LEGO chess

Similar Questions

• LEGO chess game does not work on my windows vista computer. It ran fine on windows XP. What should I do?

  LEGO chess game loaded without problem on windows vista, but whenever my son trying to play, it says: "Please insert the legochess CD-ROM into the CD drive.  The disc is already but it just repeats the message?

  PS: I am a shareholder of Microsoft and so disappointed with Vista.  Give me XP!

  Try this link. There is a patch to correct this problem by the creators of this software.

  http://support.Selectsoft.com/products/L/LNLEGCHESJ.htm
  (Copied from above link)

  Question	I try to run the program, but a message "insert disk" always comes to the top. The software seems to be installed correctly.
  Description
  Solution	We have a patch for the failures of Lego that should solve the problem of "no CD in the drive". It is currently available for download on our site here: chesscdfix.exe

• How is it, I can not any form of an installer to answer even if I run it as an administrator?

  Am icurrently trying to install Starcraft II, but the applications install will not respond on the disk and install applications on other drives such as my lego chess disk. Should what steps I take to solve this problem? Also, to be more specific about the problem itself, whenever I click to install it as an admin it will ask for my password and duch and I hit continue, but even if the loading icon on the cursor when I did, it will just disappear to the regular cursor icon 10 seconds later as if nothing had happened.

  Hi Zachary Wright.

  Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• What on Earth is the lego man ' click me ' on the home page, and why he doesn't something when I click on?

  What on Earth is the lego man ' click me ' on the home page, and why he doesn't something when I click on?

  Click Me logo is part of the promotion of the Humble Mozilla Bundle - clicked once you should be able to control the character with the "WASD" and "IJKL" key.

  Citing the-edmeister https://support.mozilla.org/en-US/questions/1025706

  Who click Me the game is part of the promotion of the Humble Bundle of Mozilla on the default Home Page [topic: Home], which loads from the Mozilla servers in the "Brand Logo" section (DIV) of about: House. A feature that has been used in Firefox 29 [IDE] just before the start of the Olympic Games.

  Also, part of this promotion is addressed in the "excerpt" under the container of the research on the topic: homepage.

  If you want to prevent the section "Brand Logo" (and the "snippet" under the reservoir of research) never to be seen again, you can install this UserStyle and elegant. https://userstyles.org/styles/104673/about-home-hide-snippets-and-hide-brand-logo

• Firefox blocks Java for the NYTimes chess player; I do not receive a message allowing me to use the options described in section of Java to allow that.

  The lead sentence gives the essential. When I try to use the NYTimes chess player (to examine the games on the site of the NYTimes) I get a message that my security settings have blocked. The player uses Java, and it tries to open when I get the message, so I guess that Java is the problem. Article on how to enable Java described several messages that can appear which would give me the possibility to allow to run, but none of these messages appear in this circumstance - Firefox simply refuses to allow Java to run. Nothing in my security settings seems to relate to this issue.

  Hello, this message is not firefox but the java plugin itself - please refer to the oracle documentation: http://www.java.com/en/download/help/appsecuritydialogs.xml

• HowTo: get chess unicode to display correctly: 2659 UTF

  What should I do to get the unicode of chess characters display correctly.

  This page: http://www.fileformat.info/info/unicode/char/2659/browsertest.htm
  show me the unicode values in small boxes.
  None of the fonts of the "local fonts list" show the character correctly.

  You can use a Google search to find Web sites with a specific font.

  • http://www.Fonts2u.com/free-serif.font

  Select the table of characters - various symbols (191) to look at the symbols of chess

• Bluetooth connection with the Lego Mindstorms NXT robot

  Hello
  I got a license for Bluetooth Stack for Windows by Toshiba.
  I try to connect to the Lego Mindstorms NXT robot: http://mindstorms.lego.com/en-us/default.aspx
  But it does not work.
  The connection seems to be good and NXT and PC to find them, but when I try to connect, the NXT said "the line is busy".
  Is someone can tell me if he can get through this issue?
  Toshiba and Lego have an agreement on the connection of the questions?
  Thank you.

  Hello

  Do you have Toshiba notebook or just use the Toshiba BT stack?

  How to pass through this issue? Should anyone of us spent 250 Euros to buy it and test it at home? Dear oracid it's user forum and you can get help from someone who has the same home equipment and can help you with his experience.

  Agreement between Toshiba and Lego in my opinion it is not problem. Any manufacturer who build material and want to use BT must know how it works. On the market of equipment, there are specific characteristics for each communication technology and what do we do Toshiba is to build and offer the specified material.

  In your case, you must contact the Lego support and ask for help. they, no doubt, tested own stuff with different hardware platforms, the operating systems and software BT so Lego should have enough experience with own products.

• install game of Battle vs chess

  Hello

  I bought the game Battle vs Chess on the TopWare interactive site.

  I downloaded and drop the app game program folder.

  After the installation, ask Zuxxez Activator application for a license key number + inscription on web.

  So I registered and the application has been closed. A second email comes with the activation code. I open the application again, BUT it asks me for a key number + registration again.

  What I've done wrong?

  Contact the developer of the application. This is not an Apple product.

• My LEGO is flat...

  attempt to create LEGO-dust or sort of LEGO explosion.

  The brick is made in one minute (see preview screen Center), but when I do the group a cell particle is "flat":

  

  Although 3D, looks like it turns only around an axis... (??)

  tried various settings - no hope.

  Someone at - it advice?

  Sorry, but the way that you set it to the top will not work.  The 3D groups used as source for the cell particles get flattened, it has always been thus.

  By example, if you have 3 circles separated on Z in a 3D group and create a transmitter out of this group, the source of the cells still gets flattened, you don't actually have a particle composed of 3 circles of offset. You get a particle of cells that are flat, but the transmitter can project them in 3D space. For text 3D, if you use the object text 3D (single layer) as the source it will provide no flattened in the transmitter.

  That said, there is an "easy way" to do this and hard a way. First of all easy:

  1. set up your "Trade marked building block" in a group and Center it in the group.

  2 animate the rotation on two of the chains of the Group (X / Y for example).  I used the behavior of rate with slightly different values.

  3 export this output as a movie, and then import it into the movement.

  4. use the film as the source of the issuer. Make sure that the random boot image is checked in the settings of the transmitter.

  -You may need to adjust the rotation speed. I used this method to create particles of blood cells in the past and it worked fine.

  Pros: Simple configuration works in most cases. Faster and better performance.

  Disadvantages: Not true 3D, you must perform a new rendering of the sources of the cell if you need to change the items.

  90% of the time that this method will be good enough.

  Here's the hard, but it has limits (I'll get to those).

  1. in a new group, create your basic "box" using text in 3D. Using the commands to set layer transformation origin (Center of the world) on XYZ, is visually very well.

  2. based on the Properties tab, move the anchor point for the box originally as well. Check the position of the top, front and one side. You can reduce the opacity to see the grid in 3D.

  3. now, create a new text layer object to be the 'peg '.

  4. use the rotation settings in the appearance tab text to get the ankle facing the correct direction, associated with the box.

  5. move the layer 'peg' in the right position related to the area using the 3D transformation controls.

  6. once in place, select the layer and again move the anchor point toward the center of the world.

  You have now two objects which will have all created transformations effectively from the same point. The shared location of anchor is essential to make it work.

  7. Select the first box and create a 3D with that issuer.

  8 copy the random start in the control of the cell value. You will need it for each post.

  9. drag the layer peg on the transmitter, which will create a new cell.

  10. glue the random seed value in the box, the cell in peg.

  Here is where I would test the basic settings.

  IMPORTANT: THE VALUES IN CELL OR CHANGES NECESSARY TO EVERY CELL AND MATCH FOR ALL THE CELLS IN THE TRANSMITTER.

  For each cell in the change in the rate of birth to something low (I used 2) so you can see what is happening.  Reading and verification of the animation. If everything is configured correctly (original anchor point points are at 0,0,0 in the values of the world, random seed for the match of cells) that you will have the pegs that stick to the boxes.  If things don't stick you probalby have problems with the anchor positions (they do not match) or values of cells.

  Once you have set up the first peg and know that it works, you can add extra pegs by using the previous steps.  Then check that the anchors are centred and correspond to cell values. for each cell in the transmitter.

  So here are the limits.

  • Easy to break delicate installation (but not too bad).
  • If you wish the transmitter to turn cells, they will turn only on a single axis (z).  You can work around that, by linking the rigging the rotation of text object layer together values and then animate these on another axis, as Y.  However, this will affect all cells in the transmitter, so things a still fairly uniform.  To work around this problem, you can duplicate the text layers, create an another particle emitter with a few shifts (birth rate, direction of rotation, speed). When played together, they will look more random.

  Again, the most important thing to get this second method works is paired things (anchor points, the layer changes, cell parameters). Knowledge of the rigging/link can help.  FWIW, this configuration can also be much more intensive treatment depending on the purpose of text how he takes and create the number of particles, your mileage may vary (this is why there is the easy way).

  Good luck!

• Lego Mindstorms silent installation

  Hello!

  I want silent install edition teacher of Lego Mindstorms Education EV3. But I can't make it work.

  I use the command line: setup.exe having/q /acceptlicenses Yes/r: n

  I used this credit:

  ; --------------------------  How to use this file  ---------------------------------
  ;
  ; To run this installer in silent mode:
  ; 1 change the information below to match your company's information and the installation location.
  ; 2 run: setup.exe /q /AcceptLicenses Yes. Passing the value 'yes '.
  ;    the /AcceptLicenses parameter indicates that you accept the license agreements.
  ;    Alternatively, instead of / q, / QB can be used to run the installer in basic UI mode.
  ; 3. the installation program will automatically restart your system after the installation is complete.
  ;    To prevent the restart using the command line: setup.exe /r: n/q /AcceptLicenses Yes
  ;
  ; For more information on the automation of the installation visit www.ni.com/info and enter the code exdir3 info.

  ; --------------------------  Set feature states  ---------------------------------
  ;    Valid service States are: local, Absent, NoChange, default
  ;    Local - install (on the local hard drive). If already installed leave that he installed.
  ;    Absent - do not install it. If already installed uninstall it.
  ;    NoChange - do not install it. If already installed, leave it installed.
  ;    Default value is equivalent to not register the function in this file. The feature follows its default behavior.
  ;    To install EV3 in student mode, delete the "EV3_EDU_Mode" parameter on line 24 by removing the entire line.

  [Features]
  LEGO_EV3_EDU_Feature.ev3.edu.100 =
  EV3_EDU_Mode.ev3.edu.mode.100 =

  ; -All install directories-
  ; To use the default paths, remove the following section *.

  [Directories]
  LEGO_EV3_EDU_Feature.ev3.edu.100 =

  ; -Set the parameters of the General installation-
  [InstallationType]
  ; uncomment one of the following lines for student vs. teacher install
  DefaultRadioButton = TeacherInstall
  DefaultRadioButton = StudentInstall

  If I add = Local to the syntaxes features, that it returns an error when you attempt to install, saying that it is an incorrect syntax.

  When I install silent with equity, Lego Mindstorm installs students edition.

  If I try to create a new credit memo with /generatespecfile setup.exe, the installation process hangs.

  So what I am doing wrong?

  Apparently this depends on the version you are trying to install, you must therefore take account of this version in the features section.  For example, I was trying to install version 1.2.1 today and it did not work until I did the following:

  LEGO_EV3_EDU_Feature.ev3.edu.100 = local
  EV3_EDU_Mode.ev3.edu.mode.100 = local

  changed to

  LEGO_EV3_EDU_Feature.ev3.edu.121 = local
  EV3_EDU_Mode.ev3.edu.mode.121 = local

  And the installation in silent mode now works correctly.

• LabVIEW Terminal connects not to the EV3 EV3 software retail will be (but pilot LEGO will not uninstall)

  Windows connects successfully to the LEGO EV3 via USB or Bluetooth.

  However, the Terminal LEGO of LabVIEW 2015 do not recognize.

  I installed the software at retail EV3 for check and it * is * connect to the EV3.

  I'm trying to fix the "LEGO Mindstorms NXT x 64" driver, but it will not uninstall even if I uninstall everything of LabVIEW, including the module (input administrator rights when prompted.)

  I've been struggling with this days, and I need to connect my EV3 to teach my students LabVIEW.

  Any help is greatly appreciated! Thank you in advance.

  -Associate Professor Matthew,

  #Date: Thu, January 21, 2016 17:21:58
  #OSName: Windows 7 Enterprise Service Pack 1
  #OSVers: 6.1
  #OSBuild: 7601
  #AppName: LabVIEW
  #Version: 15.0 32 bits
  #AppKind: FDS

  
  21/01/2016 5:27:54.774 PM
  Coolish 0x00BA6193:
  c:\nimble\penguin\labview\components\mgcore\trunk\15.0\source\ThEvent.cpp(267): coolish 0x00BA6193:
  Minidump ID: 789e6f18-0e9e-4b10-8b46-c0dd7448d8d4
  $Id: //labview/components/mgcore/trunk/15.0/source/ThEvent.cpp#1 $

  We found it!

  Our IT Department has been able to dig up in the driver package and finally managed to uninstall.

  Something has been damaged and the pilot wouldn't uninstall correctly.

  This fixed the problem beautifully.

  -Matthew

• Could not load the Lego software using a student connection

  Hello all, I tried to get the Lego factory software shipped to work on our network (we are a school and use s RM CC3 network). I was able to get the package to work correctly for a user admin (full access to the local computer), but to us this software as a student, I get the following error. "Error loading ' fantom.dll initialization routine"A dynamic link library (DLL) has failed. " This error, as the software does, and then it breaks down before opening the main program. If someone could give me an idea what permission to give in the case or a solution on how to fix this? I have not downloaded the Toolkit or any additional software for the moment because if it is possible I prefer to get this work with the standard software.  Thank you very much in advanced, Richard

  Hello, we have solved the problem, we installed the software a differernt way and now, which seems to be working properly it could have been something wrong with the installation after all. It wasn't flaged, because it worked for an administrator.

  Cheers for your help tho.

  Soluition here: http://communities.rm.com/forums/posts.aspx?postID=45586&postRepeater1-p=2#58046 by Alex Hart

• LEGO Mindstorms 2.0 crashes at startup when LabView Signal Express is installed first

  When NI Circuit Design Suite education edition is first installed in a computer and the LEGO Mindstorms software second, the LEGO Mindstorms software does not work, he reported the following:

  Error: A required file is broken

  Possible solutions: reinstall the driver of LEGO Mindstorms NXT (tried but does not work)

  Error code: 1003

  Ordinal not found

  The 18 ordinal not found in the library of dynamic links NIVISV32.dll

  Error loading "fantom.dll".

  The operating system cannot run %1

  On other computers the LEGO software starts, it displays the part of the initial screen and then a small window will open saying that the Mindstorms software has made an error and that it will close. The previous report does not display.

  If LabView Signal Express is uninstalled and reinstalled the software, LEGO, the LEGO software works.

  I downloaded and installed the new and old of the NIVISV32.dll versions and is not correct the problem. I went as far as version 4.20 of the dll because it is dated in 2007 and dll files installed by the LEGO software when it works is also dated 2007, but if I install the dll without uninstalling LabView Signal Express, the continuous LEGO software does not.

  Please advice how to fix this without having to uninstall first LabView Signal Express. If the LEGO software is installed first, LabView Signal Express will use and no not to replace the old version of the dll 2007 installed by the LEGO software? Y at - it an update of the LEGO software that corrects this problem?

  I repeat: I know a solution is to uninstall LabView Signal Express, install LEGO Mindstorms and then reinstall LabView Signal Express but I have 60 computers already cloned and deployed with this problem, so I don't want to go to this long process to solve the problem. Computers use Windows 7 and the problems occur on both 32 and 64-bit versions of Windows 7.

  Any ideas?

  
  

• With the help of Lego sensors and motors through the LabVIEW and NI PCI card

  I want to connect a card PCI NI Lego motors and sensors and drive motors and the data of sense using LabView. What card PCI can I use? Thanks for a great site and fantastic community online.

  Hi Tom,

  Looks like a great app.  NXT with LabVIEW Migration will be a big intermediate step before joining more industrial and better sensors with a PCI, PXI, cDAQ or cRIO.  We have a lot of options when it comes to vision and control and acquisition of movement, and we have dedicated forums for all of these products as well.

  Machine vision: http://forums.ni.com/t5/Machine-Vision/bd-p/200

  Motor control and motor control: http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/bd-p/240

  Programming LEGO Mindstorms LabVIEW Guide: http://digital.ni.com/manuals.nsf/websearch/93B7EC451C8DEEC68625762B005380FE

  Getting started with LEGO Mindstorms: http://digital.ni.com/manuals.nsf/websearch/80456522F9BE87FB8625746400540977

  Good luck

• comunication between lego - pc

  Hello
  I had a BT program that runs on the NXT to read a gyroscope.
  But now I want to do another program on the computer, in which I need to know the values of the gyroscope.
  So I want that the NXT somehow sent the data to the pc values.
  I don't know which is the best way to do it, if only with messages from BT, or with an excell file...

  Can someone give me an idea?

  Thank you

  youchange wrote:
  So I want that the NXT somehow sent the data to the pc values.
  I don't know which is the best way to do it, if only with messages from BT, or with an excell file...

  Book by Michael Gasperi, "LabVIEW for LEGO NXT MINDSTORSM" has examples of both.  Chapter 15, it shows how write a program on the NXT that stores data in a file so that you have a program on the host computer, waiting for the file to appear and then it downloads on the PC.  On the NXT you just use open file for writing, write the file, close the file. On the PC, you use upload queue to the block of PC to get the data. You can also use the PC to control the NXT and say it starts running, etc...

  With bluetooth, you can use send/receive messages a message from both sides.