista Home Basic
  Recently I formatted my pc and reinstalled it clearly...
  But my windows vista could not activated online... My product is properly pressed, but it still will not yet enabled
  I can't think of her
  Please help me someone
  THX
  Concerning

  You may be prompted to activate Windows Vista

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 931573

  Vista controls and SLMGR explained

  http://www.tech-recipes.com/Rx/2062/vista_activation_slmgr_command_options_explained/

• I have just re-installed Windows Vista and I can't find all the files he supposedly saved.

  I recently reinstalled vista (yes I know I should have bought mac) in any case I can't find all the files I've supposedly saved. any ideas? Thank you

  original title: Reinstall vista

  Hello

  You don't say how you have reinstalled or how or where or by which program or process, you saved your data...

  A relocation normally will wipe away the old operating system and all data during the resettlement process.

  You can try this free program to see if it can recover your data:

  http://www.Piriform.com/Recuva

  See you soon.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact, I was connected to internet

  Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact I was connected to internet... pls sumone help me solve this problem!

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

  original title: ACTIVATION of VISTA
  I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

  You simply have to use telephone Activation...

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• I get the error code 80070020 when trying to install (KB2507618).

  I have Vista Home Premium. I get the error code 80070020 when trying to install (KB2507618).

  I tried all the troubleshooting steps below and still no luck. I installed some other updates, today, August 19, 2011.

  Do I need to KB2507618 that came out in April of this year, or is it is replaced by an other update and or cumulative update?

  • Summary
  • Symptoms of the problem
  • CAUSE
  • Methods to solve the problem
    • Method 1: Restart your computer and install updates
    • Method 2: Start the computer in safe mode with networking support and install updates
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
  • Advanced Troubleshooting
    • Method 3: Perform a clean boot of the computer and then install the update
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
    • Method 4: Temporarily disable spyware and antivirus software
    • Method 5: Temporarily disable firewalls
      • Disable Windows Firewall in Windows 2000, Windows XP and Windows Server 2003
      • Turn off the firewall in Windows Vista, in Windows Server 2008, or in Windows 7

  Read the little free support in the Article:
  http://support.Microsoft.com/kb/2507618

• Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  error code 0x80070005

  Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
  http://support.Microsoft.com/kb/938450

  Error code 0x80070005

  Symptom
  When you try to use a KMS host, a KMS client, or a MAK to activate one or more computers, you may receive the following error message:

  0x80070005
  Access denied that the requested action requires elevated privileges.

  Cause
  This problem occurs if the user (UAC) access control does not allow activation of process run in a not high command prompt.
  Workaround
  To work around this problem, follow these steps:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as.
  2. click on the next user and then select Administrator in the user name list.
  3. click on OK.
  4. at a command prompt, type the following command and press the "Enter" key: slmgr.vbs

  J W Stuart: http://www.pagestart.com

• Can I install Lightroom 4 and keep Lightroom 3 works on the same computer?

  Hello

  Can I install Lightroom 4 and keep Lightroom 3 works on the same computer?

  Fred

  Yes.

  Mylenium

• Cannot install the security update. Received error Code 0 x 643. What is it? What should I do?

  Attempted to install

  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353).

  Not successful installation: received error code 0 x 643.  What is the problem?  Where can I find information to solve this problem?

  Thank you.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Use the foregoing as guides to solve the problem.

  If necessary:

  Click on the following link to download the .NET Framework cleanup tool:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  You can use this to check what versions are actually installed on your computer:

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx