Lenovo P780 back camera is not working after firmware update

Similar Questions

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt

• AS100V - does not work after Firmware update

  Hi there has anyone else had this problem? I was at half way through the update of the firmware v 2.0 and then the installer said there is a mistake and to reboot, so I did, and now all I get is the red light on the back of the camera. I tried to reset the camera, but nothing works. Everyone knows this? I am very angry that I'm about to go on vacation and need the camera. I wonder if Sony will replace it for me in the store? I bought at Singapore Changi Sony Center, but I live in England any help would be appreciated.

  Let me guess, you have used a Mac to update your camera and activated windows while she has been updated?

  Simply pull the battery, reconnect it, start the update of the firmware software, plug in the camera and click Next through the software, it will restart the update process. Now, here is the part MOST important - don't do anything on the computer while the process is running, only web browse don't go home away from this update window. It will take 5-10 minutes, but it will work I promise you.

  The camera does not light until you have completed the process of updating the firmware.

• The airPort Extreme is not working after Firmware update

  Hello

  At our office, we have several AirPort Extreme or TimeCapsules and one of them (AirPort Extreme) stop working properly after the update 7.7.7

  The update itself is supposed to be ok and we have updated all our stations but it only seems to not work. I have hard and factory reset and somehow until last month worked more less, but from this week completely stop working and even reset does not work.

  I already ran out of ideas and it seems that Apple wants to charge me $ 30 for a phone call.

  Someone at - it a similar case? Should I take on the Apple Store?

  Thanks in advance for your help.

  You can get it replaced if it is less than one year... That is to say in the warranty or if you have any computer or ipad or apple TV which is covered by the applecare will also cover the airport up to 3 years old if EI is less than 2 years, you can still buy applecare on a product calling... or you can buy say an apple TV and buy applecare for it.

  If Apple do not repair them. only, they will be replaced.

• WiFi not working after firmware update

  I have MB612 XPRT. Recently upgraded to the version of the firmware 4.1.110.MB612. Sprint.en.US

  After the reboot, the Wifi does not work. It gives "Error" when I try to activate it via the parameter-> & wireless networks

  Can someone suggest to restore the functionality

  https://Motorola-global-portal.custhelp.com/app/answers/detail/A_ID/77896

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• 32TL933 - in places of Toshiba Youtube app not working after firmware update

  I started having a problem since the latest firmware update on my 32TL933.

  Everything worked fine until the latest firmware update.
  Since then, when I connect to Toshiba Places, everything works well except Youtube.
  When I try to access Youtube, it shows the Youtube Logo and stuck on it...

  I would appreciate if someone tell me how can I solve this problem. YouTube are the only thing that I used in places of Toshiba, and now, I can't, it's frustrating cause I have this TV since August!

  Have you tried remove the Youtube app, and then add it again?
  Try this!

• HP Pavilion dv4 Web Cam does not work after last update SP2

  I downloaded the latest drivers from the HP website, but still no luck. Web cam applications says cannot find a camera.

  Nasir.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 on the link for your Webcam with SP2 problem.

  See you soon.

  Mick Murphy - Microsoft partner

• External storage does not work after firmware update

  I've updated my ix2-200 for the latest firmware. After that, my NAS does not detect the external hard drive when I connect to it. I need to plug in the HDD and restart the NAS, this way to detect the SIN, but is not a good solution, because maybe someone is its access to the NAS.

  With the old firmware, I connected and disconnected the external drive without any problems.

  Is there a solution? If there is none, is it possible to Flash an older firmware?

  You can check your status here:

  https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/14431

• LaserJet Pro M1217nfw not working after firmware update

  Hello

  LaserJet Pro M1217nfw connected via USB to the MacBook Pro (non-retine, mid-2012) running OS X 10.7.5

  [Already posted this three days ago, but no solution - Experts hope sounds...]

  A few days ago, I downloaded and installed the latest version of the HP http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg software

  The installation goes OK, then asked the installer to update the firmware of the printer and I said yes. The installer of the firmware reported success, but now the printer will not be in service more. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline".

  What should I do? Is it possible to re Flash the original firmware? An updated firmware supposed to break things like that anyway?

  Thanks in advance for any help.

  Marels,.

  That's what I did:

  Hold [Cancel] and [right] button (there is no [down] key on the M1217nfw)

  Put the unit on

  Indicator light flashed and LCD displays "Permanent storage init" (whatever that means)

  -Ready light has stopped flashing and LCD asked "language?

  Out buttons and proceeded to the initial installation of language and regional

  LCD displays "Ready" - printer working again!

  Thank you and Kudos to you and MBJustice for your personal commitment.

  DG

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  Mhefzi86 wrote:

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  OK, thanks for sharing.

  Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• AutoFill does not work after last update 3-6-3

  AutoFill does not work after last update 3-6-3

  is after update

  See control if Firefox automatically fills in forms

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems