Lightroom Import scanned JPG Images

Similar Questions

• Having problem importing scanned jpg ScanCafe

  I had a few old photos scanned by the company ScanCafe.  Loading 5.4 LR it to load, but when you click on the thumbnail to expand.  It has an exclamation point and give message, Lightroom has encountered problem reading this photo.  This same photo not upload to Flickr, to get the message there is no file to download.   But jpg will be in Facebook, SmugMug or Photos from Google.   I think it's the jpg, the problem, but society says this isn't their jpg files.

  I have attached a link to the might of jpg photo you can illuminate why this jpg can be imported into LR 5

  https://drive.Google.com/file/d/0B6LiH8v7ilrGM1NMcTZUanRUdFU/edit?USP=sharing

  I'm not a real computer tech, so it probably won't be much help to you. I met the same problem as you did. So I opened then the file in Photoshop, made a slight adjustment of brightness. Then, I saved and closed the image. Then I imported into Lightroom again and was able to work with it in Lightroom without any of the error messages. He looked like he did when I'm done using Photoshop. I don't know how to tell you to set any other way. If you have Irfanview, you could try that. Or, if you have Photoshop/bridge and know how to use the image processor you could process images by batch and save it back. Then try to work with them in Lightroom. Either way, when I first opened it in Photoshop, I received a message that the file may be corrupted or truncated. But I clicked on the button continue and got the results I described.

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• I use Lightroom CC and one of my cameras is a Canon SX-50HS. Why Lightroom importing crop images? It does not perform this task for any image created on other devices.

  Automatically import the cultures these images, Yes to develop I can uncrop them but I would have preferred that the images come shot.

  You can set this camera to various Image Ratio - 1:1, 5:4, 4:3, 3:2, 16:9

  You set your ratio desired for JPG images.

  Lightroom imports the image of full 4000 x 3000 sensor size (4:3) and applies to the culture according to 'Camera' Image ratio (16:9, perhaps).

  Set camera Image ratio 4:3 in the menu of the camera and you have the problem of harvest.

• How to stop Windows 7 opening 'imported photos and videos' after each scan an image?

  I'm scanning multiple images and after EACH scan, Win7 opens a new window "Imported pictures and videos", despite the window being open 20 times already...
  
  In the import dialog box, deselection 'Open Windows Explorer after import' has no effect.  After each import, a Windows Explorer window appears showing me that the directory of the file has been imported to (i.e. "imported photos and videos").  Worse still, this happens even if another this window is already open - so if (for example), I scan 10 pictures, I have 10 windows explore open all showing this same directory (unless I close them I will).

  It's boring, clutters the taskbar and takes expire have to close each window - how are we going to stop Win 7 "Imported photos and videos" opening after each scan?

  Hello Carl,

  You attempted to change the option to "Open the Windows Explorer after import" while connected as another user on the computer to see if the problem persists?
  Also, have you tried to scan using a different computer to see if we can isolate the problem to a machine?
  If you have checked these things and the behavior has not changed, I suggest to leave feedback for the Windows team at this link as an option behaves as expected:
  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

• I open Lightroom import images from an SD card move to develop and receive a disabled development msg module.

  I open Lightroom import images from an SD card move to develop and receive a msg saying that develop the Module is disabled.  Close lightroom, reopen and sign in.  I am registered and every time I close lightroom and open again, I get the same msg. What am I not doing?

  What mistake you found is because of permissions problems. Check out this link.

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Setup cannot write files in a certain folder because it is marked as a system folder and your username does not have write permission.

  The latest version of Lightroom is CC 2015.3. LR CC 2015 is out for about 9 months with 5 updates, 1, 1.1,.2,. 2.1 and maintenant.3.

  Clearly, you have not a newer version. In fact, you're 6 behind, communicated LR 5.7.1 and 5 that I posted above.

• Why can't I import camera raw images in lightroom 5.7.1?

  Why can't I import camera raw images in lightroom 5.7.1?

  Yes

• I need an answer to be able to open a scanned doc (via my network printer) to my "Adobe Reader".  Get a message "Adobe could not open" jpg image (4) because it is not a file type supported or has been damaged... "" "Don't know if I really need

  I need an answer to be able to open a scanned doc (via my network printer) to my "Adobe Reader".  Get a message "Adobe could not open" jpg image (4) because it is not a file type supported or has been damaged... "" "You are not sure if I really need Adobe acrobat program to open it?   Get! $% ^ & * ing frustrated that this now has me consumed about 2 hours!

  You can open JPG files with an image viewer.

• How can I prevent imported jpg images going soft first elements 11?

  I have several graphics in the form of jpg images that have strong air in my editor (Corel PhotoPaint), as well as the Windows Viewer. But when I import premiere elements 11, they get pretty sweet. Any suggestions on how to avoid this would be greatly appreciated.

  Thanks to you and John Smith. The size was the issue. For reasons too esoteric to go in, the jpg files were much larger that they should be. I have their re-sampled in Corel PhotoPaint and decreased the size (but not the CIO) of 75%. Who did. Interestingly, before I made the change, I have noted that none of the giant files would play in the clip viewer... they just came up as a draft. It is another indication of the problem, and it disappeared once I have shrank the files.

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Poor quality of export of raw to jpg image

  I have recently switched from Aperture to Lightroom and am generally impressed.  However, I noticed a few problems in the export of images in JPG format especially noticeable when it comes to portraits on dark gray background.  You can see a few important and noticeable "scaling" in the background.  , I work on a MacBook Pro.  I know that it is a function of the algorithms Lightroom uses to compress the image and generate the JPG file

  I played a bit with file setting quality and image resizing in the export module and can reduce the effect, but it is always present.  I tried to work with the same image on the PC of my mother, using his 5 Lightroom and can not get the same effect.  The attached picture was not resized, but the quality is reduced to 50.  If I work quality at 100, the effect is reduced but still present.

  In conclusion, to export I get a crispy JPG image in Aperture and Lightroom 5 on a PC, but get serious distortion when exporting to jpg in Lightroom CC on my Mac

  Someone else has experienced this problem and / or know how to fix this problem?

  

  Mac image has been heavily modified with the white balance different, grinding lower, higher noise, lower saturation, Spot Removal tool and probably other settings. The image of PC seems to the "default parameters of development, which are quite different from the image of Mac processed. Since the unprecedented image of PC has not the development parameters, you used the image of banding Mac are causing the problem. This is why I suggested showing the original edited Mac image as a DNG on Dropbox export file, allowing us to see the picture with your LR settings.

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• Scanning multiple images at the same time and you want to save everything in a single file, not separately

  I have the HP Envy 4500 model.  I also have a Windows 7 OS, HP.  My problem is that I put for example five images on the glass for scanning and I find myself with five different jpg files when I want all five images on a SINGLE scanned jpg file.  How to achieve this?  Thank you!

  Hello

  Please use the scanner software on your computer.

  Kind regards.

• My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

  My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

  Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

  Ok. So, the answer is certainly: Yes, it is possible.

  The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

  Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

  When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

• I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nik

  I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nikon cameras do not. Everyone knows about this problem?

  Looks like you are applying (accidentally) a "Preset" for these photos. Make sure that there is no preselection specified in the import dialog box, and the first (bottom) in the history of develop does not list a preset.