Latitude e5550 "unknown device" Win7 32 bit

Similar Questions

• Satellite C850 and Win7 32-bit - unknown device

  Hey everybody,

  I have re installed windows 7 32-bit in my C850-A670, part of the Staellite not. PSKC8V. There is an unknown device with Hardware Ids:

  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004 & SID_FB 311179
  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004
  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31

  Please hep me find identify the driver for this device.

  Thanking you in anticipation.

  Concerning

  Post edited by: aleempk

  Hello

  You can identify the unknown device if you use the http://www.pcidatabase.com/index.php page.
  8086 research provider > Intel
  Research of device 1E31 > USB 3.0

  Try please install the driver USB of your computer. You can find it here.
  Check it out and post comments.

• Latitude E5550 pilot win 8.1 unknown device ACPI\INT3401\2 & DABA3FF & 1

  Hi, I need the driver for WIN 8.1 for unknown device ACPI\INT3401\2 & DABA3FF & 1

  Where can I find this driver?

  Thank you
  Simone

  Hey, it's a collaboration Performance Control processor Intel driver.

  www.dell.com/.../DriversDetails; Starts = 3423072288 & WB64A = osCode & productCode = latitude-e5250-computer laptop & languageCode = EN & categoryId = UT

• [LATITUDE PROCESSORS E7450 AND CONTROLLER] Unknown device ACPI

  Hello

  IM using an E7450 processor and controller LATITUDE and have problems with an unknown device:

  

  Does anyone know what driver is missing?

  Hi Alexbo,

  Ask you to provide the serial number of the system, the operating system installed on the system as well as the version (32-bit or 64-bit) and the region to which you belong (via only private message) so that I can check the system specifications to help you with the link for the driver.

  Waiting for your response.

  Sincere greetings,

• Satellite C850D-12U - Win8 64-bit with ACPI\VEN_TOS of unknown device

  Hello community,

  I reinstalled my Satellite C850D - 12U PSCC2E and now I have an unknown device.
  Hardware ID: ACPI\VEN_TOS & DEV_6205

  I did some general research on the internet and it seems that it is to do with Bluetooth.

  I installed the driver on the Toshiba site, unfortunately the problem is not resolved.

  Do you have some ideas what happened?

  SRY for my bad English ;-)

  Greetings mounisport

  According to specification for laptop, that your laptop comes with Win8 OS 64-bit so you have reinstalled original recovery image and use laptop with factory settings now?

  Notebook with factory settings should not have these problems so I put t understand why you have this problem.

  Can you please send more info on this unknown device?

• Satellite X 200 - 21 d - two unknown devices after installing Vista 64 bit

  I just newly installed (my Vista 64-bit), my laptop 21(d) and noticed that in Device Manager, there is option - hidden features, then 2 new unknown devices appear.
  What are these devices and where to find the right driver for it?

  Hi there is green Orchid,

  Is the vista 64-bit, that you have installed the software that came with the system or a version of windows?

  Before installing vista, have you checked if there are external devices connected to the system?

  Post edited by: iSkO

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• Satellite A500 - unknown device after installing Win7

  Hello

  I just installed Windows 7 64 bit in my laptop Toshiba Satellite A500-132 and in Device Manager its saying that there is no unknown device ACPI\ENE0200. Do you know what drivers should I install?

  And the second problem is that when I installed the pack value there is usually a red light that shines through the headphone jack, but when I installed the audio driver of light disappeared and doesn t shine more.

  Y at - it a fix for this?

  Hello

  I agree with the user above. This sounds like the CIR port and you need to download this driver.

  But I a bit confused about the light in the headphone jack of Mr. are you sure that there's a light or you can post a photo for example?

• G530 (4446 - 22G) unknown device after installing Win7

  Hello

  I recently installed windows 7 ultimate 64-bit on Lenovo G530 laptop father (4446 - 22G). In Device Manager, I see 2 "base system devices" in yellow that are not recognized. Does anyone have an idea what might these devices? I attach a screenshot of the Device Manager both by type and connection.

  Also, I installed the management of energy for win7 64 bit, but the Fn keys do not work. Any suggestions on this subject?

  Thank you in advance.

  

  Hi, I think your Lenovo laptop is abit old model. Forgive me. Try to install this and see if it solves your Fn keys does not.
  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/52pm06ww.exe

• P 8470 & HP HP 8440 P: upgrading to W10 Pro 64 bit / device Reporting - unknown device manager

  I have recently upgraded to Windows Pro 64-bit 10.  Machines involved are - 8440p & 8470p running W7 Pro 64-bit.

  The Device Manager shows an unknown device - ACPI\HPQ6000\3 & 33FD14CA & 0.

  Could someone tell me what this is in reference to.  Perhaps point to a driver that I could update.

  Thank you / / Jeff

  You are the very welcome.

  The reason why you don't see the driver is because most of the drivers are missing in support pages, which have not worked directly for HP split into 2 companies from 1 August.

  This is certainly the driver you need.  If the version of W7 works, I can't say.

  See if it works.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

  If this driver does the same thing...

  Go to Device Manager and click on the unknown device of 6000 who need pilots.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option, then at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Click on disk and go to C:\SWSetup\sp59282\accelerometer and select the HP Mobile Data Protection sensor and see if the pilot goes like this.

  Here's a partial copy and paste of the accelerometer installation information file.

  As you can see the device is supported by the driver.

  But it's the most recent driver is there, I know.

  [Manufacturer]
  Mfg % = HP, ntamd64

  [HP.ntamd64]
  DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ6000

• Pavilion 15 t-p100 CTO: USB driver for Win7 x 64 missing, also 'unknown device '.

  Decommissioning of Win8.1 to Win7 x 64 Pro. Most of the drivers; opportunity of Lenovo for Realtek Ethernet controller and works well. Two unresolved problems remain under 'other devices '.

  "Universal Serial Bus (USB) Controller" has no driver. Seems strange, like "Generic hub USB", "Intel 8 series Enhanced Host Controller #1-9C 26", "USB Composite Device" and "USB root hub" are all installed and that responded to the questionnaire. " Tried sp61293.exe to another post, but OS unsupported.

  "Unknown device" listed. Properties display these fields: Hardware ID 'ACPI\HPQ6007' and ' * HPQ6007 ', CONFIGFLAG_FAILEDINSTALL, \Device\00000054, CM_DEVCAP_SILENTINSTALL capacity 00000020, DevNode status 01802400 DN_HAS_PROBLEM DN_DISABLEABLE DN_NT_ENUMERATOR DN_NT_DRIVER, problem code 00000012, ACPI\PNP0A08\0 parents, brothers and sisters (many), install error E0000203, other fields are bad GUID and comments of unknown device.

  Computing Nice, friendly OS needs.  Thanks for your help.

  Hello:

  You can use all the W7 x 64 drivers and software (except the BIOS and firmware files) the p000-15 t on your model.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

  The unknown device needs this driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. Software HP 3D DriveGuard protects the hard drive by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp69011.exe

  There are two pilots usb3 related here.  I believe that you need it...

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp68928.exe

• T440s - Win7 driver - unknown device

  Hello

  I installed Windows 7 64 bit on my T440s and now I have an unknown device in Device Manager. Could someone point me to the right direction for which driver I need?

  The hardware ID

  USB\VID_138 & PID_0017 & REV_0078

  USB\VID_138 & PID_0017

  I couldn't understand it. Thank you very much.

  Okay I found. This is the driver of the fingerprint ;-)

• Windows 7 Home Premium 64-bit with Canon IP6600D printer and unknown device

  I have a Windows 7 Premium build with a Canon Pixma IP6600D printer.  It worked sporatically at first with my Windows 7 until recently.  Now, I get an unknown device and the USB Plug N Play reports that it is not recognizing the device.  The USB port on the printer is good as it works perfectly on my XP machines and the USB port is on the PC as the other devices are recognized without incident.

  I tried stuff Device Manager usual for updated driver, updates the window, etc.  As this is a printer compatible 64-bit of Windows 7 (with some minor limitations), I was wondering why all drivers for Windows 7 is not recognize this printer.  Printer is good, USB is good, the cable is good.  Of course, the OEM driver disk is more compatible to reload the printer because it is a 32-bit application.  So, I rely on Microsoft Windows 7 drivers Canon for the deal.

  Just got off the phone with Canon and they confirm that the driver of Windows 7 are compatible plug-n-play and all I need and that Canon does not provide one direct driver other than the Add on Windows 7 x 64.

  Yet once, I ran all the windows and the driver updates to say everything is as current as possible.
  Next?

  THX.
  AGE

  Get the 64 bit Vista http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864&default_os=windows_vista driver and install it, then the add-on (if you need it) on the same page, but change the OS to Windows 7 64-bit.

• Install Windows Mobile Device Center fails on Win7 64 bit

  Hello world

  I'm trying to install/reinstall WMDC 64 bit on Win7 (64 bit). In the last step of the installation, it tries to add a new device. I can see in the Device Manager. But the installation of this device fails, and then the new device is removed. The WMDC is here, but it does not work and bluetooth devices do not offer the service "ActiveSync".

  Can anyone help here please?

  Thank you and best regards,

  Franz

  Hi Srimadhwa,

  Thanks again. It's corrected now. I think the problem was with the handheld device. He needed that he must accept the USB for ActiveSync connections. :-/

  So the major issue is fixed now, but I wouldn't mind not any progress with other minor issues.

  Thank you and best regards,

  Franz

• Bluetooth device driver not found after accidental uninstall (Win7 64 bit)

  I use a Plantronics M50 bluetooth headset on my mobile, Skype etc. All troubleshooting yesterday (had a problem with the microphone volume is very low) I followed a few steps of an article if found on a Microsoft forum, telling me to uninstall the driver, as well as to restart my laptop (Win7 64 bit) would recognize and re - install the driver.

  In Device Manager, I right-click on the M50 (under audio, video and game controllers) device and chose to uninstall (as prescribed in the MS article). Here's where I shot myself in the foot; I ticked the box "Delete the driver for this device" (thinking that Win7 would get a fresh driver from Windows Update to reboot)

  After the reboot, my laptop started to reinstal the driver device, but for "Bluetooth device" reports "no driver not found"

  I myself tried in vain things:

  • tried to find the driver sur.com, but isn't available (plug-and-play)
  • installed software (incl. Plantronics Control Panel) Plantronics package
  • I tried Windows Update
  • installed Microsoft Windows Mobile Device Center 6.1 Driver (as advised on various sites to set "Bluetooth Peripheral Device" reports questions 'no driver found'

  At the hope that someone had a suggestion for what else to try, or maybe how to find out what that exactly that I deleted by choosing 'delete the driver for this device '.

  Thanks in advance!

  Edit:

  Just in case it helps, I noticed that the following folder is created at the time of uninstal and reinstal, containing calisto.inf, calisto. PNF and Calisto.cat

  C:\Windows\System32\DriverStore\FileRepository\calisto.inf_amd64_neutral_2b13d4544d6cf2e6

  I decided to use Sytem Restore to restore my system to before I uninstalled the driver. There are a few downsides to this, but so far the benefits outweigh them.