last line of textarea

Similar Questions

• View the last line of a JTextArea wrapped in a get

  I use a JTextArea to permanently display the generated text of asynchronously and sporadically. The JTextArea is encapsulated in a get. When new text is added to the JTextArea I need to always show the last line of text. The only solution I've found so far is to find the length in characters of the text and before the JTextArea #setCaretPosition (). I can't believe that this is preferable, because to find the character length means first to convert the content of the JTextArea in chain!
  
  Is there a better way to do this?

  Use the javax.swing.text.Utilities class. Method
  mutable public static int getRowStart (JTextComponent c, int OFFS)

  You can pass the length of the document and your JTextArea.

  Or just use textArea.setCaretPosition (textArea.getDocument () .getLength ())

• OfficeJet 6500 intermittently does not print half of the last line in the lower doc

  Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

  Try that and see if it helps the question:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

• multicolumn ListBox scroll down to the last line - with AutoSize on

  Hello world:

  I have a question about scroll to the last row of a listbox multicolumn with a small twist: automatic resizing line Heght is on.

  I checked this point - listbox multicolumn - scroll down to the last element - but if one or several lines are automatically resized to have more than one line, then the actual number of visible lines differs from the numrows and the calculation ends up incorrect.

  Has anyone found how to do this?  If there is a property only to find the heght of a line in lines...

  Thank you!

  I developed what I think it's a solution to the test.  It is based on adding the line heights, in pixels, of the last row back, until it is greater or equal at the height of the content area of Listbox MC, also in pixels.  Add-on for the upper left row to display because the last line displayed can be split.  Thus, there is always an empty line at the bottom (which is the only way to ensure that the last message is completely visible).  Because of the way that LabVIEW scrolls lined with several lines, there may be several blank lines on the bottom.

• Set a Date and hour - 5 week months does not show last line

  Hi all

  I work with Labview 9.0 (32-bit) on Windows 7 with a system of 125% font size. When I opened the set the time and Date dialog box, months with five lines of days cause the window to cut the last line in two. Is it possible to fix this? I tried messing around with picktime.vi in \resource\dialog\ [LabVIEW], but it won't change the dialog box (and I said that it is not supposed to?).

  I can't upgrade to a new version (my only recently developed business to upgrade to Labview 2009 and wants to keep for reasons of stability) and I can not change the system font size because 125% is the norm. Someone suggested to change the font sizes in the environment is smaller, but I am not either - I need to the font size.

  I intercepted the Browse on a control path before, this is very similar.  Trap the mouse down? events that lands in the time picker button and call your VI changed instead of control to handle.  The simple limits I think works for the Browse button in the location by default on the right side of the control (any where on the right side in fact).  If you move it to the left or lower or higher, you may need to adjust the calculation.  These blue properties are script in case you're wondering.

  

• Last line of the text Telnet cups

  It's on a Vista computer. When the user is on the last line in the window, more half of the fonts character is cut off. There is no way to scroll down lower to see the line of text.

  Hi AirForce9797,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Windows Vista Networking forum.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• last line of text does not print

  OS HP3050A J611 W7 series

  When you print a sheet of labels, the last line of the text is missing. I used the same model on the last (XP) laptop and printer with no problems. I tried to change the margins, but without success - this feature sounds very different in W7. Any help would be appreciated.

  Hi jam1945,

  What applications do you use to print the labels?

  What happens if you print from Wordpad?

• SQLite Select * from table1 - cannot see last line

  Hello

  I did some testing with SQLite component on the Simulator and ran into a problem. When I try to retrieve the data from the database (storage works great... open the db to an observer and data file has been stored properly), I can't get the last line of the query. I have something in the sense of the following:

  try {
        Statement _statement = m_db.createStatement("SELECT * FROM TABLE1");
        _statement.prepare();
        _statement.execute();
        Cursor _cursor = _statement.getCursor();
        if (_cursor != null) {
  
          while (_cursor.next()){
              Row _row = (Row)_cursor.getRow();
              // Read row. For example:
              int idx1 = _row.getColumnIndex("id");
              int idx2 = _row.getColumnIndex("name");
  
              String _id           = _row.getString(idx1);
              String _name         = _row.getString(idx2);
          }
        }
        _statement.close();
        _cursor.close();
      } catch (Throwable e) {
        Dialog.alert("unable to get row data");
      }
  

  The first problem is that _cursor.next does not succeed, and the loop is not executed. If I change the code to force it to enter the loop (ie. cursor.first and run the .getPixel etc... in any case), I always get the LAST row, even when I use the position (1, 2, 3, 4... etc) function. It's pretty boring. I develop this 5.0 and testing with 9700 Simulator. Any ideas why I would see only the last row?

  Why the next file in the thropugh code above, I can't retrieve a row in the database?

  Note I tried dogin cursor.first ()... . Run the .GetPixel and the. next(), don't always gets me the line after line and the other always returns false. I do a select empty in the database, all lines should be there (checked the structure of data in another program... it is fine), no idea why it isn't here?

  Thanks in advance.

  Figured this out, the _statement.execute (); should not be there.

• TextStyle.lineHeight on a label causes the last line of text to be cut?

  I have the following QML (hosted in a TabbedPane, so who could possibly make a difference):

  {Of container
  {Label
  text: "Lorem ipsum dolor sit amet, adipiscing elit computer."
  Multiline: true
  textStyle.fontSize: FontSize.XLarge
  textStyle.lineHeight: 0.8
  textStyle.color: Color.Black
  }
  }

  Setting the property textStyle.lineHeight to something less than 1.0 is what I expect, except that the last line of the text of the label is cut down. Any ideas how to get around this problem, or if I do something wrong?

  Screenshot of the results, a device Dev Alpha B running OS 10.0.9.348. Results look the same on the simulator of 10.1.

  

  It looks like a bug. As a solution, try adding "\n" at the end of the text.

• DESKJET 1515 DOES NOT PRINT THE LAST LINE WHEN COPYING

  I RECENTLY BOUGHT A DESKJET PRINTER 1515 AND WHEN I TRY TO COPY THE PRINTER, IT WILL NOT PRINT THE LAST LINE. IS THIS A FIRMWARE ISSUE?

  Hi, the 1515 margins Top: 1.5 mm; Left: 3.2 mm; Downstairs: 14.5 mm; Right: 3.2 mm.

  If you original contains data below the 14.5 mm then that would explain your question of copy.

• SQL to bring the last line and the just previous row in the table

  Hi all

  I have a table of orders, where a serial number can be booked with different number several times over several days.

  Requirement is to bring the last order (based on the date of creation) number associated with this serial number and just previous order number and data in the format below.

  Last order number

  Serial number

  Reservation location

  No booking

  Previous order number

  Serial number

  Reservation location

  No booking

  It is essentially to generate the report that a reserved serial number with how many times with different orders and report must contain details of order two in a line.

  Kind regards

  You asked for the last line, and you have not provided data of the example or the expected results, so you get what you asked for.

  You may be looking for data to be partitioned on another value, for example

  SQL > ed
  A written file afiedt.buf

  1. Select deptno, ename, empno, mgr, hiredate, prev_empno, prev_ename, prev_mgr, prev_hiredate
  2 starting at)
  3. Select deptno, ename, empno, mgr, hiredate
  lag (empno) 4, over (partition by deptno arrested by hiredate) as prev_empno
  lag (ename) 5, over (partition by deptno arrested by hiredate) as prev_ename
  lag (mgr) 6, over (partition by deptno arrested by hiredate) as prev_mgr
  lag (hiredate) 7, over (partition by deptno arrested by hiredate) as prev_hiredate
  8, case when hiredate = max (hiredate) on (deptno partition) then 1 0 otherwise fine as max_hiredate
  9 of PEM
  10       )
  11 * where max_hiredate = 1
  12.

  DEPTNO EMPNO, ENAME MGR HIREDATE PREV_EMPNO PREV_ENAME PREV_MGR PREV_HIRED
  ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
  10 7934 MILLER 23/01/1982 7782, 7839 KING 17/11/1981
  20 7876 ADAMS 7788 23/05/1987 7788 SCOTT 7566 04/19/1987
  30 7900 JAMES 7698 03/12/1981 7654 MARTIN 7698 28/09/1981

  who is the last disc, by Department, as well as the previous within the same Department.

• C6280 sometimes cut the last line of text

  I was not able to understand this one... I do not get a margin in Word printing error, but the last line of text, even in the middle of a page the low 80% of it has failed.  It's as if the printer thinks it has reached a limit of impression, but this is no the case near the edge of the paper.  It is not just a problem with Word.  I was using Memorex, software for labeling this morning, and it's the same thing.  In this case, the omission was near the edge of the CD label stamped, but it was far from the edge of the paper.  Any help with this would be appreciated.

  It worked for me:

  1. go into your printers folder, right click on the connected network printer that you experience the problem with and select "Properties".

  2. when the Properties window opens, click the "Ports" tab

  3. at the bottom of the tab window Ports is a check box "Enable bidirectional support", uncheck the box and click 'OK '.

  now print something where you have already encountered the problem.   I think this might work for some users.

• Tabular forms – test whether cursor/focus in the last line (Apex 5.0)

  I would like to optimize my sub fast data entry form. I have already added dynamic actions for Excel style and down navigation with up and down keys and also auto-insert new line when you press enter on the last field.

  The last thing that I want to achieve is to creata a dynamic action trigger that fires only when cursor is in the last row of tabular presentation. I tried to do that with the function. is() JS, but without success.

  Is there a way to test whether the current row (the row with focus) is the last line in the form of tables?

  Yes, look that I wanted to accomplish was that, if the cursor is in the last line (column_name1) that if the user presses THE button the last row is deleted and cursor is focused on the previous line (column_name2).

  After numerous tests that would be a DA who works for me:

  Event: Down key

  Selection type: jQuery Selector

  jQuery selector: .column_name1

  Condition: Expression JavaScript: (event.keyCode = $. ui.keyCode.UP) & (.closest("tr").is$ (this.triggeringElement) (": last-child"))

  Code:

  $(this.triggeringElement).closest("tr").remove ();

  $('input.column_name2:last').focus ();

• Advanced table last line

  Hello I have an advanced array.
  

  When I click on apply and remove transactions.

  The table is updated, and it brings me to the last line of the table, i.e. the rank 11 in this case.

  Is there a way to always stay on the first set of rows?

  vo.first () call outside the loop. option 1

  See you soon

  AJ

• [ADF, JDev 12.1.3] To run a query on the fly is always necessary to define a VO? How to get the Id of the last line inserted in a VO...

  Hallo,

  Sometimes, in the code for my application, I need to run smaller queries to retrieve data from the database.

  I wonder if for these queries, it is necessary to define a View object or if I can avoid this for example creation and execution of a VO on the fly.

  In this case I would not define a VO, given that queries will be never used to display data, but only for the internal logic.

  A use case, I want to solve it next.

  I would like to create a function to be used after validation for last inserted record by a user in a TableVO.

  For example

  Select the Id of the Table where UserId =? and Type =?

  The query should be run in a managed bean...

  public String okButton_action() {}

  OperationBinding operationBinding is BindingsUtils.getBindings () .getOperationBinding ("Commit");.

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ()) {}

  Error handling

  return;

  }

  Here, I need to:

  1. run the query to get the Id of the last inserted record

  2 call the setCurrentRowWithKey on the TableVO to update the display

  and get the Id (identity/auto-increment) than the database

  assigned to the field
  

  return "return"; }

  If I can create a function that creates / runs the VO on the fly and return the value ID... It is best to create it in a class of public services or in the implementation class TableVO?

  I need to get the Id of the last line inserted since the ADF is not able to manage MS SQL Server identity fields (it seems that REFRESH AFTER INSERT cannot be used with non - Oracle DB).

  Any notice will be welocome.

  Thank you

  Federico

  The query should be run in a managed bean...

  Much better to execute the query in the template project.

  Example query: http://amit-adf-work.blogspot.com/2013/09/how-to-execute-sql-using-adf-application.html

  If I can create a function that creates / runs the VO on the fly and return the value ID... It is best to create it in a class of public services or in the implementation class TableVO?

  If you have the function that accepts the SQL as a parameter, then this should go to class util.

  Dario