Lenovo black screen randomly Y50-70 times

Similar Questions

• Black screen randomly on the Satellite A200-10 x

  Hi, recently my laptop started giving me a black screen for like once a day. Now, the past 2 days its been quite... 4 times this morning! The symptoms are: black screen + DVD drive LED lights up and stays like that. So, I stop it manually.
  Sometimes he does once again as soon as I load Vista.

  There is no specific request which is the cause as it happened all through my emails. I have updated the BIOS VGA drivers and too.

  I don't think that it's an overheating problem because he never gave me problems before, and compared to other laptops, it becomes not that hot.

  It is still under warranty, but it is so random, I just hope that the technician will say just that its nothing. Any ideas?

  Thank you

  Eric

  Hello

  Have you tried an external monitor to your laptop computer? If the external monitor works properly I think that there is something wrong with your internal LCD. Maybe it's s inverter a FL issue because this part control the backlight of the LCD screen.

  In the worst case, there is something wrong with the motherboard or graphics card but an ASP is able to help you. The laptop technicians can check your laptop and share the material if it of necessary.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Welcome them

• 6 s iPhone restarts with black screen randomly. However, the system always restores the same question.

  I have an Iphone 6 s 128GB. The iphone automatically restarts with black screen and there is no particular application I use when it crashes.

  I did a system restore twice but still the same issue. Could someone please help?

  If the restore does not solve the problem, it is high time to take your device at the Apple Store for more diagnoostics. This may be material / display problem. Good luck.

• 2305 Dell all-in-one - black screens random

  Model purchased Feb 2011. Good reliable system, however in the last 2 weeks, after coming down from system, it crashes on black screen after sitting idle for 10 minutes about. He turns not off - just goes to black. Then I have to turn it off. When I go back to the task, I restart and all right until I get off system and then 10 minutes later, the screen goes black.  I would like to look inside to check the status of the dust, but not sure whether or not the back detaches. This sounds like an overheating situation? Maybe I should run the diagnostic on it. Any thoughts would be appreciated.

  

  Configuration of the system (BIOS) update

  www.YouTube.com/watch

• Turning to black screen after the value time/RAM used FireFox

  Hello

  My question is for the graphics. It lasts for several months now and he came to a point where it starts eating away at me.

  I installed recently (within 6 months) 16 GB of RAM and a new extra GPU. I upgraded to an ATI Radeon HD 5750 to a Gigabyte Radeon R9 x 270. I never had this problem with my 5750 card, so that initially led me to believe it was a card problem, until I discovered that my problem seems to be ONLY with FireFox.

  Now to the question: arriving to 2.8 GB + of memory used (according to Task Manager), FireFox flashes for a brief moment and to scroll the screen or between tabs, becomes completely black, forcing me to re - load the browser. Now the first question of the use of FireFox, so initially, amount of RAM is crazy, and I tried to lower the settings by disabling extensions, all sorts of things and the fulfillment of the only thing that is extend the time before flash made his boring appearance.

  The screen flashes problem seems to be quite something else. I tried to upgrade to the latest version of FireFox, run a new installation of FireFox, update my graphic drivers their latest versions, just about everything I can think of, and nothing seems to fix. What seems to be the problem here? I would be very happy all feedback and better understand how I can solve this problem outside hard using a different web browser.

  Hardware specifications:
  Motherboard ASUS P6X58D
  Intel Core i7 930 @2. 8 GHz processor
  22 GB of total RAM (3 branches of 2 and 2 strips of 8)
  Gigabyte Radeon R9 270 x GPU
  Brand/model unknown 850W of power (honestly, I'm just too lazy to remove the top of my tower which is packed in a locked drawer to figure out the make and model at display time)

  Running FireFox in safe mode seems to have solved or at least slow the excessive RAM issue however FireFox has now terrible performance much earlier. Adding constantly freezes and scripts constantly crashing, it would seem that addons and extensions that I ran helped to solve these issues.

  What I do now is to reload firefox standard and turn my extensions one by one to see which seems to be the cause of most of the points in the use of the ram.

  AdBlock Plus seems to so far be keep stable FireFox without problem. Going to turn in my next toolbar. Will edit this post more information after having observed the behavior of FireFox.

  Edit: The reason to believe it's my toolbar like with AdBlock plus, FireFox was still around or less 1 GB to use physical RAM. After the reactivation of my toolbar, I jumped up to 2 GB. Contact the developer of the toolbar soon.

• Lenovo black screen x131e

  My lenovo thinkpad x131e was "idle" mode and when I opened it I hear beeps and my screen was black I forced to stop and now the same thing is happening it will not show screen and it beeps please help I can't do anything without it... It has all my work on it...

  I found the problem, that I opened my laptop inside and I saw dust and I blew and then I turned it on and it worked

• My macbook pro retina boots to black screen. It does not reset the PRAM.

  My MacBook Pro (15 "Early 2013) retina will have a black screen randomly. It won't restart and reset PRAM does not alter. To do this, the startup sound, but that's all. In addition, hang on to an external monitor does not display. Is there something else to try? It's a new OS (El Capitan).

  Some things to consider: the battery can be 10%, 50%, 100% is not bad, the computer starts after being off for a long time (2-3 hours).

  you have GPU failure

• Difficulty for nvlddmkm.sys Black Screen Of Death

  I think I finally found a solution for the black screen of death bugs nviddmkm.sys and all the latest drivers Nvidia.  It works on my IQ816 with NVIDIA 9600GS, this should work for most TouchSmarts who have black screens randomly.

  It is a free utility called RivaTuner which works with Nvidia cards.  You can get it here:

  http://downloads.Guru3D.com/download.php?Det=163#download

  Follow these steps:

  Install Rivatuner.

  Click OK when it gives you the box of not being a supported card or whatever.

  On the screen that appears, click on the small icon next to customize it's under the driver settings in the middle of the screen.  Then click on the map icon.  It looks like a video card and should be the first icon on the left.

  On the screen of the base clock, click the check box at the top to allow.  Click on detect when he asks.  The value of the drop-down list on the right to 3D.  Then set the clock of kernel to 550 or as close as you can get to it.  I had 551.

  You can check start with Windows or to wait and see if it is correct, and then return to the screen and check start with Windows.  Who will ensure that the setting will stay all the time.  Otherwise, it is just to the original settings.

  Click OK.  And it should be.

  If you need help, watch the video tutorial about it here:

  http://www.YouTube.com/watch?v=NU8_EMjSUf4

  So far, since I did that, no black screen at random death.  So this can be.

  I am pleased to announce, this was the solution for my plant video.  I got not a single accident because I did.  RivaTuner saved.  My pc works perfectly now.

• I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen

  I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen randomly with the screen turned on (I mean everything is black and I can't see a thing, but can still see the light of the LCD screen). This often happens when I open/close a window, browsers web example, the records, or even during the boot. I want to know how to solve this problem and if the upgrade to Windows 10 works for her.

  Hi Haolin,

  Thanks for posting your query in Microsoft Community.

  I do not understand that the screen goes black randomly, and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time it worked?

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Step 1: Reinstall your video driver

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click file, and then click new task (run).

  4. In the text box open, type explorer.exe, and then click OK.

  5. Click on the Start button , go into the Device Manager in the start search box, and then, in the search results, click on the peripheral Manager.

  6. Double-click on display the cards, right click the display device, click Update driver software, and then follow the steps in the wizard that appears. You can also visit the website of the manufacturer of the computer support and install the latest available graphics cards for the same model of computer you have.

  Note: After the driver is re-installed, you may need to restart your computer to complete the installation. You may also need to adjust the resolution of the display to its previous value. For more information, see change your screen resolution.

  Step 2: Search for registry problems

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click fileand then click new task (run)

     In the text box open, type explorer.exe, and then click OK.

  4. Click on the Start button , type regedit in the search box, and then, in the search results, click on regedit.exe.

  5. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  6. Click to select the WinLogon key and then in the right pane, click on Shell. The value of shell in the data column must be explorer.exe. If the value of Shell is not explorer.exe, double-click Shell, and then, in the value data text box, type explorer.exe, and then click OK.

  7. Close the registry editor and restart your PC.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  If this procedure resolves the issue, you are finished. If this is not the case, proceed to the next set of steps.

  Step 3: Start the computer in safe mode and run system restore

  1. Click on the Start button , click the arrow next to Shut Down, and then click restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. In the Advanced Boot Options screen, use the arrow keys to select Safe Mode, and then press enter.

  4. Log your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  5. Click on the Start button , type "System Restore" in the search box, click System Restore, and then click Next. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. Choose a restore point when your PC worked as expected, click Next, and then click Finish.

  7. Restart your computer normally.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  If these steps resolve the issue, you are finished. If not, try to repeat the steps and chooses an older restore point (if available). If that does not resolve the problem, contact your computer manufacturer or the technical support for further assistance.

• I get an intermittent BLACK screen & lose control of system for about 45 seconds that any return to normal, this happens about twice a day

  This 'Black' screen happens at any time of the day or night on the internet. I use Firefox and Windows Explorer.
  The downtime is generally 30 to 60 seconds.

  Hello

  1. what operating system is installed on the computer?
  2 have you made any changes to the computer before the show?
  3. the problem occurs with any particular Web site?

  I suggest to start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

• HP Pavillion 11 x 360: black screen after login

  I recently got my x 360, used for about a month, go to turn it on, boots fine then I connect, and it goes to a black screen with the cursor, can not do anything except ctrl alt delete, then Task Manager, nothing works, it's just a white, black screen
  I restarted several times without success and becomes very annoying.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When system restore interface has loaded, select a restore point at least 48 hours before this connection problem occurred first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• black screen shown before loading an html file big bb10

  Hello

  I have a problem here,

  I'm loading 2 in HTML format as part of my application.

  1 index.html with a video that plays first.

  2. after index.html I load on end of video game home.html.

  problem is here, before index.html load I use rim: splash in bb10

  After index.html, before home.html loading I get a black screen, because it takes time to load home.html as home.html as many sections and loading js files.

  How to avoid this black screen before loading my home.html.

  Please help me.

  by moving the video as a topic home.html tag you can solve this problem :-)

• XPS 8700 - black screen before you get to the screen of Windows 7. Help please.

  Hello. I recently bought 8700 XPS, replaced the 550W PSU and video card MSI GTX 660.

  The problem I have is the booting takes too long, almost 2 minutes. I see the screen black for about 1 minute before it goes to the screen of Windows 7.

  I updated the driver vga for later and others through dell system detects as well.

  What should I do to get rid of the black screen and reduce startup time?

  Boot in the Bios F2. Go to start. Boot USB support is set to disabled? If not, change it to disabled. Press F10 to exit the Bios and reboot.

• L220x random black screen

  Hello! I have a serious problem with my L220x new and this forum is kind of my last idea to look for a solution. Maybe someone can help...

  Apparently randomly, I meet the following (from the office, the video games, full screen)...

  1 several times per day

  -l' screen goes black for about 1 second

  -the Office returns

  -the mouse pointer has made a leap toward the center of the screen

  -the processor load is 100% for a few more seconds

  -Repeat a random number of times (~ 10), then everything continues to be calm

  2. on every two days

  -(1) which happens, but ends with

  -l' black rotating screen for about 3 seconds

  -windows playing material 'disconnected' sound

  -and then the sound "connected equipment".

  -If I have my TV attached, the display with 1024 x 768 and display my TV as primary (!)

  -If I have the TV that disconnected, the screen comes back as usual

  3. once in the last week

  -(1) happened

  -l' black screen turned

  -windows has played the sound "hardware disconnected."

  -l' screen remained black. I was able to stop with soft-off windows, after reboot, everything was normal.

  I have already tried a bunch of things, tinkered around card drivers and graphic screen, and finally, reinstalled windows (for several other reasons, too), but the problem persisted. Does anyone have an idea?

  My system:

  SP1 of Vista Ultimate x 64

  Radeon HD2900XT (from Gecube, 'BuiltByATI')

  Connected via DVI L220x

  CRT TV connected via Composite

  L220x as main display, TV turned off with CCC

  all drivers up to date

  Thanks for all your suggestions,

  I wanted to just let know you that I found a solution to these problems. It turned out that they were caused by ATI external Event Utility service - I disabled it, finished.

• Black screen after updates of Windows 8.1 - No. Cursor (Lenovo 50-75) - and gets hot

  Dear Forum,

  I have a new Lenovo Z50-75 with FreeDOS: I made a Windows 8.1 installation, and everything went well.

  After installing the approximately 70 updates - at one point it restarts and I get a black screen, just after few see the Lenovo Logo (enter the BIOS works).

  It is not all Windows start - I can't get fashion so safe, and I don't get any cursor.

  The behavior is reproducible, 2 times. Also when it crashes at the black screen, the van get reall busy, Levy and the laptop gets hot.

  Anyone working on this issue, or has any idea what should I do?

  Thank you

  Robert

  Updating the BIOS is not always my first option (risk, performance vs).

  Anyway... It works, everything is good.