Limitation of duration on Multply computers

Similar Questions

• HP applications in the windows store limited to users of HP computers only

  The following response to my question on the microsoft 8.1 forum is provided below:

  "HP provide some Apps through the store, which, in itself, is accessible to all users of Windows 8. However they are limited to only those that run a computer HP so must by definition cross some authentication process to confirm that the attached computer has eligibility.

  "Never this process what once you have applied the Pack Pro, the operating system is no longer identified as being provided by HP so can not install HP specific applications.

  My question is this:

  "Once I applied the Pro Pack to my laptop HP Envy Touchsmart 15 quad, what applications/upgrades I no longer able to download because the operating system will be is no longer recognized as being supplied by HP?

  What is the workaround for this.

  Hello THERE-5707

  HP Pro Pack is a business software and to get your question more than exhibition, I would post in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Mini Mac 10.5.8 has been improved to 10.7, we have a lot of products older Apple if I buy the most recent delivered to nine Mini can I still use my iBook etc.

  My Mini Mac 10.5.8 has been upgraded to 10.7. We have a lot of Apple products. If I always buy a refurbished Mac Mini can I have limited access to my other computers laptops, iPhone, etc. I'll gather all the detailed information of the products Apple and posting here.

  Everything should be good. Just use the same identifier Apple you used on older devices.

  Note the following points:

  Upgrading to 10.7 and don't forget Rosetta!

  You can synchronize only with a computer. To move computers

  Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

  If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

  iOS: backup and restore your device iOS with iCloud or iTunes

• Is there an SSD in the time Capsule ME177Z/A?

  I think to buy a time capsule (and not a Synology NAS). However, the NAS has two advantages:
  -SSD-online speed drive

  -2 road to loan-online security

  If readers speed is the same, I'll go for the TC should be easier...

  Thank you

  Michael

  The TC uses a standard Seagate drive spinning...

  Almost all NAS will use spins discs... SSD are much too expensive and data limited the duration of the writing... Unlike the magnetic disks that can write continuously for years...

  However quickly NAS using SSD as cache to speed up the transfer of... any decent hard drive can now reach 150 Mbps which exceeds gigabit. It is without SSD... It is not necessary.

  TC is slow, much slower than a decent NAS.

  I recently posted speeds. The TC is CPU bound.

  Re: Slow process of copying from Mac to Time Capsule

• No sound icon by volume in the taskbar. Can not see the box in the Panel... areas are greyed out. has tried windows Fixit... does not solve the problem

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  "Thank God" Friday, December 31, 2010 11:40

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  Go to this page and download the drivers for your motherboard:

  http://www.ASUS.com/product.aspx?P_ID=szSFtrap7crpBaQE

  --

  Roy Smith
  Windows 7 Professional
  Postbox 2.1.0
  Tuesday, January 4, 2011 22:09:51

• At startup, updates to Vista is stuck on "Full download 100% - do not turn off your computer". Cannot stop at least stop with button / stop.

  At startup, Vista update will start and get blocked msg on "Full download 100% - do not turn off your computer".  Last night on the left that it runs and it took 12.5 hours before finally coming out of the error status and asking for the password.  Could not stop downloading progress with Task Manager/ctrl-alt-del, etc., unless you use the power button / stop.   This severely limits the duration of use and if/when we are able to use it in an hour or two, it black screens and reboots restart fiasco together again.

  Hello Steve Gardener.

  Thanks for your post.  Try to start your computer in Safe Mode.  This allows the update to install without problem?  If so, start your computer in normal mode and a test for features.  Please let us know the results.

  See you soon

• Parental control time limit set at 24 hours by mistake... cannot go beyond login.

  Original title: restriction set at 24 hours a time... error cannot go beyond login.

  We have windows Vista Home Basic.  There are 2 user ID in place, it is not used and nobody remember the password.  Another we know the password. However, my son put the limitation on duration of parental control to 24 hours by chance and we can no longer access the computer.  Whenever we tried to enter, we get the message of time restrictions.  Please let me know how we can get around that we can not get the menu system/controls.

  What you wrote is not logical.

  As said by Umesh P, moderator, you need an administrator account to set the time limit.
  And parental controls can be set on an administrator account.
  This means that you must have an admin account, you can log on. If you are the admin or in possession of an admin password.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have two creative cloud products and it won't let me install it in another computer

  I am a student and the student service. I decided to hire the person for my friend and did through my account. Now, the system doesn't let me install it in another computer. He repeats, I'm limited to use in both computers, but I paid for two accounts.

  Hello

  You bought two subscription creative cloud under one account (your own).

  If go you ahead and try to activate it on 3rd computer he'll give activation error, because under an Adobe account, you can only keep a single creative cloud subscription, which can be used on both computers.

  in order to add on another computer, you need to buy the subscription under a different email address.

  Creating cloud FAQ

  In order to cancel the subscription 2nd creative cloud.

  Please contact Adobe customer care http://helpx.adobe.com/contact.html

  • Remember that you are logged on the page with your Adobe ID.
  • Select your product and what you need help with
  • Click on the blue box "still need help? Contact us. "

• license restrictions

  I'm curious to know if some CC adobe plans have various limits on the number of computers that can under license. Some business plans allow more than two computers that will be on the license?

  Hi,

  License Adobe CC can be activated on 2 machines using the same Adobe ID, but can be used alone at the same time.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• If I have already downloaded creative cloud on my laptop, can I install it on my desktop also?

  If I have already downloaded creative cloud on my laptop, can I install it on my desktop also?

  I have already bought the creative cloud and don't want to pay again, but want it on two computers... is it possible?

  Yes, your single-user license allows installation on an unlimited computers, but sign-in/activation number is limited to, at most, two computers at a time.

  just install the application of cc on your 2nd computer desktop and use it to install your apps, apps download Adobe Creative Cloud cc | CC free trial Adobe

• How to reinstall creative cloud to a new disk?

  Hello

  Then jeutiliser Creative cloud apps from the start (Windows 7-64 bit)

  "My system disk just crashed and I will probably need to reinstall Windows from scratch;-"

  Is there a limitation on the number of computers on which I could use a CC license, and if the answer is 'Yes', how can I reset the number of facilities that I use?

  Thanks for your help

  You can activate subscription creative cloud on 2 computers.

  If you could not disable previous computer due to the failure of the system / disk crash.

  You will not face any question during activation on 2' nd computer.

  However, when you try to activate on a 3' computer rd, you will get a pop-up notification that "Maximum of Activation limit exceeded", product has been activated on computer 2 already.

  Note:

  In the same window pop up, look for the option "disconnect all computers.

  Select the option and to proceed with the activation process.

  This does not alter the CC of the computer apps, it will be a few signs on the activation of the previous computers.

  It by resetting the Activation count to 0, so that you can activate the apsp CC again on any 2 computers of your choice.

• Need help joining 2 prels in a movie

  Hi I want to raise two PE9 prels film, how can I do this?

  Kind regards... Andy

  When I create intermediate files, which will be published later, I use a CODEC lossless, as Lagarith or UT Lossless. This article goes into details: http://forums.adobe.com/thread/875797?tstart=0

  For extended accounts of YouTube, we'll have to share a YouTube compatible file (see this FAQ entry: http://forums.adobe.com/thread/623549?tstart=0 ) and then manually download them via your extended account. Even when pre 10 has been encoded, there is no extended YouTube accounts, sort of pre is wired into the former limitation of duration.

  I guess that PrE 11 will have the capacity of extended account, but then YouTube will propose a Super account long, and we'll have at hand and manually download, brand-new.

  Good luck

  Hunt

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Comcast DTA severely limits media center TV volume on two of my computers

  I completed the installation of the Comcast DTA on two computers and successfully installed the IR blaster to be able to use the Media Center remote and the cable guide.  However, the audio of TV is severely limited.  The comcast tech came out and said I should use the DTA as a tuner and its remote control.  Yes the volume comes back, but then I can't use all the Media Center including DVR functionality.

  Why the DTA is screwing the audio of the TV through Media Center?

  have you used these instructions or something else?
  http://digitalmediaphile.com/index.php/tips-tricks-how-tos/Comcast-DTA-MCE-setup-steps/
   
   
   
  On Mon, 13 Sep 2010 19:21:59 + 0000, bogiedoc wrote:
   
  >
  >
  > I have completed the installation of the Comcast DTA on two computers and successfully installed the IR blaster to be able to use the Media Center remote and the cable guide.  However, the audio of TV is severely limited.  The comcast tech came out and said I should use the DTA as a tuner and its remote control.  Yes the volume comes back, but then I can't use all the Media Center including DVR functionality.
  >
  > Why the DTA is screwing the audio of TV through Media Center?
   

  Barb Bowman

  http://www.digitalmediaphile.com

• I bought a new macbook and need to install it on my new laptop. I'm a student so my office adobe applications are limited to 2 computers. I installed my second adobe desktop application in a laptop backup. How to uninstall or remove creative cloud of a ma

  I'm a student who bought a new macbook and need to install the cloud creative adobe on my new laptop computer. A student account limits your adobe desktop applications to 2 computers. I installed my first desktop adobe app in my old computer, and the other in a laptop backup. How to uninstall or remove creative cloud from a laptop in order for me to install it in the new laptop?

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html