Lenovo S90 restart - U during loading and after loading
Hi all
I had loaded my Lenovo S90 - U of the overnight yesterday while l was that l had realized that the phone was asleep reboot several times during loading and after loading at 99%. My phone is not switched off since l had the phone and my wifi is all the time. He had to kind of wake me up my normal alarm of time, what is the problem here? Is there a solution to this issue?
Of
Mr.Koh.
Please use included original Lenovo charger and cable to recharge the Lenovo S90 you and not use your own charger & cable to load goal. This solves reboot during loading and after loading for me.
Tags: Lenovo Phones
Similar Questions
-
I was somehow infected and after restarting the laptop, it goes to a white screen.
Original title: Virus
I have an old HP Pavilion 2008. I was somehow infected and after restarting the laptop, it goes to a white screen. Not even the HP logo lights up. I can't access installation even though I know which key press.
I created a bootable windows DVD 7 and a USB port. I can not even boot from one of them. With the DVD, it sounds like it wants to read, but there is something else wrong.
Any help would be greatly appreciated.
If the HP logo comes and you can't access BIOS, the problem is more likely to be at a lower level. A failed HARD drive should not prevent you from access to the configuration.
Several things can cause the logo appears at the top (I write from a HP Pavillion 2008). I've dealt with many laptops such as yours and have seen many causes. Faulty RAM memory is a. A problem with the video chip is another. In fact several kinds of tokens (two bridges, video..). A virus is more unlikely but not impossible (if he messed with your BIOS, it is possible).
If you don't see movement in your DVD or HARD drive, something I'm leaning more towards the video chip. Especially if it's Nvidia or Radeon - it would be a miracle if you use an HP laptop of 9 years with a powerful video (so that there is time) without having had any problems with it until now (mine is Intel). They overheat easily.
What I would do in your case:
1. remove the battery and unplug the unit. Give it 10 minutes and see what happens. Small chance, it would be useful, but it's easier to test.
2. If you are reluctant to remove anything yourself proceed to 4. Otherwise, open the case and look for a reset (might want to read in the manual how to do it), remove the internal battery.
3 try to remove the first (try to run) then the other of your plates to RAM (assuming you have two). During the race, all the tests remove the drive HARD and DVD just to eliminate the possibility of interference. If you manage to get started and get the logo and enter BIOS start adding parts back one by one and you will find the faulty one.
4. If it at a gas station. Now you can do anything, if you can not enter BIOS so it must be a hardware change.
-
During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit
These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.
If they are not ads, can you think anyway that they are related to the sites you visit?
In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.
-
When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.
Hey Abdul HamidNagoor,
· Did you do changes on the computer before the show?
· You get the error message?
· What is the brand and model of the computer?
Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
If the problem persists, follow the steps in the article.
How do I recover from a corrupted registry that prevents Windows XP startup
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
-
Wireless
I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.Hi Zeljka Djordjevic,
· What program did you delete?
I suggest to perform a restore of the system and check if the problem persists.
How to restore Windows XP to a previous state
-
Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.
It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.
Hello
Restore the system from the recovery console and check.
-
Hi all
system information: HP DV6 LAPTOP, windows vista sp1
When I try to install windows vista sp1 disks/recovery partition that I get the error recovery manager prompting me to choose either to see the details of the failure or restart: CTOERROR.flg as a Notepad on my desk. I did try 100 times but nothing helped. I can't restart after this recovery failure message because it shows the dialog box when restarting: windows security update is not properly installed or is not approved. So, I have to go through the process of recovery again to see the desktop (any operation - music video, internet, all), but only once.
The last time I got this message too. When I did the windows installation of recovery a few months back discs, this time I figured out to install all updates IMP to automatic update via update of windows. All updates have been installed successfully, then it restarted and gone through the process of language settings, time settings and everything...
But this time when I'm trying to update windows, I get windows update, error 0 x 643 which is updating security for .net Framework 3.5 sp1 and update family. I don't know the answer how to exit with this error "windows help" and also this forum too, which asks for the installation of the updates of the .net framework from the windows update site directly. But the problem is:
Updated Windows ask me to restart windows automatic or manual update installation takes place and restart causes problem because it shows the dialog box - windows security update is not installed successfully. I need to install all updates at once like last time of my understanding. :
1. so, if I install the update to windows (to try my luck as last time) it says error 0 x 643 for .net framework and you ask to reboot, and after that when I try to manually install failed 0 x 643 updated it asks me to restart windows for pending updates.
2. in the alternative, if I try to install the update failed everything first just after the failure of the recovery it doesn't allow me to install important updates for vista sp1 and asked to restart windows.
All I need is to update all updates via windows automatic update that is not happening at the moment.
Not even be able to upgrade to sp2 bcz it also restarts for installation.
Help, please.
Thanks in advance.
Hi harry973,
Download Service Pack 1 will not convert in a disc in Windows Vista Service Pack 1.
A recovery disk will not be useful to perform an Inplace upgrade to.
You will need the original Windows Installation disc.
If the disc that came with the computer, then it would be a drive OEM (manufacturer). This disk can only be used for a reinstallation of Windows.
Hope this helps! -
using vista. Auto starts to day and after that windows automatically restarts.
using vista. Auto automatically updates FRO NET and after this reboot of windows. anyone can suggest some soln
Hello
1 are the updates installed successfully?
2. do you get notification of restart?
You can change the settings and decide when to install updates.
a. Click Start, type windows update and press enter
b. click on change settings
c. under important updates select download updates but let me choose when to install them.
-
I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?
If you have downloaded from here: Download CS5.5 products, please see the instructions to extract the files and install your product.
Alternatively, you can download it here:
http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html
Guinot
-
Adobe send the encrypted files before, during and after the transmission?
Adobe send the encrypted files before, during and after the transmission
Can you explain this?
-
Generic host win32 problem...
HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, pleaseHello
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Follow the steps in the article.
How to troubleshoot a network home in Windows XP
Windows wireless and wired network connection problems
For reference:
-
When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are
(1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...
what I've done
I did a key recovery... even I am facing problem... Please tell me the steps to fix
Original title: DESKTOP PROBLEM
Hello
Check with Lenovo support, their drivers and documentation online and ask in their forums
on known problems.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.
=============================
More troubleshooting if necessary:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those with Dump in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer. I use V10.11.3. An idea about what is happening
Hello mpm068,
Thank you for using communities of Apple Support.
Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Take care.
-
Lenovo S90 - A, I can't find security
Dear,
After that I bought the S90 - A Lenovo, I found an application as a basis of security on the system application and after an upgrade of system I lost him I can't find any, and it was a nice application and gret
How can I get it back?
please me tips
Thank you for having accepted the forum and share your experiences and tips with other users of the S90. Unfortunately, from the Android Lollipop the security App updated Lenovo has been abandoned. There is no application security more on lollipop, due to a number of reasons (like Android has a different functionality or users complaining that they wan't a different antivirus). Several app security features was moved to all kinds of menus all around the phone, so it will be quite difficult to find, but some of them are always available somewhere.
-
black screen at startup and after logging
I have this problem for a few weeks.
When I start my pc, when windows xp starts to load sometimes it appears a black screen, nothing else.But sometimes win xp load success and after I have connect it reappears, black screen.I tried to find a solution for this in google, but nothing helps, it makes me angry.She sucks can anyone help me on that I would appreciate it. Thank you!!!We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.
http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303
http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the contents of this folder
Please, upload to skydrive or a file sharing service and put a link to them in your next post.Go to start > search/run > cmd > msinfo32 and include it in the upload
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files
http://www.osronline.com/article.cfm?article=545
Maybe you are looking for
-
Why not continuous playback between folders?
Why should I choose Play All if I want such a function? Very irritating given the multitude of files and you want to choose this path in the middle piece of record and to have at the beginning of the first track in the first folder. Thank you!
-
Please ihave problems insalling updates
ICAN, t update my windows
-
HP Pavilion Notebook incompatible with processor AMD PHENOM II N660 g6
Hello I'm having a problem with the upgrade of processor in my laptop. Product name: HP Pavilion Notebook PC g6 Product number: QJ283EA #ABU The processor I bought is an AMD Phenom II N660, which is supposed to be compatible according to this pdf: ht
-
Hard disk problems on Inspiron n4010
I am facing problems with my internal hard drive, and I'm not able to reduce at the source of the problem. It started when my laptop has suddenly stopped responding. Connect to the console text given ext4, read error. I restarted the system after a f
-
I have redownloaded photoshop elements 12 but it wont let me reactivate someone can help?
I rebooted photoshop, but it won't let me not I don't have access to the old computer.