LabVIEW reinstall can't find daqmx vi

Similar Questions

• LabVIEW Linux can't find libstdc ++. so.5

  Hi all

  I just installed labview 8.5 for linux on Ubuntu 8.4 machine, but launches the sw, I get the message:

  . / labview: error while loading shared libraries: libstdc ++. so.5: cannot open shared object file: no such file or directory.

  I checked in/usr/lib and the most recent version of the libstdc ++. so.6 is present, so I don't understand why it is not possible to locate the library...

  Sorry, I'm pretty new in linux...

  Kind regards

  Edo

  Edo777 wrote:

  . / labview: error while loading shared libraries: libstdc ++. so.5: cannot open shared object file: no such file or directory.

  I checked in/usr/lib and the most recent version of the libstdc ++. so.6 is present, so I don't understand why it is not possible to locate the library...

  Try to make a link (symbolic) called libstdc ++. so.5 pointing to libstdc ++. so.6. Now, I don't know how the sudo thing in Ububububu, I use another distro, but I think it should look like this:

  sudo ln-s /usr/lib/libstdc++.so.6 /us/lib/libstdc++.so.5

  Note, that the library is a slightly newer version, I can't guarantee full compatibility to the rear. But it's worth a shot right?

  I hope that helps!

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• LabVIEW 8 do not find basic DAQmx live.

  My computer died and I got a new and loading of the NOR-DAQmx and Labview 8 worm 7.4 but my old programs, and even examples of Labview can not find basic VI modules as 'create virtual channel '.  It seems as Labview does not know where to look to find these basic elements.  I am running Windows XP Professional on your computer.

  Hi Gary.

  NOR-DAQmx 7.4 is not supported with LabVIEW 8.0. See the following knowledge base:

  NOR-DAQ and LabVIEW (for Windows) version compatibility

  http://digital.NI.com/public.nsf/allkb/B0D5630C0A50D5C6862578E800459248

  This is also mentioned in the readme file for the driver NOR-DAQmx 7.4:

  http://Joule.NI.com/nidu/CDs/view/p/ID/337/lang/da

  If you use a LabVIEW 8.0, you must install the driver NOR-DAQmx 8.7.1, which is the last driver that works with LabVIEW 8.0:

  http://Joule.NI.com/nidu/CDs/view/p/ID/965/lang/da

  Let me know if this solves the problem.

• Can't find the search box of google on the right side of the toolbar. He disappeared and I can't find out how to reinstall

  Have studied all the proposals help from firefox without success. Google search box on the right side of the toolbar of the web browser disappeared and can not figure out how to reinstall.

  You can't find it when you click on the Menu button top-right, then on 'Customize' below?

• I uninstalled firefox, then reinstalled. My computer keeps saying firefox is open and I can not find anywhere open

  I get a message that I have firefox running, but I can't find anywhere open on my computer. I tried to uninstall and restart the re - install and I still get the same message. I tried Control, Shift & Esc keys all at once and he did shows no firefox running. I don't know what else to try. Help, please

  Thank you all for your help and your suggestions. I have them all and nothing works, nothing worked. I closed my computer 24 hours, reinstalled and yes it worked. Once again thanks for all the suggestions that they were useful.

• Vision project of OR can not find the model after migrating to labview.

  Hello
  My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.

  
  

• How can I find out what products are included on my SN LabVIEW?

  I found a serial number of LabVIEW for Version 8.6 (3rd quarter 2008) in the virtual library of the former employee.  I also have the disks for all NI Developer Suite.  How can I find out what software products are covered by this serial number?

  Simply contact the Tech Support directly. Go to the 'Support' page in the menu bar of NOR. They can tell you. Or, you can install all the software, providing the serial number, try to turn it on and see if it works.

• TestStand can't find subVIs with Labview RTE

  I read the user manual on how config map if I want to call a VI with RTE labivew, but I'm still, puzzle on TestSatnd can not find the subVIs.

  Here's what I have:

  1. a development PC teststand with the right version of Labview RTE installed.

  2 another PC installed labview development system

  3. I created a VI in labview, PC using features of Report Builder. Of course, she calls a few vi.lib of labview subVIs.

  4 then I copy this VI to Teststand PC and try to load the sequence VI, he transforms a cannot find the subVIs.

  I wonder if Labview RTE includes all vi.lib, instr.lib. What should I do if I want to call this VI without installing the development system in the machine of teststand?

  
  

• Instrument IO Wizard can not find down Version LabVIEW

  Instrument IO Wizard only uses with LabVIEW last?

  I have install SP1 2011 LabVIEW and LabVIEW 2012 SP1, but I can't find Instrument IO Assistant in LabVIEW 2011 SP1.

  Is there a possible way to use the Instrument IO Assistant in the two Version of LabVIEW?

  I have install the LabVIEW with Device Driver 2013.08 2013, it seems that I could use Instrument IO Asisitant in both LabVIEW 2013 and 2012SP1, but still not found in LabVIEW 2011 SP1.

  I guess that maybe there's that something has changed since the Device Driver 2012.08.

  I hope that this maybe a little help for other people.

• can not find size_t during import a dll and calling a labview crash function

  Hello, experts

  I need to use FingerLakeInstrument DLL (see attachment) within Labview for talking to a CCD camera. It is built from microsoft visual studio C++

  I unzip FLI dll in my D:\proj\...\linfli-32 and import the dll from there. created a c:\FLIDBG.txt FLI dll must write the debug message on it if are called the FLISetDebugLevel() or others.

  During the import of the dll, the first thing I got is (IE size_t) could not be found. I installed the free version of microsoft visual studio C++

  but can not find 'typedef unsigned int size_t;

  in the end, I just added

  typedef unsigned int size_t;

  in the libfli.h. Having done this, I am able to import all the functions in Labview and have a library of user called libfli.

  However, as soon as I start to call a simple function in a test.vi, as FLIGetLibVersion (char * worm, size_t len), which consists of nothing else the library, the labview crash.

  I created a simple C test.exe who calls a lot of functions with no problems

  any suggstion?

  concerning

  Xiaofeng

  You don't have not shown us how the LabVIEW code looks like. The size_t setting refers to the length of the buffer, in that you spend. In this case you pass a string. So, presumably, you created a buffer zone in LabVIEW to a string of sufficient size, and set the parameter "len" to the length of this string. You also have to make sure you use the correct calling convention?

• Where can I find the sound drivers to reinstall Windows XP?

  Inadvertently, I uninstalled my Windows XP Realtek audio drivers.  Where can I find same on the Web to download and reinstall Microsoft site?

  The best would be to go to the manufactuer of the website of your pc and find the drivers there.

• I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?

  I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?

  Hello

  Contact the manufacturer of your laptop and see if they have a disc of recovery of your brand and the portable model.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• I need to reinstall XP but can't find my discs can someone help?

  I need to reinstall XP but can't find my records, it seems that there are a lot of things were removed from the system without knowing me my daughter tells me not do!

  How to order a replacement disk depends on how you obtained Windows.

  If you bought the retail of Windows:

  How to replace Microsoft software
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows came with the computer:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• I was told to uninstall and reinstall itunes. Where can I find to reinstall?

  I have Windows Xp home version.  My itunes would not work.  I couldn't connect to the store.  A note came that morning did not work.  The cure was to uninstall itunes and then reinstall it.  I've removed, now where can I find to reinstall?

  Hello

  Install Itunes form this link. Choose the version appropriate for your operating system.

  http://www.Apple.com/iTunes/download/