Why my windows xp cannot run cs6 portable potoshop?

Similar Questions

• Why the following command cannot run correctly?

  Why the following command cannot run correctly?
  

  SQL> exec DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE;
  BEGIN DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE; END;
  
        *
  ERROR at line 1:
  ORA-06550: line 1, column 7:
  PLS-00306: wrong number or types of arguments in call to
  'EVOLVE_SQL_PLAN_BASELINE'
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored

  Because it is a FUNCTION and not a PROCEDURE.

  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28419/d_spm.htm#CACEBBEI

• Bootcamp Windows 7 cannot run by VMWare Fusion 8.1.0

  I use MBP (13 "mid-2010) 2.4 GHz Intel Core 2 Duo 8 GB 1067 MHz DDR3 Nvidia 320 M 256 MB

  That's what I did in chronological order

  (1) improved my MBP to El Capitan 10.11.1

  (2) my VMWare Fusion Pro 7 did not work - asked me to upgrade to version 8 to access my Windows 7 Boot Camp

  (3) no choice... I had to upgrade to VMWare Fusion... fact to 8.0.0... my Boot Camp Windows could not always run... .deleted previous Virtual Machine... again added to select Windows in boot camp...

  (4) does not work either... just got a free upgrade to VMWare Fusion 8.1.0... now the question is much worse... when I try to add my windows Boot Camp... That said:

  " Volume the Boot Camp is not prepared to stand as a virtual machine. It seems that Windows don't is is not properly stopped the last time it was used.

  "To shut down Windows properly, go to System Preferences > startup disk and set Windows as the start-up operation.

  (5) tried to run windows to startup as suggested... says NO OPERATING SYSTEM FOUND... it seems that my windows boot file is missing?

  Wait a second... (I don't know why I did... but I 'played' with the utility drive Partition and tried to expand my (not accessible) windows... between step 2) and 3) above

  Ideas to solve my problem...

  Appreciated. Thank you.

  Step 1 has caused the problem. It may be easily fixable. Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Windows 7 cannot run artlantis studio 3

  IAM trying to install artlantis studio 3 but has a problem.am of compatibility with windows 7. looks like that other programs have the same aging.

  Hi Joseph,.

  1. what happens when you try to install the program?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2:

  Try to install the program in Windows vista compatibility mode and check if it works.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope the information is useful.

• Windows 7: cannot run the window update - error 80072F78

  Hello
   
  I just a new PC at my workplace with Window 7 OS and MS Office 2007.
   
  However, I could not run the update because of the error 80072F78 message window. I used issues of Update window to locate the problem, but failed to solve this problem. I turn off the firewall of the window but the situation is still the same, may I know how to solve this problem? My internet connection is not fast, it can only reach 75 kbps download, if this may be the reason for the problem?
   
    
  Thank you
   
  Low

  Take a look at this article:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  TaurArian [MVP] 2005-2011 - Update Services

• Recently installed windows 8 cannot use the portable camera

  Installed windows 8 and now I cannot use my mobile camera worked when I had windows 7 that I loaded all my drivers is a MSI laptop after visit site where it say the camera driver is provided by the operating system.

  have you activated in the camera application? Open the camera, then the charms bar and select settings and permissions, then turn on webcam/microphone.

  Try your cam now

  B Eddie

• Cannot run CS6 after using the CC (CC subscription has expired)

  I let my subscription CC expire (while my company treats a new license) and to do in the meantime to CS6. However, I cannot go beyond the message 'Renew your membership' and can't seem to save my copy of CS6 (it will not be displayed as a registered product and I can not add). I tried to use the CleanerTool Adobe CC (as recommended here), removed all Adobe products and reinstalled CS6 (and rebooted), but still can't make it work. Any help would be greatly appreciated!

  Hi Andre, try the steps mentioned in the link below.

  • License considerations mixed - if you have an active member of the creative cloud and a serial number for Lightroom 6

  Waiting for your response.

  Atul_Saini

• Why my Windows 8 to run my old Kodak AiO printer successfully?

  It worked great for a few months then quit work partially...! I played with him and can 't get any where with him? my computer says that it ' s probably just too old and MS won ' t take it anymore... It's old but works very well over 6 years, when he was working... anyone have a solution for this? I'm all ears

  Hello

  Are you sure that your computer has not upgraded to version 8.1?

  Unless you have disabled the Windows updates, he has probably done automatically...

  This caused all my computers\printers stop working...

  If you still have 'COMPUTER' on your desktop, it's win 8...

  If you have a 'THISPC', is winning 8.1...

  You have two options... Try your CD... which is what I use for an old Lexmark printer...

  Or go to Kodak and see if they have something available for Win 8\8.1...

  With my Lexmark, wouldn't a normal uninstall\reinstall... He'll just say 'Already installed', or would try to install a 2nd printer...

  Here's what I had to do and may be necessary with a driver Win 8...

  (1) turn on and connect your printer... This must be done of this once so he could appear in devices and printers... Otherwise, all I get with my machine is the Lexmark fax, and therefore, you can't "remove" the printer.

  (2) once the printer is visible in devices and printers, physically pick up...

  (3) ' REMOVE' the printer Lexmark and Lexmark Fax (if you have one) in devices and printers.

  (4) to stop the print spooler in the Panel "Services"... Administration tools... Services

  (5) uninstall the software\drivers... Doing this, I had two safety messages popup Windows Firewall to printer communication 'allowing '... I selected "allow."

  I then found with two printers in the printer preferences...

  I started and not the area 'Shared' on the first message... Only one printer this time...

  (6) at the Lexmark uninstall, Reboot prompt.

  (7) after the reboot, STOP the spooler to print again.

  (8) reinstall software\drivers... I used XP SP3 and Vista, the various attempts, and both worked Compatibility Mode... Connect the printer to the top when you are prompted by Setup.

  (9) unhook the printer again and restart. Bidirectional support should be enabled, and the setting does not stick if the printer is hooked... You must restart to clear the air before the next step.

  (10) to restart and two-way supported. To do this, go to devices and printers and select "Printer properties", and then on the "PORTS" tab The box is near the bottom.

  (11) set the preferences of the printer you are using, if no and it's ready to go.

• Why the window headers cannot be put out in the area of the screen?

  In windows 8 when you attempt to drag a header of the window outside the upper part of the screen, the header snaps back to the top of the screen.

  Can I disable this? Its not really useful and actively prevent the use of the complete workspace.

  And how can I disable the function that is causing windows that are moved to the top of the screen to go full screen?

  And how can I disable the function that decides that the window should be attributed half of the workspace when its being dragged and the cursor touches the perimeter of the workspace?

  Indeed, how can I disable all the behaviors of auto sizing of the windows?

  Hello

  I suggest you try the following steps for the automatic resizing of the window

  a. press the Windows key + C, in the type of easysearch, and then click accessibility.
  b. scroll down a bit, then click on make the mouse easier to use.
  c. scroll down and check the box last in this window: prevent windows from being automatically arranged when moved to the edge of the screen.
  d. click OK and you're done!

  See the short form for more information.
  

  I hope this helps.

• Now cancelled CC account, cannot run CS6

  My school has Mastersuite CS6 so I cancelled my CC paying account, but when I try to open Photoshop CS6 it takes me to my account page Adobe and said that my login is incorrect.

  "How do I cancel the creative clouds, and have your copy of Photoshop CS6 still work.

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• Cannot run as desktop estmaintenant configured Windows dreamscene

  Windows dreamscene cannot run because the computer is currently using more than one video card

  You don't give system specs.

  http://www.google.com.au/search?hl=en&source=HP&q=Windows+DreamScene+CAN%27t+Run+because+the+Computer+is+currently+using+more+than+one+video+adapter&btnG=Google+Search&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  There are hits on the link above to Google on this subject.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot run the system at boot restore upward and I don't have my CD it was broken. I could use my product key?

  My Windows Vista cannot run the restore of the system at startup, and it says press F11 to enter recovery mode and it dosen't work.
  I can't use the CD/DVD from the CD/DVD because my dad broke it.
  Can I do to solve this problem?

  Hello

  Contact the computer manufacturer and ask them why F11 does not work to start recovery to factory settings...

  Or other difficulty the CD / DVD Drive and ask the manufacturer of the computer of a set of to reinstallthe Operatying system recovery disks.

  They do normally for a low cost

  Any other tips we now give you another above, you should always a working CD / DVD player.

  For this you need a DVD player:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows 7 - cannot install system updates - "Windows Update service... does not work."

  original title: Windows 7 - cannot install system updates - "Windows Update cannot currently check for updates, because the service is not running." You may have to restart the computer. "

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: try to get weekly updates applied.  Since the 1845 update I couldn't have Nicrosoft updates applied to my system.  A disable the updates because the system continues to try, and I try again me and try all the time.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dena,

  I solved the problem: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  "FixIt" MS reported that he had fixed everything, and W7 update mechanism works very well- but the problem remains:http://support.microsoft.com/kb/971058

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?