Kill session

Similar Questions

• Edit-Kill sessions on SEEP

  Hi all

  Do you know if it is possible to put an end to certain processes or sessions on the PCB?, like the old days on essbase (rigth clik-> edit-> kill sessions)

  Concerning

  Coronel Robert

  Reading the following support doc - ' planning and budgeting Cloud Service (SEEP): how to kill the calculation process? (Doc ID 1934661.1) »

  It is similar to on site

  

  

  See you soon

  John

• Can't kill session 11g WINDOWS 2008

  Hoping someone can tell me how to kill a job that won't die :)
  
  We had network maintenance during the weekend that interrupted the connection between our server and the database. It caused a lot of jobs to get stuck. I could kill all but a job. The last task seems to be busy reading, but the session info does not appear any sql.
  
  BOTH OF THE COMMANDS RETURN ERROR below: "ora-00030: user session id does not exist ' and info session continues to say"active">
  ALTER SYSTEM KILL SESSION '8,46534' immediate;
  change the session disconnect system '008,46534' post_transaction;
  
  
  
  Any idea what I can do to kill this work? Startup of the database is not a possibilities.
  
  Thank you!
  Kathie

  you try to kill a job, not a session, right?

  Check this box:
  http://levicorp.com/2009/05/22/how-to-kill-the-running-job/
  http://www.Pythian.com/blog/killing-an-Oracle-job-dead/

• alter system kill session

  Hello
  
  While killing a session, I get a message like
  
  QL > alter system kill session '802,30515' immediate;
  alter system kill session '802,30515' immediate
  *
  ERROR on line 1:
  ORA-00031: session marked for kill
  
  I checked after a few hours again, I get the sid and the n serial form v$ session
  
  
  but the status of the user of the user is as 'dead '.
  
  SQL > select user name, session status $ v where sid = 802;
  
  STATUS OF USER NAME
  ------------------------------ --------
  APPS KILLED
  
  
  If the session was killed or not?
  
  Thank you
  Vijay

  887400 wrote:
  Its Linux X 86 64-bit

  But for some sessions, they will be killed immediately after alter system kill session command.,.

  but in this case it is not end immediately?

  What could be the cause?

  Internal Oracle session remains as long as the remains of operating system processes.

  Kill - 9

  Since you have already issued ALTER SYSTEM KILL SESSION
  You can't get the process ID of the Oracle's OS.

  You can associate up to the session Oracle with OS time as evidenced by time of CONNECTION
  ps - ef | LOCAL grep

• How to kill session

  Hello
  
  I used Toad 7.6 earlier. Now, I installed 9.5.0.31 Toad. I am not able to kill the user session by clicking on the session to kill as in my earlier version.
  Please tell me there at - it another way to do this or something?
  
  Thanks in advance
  
  Ashish Sharma

  Hello

  This is a useful article to kill oracle sessions: [http://www.oracle-base.com/articles/misc/KillingOracleSessions.php]

  You can use these instructions:

  SQL> ALTER SYSTEM KILL SESSION 'sid,serial#';
  

  11 g:

  SQL> ALTER SYSTEM DISCONNECT SESSION 'sid,serial#' IMMEDIATE;
  

  Kind regards
  Csaba solution

  Published by: Paintek_HU on 2010.07.22. 01:42

• grant to kill session

  Hi all
  What is the concession that allows me to kill a session?
  Would it ALTER SESSION?
  Or do I grant DBA?
  
  Thanks in advance
  
  Sappo

  The command is
  alter system kill session
  If you need
  change the system privileges
  If you don't want this, make sure that you write a procedure in an account that already has the privilege, and grant execute rights to unprivileged users.

  --------
  Sybrand Bakker
  Senior Oracle DBA

• S/n kill sessions. Why?

  After reading session$ v, I recorded in several sessions and questioned session $ v and find details of all the sessions that I had opened. During my research, I read that the DBA sometimes kill sessions.
  
  1. why a dba should kill a session database, where the user can disconnect session? What are the different reasons why a dba should kill the database sessions?
  
  2. what command is used to kill a session of database?
  
  Thank you
  Gueye

  Hello

  DBA should kill session for several reason.

  (1) even after a user presses Ctrl + C, it is possible that the session is not to disconnects and the application keep getting executed

  (2) user has lost the window where he was the execution of the query (perhaps because of the power outage)

  (3) the ADMINISTRATOR wants to do some maintaiance and he does not know, or it is difficult to find from which the query is executed

  (4) if the session is created by a process of batch processing, this batch is finished but the session does not work.

  2. what command is used to kill a session of database?

  Rep. : alter system kill session ',';

  Concerning
  Anurag Tibrewal

• Problem with kill session

  Hello
  
  I want to kill one of my session and I can't :/ I paste this query:
  SELECT sid, serial #, osuser, program, server, machine FROM v$ session;
  
  Find the sid and serial # my process and carry out this change the command:
  alter system kill session '544 793';
  
  So, I can see this output:
  change kill system succeeded.
  
  But once retype selected first, I still have a trial '544 793'?
  Might explain my why?

  Tutu wrote:
  I don't have the privileges to kill the process level OS :/ That from database. But what this process is KILLED? She still exists in the database, is not it.

  Yes, the process is still in the database, using the amount of space between the sessions and processes and other resources of the system as well.
  There may be several reasons for this:
  1 session remains in this status as asociated process is not killed, for example session expected SQLNet client message. Customer at the moment would be an activity that he would receive the error and the session would leave.
  2 PMON can do sometihng with this session. Doing little cleaning, then kill is issued and this session remains for some time.

  In order to get rid of this session - ID opsystem kill command. If do not have rights - you ask someone who has.

• kill session vs kill session immediate/post_transactional

  A DBA, I sometimes kill sessions in SQL * more by entering the command ' ALTER SYSTEM KILL SESSION ' xxx, xxxx '; The session ends quickly, sometimes it takes sometimes minutes for the killed session to go.
  
  When to use Enterprise Manager Grid Control to kill a session that I have to choose between a 'kill immediately' or 'transactional Message. When I kill a session by entering a command from SQL * more I do not use one of these options.
  
  I'm trying to understand the consequences of the use of the two options available via the grid control. Clause of some forum posts suggest you use IMMEDIATELY"as a last resort. According to them, he couldn't prevent a session from filling out a cancellation of the updates because the operating system process stops immediately. Read that a description of the clause POST_TRANSACTION makes me think of issueing what the command against a long query term will allow him continue to run and end the session only after the end of the SQL query. For now I avoid using one of the options of the grid control and stick to my original format in SQL * more.
  
  Could someone shed some light on the difference between killing a session with or without KILL it IMMEDIATELY or POST_TRANSACTIONAL' options?
  
  Thank you
  Bill

  Hello

  If I order, "the ALTER SYSTEM KILL SESSION ' xxx, xxxx ';

  allows you to mark a session as null and void, restore the ongoing transactions, releases all session locks and partially recovery of resources from the session. If the session is running an activity that must be completed, as the wait for a response from a remote database or rolling back a transaction, then Oracle Database expects this activity complete, mark the session as being finished and then returns control to you.

  If I order, "ALTER SYSTEM KILL SESSION ' xxx, xxxx" IMMEDIATE. "

  Specify IMMEDIATE to load the Oracle database to ongoing transactions, releases all session locks, recover session state full and immediately returns control to you. You wrote end immediately with no cancellation of updates?. This is not so, it will rollback all not updated.

  If I execute the command ' ALTER SYSTEM KILL SESSION ' xxx, xxxx "POST_TRANSACTION;"

  The POST_TRANSACTION parameter allows operations to be completed before the session is disconnected. If the session has no current transaction, then this clause has the same effect as to KILL SESSION.

  Reference:-[http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_2013.htm#SQLRF00902]

  HTH
  Anand

• Killing sessions.

  Please
  
  Why after sending:
  
  ALTER SYSTEM KILL SESSION '155,54173' IMMEDIATE;
  ALTER SYSTEM KILL SESSION '190,65416' IMMEDIATE;
  ALTER SYSTEM KILL SESSION '215,49199' IMMEDIATE;
  ALTER SYSTEM KILL SESSION '232,38533' IMMEDIATE;
  
  Sessions do not die immediately?, how can I remove the sessions? I asked the user to close all applications but the sessions always there.
  
  Thank you

  You can try to killing the operating system process or thread:
  
  1. Killing sessions in WINDOWS 2000/NT
  issue in a DOS command window:
  orakill sid thread
  
  where sid    = the Oracle instance to target
          thread = the thread id of the thread to kill
     The thread id should be retrieved from the spid column of a query such as:
           select spid, osuser, s.program from
          v$process p, v$session s where p.addr=s.paddr
   You can find ORAKILL.exe in $ORACLE_HOME\bin
  
  2. Killing sessions in UNIX:
  
  select vs.sid, vs.username, vs.osuser, vs.process fg_pid, vp.spid bg_pid
  from v$session vs, v$process vp
  where vs.paddr = vp.addr
  
  SID  USERNAME        OSUSER     FG_PID    BG_PID
  ---- --------------- ---------- --------- ---------
  14   QZBHS1          QZBHS1     2924:3744 1948
  29   QZBHS1          QZBHS1     3632:3844 15452
  51   QZBHS1          QZBHS1     4644:3892 5438
  
  Issued in unix (as the oracle unix user, the user thats owns the database) :
  
  kill -9 1948
  kill -9 15452
  kill -9 5438
  
  Hope this can help you.
  

  The link
  [http://www.experts-exchange.com/Database/Oracle/Q_20821840.html]

• How to kill session reverse

  Hello
  I have reverse cube essbase, its operation for 3 hours, I want to kill the session, tried to stop the session of the operator, I got a messgae saying "" Stop Failed, java.lang.NullPointerException ".we are on the 10.1.3.How version, I can kill this session."
  
  Please help me
  
  Thank you

  If you reverse designed by using the local agent, then most likely the session is already killed.
  Operator relies on the agent to update the job repository performance logs to indicate the State of the session.
  Since then, agent (for some reason any) could not update the run log, the operator will continue to show that the session is running.
  You can mark the session as error/fill yourself and that will update rep work logs.

• Grant restricted and kill sessions.

  Hello.
  
  We grant user 2 privs.
  
  (1) user XXX need turn on and off a session restricted to DB. Can agree some priv him to do? Or it can do only DBA?
  (2) user XXX need to kill all sessions, not only sessions in her scheme.
  
  Can we do this?

  This is because by default AUTO_DROP is set to TRUE when creating jobs. Try the AUTO_DROP parameter set to false during the creation of employment:

  auto_drop => false
  

• Impdp killed session

  Hello
  
  I import a table, without knowing I killed the TOAD session. Now when I try to remove the table that has been created it throw error:
  
  "resource busy and acquire with NOWAIT specified.
  
  I tried to look for locks, if any, but could not find. Can anyone tell how to remove this table?
  
  Thank you

  Note: 262557.1
  (1) select * from dba_datapump_jobs;
  OWNER_NAME JOB_NAME OPERATION JOB_MODE STATE ATTACHED_SESSIONS DEGREE
  =================================================
  SCOTT SCOTTEXP EXPORT SCHEMA DEFINING 1 1
  SYSTEM SYSEXP TO EXPORT COMPLETE 2 3 ENFORCEMENT
  SYSTEM SYSIMP IMPORT TABLESPACE STOPPING 2 0
  EXPORT OF FULLEXP COMPLETE SYSTEM DOES NOT WORK 0 0
  EXPFULL EXPORT SYSTEM FULL 1 1 IDLE

  (2) $ impdp scott/tiger attach = scottexp
  . . .
  Import > kill_job

  * If your problem has been resolved consider closing the wire ;-)

  Published by: Enrique Orbegozo on October 10, 2008 12:50

• How to find the lock and kill session in order to release it?

  Hi all

  EBS R12.2

  "I met ' could not book record" in our case. How to release the session locked?

  I usually do this by bouncing the apps & db level. Is their subtle way?

  
  

  
  

  

  
  

  
  

  Kind regards

  JC
  

  
  

  
  

  Ideally, you should check for locks on the table in question where records are trying to access.

  AFAIK, you must check the v$ locked_object and find sessions.

  Hope this helps!

  Kind regards

  Hugues

• How to kill session im Apex?

  Hai...
  
  Scenario: im using browse file to download the file in sequencing shared... and then I kept a link "open file" under the "Browse file" to open the file I downloaded... for dat, I used the query
  "select max (id) of apex_application_files".
  
  face im problem: if I click on the "first time" link, I could open the file tat downloaded previously... If I close the session and log in nw I click the link I could open the file that I downloaded...
  
  Wat should I do nw... Please help me...
  
  
  
  David.
  
  Published by: David on November 4, 2008 22:50

  Hello

  If you use the parameter «Just...» ', this means that the value is calculated only once, because once it has been calculated, the value will not be zero. Like we didn't know that there are several elements with the same value of FILE name, this would have been sufficient that the ID would be the same, regardless of how many times we reloaded the page - so once, it is calculated, the value is stored in the session and we don't need to change.

  Now that you are trying to get the last file downloaded, you must pass the parameter 'always... "so that the value can be recalculated everytime the page loads to ensure that we always get the last ID value

  Andy