LAN/graphics drivers required for Satellite S1400-103
I tried to find the LAN drivers and graphics XP for laptop Toshiba Satellite S1400-103, but never had a chance. Can someone point me in the right direction? See you soon! :)
Have you visited the Toshiba driver page?
Toshiba released a website with whole Toshiba drivers for each Toshiba laptop. But we must choose the right options:
Laptop Satellite Satellite 14xx Satellite 1400-103 Windows XP
If you use this you will find many drivers for this camera
There was vista home installed on Toshiba satellite P200-13z (PSPB0). I made mistake by installing vista first hard disk half and then installed xp pro on the rest of the hard drive. Now my phone won't show me dual boot menu
On my C - Vista drive
On my drive D - XP
When I start my laptop, it just goes straight path to XP, so I'm not able to choose vista on my laptop even, it's there.
XP took the other driver except them Chicony usb 2.0 cam, PCI Device, video controller and the network driver
I looked on the download site of Toshiba and only able to find Realtek RTL8139/810 x player Lan, which I installed it, but still, my wireless network does not.
Now I don't know what network driver I required to connect to internet through wireless (Wi - Fi) for my XP operating system
ADV me please this as other drivers I need to download and the place where, so I can connect to internet with wifi.
> When I start my laptop, it just goes straight path to XP, so I'm not able to choose vista on my laptop even, it's there.
I had the same problem after installing Win XP on my laptop.
The fact is that Win XP destroyed the Vista Boot Manager and so you can not choose the Vista operating system.
But you can fix it using the MS Vista disc (not recovery disc). Simply start the Vista disc and choose the repair option.
This will solve this problem.
But after that you will not be able to start Win XP.
The solution; go to Vista, install freetool called EasyBCD and include the Win XP operating system and partition for the Vista Boot Manager.
That helped to me.
Regarding the WiFi network:
The laptop uses the ATHEROS 802. 11B / G WLan card.
See this page:
Hope I could help you
Hello, I hope I'm in the right place as TOSHIBA is bigger than I thought. I'm trying to update my NVIDIA driver on my 286 P100, I went to the NVIDIA site and they redirect me to Toshiba USA and I could not find them. So I came to Toshiba UK and it's more complicated that I first imagined. Could someone please give me maybe a url that I can go to directly. Thank you very much for your time,
I produced future Satellite P200 and last game I played was Call of Duty 4. What is also a game or already old modern?
In any case, I can understand why you write this but on the other side your sound quite illogical comment to me. You know very well that almost every day we have new and modern games on the market, and these games have more and higher hardware requirements. With short words: for modern games, you need modern equipment.
Why you compare with powerful desktop computers with extremely powerful with designed cooling systems, special one side graphics cards, graphics processor integrated notebook? Can Hey Buddy, you really expect the same performance?
Where is the limit for you? Perhaps at this moment when the graphics card died? And you can cry and say: Toshiba didn't do anything to protect my equipment.
Yes you write about the mobile game but this portable game cannot offer more than a reasonable level of performance.
Sorry Michael, but I think your comment is absolutely unjustified and certainly hypercritical.
I need drivers for LAN, PCI and its for satellite A105-s4074.
I put t know what operating system you are using, but you should find the drivers for this laptop on the page of the Toshiba driver we.
Satellite A105-s4074 was designed for the American market, and therefore, you should use this page:
I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart. I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error. Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error. I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work. I am at a loss to try to seek and find a solution.
Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?
As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.
Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.
It seems that there is no XP drivers available for Satellite L40-139.
Is could someone please tell me where I can download drivers for the following devices:
Controller - ACPI!
-Some chipset drivers (?) (Subsystem PCI or something)
I would really appreciate any help!
There are no drivers of toshiba for the moment, but you can try to use the generic drivers from the manufacturers of the equipment
(for example if the soundhardware is a realtek sound card download then www.realtek.com drivers and so on..) and operate the machine with these drivers.
Here is a link that might help you:
I hope that you can find the drivers you need...
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu
[my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.
Please let me know how it goes.
You can say thanks for trying to help by clicking on the Thumbs Up below! .
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
Access the manufacturer's Web site and search for updated driver
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.
1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.
2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I bought my Aspire E5 - 511G a few days.
I have successfully installed Windows 7 Professional (x 64).
I installed all the drivers downloaded form the support also section successfully.
The problem is that about every 5 ~ 10 minutes, I get the following message:
"display driver intel graphics drivers hd for windows 8 (r) stopped responding and has recovered".
This message itself is not a problem. The problem is that during Skype video calls after receiving this message, I see more or my own video and video of the callee.
Not only that, restart the call does not correct the problem.
The only solution is to restart Skype, but it does not work every time.
I had a similar problem with youtube videos, but I solved the problem by setting NVIDIA as graphics processor preferred for the browser application, but I have no option for Skype.
Can someone please? It is very very annoying.
Looks like that I managed to solve the problem.
Firstly, the link you provided was worng. The appropriate driver URL is https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329&lang=eng
As you can see it is the same driver for windows 7/8/8.1-64-bit.
Second, when I download and install it I get a message that my driver is up to date already (actuall I had other issues but that's another story)
In a Word, to install it, I did the following:
1 downloaded the zip of the "win64_153330.zip" driver version
2 extract the zip file to a folder.
3. in the windows Device Manager, I uninstalled the graphics driver intel existing HD. So my screen stopped working (which is expected).
4 restart the laptop, windows loaded with the default VGA driver.
5. Device Manager open, the crux of the VGA, click right and choose driver update driver.
6. in the Update Driver Wizard I chose the location of already extracted files (step 2).
7 installing the driver successfully passed and asked windows to restart.
Now, after the reboot, I have a Skype has appealed for about 20 minutes and did not get the pilot error.
Also played some videos youtube - new error now.
The current version of the driver (of work) is 10.18.10.3958
The version of the driver provided by Acer's 10.18.10.3621
I'll post an update a few days more later how things happen.
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Have you tried to update the drivers as suggested by Basith M?
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
ThanxHi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
I get this error from a specialized device that uses a usb/network card connection built-in. It is with windows 7 Home premium. Now I know that the source of the driver. It is the latest driver and labeled for use with Vista. I need to override this security check, so I can use this equipment. It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver. I downloaded from many sites without modification. This equipment worked well under Vista.
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
I found the answer by looking for other sites, it's probably here somewhere as well. Restart the computer. During restart, press "F8". Select Disable Driver Signature Enforcement in the start menu. This fixed the problem of driver in my case.
Maybe you are looking for
HelloI have a 6 month laptop Satellite Pro S300-100 and running Vista 32 bit. He got 4 USB slots, 1 handset that works on the left side and 3 USB2 connectors right side and these 3 suddenly stopped working. I tried different connections, memory stick
Hello I have problems of USB power since the upgrade my BIOS to 5.2 days on receipt of an email from Toshiba, advise the upgrade I got a 100 - 200 PSAA8E Windows XP Media Edition since the upgrade of the BIOS to 5.20 I get message error power but onl
When I try to retrieve the official trick I get the following error message: "There are a problem by retrieving the Outphasing 69671 document." If it cannot be fixed, please publish the content in this forum. It applies to what to do about 3000-N100
From these, my computer hangs when it tries to run Chkdsk (since I used windows, it crashed trying to use not start repair) ive tried a number of things, including: using command prompt instead, using an ERD win7, winfixit program and using the comma
I tried to put USER_AGENT to the browser like this field String UserAgent = "BlackBerry9530/220.127.116.11 profile/MIDP-2. 0 configuration/CLDC-1. 1 /-1 VendorID; _renderingSession.getRenderingOptions () .setProperty (RenderingOptions.CORE_OPTIONS_GUID, Re