Lack of sequence

Similar Questions

• Re: lack of sequence Presets

  Hi, I downloaded the trial version of Premiere Pro CS6, but there seems to be many presets of sequence. Can someone enlighten me as to the situation in this respect?

  Thank you very much.

  This happens because some codecs must be loaded by the application separately. This doesn't normally requires any intervention of the user, but sometimes codecs not loaded initially.

  First try this:

  First Pro start. Create a new project and a new sequence. Close Premiere Pro. Turn it back on.

  The additional codecs and sequence presets appear now?

• How to find missing sequence No.

  I would get lack of sequence according to the series of data using sql.

  Here's my scenario-

  Table name: Policy_Location

  Policy_no	Location_no
  XX101	1
  XX101	2
  XX102	1
  XX102	3
  XX102	4
  XX110	1
  XX110	2
  XX110	3
  XX110	5
  XX211	1
  XX211	2
  XX211	3
  XX211	4
  XX211	6

  No, each strategy has several location numbers. Some policies are missing no., I need to know the policies that lack of sequence.

  According to the table above, the following policies have missing sequence-

  XX102 ran situation 2

  XX110's lack location no 4

  XX211 doesn't lack location 5

  XX101 is correct as no location has 1 & 2, not not missing.

  I have more than 10000 files with this scenario and I would only get numbers of policy which lacks sequence No.

  How could achieve using sql?

  Hello

  Here's one way:

  SELECT policy_no

  OF policy_location

  GROUP BY policy_no

  HAVING MAX (location_no) - MIN (location_no) >

  COUNT (DISTINCT location_no) - 1

  ;

  I hope that answers your question.

  If this isn't the case, point out where to where it's getting incorrect results (whether with Ramin example data), or some usable you sample data post.  Display the results you want and explain how to get good results in the places where the query above is wrong.

  If you modify the code at all, your postal code.

• missing sequence or codec presets

  I can't open the saved projects! Instead, when I opened a recorded Premiere Pro project I get the error message: "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence. »

  I'm under first CS6 on a MacBook Pro 10.7.4. I am not a subscriber to the creative cloud. I have not all previous versions installed first (IE. CS5, CS5.5).

  This message seems to be a fairly common problem among users of CS6. Here's a recent thread for users cloud creatives that are affected by this error message: http://forums.adobe.com/message/4496308 as others, I'm unable to open old projects, but I can still launch new projects. However, when you create a new project, my sequence settings seem to lack of presets:

  any ideas?

  If you encounter problems with missing codecs and Premiere Pro sequence presets, see this document for the solutions to this problem of activation:

  http://helpx.Adobe.com/Premiere-Pro/KB/features-presets-missing-Premiere-Pro.html

  This paper focuses on the following issues:

  -lack of sequence preset when you create a new sequence

  -Error again: "still will not launch mode of rolling non-redevance. The application must be serialized with a royalty bearing serial number. »

  -When you open a project in Premiere Pro: "error Adobe Premiere Pro: this project contained a sequence that could not be opened." No preview of the sequence is preset file or codec might be associated with this type of sequence. »

  -When you import images, the film is missing, audio or video.

  These failures are all because Premiere Pro and still use some codecs that require activation before they can be used. If the activation of these codecs failed, these codecs will be unavailable for use.

• LabVIEW USB-6366 sample 2 AI and encoder value triggered with X 1-Encoder (not with the sample clock) - need help, please

  Hello world

  After 10 years of LabVIEW experience I'm totally lost.

  It's my first project with DAQmx and I do not know how to handle.

  My configuration: Windows7. LabVIEW 2012 DevSuite; X Series USB-6366

  My goal: trigger value encoder and 2 inputs analog

  I would get a result for the value of the encoder and each of the two analog inputs for each change of the value of the encoder (not more! I do not want to sort a huge amount of data afterwards)

  I was able to configure it with the measurement and Automation Explorer, but have no idea how to do that in a LabVIEW configuration.

  Read all of the examples I could find the analog inputs and the encoder with SampleClock. This isn't what I'm looking for.

  I would be very happy if someone could guide me to my solution.

  I have attached the confiuration exported from the measurement and Automation Explorer.

  Thanks in advance, best regards,.

  Balze

  P.S.: Sorry I got COMPRESS the *.nce file, because NEITHER allows you to attach files *.nce

  You'll get there, but yes, the first exhibition to DAQmx is probably a little overwhelming.  A few other tips based on your screenshot (I'm on LV2010 & can't open the code).

  1. "allow buffer overwrites" is that a functional but description is not text.  It lies under the Read DAQmx property node and must be configured before starting the task.  Here is an excerpt:

  

  2. it is usually (but not always) an available timing system to be used for all HAVE channels in a task just by the material.  As a result, all channels to HAVE should be included in a single task.   You can do this easily in chaining your call 'DAQmx create Virtual Channel' twice the job output and input/output error.  Because the second call will receive a task refnum as input, it will configure the 2nd channel of AI to be part of the same task.

  (It is possible to specify just several channels in a single call, but separate calls gives you the ability to configure different setting on the scale or range of entry).

  3. the 'random', which IA task gave you the error is due to the lack of sequencing in your attempts to start tasks.  The question which is the fortunate success that happens to run first can (and does) vary from run to run.  By combining the two channels to HAVE in a single task, this problem will disappear, but you want to be sure that the tasks of the AI and the counter are started * before * any clock signals come to PFI8.

  4. "change detection" will be available for digital input assignments, not tasks of meter.  And it is also generally supported only for a digital port a-bit value.  Other ports then that support data acq clocked by the software on demand.  I guess one of these questions is the source of your error.

  On the boards of the M series that I used, change detection has been supported only on port 0 - I think that the same thing will be true for the X-series cards.  The following took place without error for me using a simulated X series device.  By selecting another port gave an error.

  

• colored vertical lines

  I'm using the latest version of windows with a brand new computer. I am trying to edit a graph model and I tried several that appear with colored vertical lines that won't disappear.

  It is the space reserved for the missing images. Look in your project for lack of sequence window and link. Files will probably be at the location where you downloaded the model.

• Font between family changes

  I had a designer who had all very for a doco, that I am working on a project. For the first reading, he warned the lack of sequences and lack of fonts. I did not want the images (guide) and after looking through the directories provided, found all the fonts. After installing all fonts AE always warned that it lacked the normal weight...? I checked the fonts and found a curiosity: dinreg.ttf was in the list I had installed but when I opened it in windows fonts Viewer it was obviously the regular weight but the title in the font Viewer was black. I opened one marked black and he was black. Then Middle open and it's also the back. I pushed and set the workspace makes it unique for each super and found that the output that the reg and Middleweight stream flick randomly between the correct font and a different font. I have scratched my head went a few and put police in selecting and changing from a distance and then back and it was ok. The next day, I just re rendered and they were ok.

  a supplementary question trying to prevent the generation of .xmp encode media files. I put to zero metadata, but it seems to ignore me.

  see you soon

  There is a known bug in cache that is triggered when you open a project that was once absent from fonts.

• After that the new installation on another machine, my copy under license of Adobe CS6 Encore "cannot run in serialized mode non-redevance."

  "The application should be serialized with a royalty bearing serial number.

  I did everything recommended in other threads on this topic-

  The CS all uninstalled, and used the Adobe cleaning tool - nothing helped.

  Just uninstalled and reinstalled, still nothing.

  And several combinations of these elements.

  Really need this work, as soon as POSSIBLE. We tried to contact Adobe by phone, chat and other means. They are to receive a public very, it seems. Can anyone offer another solution?

  It is a whole new editing suite running Windows 7 pro 32 GB of RAM and the [email protected] GHz.

  I think that it is the active link that addresses this:

  Characteristics and lack of sequence Presets | Adobe Premiere Pro CS6

  You have already installed any trial product of cloud?

• Need help with my preparation and suggestion

  I'm looking for new jobs of my existing role. All interviews are I get here is script based and I'm not able to answer most of them and thus be rejected in all cases. . In my work daily I am part of the team of DBA and daily work is to monitor the tablespace, Auditor, audit point mounting important space, for instance health check and backup of surveillance, it becomes boring, day after day, it's why I want to spend. But how to prepare for these typical scenarios based queries, I have both and unique and Dataguard setup in my laptop to play with, but I don't get any idea how to stimulate different scenario that can help me to crack interviews.
  
  Any idea or advice and suggestions will be highly appreciated and will be followed diligently. Thanks in advance.

  Hello

  I hope that... .in real time world... .they expects more from you than what you do now... as a DBA...

  in fact as a DBA, you will need to practice/play on your laptop computer or test environments... many things is to do...

  How to prepare to answer these scenario type of problem and their solutions

  convenient and... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... various scenarious... on your test computer...

  example: 1st thing is you need to learn oracle architecture and get good knowledge about this... book architecture expert oracle by thomas kyte...
  2:backup and recovery... .every interviewer waiting for information from you in this category... I hope... you need to practice various scenorious on the test computer.
  as some are below... take a full backup of your database before us all. R & D...
  1:datafile loss... system datafile losss... remove from the disk and try to restore/recover the PB... practice using backup bcakup online/offline...
  2 repeat corruption... size of newspaper for modifing do it again...
  (3) controfile corruption / lost
  DataGuard 4) standby log archive lack of sequence as gap next... WRT primary... pause connection N/W try this... practice scenario switch on / switch on scenarious... etc...
  point 5) practice in recovery time...
  Take 6) the practice of the above database hot backup like data lost/corruption...etc file...
  (7) unconsciously table drop... flashback technology...
  RMAN 8)... beauty of oracle... a lot is there to play the test using RMAN...
  Configuration... show all... it will give you a few parameters conf try to read each conf setting if its other than default configuration... If you... backup... restore... any file missing practice/play cmds RMAN... like missing file controfile file missing... etc...
  now, one day each interviewer ask a lot about RMAN...
  (9) make cloning using offline online backup/backup/RMAN

  http://gavinsoorma.com/2010/06/some-more-RMAN-recovery-scenarios/
  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmintro.htm
  http://docs.Oracle.com/CD/B19306_01/backup.102/b14191.PDF
  Once you got the good knowledge over things... then... the performance optimization analysis statspack report/awr...etc...

  my suggestion is to get the habit of Forum oracle fallow every day... If possible, each Hr... and try to read old messages in the form... problem to reproduce by your free the.experts and fallow solution and document those it will be useful for you made good things ahead for you... the best...

  Thank you
  DBC,
  SR DBA.

  Published by: dbc001 on March 10, 2013 10:36

• Hotlinks for first and After Effects CS4 with titles

  I created a Rolling title in Premiere Pro CS4.  I would like to create a dynamic link to get back the title in After Effects CS4 to add effects that appear in the first.  I watched a few video tutorials on Dynamic Link and read the documentation and tried a variety of permutations but can't seem to get there.

  Also saw something in these forums about the problems using dynamic links with titles (as opposed to regular pliers?)

  And something about the Premiere and After Effects projects being saved together? in the same folder - is that correct?

  So, could someone explain to me if this is possible and the right way to do it?

  Thank you

  First titles are usually not supported æ as separate entities, since they do not exist as such. Only the titles added to a timeline of the Organization will be present themselves, but can renderings and merged with the background. So, essentially, that it is not the best of ideas to create even titles in first in such a scenario - you can only end up seeing a ton of solids in the placeholder or a completely black canvas. If this is the case, make the titles to separate TIFF or PSD with adequate transparency. And Yes, the projects must be saved in the same location relative to avoid lack of sequences and make mistakes...

  Mylenium

• CC 2015,3 gel sequence multicam and lack of codecs

  Updated to 2015.3 and am now encounter problems that are maintain a sales lead time!

  -The Multicam nested sequence does not work more.  I have a multi-sequence 3 cam which was working fine before the update and now when the sequence passes to a new camera angle the video stream freezes for a minute or 2 and then continues to play smoothly.  Very annoying and wait a long time to unlock.   After it thaws it will play every angle smoothly as long as I never pause the video.

  -Lack of codecs! MXF are most recognized which is the format of one of my 3 cameras.   I tried too out to mpeg2-bluray and that no longer exists?  I tried bluray h.264 and the sound was not synchronized with the video.

  Specifications for computer-

  Windows 10

  6 core i7 processor

  16 GB of ram

  Nvidea 7 series graphics card (don't remember the exact model)!

  A small test of mine project was happening as you describe. (Multi-came reactivity and crappy).

  Try disabling "Intel h.264 decoding acceleration.

  It is enabled by default. Turn it off (and then save / close / open body) makes as sensitive as 2015.2.

• Sequence created in anon PL/SQL, lack of initial value

  If I create a sequence in an anonymous PL/SQL block, with immediate execution, and then perform a select nextval from this sequence outside of the block, its initial value is missing.

  Easily reproducible here:

  create table tab_a (col_a number 4 not null);

  Start
  run immediately ' create the sequence seq_a with increment 47 1';
  end;
  /

  insert into tab_a seq_a.nextval selection of double;

  Select * from tab_a;

  This is a very simplified representation of the circumstance in which I found myself, but it reproduces the effect I see.

  If I drop the sequence to truncate the table and run the statements (except the first) once again, it works as expected. If I delete the table and rerun all statements, she again returns the wrong answer.

  I don't need a workaround solution, the issue has been addressed a long time ago, but I would like to know WHY this happens. from 47 of the sequence can be any number, it is there just to show the question when 48 is inserted into the table. The latter could be in any table and can be on any table rather than double.

  Oracle EE 11.2.0.1.0 on node OE Linux, RAC and single.

  TIA.

  It could be like, in oracle 11.2 (GR 11, 2) there is a new feature 'deferred_segment_creation' = true (maybe in your case). Then sequence is get initialized before inserting the 1 record to the table because of the creation of segment.

  Change both the default value FALSE check after that. It can solve your case!

  Reference:--

  http://www.dbsnaps.com/Oracle/Oracle-deferred-segment-creation/

  It has already been notified in the previous discussions.

  Thank you!

• Oracle 10.2 g-lack of number sequences

  We have identified some numbers were dropped generated by Oracle 10.2 g sequence features. Sequences were ongoing for most of the time, however, we witness a few gaps that occur randomly at times. This has happened in three of our tables. For an example that has only about 80 000 entries between sequences of ID from 800 000 to 900,000. Sequence jumped no permanently several times.
  
  Is this a known problem or is there another way, that this can happen?
  
  Code sequence:
  
  create sequences CASE_SEQ
  MinValue 1
  MaxValue 999999999999999999999999999
  Start with 966251
  Increment 1
  NoCache;
  
  Published by: user9276811 on April 4, 2011 02:02

  Look at the configuration of the cache of your sequences.

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:369390500346406705

• Lack of Bowse Sequence Editor

  One of my users requested a sequence to browse, but I can't find the sequence editor to browse. Someone else has had a similar problem in 2004 and addressed the situation when she ran an update.
  
  I checked the updates, but none was available, so that won't work for me. I tried to add a tool, but not able to find the .exe file. Any suggestions? Thank you. Charles Arnold

  Hi Charles

  I think Colum means you must click on the item in Tools menu at the top of the screen. Not the tools at the bottom of the Explorer of RoboHelp pane tab.

  See you soon... Rick

• S10 Boot Sequence

  I just bought an S10 with double SATA 250 GB drives and Vista Business 64. Apart from travel account that my collection of 25 years of the old DOS utilities no longer work (due to lack of Vista/Intel), I noticed that only 250 GB of total hard disk space has been reported. The second disc does not appear to exist at all.

  I have now correctly partitioned disk 2 and in format FAT and FAT32 and these volumes appeared as valid in Vista 64, but what I want to do is set up the drive with another OS (maybe XP or 2 K, maybe Linux or even BACK/Win98).

  I had no trouble installing an experimental BACK/Win98 on the second disc, but I don't see how to boot from that disk. If I boot from a suitable CD, Player 2 is presented as "C:", "D:", etc. and I can run in the BACK, but I can't boot from the hard disk directly.

  So here's the question:

  HOW CAN I INCLUDE MY SECOND SATA DRIVE IN THE POST F12 BOOT SEQUENCE?

  Any help (rather than derision to my secondary OS choices :-)) would be greatly appreciated!

  Thanks in advance,

  Brian