Leader of the error
Hello!
I have a question:
Is there a way to control where the errorTip will appear when a Validation error occurs?
My problem is that I have a form (form.swf), which is loaded into another swf. On mouse over, the tip shows, but extends outside the main swf.
I want to know how to do is find a way to place the ToolTip to a fixed position and not to the right of the field.
Any ideas?
Thanks in advance!
"Kallis"
Reposition on the event TOOL_TIP_SHOW
Tags: Flex
Similar Questions
-
Reference typedef enum class conversion leads to the error 1057
In the vi above, I try to get the number of entries and the string to a type enum values. I get error 1057 in the most specific class vi. Where is my mistake either I misunderstood something?
Thanks in advance.
Thank you.
I didn't go to LV 2015 before the first service pack is not available.
Your Board, I found a solution: I extracted the frontpanel typedef element and cast to the enum. It's not like simple, in fact, it is much more complicated, but it seems to me the right way to do it. The attached picture shows a vi, which takes a ref vi of the typedef as input and generates output channels of the enum defined it. There should be a few errors that I have did ' t do again, for example, make sure that the entry is a typedef and that it defines an enumeration, but the principle is there.
-
Subinacl/leader has the error "the system cannot find the file specified."
D:\>Subinacl/file 'C:\Windows\system32\themeservice.dll' /setowner = administrators/Grant = Administrators = F
C:\Windows\system32\themeservice.dll - error from CreateFile: 2 the system cannot find the specified file.
Elapsed time: 00 00:00:00
Fact: 1, 0, 1 update failed, syntax errors 0
Last fact: C:\Windows\system32\themeservice.dll
Last failure: C:\Windows\system32\themeservice.dll - error from CreateFile: 2, the system cannot find the specified file.D:\>dir "C:\Windows\system32\themeservice.dll".
Volume in drive C has no label.
Volume serial number is 0c 01 37 - 5 cDirectory of C:\Windows\system32
May 12, 2015 themeservice.dll 44 544 13:51
1 file (s) 44 544 bytes
0 11,505,455,104 dir bytes freeWhat's wrong?
The two commands (subinacl & Icacls) will work perfectly here, but they omitted to apply permissions
Reason: The Trusted Installer is the owner of the file. In my tests SubInACL could pull off not property of the Trusted Installer, or it could change the permissions, even when the property had been taken.
You can enter property with TakeOwn and changing permissions with icacls.
John
-
Replacement of the cartridge leads to the error message "paper jam".
Hi - I just replaced the cartridges Photosmart 2575; error message "Paper jam", but there is no paper anywhere near the machine...
Problem seems to be the color cartridge.
Anyone else had this?
Anyone know a phone number to talk to HP? Especially if it's a number in the United Kingdom?
Thank you very much
H
Here is a link to double check for a paper jam.
http://goo.GL/qZXiQThe number to contact HP (0844 369 0369) UK support
-
vmrun start leads to a "error: operation failed because of the current state of the system.
Hello
I am running the vmrun like this on the console command.
/ usr/bin/vmrun t CR h https://ourhost/sdk u ouruser Pei ourpwd start ' build001/build001.vmx [datastorename] '.
I get the error text:
Error: The operation has failed because of the current state of the system
When I opened the Vsphere client, I see that the operation began, but also with an error: the operation is not allowed in the current state.
I'm running on VMWare Vsphere Server Version 4.1.0 Build 258902
How can I make sure via command line that the State of the system is correct. Is there a way to get corrected through an order status?
When I try to power to the top of the image within the user interface, it works, but I need to know the opposite effect.
Thank you.
Hello and welcome to the forums.
check via the State of the line of command of this virtual machine if necessary, unblock the process using vmsuport x how to show in this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004340 Ko
-
Firefox does not start, the error xul.dll thowing
Hello!
Stupid Flash plugin crashed my browser, and now efforts to launch the Firefox browser leads to the following error:
Head: 'firefox.exe - Entry Point not found ".
Text: "the procedure entry point not found hb_ot_layout_table_get_script_tags in the C:\Program Files (x 86) dynamic link library \Mozilla Firefox\xul.dll."And when I click on the 'OK' button, the following error: "unable to load XPCOM. And now it is all browser activity. In the installation folder (C:\Program Files (x 86) \Mozilla Firefox\) xul.dll and other files, including updater.exe, had changed their attribute "update" at the time of the accident of the latter. Dr.Web cureIt utility found no virus there. So, I think, I have to reinstall the browser.
Is it possible to fix Mozilla with the record of my history and bookmarks? I backed up my profile folder (method of copy - paste), so how can I reinstall the browser and then restore my profile?Firefox starts when your computer is in the network connections of the spirit of the mode safe mode enabled?
If this is not the case, try the following steps.Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
The report please come back shortly.
-
I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.
This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required
"Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?
NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).
So yes, this is what he does now.
It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »
Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.
I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.
Ideas? »
Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.
http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml
Above is how the gateway recovery is supposed to work.
Also, try this:
Try using a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
To exclude software as the problem.
See you soon.
Mick Murphy - Microsoft partner
-
Media card reader disappears from leading to the card not being recognized under computer
Original title: two years with media player card hardware/software problem?
When I insert my card player media the G, H, I and J readers disappear which leads to the card is not recognized. If I completely shut down my computer, they come back and the card will read for this session. This does not happen if I do a simple reboot. My computer is not quite two years old and it lasts since almost the beginning. Dell has replaced once the card reader and cable three times and the motherboard. The last technician who came to me thinking that it might be a software Bus USB error. All drivers have been updated. I am at my wits end, because the problem does not happen whenever I inserted the card, but now, it happens more frequently. This problem seems to occur with the map of media player. And Yes, it happens with all Media Player cards. I mainly use this computer to upload photos. I was told NOT to back up my computer because, if it was a software problem I just would be to reinstall the problem once I did a restore. Is there someone out there who can help?
Hi Chris,
I was finally brave enough to install the updates of the firmware. I went from the 7.8 version version 7.12, but no luck. Initially, it worked, but once my computer came into fashion 'sleep', and I returned to use again, it didn't work. This has been a problem for almost all the time that I owned the computer. Very very frustrating!
Any other suggestions, anyone?
Thank you
Sherri
-
I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.
Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »
I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.
In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.
My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.
Suggestions have greatly accepted.
I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.
The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta
Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.
I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).
Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.
-
HttpPushDemo throws the error of missing on real device resource
I am trying to run the example of httppushdemo on a real device to test for problems with an application to push. However, if I run the application in the device, I get the error "Missing resource com.rim.samples.device.resource.HTTPPushDemoRes.
I looked everywhere to find out how to get the resource on the device and impossible to find a solution. The documentation I found would lead me to believe that it should be compiled in the Cod.
Why I'm so confused (and frustrated after a long day of our push to debug problems)
Thank you
-Bill
In older levels (4.3 and earlier OS), RIM ran the code, so that the resources (labels field, the names of menu etc.) where in a separate package. It's a good way to demonstrate how you could internationalize applications, but also everyone confused because putting the application on the device, you need to charge upward of the cod resources as well.
At the latest OS (4.5 +), they do not do this.
The demo of http push has not changed, so you can take the source of the 4.5 or later in a previous level JDE and compile it. It will take so NOT all external files of cod. That's what I recommend you do.
However, for you to win download the JDE together for a single file, it is here:
/** * HTTPPushDemo.java * * Copyright © 1998-2008 Research In Motion Ltd. * * Note: For the sake of simplicity, this sample application may not leverage * resource bundles and resource strings. However, it is STRONGLY recommended * that application developers make use of the localization features available * within the BlackBerry development platform to ensure a seamless application * experience across a variety of languages and geographies. For more information * on localizing your application, please refer to the BlackBerry Java Development * Environment Development Guide associated with this release. */ package com.rim.samples.device.httppushdemo; import java.io.*; import javax.microedition.io.*; import net.rim.device.api.ui.*; import net.rim.device.api.ui.component.*; import net.rim.device.api.ui.container.*; import net.rim.device.api.system.*; import net.rim.device.api.util.*; import net.rim.device.api.io.http.*; /** * The client side of a simple HTTP Push system. * This application will listen for image data on the specified port and * render the data when it arrives. */ public class HTTPPushDemo extends UiApplication { // Constants ---------------------------------------------------------------- private static final String URL = "http://:100"; // PORT 100. private static final int CHUNK_SIZE = 256; // Members ------------------------------------------------------------------ private ListeningThread _listeningThread; private HTTPPushDemoScreen _mainScreen; private RichTextField _infoField; private RichTextField _imageField; public static void main(String[] args) { HTTPPushDemo theApp = new HTTPPushDemo(); theApp.enterEventDispatcher(); } // Constructor -------------------------------------------------------------- public HTTPPushDemo() { _mainScreen = new HTTPPushDemoScreen(); _mainScreen.setTitle(new LabelField("HTTP Push Demo" , LabelField.USE_ALL_WIDTH)); _infoField = new RichTextField(); _mainScreen.add(_infoField); _mainScreen.add(new SeparatorField()); _imageField = new RichTextField(); _mainScreen.add(_imageField); // Spin off the listening thread. _listeningThread = new ListeningThread(); _listeningThread.start(); _infoField.setText("HTTP Listen object started"); pushScreen(_mainScreen); } // Inner Classes ------------------------------------------------------------ private class ListeningThread extends Thread { private boolean _stop = false; private StreamConnectionNotifier _notify; public synchronized void stop() { _stop = true; try { // Close the connection so the thread will return. _notify.close(); } catch (IOException e) { System.err.println(e.toString()); } catch (NullPointerException e) { // The notify object likely failed to open, due to an IOException. } } public void run() { StreamConnection stream = null; InputStream input = null; MDSPushInputStream pushInputStream=null; while (!_stop) { try { // Synchronize here so that we don't end up creating a connection that is never closed. synchronized(this) { // Open the connection once (or re-open after an IOException), so we don't end up // in a race condition, where a push is lost if it comes in before the connection // is open again. We open the url with a parameter that indicates that we should // always use MDS when attempting to connect. _notify = (StreamConnectionNotifier)Connector.open(URL + ";deviceside=false"); } while (!_stop) { // NOTE: the following will block until data is received. stream = _notify.acceptAndOpen(); try { input = stream.openInputStream(); pushInputStream= new MDSPushInputStream((HttpServerConnection)stream, input); // Extract the data from the input stream. DataBuffer db = new DataBuffer(); byte[] data = new byte[CHUNK_SIZE]; int chunk = 0; while ( -1 != (chunk = input.read(data)) ) { db.write(data, 0, chunk); } updateMessage(data); // This method is called to accept the push. pushInputStream.accept(); input.close(); stream.close(); data = db.getArray(); } catch (IOException e1) { // A problem occurred with the input stream , however, the original // StreamConnectionNotifier is still valid. System.err.println(e1.toString()); if ( input != null ) { try { input.close(); } catch (IOException e2) { } } if ( stream != null ) { try { stream.close(); } catch (IOException e2) { } } } } _notify.close(); _notify = null; } catch (IOException ioe) { // Likely the stream was closed. Catches the exception thrown by // _notify.acceptAndOpen() when this program exits. if ( _notify != null ) { try { _notify.close(); _notify = null; } catch ( IOException e ) { } } } } } } private void updateMessage(final byte[] data) { Application.getApplication().invokeLater(new Runnable() { public void run() { // Query the user to load the received message. String[] choices = {"Ok" , "Cancel" }; if ( 0 != Dialog.ask("New message received. Do you want to render it?" , choices, 0) ) { return; } _infoField.setText("Text received - size: " + data.length); try { _imageField.setText(new String(data)); } catch (Exception e) { Dialog.inform(e.toString()); System.err.println(e.toString()); } } }); } protected void onExit() { // Kill the listening thread. _listeningThread.stop(); try { _listeningThread.join(); } catch (InterruptedException e) { System.err.println(e.toString()); } } private class HTTPPushDemoScreen extends MainScreen { /** * @see net.rim.device.api.ui.Screen#close() */ public void close() { onExit(); super.close(); } } } -
Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.
The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.
The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!
My specs are:
Avatar
CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
GPU: Geforce GT 64016.0 GB
operating system 64-bit, x 64 processor
Windows 8.1Hi Kaelie,
This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.
Just reply to us if you are having problems with Windows in the future. We will be happy to help you.
-
Where can I get a list of the error codes for InDesign server
I use InDesign server to the process that a lot of jobs and could not find a list of error codes generated by InDesign Server. Specifically, I'm looking for error codes generated in cases where the InDesign customer seem to have made a mistake. To give an analogy, the Apache HTTP Server generates class 4xx Code of the status each time the client seems to have erred. Is there a list of error codes similar for InDesign server.
For example:, I wrote a work to convert .indd idml files and voluntarily gave a corrupt .indd file to convert. I got the following response code.
Error code: 29441
Error message: could not open the file "corrupt_file.indd". Adobe InDesign Server can not supported file format, a plug-in that supports the file format is may be missing, or the file may be open in another application.
I couldn't find a reference to the error code 29441 in the Adobe documentation. All leads or references?
Thank you
Michel
You can download here CS6 server error codes:
-
Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot
The message is usually due to the Admission HA and reservations control configuration memory set on one or more virtual machines. With the default configuration HA calculates the sizes of slot based on the memory and CPU. Any reserve on a virtual machine could increase the size of the slot and lead to fewer available seats. What you can do is either to reduce (or eliminate) reservations about the VM (s) or set admission control to a percentage rather than the host failures tolerated.
André
-
I finally wittle down a mistake which took place in my much larger project to a few lines of code simply reproduce the error. It errors on PC and MAC cs5.5. Here are the scripts/process of how to recreate the error.
startup script to set the engine: jumpStarter.jsx
#targetengine "testEngine" var globalVar = "testing";
script that calls another via doScript: globalTest.jsx
#targetengine "testEngine" setLabel(); function setLabel(myParams) { var myFile = new File(app.filePath + "/Scripts/Scripts Panel/testScript.jsx"); app.doScript(myFile,ScriptLanguage.JAVASCRIPT,undefined,UndoModes.fastEntireScript); }script that adds a label to the document: testScript.jsx
#targetengine "testEngine" doStuff() function doStuff() { app.activeDocument.rectangles.add(); app.activeDocument.insertLabel("tempLabel","anyLabel"); //app.activeDocument.updateCrossReferences(); }The process is simple. Just put the jumpStarter.jsx in the folder and the other two scripts in the folder of the startup scripts Panel. Load Indesign and double-click on the globalTest.jsx in the actions panel. You should see a rectangle placed on the page and a * next to the file name. If you close the document and choose to not save Indesign must block. I'm interested to know what is causing this crash!
Note: after days of attempts, I came across the commented line of code in testScript.jsx. If this line is décommentée then there is no problem in closing the document! However, I'm not sure what actually this method and after researching what cross references are that it does not seem applicapable. I'm looking also someone explain this if possible.
Here is the protectiveShutdownlog that occurs: http://pastebin.com/04pHQv5s
Here is the report of accident that occurs: http://pastebin.com/JA6esJR2
Hi bduffy,
I have experienced this bug appeared in ID CS5 and is not yet resolved. He is not related to the use of a startup script, a persistent engine, app.docript (), etc., and it has no connection with global variables, variable names, etc..
The bug occurs generally when:
(1) a script inserts an tag in the active document;
(2) once the script has completed, the user tries to close the active document and does not record it.
Minimal code that should lead to the bug:
app.activeDocument.insertLabel ('foo', 'bar');
then the user, go to file > close
My own speculation on the causes of this bug:The internal pointer that holds app.activeDocument is not correctly updated after insertLabel() is done. Perhaps at some level subsystem does not identify the insertion of the label as an actual change and forget to update some underlying specifier... Who knows?
Patch:
I found that all access to property app.activeDocument at the end of the script usually corrects the instability because this probably causes the system to recalculate the document specifier:
app.activeDocument.insertLabel ('foo', 'bar');
app.activeDocument; patch
=> no bug
As a stronger and safer approach, I suggest that you add this line at the end of any script:
app.properties.activeDocument & app.activeDocument.getElements ();
This is of course no guarantee!
Hope that helps.
@+
Marc
-
clear the error messages for form fields
Hello
I use jdeveloper 11.1.1.4.i having the form with the user name and password.
I need to clear the error messages when the password meets the model.
I followed this
http://blogs.Oracle.com/jdevotnharvest/entry/using_javascript_to_clear_validation_error_messages
but this leads to a few other issues.it is clear all page error messages,
but I need to clear the error messages for a component not the adf page.The very purpose of ADFPage has a method
clearMessages public Object clearMessages(String componentId) Clears a messages for a particular component id. If component Id is null then the Global messages are cleared. Parameters: componentId - a componentId or null for global messagesFind out here http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12046/oracle/adf/view/js/base/AdfPage.html#clearMessages_String _
This should allow you to erase the message of an element.Timo
Maybe you are looking for
-
Why my windows xp cannot run cs6 portable potoshop?
Dear Webmasters... After Reinstalling windows xp 2002, I can't run new portable potoshop cs6 and other applications, such as applications that are required to use the .NET framework. And I got the chance to download .NET Framework 3.1, but the applic
-
My Windows XP Professional asked me to upgrade to windows 8 that I found SHRegGetValueW in the dynamic library of ink SHLWAPl.dll. How can I fix?
-
I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged. then he said that I could insert the windows installation disc, I did not. Thank you. Original title: a reg
-
People, my MSN Hotmail send automatically emails to all my contacts, I clears everyone, but the account always send emails, in my opinion, is a Virus. At the end of the letter appears after this web page. http://www.Tienda.masaiart.com//images/site.
-
Deleted my entire inbox - how to restore it?
I accidentally deleted my entire inbox - how can I restore it? It is not in my deleted files.