Length of list of radio button never ceases to increase - is this good?

Similar Questions

• List of radio button

  It's probably easy... How to do a list of radio button so you can choose more than one button in a list?  Thank you.

  Do not put the option buttons in a list

  Paul

• Length (number of elements) radio button group

  Hi all

  Can you help me please to get a radio group, for example the P2_RADIO, the number of elements in javascript.

  P2_RADIO is based on dynamic LOV and after refresh event, I need to check the number of items and apply logic.

  Also please help me to click on a first group of Radio buttons element using jQuery.

  Thank you very much

  Andrei

  You need DA [type = "when updating', selection ="your article"] and execute custom javascript that should look like

  elem var = $(this.triggeringElement);

  var radioNo = elem.find(':input[type=radio]').size();)

  If (radioNo > 0) {}

  elem. Find(':Radio:first'). Trigger ('click');

  }

  If (radioNo > 0) {}

  make a logic if more then 0 radio entered

  }

  the code written down without trial so he can have syntax errors. Please let me know if you need help more :-)

  Concerning

  Bartosz

  Post edited by: ostrowskibartosz

• How to make checkboxes instead of radio buttons by default

  Hi I am new to Adobe Acrobat Pro and I work with version 11 on Windows 7. I created PDF forms from Excel spreadsheets, and it works well except that the list of selections is converted to a list of radio button when I want it to be a list box. I found an online script that converts the radio buttons for the boxes, but I while you must go back and rename all fields in the box to make it work properly. Is it possible that I can have Adobe simply create lists as the default boxes or is it a formatting I do in Excel to indicate I want check boxes?

  It doesn't have the solution, but he has me on the trail of the rabbit to the solution. It caused me to labels in the form of Google led me to this guide. This guide also do not have the exact reason but by trial and error according to the instructions in the PDF file, I discovered the question: If a number is next to the check box, for some reason any Acrobat insists on what actually a radio button I added a letter in front of each number and Acrobat correctly it be termed as a checkbox. I couldn't find this documented anywhere however.

• radio buttons in livecycle

  How to set the properties of the radio buttons in adobe livecycle that when check us on one another will automatically gets uncheck.

  concerning

  UMA shankar

  I can look at your question simplisticly too. However, if you put two or more option buttons on your form in design mode, LC automatically includes the buttons so the default properties will click on a button and the other button will automatically uncheck.

  Display the preview PDF tab and test your form.  In addition, look in the tab of the hierarchy. You should see a list of Radio button with two or more radio buttons without a title in the list. As long as the buttons are in the list, you form should work fine.

• Small problem with radio buttons

  The form I designed is all complete, but the only question that I have is there is a list of radio button that gives me bad.  The list of radio button controls the presence of a section based on Yes or no.  After the selection is made, it works very well, but when the document is saved and reopened again as well the button Yes and radio are selected.  How can I fix?  Please help, thanks.

  Sorry, I don't understand - Group exclusion "drop-down.

  When you click on the exclusion of radio button group, is that the object > liaison palette should look like:

  

  Niall

• Radio button on dynamic Action of change

  Hi all

  I have an example of setting on apex.oracle.com

  Workspace: RWTEST

  username:testuser

  PW:test

  (Page 5)

  I have 2 test items.  We have a radio beside him group with'm ' for the disappeared and "N/a" for not not applicable.  The other has checkboxes with the same values.

  To simplify things, I just added a dynamic action that takes the value of the test points and multiply by 3.  However, when you click on'm ', the value should say 'cannot calculate.  This works very well for the Group of radio buttons and checkboxes.  However, for radio group, when you lorsque vous decochez uncheck'm ', the value is not recalculated. The value of the box is.  I know the option buttons are not supposed to be unchecked and I had to add a function in the html header to allow the radio button to be deselected.

  Can someone explain what to do if the value of the Radio says "can not calculate" only when am ' radio button is selected and why is this the case?  I guess it's something with the function that I have in the page header.

  Thank you

  Brett

  If I understand your post, you want to print 'cannot calculate' when the radio button is selected for "M" or when you uncheck radio button.

  To do this you must trigger DA After unchecking the option button.

  function changeRadio (p) {}

  {if(State[p.Name]&&State[p.Name]==p.value)}

  p.Checked = false;

  State [p.Name] = ";

  $(p).trigger('change');

  }

  else {}

  p.Checked = true;

  State [p.Name] = p.Value;

  }

  Returns true;

  }

  Concerning

  Bartosz Ostrowski

• The award of radio buttons to the signatories Echosign.

  I have a form of EchoSign, which must be completed by the signer1, but cannot be modified by the subsequent signatories. I put all the fields must be attributed to the signer1, but the default value of "Anyone", radio buttons and I can not change this setting.

  Hello Paula3869,

  You can assign the specific role of radio buttons according to the signer by double clicking on it and selecting role as E-sign of Signer1, 2 as needed. Here is the link for reference:

  https://helpx.Adobe.com/content/help/en/document-cloud/help/field-roles.html

  Kind regards

  -Usman

• masking of the radio buttons

  Well, I've been up all night trying to figure this on my own. no luck. I am a print designer (25 years experience) and I took a project aiming to create an interactive pdf form. on the overview of the form and I watch some initial lynda.com training, I felt I could face it without problem.

  And THEN, a customer has sent additional info, asking that some of the options remains hidden if other options were chosen. That's where I have a problem. If I understand correctly, this requires my java script writing. Oh my!

  I read some threads here and have tried to apply (with adjustments in the button names) absolutely without success.

  I have 2 buttons:

  key 1:

  General: Bill Type

  Options: radio button choice: Admission status

  below this selection is a table with its own set of option buttons (where they chose 1)

  in this table, there are 8 buttons:

  General: Admission status

  Options: radio button choice (there are 8 buttons here): 33 X 34 X, 12 X, 31 X, 32 X, 82 X, 81 X and others

  now, press 2 (which falls under the table of radio buttons):

  General: Bill Type

  Options: radio button choice: the claim status

  Tower is, if they are found by selecting the button 2, the table of 8 radio buttons above it needs to not be available... they shouldn't be able to interact with radio buttons in the table, but I don't necessarily want to hide/disappear.

  any help would be highly appreciated.

  This little experience up to now has made me realize just how easy it is I got it for many years to design print jobs!

  Yes, I understood that. So here's what you can do. Place this code as the MouseUp event of each of the main radio-buttons:

  updateStatus();

  And then insert this code in the form of script at the document level (via Tools - Document JavaScripts):

  function updateStatus() {}

  If (event.target.value == 'Admission Status') {}

  this.getField("Admission_Status").readonly = false;

  } else {}

  this.resetForm (["Admission Status"]);

  this.getField("Admission_Status").readonly = true;

  }

  }

• Radio - text field - radio button

  How associate you two radio buttons to work together when you need to have the text in the middle of the radio buttons? (below the first radio button there are two text fields)

  It's a fluid subform and everytime I try to "Pack in the new group of radio buttons", it moves the text fields below two boxes.

  • radio button

  text field for the text field

  • radio button

  Hello

  use a subform set, where you can also your radio buttons and textfields manually and put this subform in you flowed subform.

• Pop - up screen with radio buttons

  Hello
  I am a new on APEX and I have a requirement for the creation of the popup page with two radio buttons.
  It must be that this pop pop before the departure/homepage. The user must select at least one of these radio buttons and then it goes back to the start/homepage without condition.
  
  
  Thank you
  Manoi.

  Hi Eric,.

  OK - the user ended up with the login page and has not yet loaded page 1. Therefore, there is no page on screen, which is not possible :D

  What you can do, is something like the following:

  1. in your application, thanks to shared components, create an element of Application called, say, G_OK_TO_CONTINUE

  2. on your 1 page, create a new branch. The branch to this Point should be set "on load: before the Header ' (is the point before any rendered page starts). The page points to would be your "popup1" (except that this should probably be a normal page, instead of a popup). The terms section for this branch would have the following parameters:

  Condition Type: Value of element in the Expression 1. Expression 2 =
  Expression 1: G_OK_TO_CONTINUE
  Expression 2: 1

  3. on your "popup1" page, you should then have a branch that directs the user to page 1. This branch must assign G_OK_TO_CONTINUE 1 (use the "these elements the value" / "with these values" settings on the branch to do) otherwise, you create a loop.

  For example, when the user first connects, Apex trying to load page 1. The new branch is checked immediately and, as G_OK_TO_CONTIINUE is NULL at this point (and, therefore, is not equal 1), the branch will be triggered and the user is redirected to your page "popup1". They do what they can do on this page and, if you actually go to page 1, the branch back to page 1 sets G_OK_TO_CONTINUE to 1, the new branch on page 1 verifies this and because the condition is false, the branch is not triggered and the user goes to page 1

  Andy

• How to use the Radio button

  Hello
  
  In my form, I want the radio button.
  
  On the selection of this radio button user can change the status of "QC" for "STOCK".
  
  Initially, when he disabled status should be "QC".
  
  How to put this in my form guide me please.
  
  
  Maury

  Make a group of Radio (say RADIO_GROUP16) with 2 buttons radio (mean RADIO_BUTTON17 and RADIO_BUTTON18).

  Specify the initial value of Radio group to U
  Specify the value of Radio to R and U buttons

  and in the status field to write after outbreak.

  If: block. RADIO_GROUP16 = 'U' then
  message ("can not update status '");
  raise FORM_TRIGGER_FAILURE;
  end if;

  I guess that when you select the second radio button (with the 'R' value) then only you would be allowed to change the status.

  Please check the answer correct/useful if th answer was helpful

• jdev11 - how the code filter additional liaison with radio buttons?

  Using JDev 11.1.1.0.2, ADF BC for model, ADF Faces JSF to view, deploy to WebLogic 10.3 appserver, database Oracle 11
  
  I asked for help (a do my work ask), that I'm the only developer JDev in our shop, and I looked at this problem too long and now have obscured the problem. I don't really want the answer (rather the skills needed to solve this problem), but it will ;-)
  
  Installation program:
  ExecwithParam base where the logic is stored in the AppModule. At this point, there is only a single binding TechID variable, which is passed to four of your different and updates the where clause and calls on each VO of the AppModule executeQuery. Works great so far!
  
  Need:
  Add additional time based filter: Group of buttons on the Radio for the last 30 days, 60 days, 90 days, choose a date. If choosing a date is sΘlectionnΘe, then the user selects a date with a date picker, and all records by this date are used.
  
  Support:
  There is a date variable in each query, and a common type of DATE filterDate may be added to each to filter with somedatefield > =: filterDate in each VO
  
  Thoughts:
  I like to break things in simple parts, so how about starting just the radio button.
  My thinking goes like this:
  Add another variable of filterDate liaison to each of your. Add this to the App Module.
  
  So, how can I set up a radio button so that I can get the value of the selected and then button that convert a SYSDATE - value and which use th e App Module logic? I continue to think of the big picture end of case and forget everthing. I know that's not difficult, but just ask me for some advice.
  
  At one point, I was thinking to add a clove of support to the option button, then wasn't sure if it was the best way and don't know how I would get the value in the AppModule. Part of the problem is that I came across a mental block. If I add the components that aren't linked data, as a selector of dates, or checkboxes, radio buttons, etc.. How can I get the values in the AppModule? I've seen many examples of data to related components, but do not know how to mix and match the binding with just a rich component controls base such as an input control. (This may better ask in a different thread).
  
  Finally, what of the big picture, the part about the addition of the datePicker - of ideas?
  
  Like cable TV, characters hosted - the kind that are related in my case the code! (Reference of American humor, must be familiar with USA cable TV channel (I'm addicted to the show House))
  
  Thank you, Ken

  Ken,

  A small correction to your last sentence - you don't want to refer to the support of the AM bean - you want to refer to the AM of the bean to support.

  If you want a very simple way: find the service for your AM method in the data control palette, drag-and - drop it on your page as a button JSPX. JDeveloper will automatically add a binding for the action in the pagedef. Then, double-click the button that results and create a new method of bean of support for her (in front of JDev, don't remember what we call the dialog box) - given the option, say JDev to put the code to link to you - then the resulting method should have the code that calls the method via the definition of the page. Simply add a bit of extra code to determine and set the date.

  John

• 33 Firefox works only with Amazon Wish List radio buttons

  On Amazon.com, if I click on the option button "Add to wish list", my wish lists list doesn't go down for display and selection. Instead, the item is added to my wish list default (I have several wish lists). Within any given wish list, radio buttons 'Move' (to another list of wishes) and 'Delete' does not work for any item in the list. This does not work on my system (Win 7; 33 Firefox) if I use (God forbid!) Internet Explorer.

  This happens in Firefox Safe mode? If this isn't the case, it can be a complement on. Questions to troubleshoot Firefox in Safe Mode

• CHECKED radio button disables never

  Hello

  I'm developing a portal based on a browser for the management of field technicians. It is mainly designed for navigation on PC, but I have to make sure that parts are working on BlackBerry "BOLD (9000 /" ")."

  The problem I have is that I have a group of four option buttons, which one is CHECKED by default. On the BlackBerry, I never have to uncheck that, regardless of which radio button is selected by default. If I don't by default not he checked, all radio buttons work fine.

  It works well on other browsers - but not on the BlackBerry.

  (my version of the software is v4.6.0.162 (Platform 4.0.0.155))

  Here is the HTML source on Firefox (you can see option 1 is checked):

           Update Your Status          
      
           Select new status:
  
                 
                available      
       
  
             
  
           enroute        to incident       
  
               
  
              SJ030002                        
  
         
                                   working on incident                          
  
              SJ030002
  
                               Lone worker on site?                  
  
       
  
  
                  unavailable                        
  
           
  
    
  

  Html is a little different on the Blackberry using ALT - RBV, but I couldn't understand how to retrieve the source from there!

  I'd appreciate any help - it's driving me crazy!

  You can publish this Web page somewhere and give us the link?
  It'll be easier to debug.

  In addition, don't forget that your document is HTML 401 compliant using http://validator.w3.org/