Limit the number of records in the PivotTable
HelloHow can I display only first 10 runners in a custom report?
Thank you.
Hi Luis Simioni
It is very very very simple.
Select the State of the active or active history
Include columns, the name of the account, active, quantity and once again the amount.
In the fourth column of quantity, please apply the formula (partially fx) RANK ('-quantity "." ") Quantity per account. The account name')
After the application of the formula, you select the filter lower at 11.
You can hide the fourth column.
The RANK function would rank each asset based on their quantity. We apply the sentence per account. "" Account name " while the ranking is done separately for each account name. We then apply the filter under 11, while only 10 records are displayed in the report.
Once the number of records is limited, then you can apply the pivot accordingly and get the result.
Let me know if you are still facing problems.
You can send me to [email protected] for any question.
Kind regards
Paul
Published by: Paul-CRMIT May 19, 2011 11:17
Tags: Oracle
Similar Questions
-
How do limit the number of records in a PivotTable?
I could help limit the number of records that shows a dynamic array without display error display error
Thanks for the helpHello
Assign Points if answers helped.Concerning
Srikanth -
RTF: limit the number of records get printed in a page...
Hello
You can me please how to limit the number of records get printed in a PDF (model XML) page.
I have model with a table in it and want to restrict to print only 5 records per page in the table.
Pointers? Help, please!
Kind regards
Sandeephttp://winrichman.blogspot.com/2008/09/limit-row-per-page.html
-
Maximum number of pages allowed in the PivotTable has exceeded the configured limit:
When you try to create element based on PivotTable dynamic section of Page point as Division dim the calculated item is 'All'-> sum * and the customer again the calculated item is ' everything-> sum *. He performed the first calculation (by division), but in the following, it gives the error
«Maximum number of pages allowed in the PivotTable has exceeded (configured limit: 1000).»Try to limit the result set or upgrade [MaxVisiblePages]
See: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
concerning
John
http://obiee101.blogspot.com -
BEEP and Siebel: limit the number of records displayed in a table
Hi all
I use BEEP with Siebel. For example, my XML has a set of 50 activities. These activities are of a different type and different date. Now, I want to show:
5 activities the newer type A in a table.
5 activities the most recent type B in another table.
5 activities the most recent type C in another table.
I tried using the position() method, but since I use the same set of activities 3 times it will not work. The reason is that after you sort the activities in descending order of creation date, I could end up having 5 recent activities of type A digit 4, 9, 17, 23 and 31. That's why I can't use <? If: position() < 6? >.
The 'worst' solution would be to create a link of multiple values in Siebel for each type of activity and prior filtering of activity types in the object link, so I could use the solution above to limit the records per table. But it is really more practical in my opinion.
All welcome ideas on how to do this inside the model.If you couldn't do something similar to this in your model:
<=5]?>
If you wish, send me the sample xml data and a RTF file to [email protected] and I can take a look.
Thank you!
=5]?> -
How to limit the number of lines in a PivotTable?
Hello
I've created a TOP 10 report that looks like this:
the company's sales - sales FY - FY-1
A - 100-35
B - 200-0
I liked recovered the first 10 lines sorted by decreasing the amount of sales, but when I used the function rank on sale column, my values of FY-1 sales are white.
In step 2, so I used a PivotTable to correct this, but now my problem is that I have too put away, and I just want to see the top 10.
In my PivotTable, I can't find the line with the property page.
Is that someone could help me please?After you create the PivotTable, create a result column to sort your sales in descending order. Then, you can create another column with a case then to include only top 10 records excluded on the other. Later, in pivot table mode, make slide this column include/exclude measures, create a formula ' Include'(mind the quotes) and then put it in the section. Check hidden and hide details. It should work.
-
Maximum number of pages allowed in the PivotTable has exceeded
Hello
I'm working on Oracle Business Intelligence 10.1.3.2.1. We have an obligation to show a report in the Pivot layout.
But it generates an error: "exceeded Maximum pages allowed in the PivotTable (configured limit: 1000)"»
So I modified the Instanceconfig.xml with the piece of code:
< PivotView >
< MaxVisibleColumns > 9000 < / MaxVisibleColumns >
< MaxVisiblePages > 90000 < / MaxVisiblePages >
< MaxVisibleRows > 9000000 < / MaxVisibleRows >
< MaxVisibleSections > 9000000 < / MaxVisibleSections >
< ResultRowLimit > 9000000 < / ResultRowLimit >
< / PivotView >
....
...
< CubeMaxRecords > 9000000 < / CubeMaxRecords >
< CubeMaxPopulatedCells > 9000000 < / CubeMaxPopulatedCells >
The number of records is 30 398. In another report, the amount is higher that this number of records and take it without problem.
Can anyone please look into this.Hello
Try to check the link
http://obiee101.blogspot.com/2008/02/OBIEE-controling-pivot-view-behavior.html
Hope this helps
Concerning
Debo -
limit the number of values in the listagg function and create several games
Hi all
I have a requirement where I would like to group one of the fields in a field based on the number of records. Lets say if we have an employee with multiple CODEZONE. Please see the example below. I want concatenation of each 10 EMPNO records into one. If she has more than 10 records for a given EMPNO, it should show in the form of another record.
For example:
EMPNO CODEZONE
A111 AL
A111 AK
A111 AZ
A111 AR
A111 CA
A111 CO
A111 CT
TO A111
A111 DC
A111 FL
A111 GA
A111 HI
B222 AL
B222 AK
B222 AZ
B222 AI
B222 KS
B222 KY
THE B222
B222 ME
B222 MD
MY B222
B222 MI
B222 CA
B222 CO
B222 CT
B222 OF
Result set:
EMPNO CODEZONE
A111 AL | AK | AZ | AR | CA | CO | CT | OF | DC | FL
A111 GA | HI
B222 AL | AK | AZ | AI | KS | KY | THE | ME | MD | MY
B222 MI | CA | CO | CT | OF
The above example can have any number of area CODE for a given EMPNO, the end result should show only a maximum of 10 codes for an EMPNO in each record. If she has more than 10 CODEZONE, it should show as another record. Please provide me with a generic statement to solve this problem. I was not able to control by setting the limit on records for an EMPNO gave to the LISTAGG function. Any ideas are much appreciated.
Thank you1008754 wrote:
Hi allI have a requirement where I would like to group one of the fields in a field based on the number of records. Lets say if we have an employee with multiple CODEZONE. Please see the example below. I want concatenation of each 10 EMPNO records into one. If she has more than 10 records for a given EMPNO, it should show in the form of another record.
For example:
EMPNO CODEZONE
A111 AL
A111 AK
A111 AZ
A111 AR
A111 CA
A111 CO
A111 CT
TO A111
A111 DC
A111 FL
A111 GA
A111 HI
B222 AL
B222 AK
B222 AZ
B222 AI
B222 KS
B222 KY
THE B222
B222 ME
B222 MD
MY B222
B222 MI
B222 CA
B222 CO
B222 CT
B222 OFResult set:
EMPNO CODEZONE
A111 AL | AK | AZ | AR | CA | CO | CT | OF | DC | FL
A111 GA | HI
B222 AL | AK | AZ | AI | KS | KY | THE | ME | MD | MY
B222 MI | CA | CO | CT | OFThe above example can have any number of area CODE for a given EMPNO, the end result should show only a maximum of 10 codes for an EMPNO in each record. If she has more than 10 CODEZONE, it should show as another record. Please provide me with a generic statement to solve this problem. I was not able to control by setting the limit on records for an EMPNO gave to the LISTAGG function. Any ideas are much appreciated.
Thank you
ME_XE?with data (empno, areacode) as 2 ( 3 select 'A111', 'AL' from dual union all 4 select 'A111', 'AK' from dual union all 5 select 'A111', 'AZ' from dual union all 6 select 'A111', 'AR' from dual union all 7 select 'A111', 'CA' from dual union all 8 select 'A111', 'CO' from dual union all 9 select 'A111', 'CT' from dual union all 10 select 'A111', 'DE' from dual union all 11 select 'A111', 'DC' from dual union all 12 select 'A111', 'FL' from dual union all 13 select 'A111', 'GA' from dual union all 14 select 'A111', 'HI' from dual union all 15 select 'B222', 'AL' from dual union all 16 select 'B222', 'AK' from dual union all 17 select 'B222', 'AZ' from dual union all 18 select 'B222', 'IA' from dual union all 19 select 'B222', 'KS' from dual union all 20 select 'B222', 'KY' from dual union all 21 select 'B222', 'LA' from dual union all 22 select 'B222', 'ME' from dual union all 23 select 'B222', 'MD' from dual union all 24 select 'B222', 'MA' from dual union all 25 select 'B222', 'MI' from dual union all 26 select 'B222', 'CA' from dual union all 27 select 'B222', 'CO' from dual union all 28 select 'B222', 'CT' from dual union all 29 select 'B222', 'DE' from dual 30 ) 31 select 32 empno, listagg(areacode, ',') within group (order by emp_grp) as emp_list 33 from 34 ( 35 select 36 ceil(row_number() over (partition by empno order by areacode) / 10) as emp_grp, 37 empno, 38 areacode 39 from data 40 ) 41 group by empno, emp_grp; EMPNO EMP_LIST ------------------------------ ------------------------------ A111 AK,AL,AR,AZ,CA,CO,CT,DC,DE,FL A111 GA,HI B222 AK,AL,AZ,CA,CO,CT,DE,IA,KS,KY B222 LA,MA,MD,ME,MI 4 rows selected. Elapsed: 00:00:00.05 ME_XE?
In the future, it would be nice if you could provide baseline data.
See you soon,.
-
Group by affected by the limit of number of line
I see some strange behaviors with the Group of features on APEX 4.0
Version APEX 4.0.0.00.46 and 4.0.1.00.03 on the 11.1.0.7.0 database
If I ask a Group By for an interactive report using the interactive stock reports > menu Format, group is applied after the APXWS_MAX_ROW_CNT filter has been applied, so that the Group of works only on a subset of the data. Worse still, no warning is displayed to the user once the Group has been applied, so there, that it's unclear whether the data in the report are not complete.
For example: if I create an interactive report on SELECT * from object.
And then using the help of the menu of interactive report, I do a group the OWNER column, obtaining the number of columns for each owner, I get back a result set with inaccurate information.
From a record of the session, the query that the IR is running is:
Select 'OWNER', COUNTY ("parameter") "APXWS_GBFC_01", count (*) (as apxws_row_cnt)
de)
Select *.
de)
Select *.
(of object) r) r
where rownum < = group of to_number(:APXWS_MAX_ROW_CNT) by the 'OWNER '.
Then as a suspect, the limit of number of lines is applied before the group. It's not logical to me, surely the limit of the lines must be applied only on the number of rows returned to the user?
Does anyone know of a workaround, for now what I can do is create a new report for each possible group by combination required. Anyone on the apex team: is this behavior of design, or is this a bug?
Thank you
James
Published by: James C on November 4, 2010 10:20James,
It is a bug. We apply the limit max line in the inner query to prevent long-running queries. Given that the result is not what the user expects, interactive report should display a warning as follows over the group by:
Group By applied only to the first 10,000 lines. The report query returns more than 10,000 lines, please filter your data to ensure complete results.I filed a bug for the same problem get fixed in the next version. If you null out the maximum number of lines, view report and Group By not applying the maximum lines filter at run time. I don't know if it would be a good work around because it will impact on performance if the query returns of large data sets.
Kind regards
Christina -
Display a subset of records is to limit the information that I can show
Hi all
I develop page TOC of my Gallery of photos and when I started, I had a lot of data, I wanted to show and through the use of lookup tables and appropriate in my SELECT query logic, I could show a vertical list of galleries which corresponded to a specific category. Each has been rated two samples thumbnail, title, description, model, photographer and makeup artist names. I was even able to set the page title and the header to display the appropriate information.
A query SELECT additoinal counted the number of galleries in the main table that relate to the current query string value.
Another query SELECTION counted the number of photos each different gallery photoset and displays this information in the title of EACH Gallery.
The description is in the opposite direction to the flow of the code, keep in mind. Here is the code (the $spec variable is the query string.):
get the total number of photos in a gallery photoset
$conn = dbConnect ('query');
$getTotal = "SELECT COUNT (*).
Pictures, galleries
WHERE galleries.g_spec = '%$spec '.
AND galleries.g_id = photos.g_id ';
$total = $conn-> query ($getTotal);
$row = $total-> fetch_row();
$totalPix = $row [0];get the number of galleries
$conn = dbConnect ('query');
$getGtotal = "SELECT COUNT (*).
Galleries
WHERE galleries.g_spec = '$spec % "";
$g_total = $conn-> query ($getGtotal);
$row = $g_total-> fetch_row();
$galTotal = $row [0];get thumbnails from the gallery name, description, subject, category, model, photographer, mua
$conn = dbConnect ('query');
$sql = "SELECT g_thumb1, g_thumb2, g_name, g_desc, subject_id, stuff, model_name, photographer_name, mua_name.
Galleries, gallery_spec, model_names, photographer_names, mua_names
WHERE galleries.g_spec = '%$spec '.
AND gallery_spec.g_spec = galleries.g_spec
AND model_names.model_id = galleries.g_model
AND photographer_names.photographer_id = galleries.g_photographer
AND mua_names.mua_id = galleries.g_mua
ORDER BY DESC g_id ';
$result = $conn-> Query or die (mysqli_error ());
$galSpec = $result-> fetch_assoc();end of the code.
In any case, it worked perfectly. However, I've added galleries, this list will get quite long. So, I wanted to add navigation that would break the number of galleries in set amounts.
When I introduced parameters to LIMIT the number of queries poster based on a variable called SHOWMAX, my display got all botched. Certainly, I adapt the code of the book of David Powers PHP Solutions and learn that I will. I gave up on all of the above data display and went the simple route, thinking that I would like to add more features that I learned. This operation necessitated the restructuring a bit of my database.
Here's the code I added which allows a navigation based on the limit of 3 entries per page:
set the maximum number of records per page
define ('SHOWMAX', 3);get the number of galleries
$conn = dbConnect ('query');
$getGtotal = "SELECT COUNT (*).
Galleries «;»
$g_total = $conn-> query ($getGtotal);
$row = $g_total-> fetch_row();
$galTotal = $row [0];set the current page
$curPage = isset($_GET['curPage'])? $_GET ["curPage']: 0;retrieve the subset of galleries
$conn = dbConnect ('query');calculate the starting line of the subset
$startRow = $curPage * SHOWMAX;$sql = "SELECT."
Galleries
ORDER BY DESC g_id
LIMIT $startRow,". SHOWMAX;
$result = $conn-> Query or die (mysqli_error ());
$galSpec = $result-> fetch_assoc();end of the code.
With a code of navigation in the body:
< div id = 'header4' >
< P > displaying <? PHP echo $startRow + 1;
If ($startRow + 1, $galTotal) {}
ECHO "at";
If ($startRow + SHOWMAX < $galTotal) {}
echo $startRow + SHOWMAX;
}
else {}
echo $galTotal;
}
}
Echo "of $galTotal."
If ($curPage > 0) {}
echo "< a href ="'. $_SERVER ['PHP_SELF'].'? curPage ='. ($curPage - 1). "" "" > < /A > back. "
}
If ($startRow + SHOWMAX < $galTotal) {}
echo "< a href ="'. $_SERVER ['PHP_SELF'].'? curPage ='. ($curPage + 1). "" ' > Next < /a > ';
}
? >Now I can view my information Gallery in a group of 3 per page.
THE PROBEM, it IS that when I add additional queries, for example to get the subject and the category of information, the model, the photograpger and makeup information or artist, he doesn't always show up, sometimes it messes up the display, and in all cases, these additional information disappears when I navigate a subset of a subset. That's why I asked the performance values from one page to another.
I absolutely obstructionisme and I have to put galleries in service without navigation until I can understand it. I'm willing to even hire someone for advice. I can't make this work. Yes, I know it is complicated for someone of my skill level, but I have no choice, I have to do this work.
Alternative forms of navigation/view subsets of records would be greatly appreciated. ANY help, suggestions or advice will be greatly appreciated.
Please read through it all.
Sincerely,.
wordman
Again you are misunderstanding. I'm not suggesting to hardcode values. I just wonder if you are / were trying to pass the object real and descriptions of category or the category id and the subject so that you can refresh the database on every page.
> I do not think that the page re - questions on navigating, I think that it loads just the table info.
I don't think so. Just look at the SQL code. It uses the values of offset and limit which means for me that it returns only the lines of the current page. What picture are you talking about?
> So, I added a separate request to take this info from the database, and it bombards the page.
I really think you tackle this all wrong. Right now you are looking for solutions to specific problems without having a solid foundation in the technologies involved. Trying to build that you learn is a recipe for disaster and frustration. Stop what you are doing for awhile. Work on some php and tutorials SQL which are not related to this project. Work through them, until you understand what makes each line of code.
Currently, you are directed down a rat hole. You can get the most work, but you will be be plagued by bugs and scripts that are difficult to maintain.
-
Need to limit the number of columns
When a tab in the last cell of the row, I want the cursor to the next line down. Instead, it creates a new useless column. Can't seem to find a setting that allows me to limit the number of columns in a page - someone ' one knows how to do this?
Thanks for your wisdom shared, Oh wise Ones.
I'm not aware of do what you want. You can post your comments directly to Apple using the menu item "numbers > provide Feedback numbers.
You can still use the key combinations:
< command > + < right arrow > to access at the end of a line
< command > + < left arrow > to move to the beginning of a line
< command > + < down > to pass at the end of a column
< command > + < arrow > to move to the beginning of a column
-
Can Notes show the number of records with each folder?
Can Notes show the number of records with each folder?
No it can't. It would be nice tho.
-
How can I limit the number of attempts to print a web page
I am trying to find a solution to a problem on our network.
We run several kiosk machines that allow customers to print documents and web pages. However, we find that we are wasting a lot of ink because of the user frequently sending the same print job on the printer.
Yesterday we had someone print more than 70 pages, because they just keep clicking on print.
I tried looking for an add-on that would solve this but was not able to find one.
My question is this, is there an internal setting that can be changed in firefox to limit the number of prints is trying to say once every 30 seconds, or even a way to make a dialog box turns on screen saying that the print request is currently dealing and does nor print before completing the task at hand.Sorry, there no setting in Firefox to avoid that from happening. Once the user sees the "native print dialog" box (which is seen when you Ctrl + P for print), the operating system and the printer drivers are here.
I saw something similar to that on kiosk / PC rental stores Office of FedEx, which inform the user of the cost per page, the user wants to send to a printer, and when the user click again to the same pages again, he asked if you want to spend another $x.xx to print a second copy. Would not too different to simply cut the printing of multiple copies of the same document and warn the user of this action.
My advice is to discuss it with anyone who put in place these kiosks to be with.
-
How can I limit the number of Web sites on the new tab page?
Is there a setting where I can limit the number of thumbnails / Web sites that appear on the new tab page? When I opened a new tab - I don't want to see tons of sites I have visited - but also, I don't want to delete them all. For example - there is a setting where the new tab page displays the last ten sites I've visited - with all my pinned sites?
There are two settings 'hidden' for this 'grid '.
Browser.newtabpage.Columns
and
Browser.newtabpage.RowsType of topic: config in the URL bar and press ENTER.
So put . browser.newtabpage in the top search bar.Each of these preferences in the lower panel right-click and select Edit. Then change the value default of 3 for each of these preferences to what you prefer, for "pinned" both sites all browsing history you want to appear in the 'grid '.
-
Limit the number of messages on iOS?
How can I limit the number of messages stored on my iPhone IOS 9?
I want to limit it to a fixed number or a time - week or month.
I use my iPhone to check incoming messages and always use my computer to reply to messages.
TIA
Hans
This option is gone after iOS 7
You can limit the synchronization time in settings - Mail, Contacts - which could limit the number of emails
Maybe you are looking for
-
Damage to the screen from Macbook Pro retina
Then I found a thread similar to this one. But no one seemed to have a definitive answer. I have a Macbook Pro 13 "retina 2014 and there is some damage on the screen. Seems to be the transparent layer that is consumed. I have used a cleaner Whiteboar
-
I try to get a DVD/CD to work my BIOS is outdated (2.30) so I download the last excerpt from BIOS (2.50) maybe the file, delete all devices PCMCIA cards etc, stop all programs and start than the windows upgrade. He arrived in the 'screen now update t
-
Ive tried everything to unfreeze it, but it won't unfreeze. It is stuck on the peak of Apple's music and I can't go to my music at all. I tried signing in and out and even turn off my phone, but it does not work.
-
Cannot download the drivers because of the redirection
Hey guys,. After I reinstalled my OS I went to support.lenovo.com-> download drivers and after I entered my model number (j100 8256g4g) he showed me the page with drivers, then it redirected me to mobilesupport.lenovo.com.Help me please!
-
How to make a live chat via windows messenger live
How to video chat live with windows live messenger