LED push button

Similar Questions

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.

• Satellite P300 - 148 Vista Ulimate - LED light button does not work

  My laptop model is Satellite P300-148.
  I reinstall system-vista Ultimate.

  However, after installation, my * mute button or LED light button * cannot be controlled by press mute.

  It's like, normally, when you press the mute, the light will be switched on or off.
  However, this is no answers when I press on it.

  I can only turn lighting on or off using Toshiba help.

  Also when I press the "play" button, the windows media player has no more answers.

  So is it a solution? Or drivers?
  Thanks for the reply.

  Hello

  I think that these buttons don t work properly due to the Vista Ultimate.
  I checked some threads here and it seems that the PPV that controls this Toshiba buttons don t support the ultimate or the ultimate doesn't fully support the VAP.

  But just a question;
  Did you check the Toshiba Assist-> Optimize-> Toshiba button Support?
  This tool allows you to configure the buttons. Maybe you should check this.

• implementation of a push button

  Hey I just started using Labview and I need for a project on the recording of the results of strain gauge. I wrote a code for data recording, but I don't know if he needs calibration I use the NI 9237 strain gauge module and how to proceed to make the calibration? I tried the example find in Labview but its me gives an error and I do not understand FPGA. My second question is I want to use a digital input module to implement a push button so that the code turns on when its market and it stops logging when you press OFF. I do not know how that proceed and what is needed in the code to do this. I posted what I have so far and any help will be appreciated. Thank you

  "I don't actually like using the term 'guru', I actually perfer LabVIEW Overlord."  It really scared in the peasants of LabVIEW. »

  But seriously do anything is going to take a long time, is there no reason not to learn something.  Heck that's why universities, people are going to lose time to learn.

  Back to the original question a bit.  NEITHER offers calibration options

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207895

  https://www.NI.com/services/calibration.htm

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207957

  http://www.NI.com/white-paper/12788/en/

  Some hardware supports self-calibration but most don't.  You can also perform the calibration of your car, but I can't find the documents for this right now.  I think there is an example in the Finder of the example on calls to set the calibration offsets in the material.

• How to create table of 288 HP push button in the PXI-6509 (3pcs)

  Hi all

  Need help...

  I am a beginner in labview. & her first time use OR for my project.

  We must push buttom about 288 HP control panel. We use PXI-6509 (3 pcs)

  & I do a code (in tie).

  but some time appear as a bug if we push a button push button after all. but some time is ok.

  Please correct the code.

  Thank you very much...

  It seems to work fine for me.  What do you mean by "sometimes appear like a bug?  How is it not behave like you want.

  A few recommendations:

  1. There is no logical reason for the node feedback on some of your cables of the error.

  2. you can turn some of your groups of buttons in a cluster.  This way you can work on changing the value of a cluster and do not have to set up 100's of changes made to the values of the individual controls.  You'd also be abe to easily use the cluster to table to transform your cluster of Boolean Boolean rather than building tables table by manually cabling up to 100's of controls.

• Push button problem

  I have a program I write has about 5 push buttons for a user to select the different scenarios. However if the user presses a button and then the other without turning off the first, then the two buttons are then immediately and that's why both scenarios run. How can I make sure if a button is pressed, it will turn off when another button is pressed?

  Dennis Knutson says:
  Just use the radio button control. ???  DK?

  best-use an enum, the drop-down list box, or control ring to select one of several "scenarios" as an option (and exclusive)

• change the push button for control or indicator at run time

  Hello

  I have a lamp that can turn into power according to the value of a Boolean variable.

  There are two ways in which I can control the lamp.

  (1) manual mode in which the button must be used as control to change the value of the Boolean variable.

  2 auto mode) in which the value of the variable is changed programmatically. Push button must return to an indicator to indicate the value of the Boolean variable.

  I should be able to swith bw manual and automatic mode for the duration and the push button should switch to control and indicator respectively.

  For those who might wonder why it's necessary: there is a sign which must be controlled in manual/auto mode. in manual mode, operator will manually use the buttons as controls for updating the control variables, in auto mode, my control algorithm updates the variables, and the Organizer must be able to see which button is pressed and when. If the button should be the control of update of variables in manual mode and must be the indicator of the evolution of the variables in auto mode.

  How is that possible?

  A basic VI with three objects are attached, and the Boolean control variable is global.

  Did.

• How to control a box of series push button

  Dear Sir or Madam,

  I am relatively new to LabView and National instruments, but try to capture the response time of a human participant.

  A simple example of the tasks that I hope to accomplish is described as follows. I think that first of all, I will write a Labview program to present two pure sounds to the listener (one at a time), with a tone have higher than the other ground. In other words, pure acoustic sounds will be delivered to the ears of the listener through a series of regular computer headset. After listening to the two-tone, work of the participant is to discriminate which has higher ground, then press a button accordingly. My question is in relation to the buttons... It is my understanding that the buttons can be:

  (1) software buttons that are displayed on a touch screen computer.

  (2) physical buttons on a separate reply box which is connected to a serial port on a PC, or

  (3) physical buttons on a separate reply box which is connected to a material OR (an e/s of control map, perhaps!?)

  For some reason, he is I think understand that by using the internal clock of a PC is not reliable, due to the nature of multi - load Windows System. In other words, either by using a touch screen or a serial port on a PC is not a good idea; because if I do this, I use the internal clock of my computer, which can be interrupted by other programs running simultaneously on Windows System. In other words, the multitasking nature of Windows of the system will be inaccurate and unpredictable reaction time. It is also my understanding that, if I want a good accuracy reaction time (for example, down to words maybe 1 or 5 msec!?), I would need to use a separate clock which is designated only for this task. Once again, I'm stretching and trying to accomplish a task that is new to me, and I don't know if I'm not mistaken...

  I currently have several cards to control IO OR in my lab. They are the USB - 6216 BNC, PCI-6221 (with a block of connection BNC-2090), data acquisition 6062E WLS-9215 BNC and DAQ wireless. For the purpose of this new task, I think more on the use of the USB-6216 BNC or PCI-6221, if any at all. NOR sells any push button and related devices? So, I can use the clock inside a card of control of e/s? Or I have to buy a new set of devices?

  If someone could advise me on what configuraitons or options would work best for me this task, I'd be very happy.

  Sincerely,

  Fuh

  
  

• Trying to create a push-button locking with digital inputs

  Hello world

  I am writing a program to control a motor with 3 push buttons, upwards, downwards and stop. I want the top button to lock when pushed and delatch when the stop or down are pushed. I tried the example program Latch.vi REARMABLE of this Web site, but no luck. It seems that out of the gate AND is indeterminate. I have attached to my program, any help would be great! Thank you

  Use Index Array to get the desired Boolean value of the table.  If you do the wiring one index, it will give you element 0.  With this, you can have all the switches wired to different pins of the same registry on your DAQ hardware.  Then, you can read a byte and unravel what bit does what.  You will also need to build Boolean individuale in a table before you write in the acquisition of data.  Here's a quick example:

  

  You must decide which games to buttons that bit.  I have not yet checked your lock algorithm logic.

• I pushed buttons and now the screen one tinted sepia?

  original title: I pushed buttons and now it's all one tinted sepia?

  Hi, I was at my computer, typing, and I was trying to hold down the left button. I tried to type a letter near the shift on this side bar and I pushed buttons, and then it turned a sepia tint. I don't know what I pushed, I could have pushed the CTRL ALT FN or the WINDOWS KEY, but I'm not sure. I can't get the color back, but the computer works fine. Thank you.

  I would just add,

  No doubt, you can access your graphics card,

  Right-click on your desktop and select properties of the graph,

  Most of the sections have Restore / restore the default values listed.

  I would color enhancement would be a good place to start.

  

• Sort records by using a push button

  Hello
  
  I am new to oracle forms and I need help on how to sort the records using a button element.
  
  I have two blocks, let say BLOCK a (main block) and BLOCK B (detail). I have a default order by clause, say order by colonne_1 of b block.
  
  The question is, if I have two columns in block b (colonne_1 and column_2), how can I sort the records into column_2 by using a push button item?
  
  Thank you and best regards,
  
  Dave

  Hello

  Have you tried my solution? He made exactly according to your requirement.

  The EXECUTE_QUERY in the solution above required because you need to sort the records in another column. So, after setting the command records another column and show in this order, you must run the query again.

  Arun-

• Automatically run a push button

  Hello
  Is it possible to manually run a push button? The reason why I didn't just call the procedure directly is because it has a go_block and when I put it on post_query to the level of the form, it gives me the error illegal restricted procedure CLEAR_BLOCK in the POST_QUERRY triggering.
  I need a control block to fill when the new instance of the form I fill command block when the trigger Key_down, trigger Key_up, Key_prvrec and key_nxtrec are together on the specific control block.
  
  code snippit on above triggers is as follows
  
  If: system.current_block = "four" then
  go_block ('four_two');
  populate_avail_activity;
  go_block ('four_control');
  NEXT_RECORD;
  on the other
  NEXT_RECORD;
  end if;
  
  the code of procedure populate_avail_activity snippit
  
  declare
  cursor xxxxx <-important to know;
  cursor2 xxxx <-important to know;
  BEGIN
  
  clear_block (no_validate);
  FOR activity_rec IN activity_cur LOOP
  : four_two.activity: = activity_rec.activity;
  next_record;
  END LOOP;
  PREMIER_ENREGISTREMENT;
  
  exception when others then
  for new_activity_rec loop new_activity_cur
  : four_two.activity: = new_activity_rec.activity;
  end loop;
  END;
  
  
  a work-around, I has a push button that simply calls populate_avail_activity pressed, it works... now for only manually, tap it to them would be ideal.
  
  Any suggestions please
  
  Forms [32 bit] Version 10.1.2.3.0 (Production)
  
  Published by: DM on September 3, 2009 11:36

  This will help

  Re: Trigger WHEN BUTTON a button can be run from a procedure

• Update the Table with the push button

  Hi I want to update my table using the push button that requires a transfer of account
  
  For example a single account transactions into 2nd account
  
  
  I used this query, but his does not work
  
  Update of cb
  Set cb_acc_id =: block3.acc_id_target
  where
  cb_acc_id =: block3.acc_id_source;
  
  
  
  Concerning
  
  Wasim Ismail

  You may forgot to validate your update...

  BTW:
  your form will not recognize, you start a transaction and make an update in the database.