Large black spot on the page and pasteboard

I use CS3, InDesign worm. 5

I have 100 pages (type, a book page 440), with a large, 1 x 3, solid black spot (a double sequence) that extends from the top of the chessboard of paste into the document of 1.5 inches on a single page. Sometimes it disappears, sometimes it reappears. I exported the file to PDF (for printing high quality). It was not visible in the PDF, but it printed (printing of digital book CreateSpace).

The task cannot be selected, moved, etc.

The file contains four layers. The task is primarily associated with a single layer. However, when I turn this layer or all the layers off the coast, only the part of the task inside the text box disappears. The part which exceeds the frame of text on the page and the remains of cardboard.

The blemmish appeared during a crisis of sneezing (allergies) while I was working on the document. I touched or that you clicked on something, but I have no idea what.

  • I moved out of the page, the text block, and a new time, not linked, given. Most of the task moves with the original text block (everything that was inside the frame and the part on the outside). I made a new image and the task has returned - now in two locations: in full size on the page, and most of it on the block of text on the pasteboard.
  • I deleted the page, created a new page and created a new block of text. As I entered the new text, the task has reappeared.
  • I exported the File Interchange format. The task remained.
  • I deleted the default settings of InDesign and saved data files. The task remained.

I can cover it with a full framework of white: However, I do not know if it will work in fact when the book is printed. And if this is the case, I can't delete the part that covers the text.

Walton

waltonm wrote:

I've linked a copy of page problem here is a postal fold of the indd file packed; Therefore, the fonts are included.

Walton.

I exported the IDML file and also as RTF. Opening the IDML retained the task.

Placing the RTF into one new file has also retained the task; even if the fonts were all gone, the glyphs appeared in applied fonts. A strange thing is that the police of DickChamberlainsDeathF na not show coloring and missing fonts in the menu drop-down police in Control Panel, there is no brackets around his name (parentheses indicate missing fonts).

Someone at - he a clue about this strangeness?

I exported the text file. The form disappeared when the text file has been placed in a new document.

Then, I reapplied the fonts for the text - named police has been applied to all paragraphs in the police force. No character.

The default size is 12pt. I've selected all the text in the frame and increased the font size to 15pt and BINGO! It's BAAACK! He remained as I unstapled each action step by step.

I suspect that the task is triggered by a character in one of the fonts. It does not go away when the fonts are changed to fonts known to normal. If these fonts are not major fonts foundries creations, or if they have been changed by a scientist crazy fonts, the problem is probably a calculation error in the view of the police.

If you want to really find the source of the problem, I would suggest to start with a new file, set the default to a known a type font, course new samples of text for a set of glyphs, copy and paste the glyph to make enough for your samples, and then save this file, and then save it under a new name. One, apply a suspicious police to a set of glyphs. Save under a new name that indicates the applied font.

Open the first saved file, save it with the name of the second font that you want to test. Apply this font on the second set of glyphs. Save again.

Browse through this routine until you have a set of files which have all games of glyphs, but that one policy applied to each file. If the task has not appeared, start back in the first file with a font applied. Select the text with the applied font and change the size from 15pt point. If that does not cause the problem, save the file as a new file with 15pt in name.

Repeat this test for all files. If the task appears, you will have an idea of what font causes.

If the task has not appeared, start over with the first file who first applied at 15 PT fonts, save it under a new name. Select the second group of glyphs and apply the second font. Record. If no stain, increase the font size of the second group of glyphs to 15pt. If no spot, save and repeat with all other files, apply the n - th police to the n-th glyph group. Save new names. Change font at 15 PT etc.

If still no spot, start over with the first file. Register a new name. Apply every nth font in each group of the n - th glyph, in this one file. If this does not display imperfections, try the same strategy with the remaining files.

HTH

Kind regards

Peter

_______________________

Peter gold

Know-how ProServices

Tags: InDesign

Similar Questions

  • How can I fix black spots on the camera in 9.3.5 iOS?

    How can I fix black spots on the camera in my iPhone 6 Plus? Please help me.

    You see the same locations if you take a picture out in the open?

    It's more like flares of the lens, because of the light coming from one side of the room and hit the lens at an angle. If so, it is an optical phenomenon and cannot be resolved.

  • My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. True or

    My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. Is this true? Thank you

    Sorry, but at least the screen needs to be replaced. Do you have the battery exchanged in the past?

    Visit an Apple Retail Store or an authorized Apple Apple Service Provider next to your place to achieve this.

    You can also contact the Apple Support to send it.

    Find an Apple authorized service provider

    Apple iPhone - contact Support - support

    Pricing of the service repair screen

    Repair and replacement costs depend on your iPhone and your AppleCare products cover model. Apple runs a diagnostic test to determine if your iPhone has suffered additional damage. If she has, or if she needs more repairs, you may have to pay out-of-warranty service. Accidental damage is not covered by the Apple one-year limited warranty.

    Model Screen repair cost
    iPhone 6 $109
    iPhone iPhone 6s 6 Plus, iPhone 5 s, iPhone 5, iPhone 5 $129
    iPhone 6 sec more $149

    In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during testing. Pricing and terms vary for the service by an Apple authorized service provider.

    copied from answer Service Center - iPhone

  • When you read an article on the web I have a circle with the 4 arrows to pop up on the page and it will be auto-faites scroll down?

    When you read an article on the web I have a circle with the 4 arrows to pop up on the page and it will be auto-faites scroll down?

    original title: auto-scroll

    When you read an article on the web I have a circle with the 4 arrows to pop up on the page and it will be auto-faites scroll down?

    ===================================
    I get that if I press the wheel too hard.

    It allows to scroll just by moving the slider
    instead of turning the scroll wheel. And... If the
    Window is larger than the screen, you...
    can scroll to the left and right also.

  • HP CP4525DN print black all over the Page

    Hello, I have a HP CP4525 that prints black all over the page with the exception where there are printed words.  I reinstalled the fuser unit and tried to swap black ink.  It's a brand new printer from the box.  I have attached a picture of one of the printing as kind of hard to explain what the question.

    Any help would be appreciated.

    Edit - added an another attachment with the print quality test pages

    Has started sharing a printer of spare parts in another office.  Turns out be the formatter Board.

    Thank you.

  • Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages and some of them are constantly a quantity apparently endless on top of e

    Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?

    It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.

  • Twitter: Your account may not perform this action. Please, refresh the page and try again.

    Since the update to Firefox 41.0.2 I couldn't use Twitter.com. When I try to tweet, favorite, or retweet the following error occurs. Your account may be able to perform this action. Please, refresh the page and try again. There are a couple of other users who have the same problem, but it was tinkered with Mozilla and the other pending.

    It started with the update to 41.0.2 and twitter works in all other browsers, but not Mozilla.

    Here's this other thread with the DIY: Impossible of Retweet, tweet or articles favorite on Twitter, even when I refresh the page.

    I think there must be a setting or a question Add on. Your extensions look pretty standard, so I'm leaning towards a parameter of the problem. You could test as follows:

    By default, Windows hides the .js extension. To make sure that the following steps work, you have to disable this feature, at least temporarily. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions

    Open the settings folder (AKA Firefox profile) current Firefox help

    • button "3-bar" menu > "?" button > troubleshooting information
    • (menu bar) Help > troubleshooting information
    • type or paste everything: in the address bar and press Enter

    In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

    Leave this window open, switch back to Firefox and output, either:

    • "3-bar" menu button > button "power".
    • (menu bar) File > Exit

    Pause while Firefox finishing its cleanup, then rename prefs.js to something like prefs.old.

    Launch Firefox back up again and it must use the default settings (for example, integrated home page). If you need to restore your previous session windows and tabs, go ahead and select restore previous Session from the history menu.

    Twitter works best? If so, we could try to understand the precise adjustment at fault or you could rebuild your settings. Or you can undo the change by renaming the new prefs.js to prefs.txt and rename prefs.old back to prefs.js (with Firefox closed, as you did before) and understand it through a little trial and error.

  • How can I get high back bar that shows the description of the page and the Firefox logo?

    The bar at the top of Firefox that appears on each program above the menu bar disappeared.

    As in, the bit that normally displays the title of the page and the firefox logo. Now, it seems impossible to distinguish from Chrome. I'm not using the full screen.

    When I click and drag firefox to the top of my screen to snap to the size of my screen, firefox logo and title are indicated for now until it snaps, but as soon as he snaps, he went (and generically everywhere).

    I want to be able to see what browser I'm in a glance and see the title of the page, I'm on. How can I solve this?

    You can find the button to turn on the title bar of window at the bottom left of the window customize.

    • Firefox 3-bar menu button > customize > title bar

  • How to return to my original blog design when after I updated firefox my top border changed to only go to half way through the page and a line now headed down in the middle of my blog? On other computers, not just mine.

    I would like to just my blog back to its original format without line in the middle of the page and the top edge across the entire page and not only at half way. This occurred immediately after I've upgraded to Firefox 6. The format of my blog is normal on the other computers, but not normal on my computer. Thank you.

    Hello Cor - el, Yes, it's my site. When I looked at my site on another computer this computer used Internet Explorer for the web, so I thought it was normal. Thank you for the information on 2/26. I have passed your info to my friend who will try to solve the problem. I'll let you know when she solved it. BMB

  • Dialog box confirm boxes are too wide for the page and disappear on the right side in the sites we develop. It's new. How to fix?

    In Windows and Mac confirmation dialog boxes are open now too wide. It extends on the right side of the page and therefore mask the user action buttons. The site has no horizontal scroll bar.

    When you resize the browser window, the dialog box has scaled to the correct size. As website developers, how can we prevent what happens?

    May be this bug:

    • bug 686469 - tab-modal alert can extend beyond the browser window

    (please do not comment in bug reports)

  • Tecra M4 - black spots behind the display Tablet cover

    After an intense action of cleaning every month, I recognized a few black dots on the back side of the front glass of the tablet. I did some checking of finger on the screen to see if it's a pixel error. I can say with any doubt that he is not a pixel error.

    After a Google search I found people describing the same. It is assumed that it is the result of fan heavy work.

    Y at - it no support out there that can help me solve this problem?

    Hello

    I put t really understand the link between the black dots on the screen and the heavy work module cooling.
    For me this internet s nonsense provides a lot of information useful but also very stupid gossips, myths and stories

    Always it is that you have a few black pixels on the TFT display and it sounds like a hardware problem.
    So in this case, there is only one solution; This part is replaced or repaired I guess, it should be replaced

    For all replacements, you will need to contact the ASP in your country. Ask them to help and managing others.

    Good bye

  • Why the Pages and Numbers do not use the default printer?

    Recently, I added a second printer to my home network and selected as the default printer. But when I try to print, the correct printer is selected in the dialog box print only part of the time and apparently depends on which application to print from. I believe that Safari, Mail, Contacts and calendar properly use the default printer, then the Pages and Numbers and instead do not the old printer unless I have change the selection in the dialog box impression every time I print.

    How can I get Pages and Numbers to correctly use the right default printer?

    The problem that is happening on my machine (OS X El Capitan 10.11.2, 5.6.1 Pages and numbers 3.6.1) and my wife (running Maverick 10.7.5, Pages ' 08 3.0.3 and Numbers ' 08 1.0.3) and has persisted through a reboot. The old printer is a HP OfficeJet Pro 8600, accessible via WiFi. The new printer is a Brother MFC-7340 connected by USB to a Time Capsule that is accessible via WiFi.

    In the print... dialog you select

    View the Presets...

    in the menu presets. In the sheet drops down, uncheck the box marked

    Reset the Menu Presets for "Default settings" after printing

    Click OK. Then select

    Last settings used

    or a custom preset that you created in the menu.

  • I have black borders on the top and the bottom of my desktop screen andonline screen. How can I get rid of this?

    I have black borders on the top and the bottom of my desktop screen andonline screen. How can I get rid of this?

    Hi Harry,.

    Thanks for posting in the Microsoft community.

    I understand that the screen on your computer displays a dark border on the top and the bottom of the screen.

    There is an article in the knowledge base that provides methods to solve this kind of issue. Check out the link and follow the steps.

    Troubleshoot monitor and video card

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Let us know if you need more assistance.

  • Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

    Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

    Try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    It is the instance of Vista installation.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

    Adjust settings, manage user accounts.

    Try the Forum above to repost, if necessary.

    See you soon.

    Mick Murphy - Microsoft partner

  • Remove the big black bar at the top and bottom of Office

    original title: my desktop image now has a big black bar at the top and bottom. How can I get rid of this?

    The image filled my monitor yesterday. Today, I have a big black bar at the top and bottom. How can I get rid of this?

    1. Right-click on your desktop, choose Customize.
    2. At the bottom, click background.
    3. Finally, click on the Position of the image and choose Stretch or complete, what you prefer.
    4. Click on save changes.
    If this isn't the cause, you could also do that you use the full resolution of your monitor.
    1. Right-click on your desktop, choose the resolution of the screen.
    2. Make sure that you use the recommended resolution.

Maybe you are looking for