Link field in the property 'sticks bar '?

Similar Questions

• Loop link detected for the property "previewImage" how to solve?

  Hello

  I'm periodiacally to receive the following error message:

  Asset:///controls/DisplayResultsNavPages.QML:118:25: SearchResultsListItem QML: link detected loop for the property "previewImage".

  Here's a sample of my code, the error occurs in ListItemComponent, I need to call a function that will scrape a page in real time and then update the datmodel if the previewImage is empty.   I don't know if there is a better place to call the scrapePictureIfNeeded() thereby avoiding loop link detected the error, if there is or if you have some tips on how to avoid this error, it would be greatly appreciated...

  Thank you, in advance...

  Container {
              ListView {
                  function scrapePictureIfNeeded( ExternalUrl, source, Index )
                  {
                      if ( sIndexesSoFar.indexOf(Index+"|") == -1 )
                       {
                           sIndexesSoFar += Index + "|";
                           netscrape2.setadImages("");
                           netscrape2.setadId(Index);
                           netscrape2.scrapeSite(ExternalUrl);
                      }
                      return "";
                  }
                  id: searchListView
                  dataModel: searchDataModel
                  listItemComponents: [
                      ListItemComponent {
                          id: listComponentSearchResultsListItem
                          type: ""
                          SearchResultsListItem {
                              pubDate: ListItemData.TimeStamp + " - " + ListItemData.Location
                              previewImage: ( ListItemData.PreviewImage == "" ) ? ListItem.view.scrapePictureIfNeeded( ListItemData.ExternalUrl, ListItemData.Source, ListItem.indexPath ):ListItemData.PreviewImage
                              sourceImage: ListItemData.Source
                          }
                      }
                  ]
                  onTriggered: {
                      // launch second page
                  }
                  attachedObjects: [
                          ScrapeHttp {
                          id: netscrape2
                          onComplete: {
                              var aPictures = netscrape2.adImages.split("|");
                              var data = searchDataModel.data([netscrape2.adId]);
                              if ( aPictures.length > 0 )
                              {
                                  data.PreviewImage = aPictures[0];
                                  searchDataModel.replace([netscrape2.adId], data);
                              }
                          }
                      }
  
                  ]
               } // end of ListView
          }   // End of Container
  

  Hello

  I solved it, after some research, I have dicsocvering that QML actually binds the function to the property, so I moved the fuction call to: and now, everythign works...

  itemType function (data, row) {}

  scrapePictureIfNeeded (data. ExternalUrl, data. Source, row)

  Return ' ';

  }

• Select the value of the field in the database column stores xml as a varchar

  Hi all

  Oracle version is 11 GR 2.

  I have a column of a database in which we store the XML string varchar2.

  "I need to extract only newvalue when field nameof the property ="modifiedBy'. '.

  In this case my answer would be - maker16

  My XML is as below.

  with t as
  (
  select '<?xml version="1.0" encoding="UTF-8"?>
  <changeinfo><property name="checkedOn" newvalue="03/21/2013 15:51:11" oldvalue="03/21/2013"/><property name="modifiedOn" newvalue="07/22/2013 14:04:55" oldvalue="03/21/2013"/><property name="phoneNo" newvalue="9942251"/><property name="modifiedBy" newvalue="maker16" oldvalue="clarissamaker"/></changeinfo>' as datacolumn
  FROM dual
  )
  select extractvalue(datacolumn,'/changeinfo/property name[@property name="modifiedBy"]/newvalue') from t;
  
  

  How to write a select statement to get the above result?

  Thank you

  SID

  You can do it like

  1. get the name and NewValue as columns and then create a filter with the WHERE clause.

  2. or you can filter when you set the path itself.

  --I have not applied the WHERE clause to filter the NAME. You can do that.
  
  SQL> with t as
    2  (
    3  select '
    4  
    5  
    6  
    7  
    8  
    9  ' as datacolumn
   10  FROM dual
   11  )
   12  select t1.name, t1.newval
   13    from t
   14       , xmltable
   15         (
   16            '/changeinfo/property' passing xmltype(datacolumn)
   17            columns
   18              name varchar2(100) path '@name',
   19              newval varchar2(100) path '@newvalue'
   20         ) t1;
  
  NAME                           NEWVAL
  ------------------------------ ------------------------------
  checkedOn                      03/21/2013 15:51:11
  modifiedOn                     07/22/2013 14:04:55
  phoneNo                        9942251
  modifiedBy                     maker16
  
  --This filters the Name attribute in the path definition itself.
  
  SQL> with t as
    2  (
    3  select '
    4  
    5  
    6  
    7  
    8  
    9  ' as datacolumn
   10  FROM dual
   11  )
   12  select t1.newval
   13    from t
   14       , xmltable
   15         (
   16            '/changeinfo/property[@name="modifiedBy"]' passing xmltype(datacolumn)
   17            columns
   18              newval varchar2(100) path '@newvalue'
   19         ) t1;
  
  NEWVAL
  ------------------------------
  maker16
  

  And the $ 1 million question would be why VARCHAR2 type of XML data.

• Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.

• How to make URL link appears in the status bar as all other browsers?

  A crucial part of security awareness works the same in 4.0b7.
  When you move to a link, Chrome, Opera and Firefox-3 in that all show the URL listed low to the left of the screen. But we cannot keep us ourselves against in the same way with 4.0b7 phishing attacks because it puts the URL of the link to the top in the address instead, bar where it is truncated.

  This 'feature' seems to be undocumented; It is not mentioned in the Notes.

  What config setting I need to change to get the URL of the link to show up toward the bottom in the status bar again? (Or should I say the module Bar, given that the 'status bar' is no longer appears under the Menu-> view-> toolbars.)

  Versions nightly of minefield a few months experienced with a display URL 'floating' for hovered links they were preparing to remove the Statusbar (similar to how Chrome displays), but after a few weeks that the display was moved to the address bar. IMO, this is absurd investment - it belongs in the lower corner on the left where is always has been displayed in Firefox and other browsers, where users expect it to be and where there is generally more space to display the URL of the link, the cursor is above. I suspect that the change will be permanent, and users must turn to the extension development community to solve this problem.

  The Status4Evar extension restores 3 functions of the status bar at the helm of the add-on.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/235283/

• Change the color of 1 link of the Bootstrap navigation bar

  Hello

  I am eager to pass the roll of color of a link in the navigation bar of bootraps.

  I tried a class on this subject... no luck... I can change all the nav bar color... but I just want a roll of color of the item...

  All thoughts

  PAL

  Place the following in your custom stylesheet (do not touch the stylesheet (s)) original of Bootstrap

  .NavBar - default .navbar-nav > li > a: hover, .navbar - default .navbar-nav > li > a: focus {}

  background-color: #FFFF00;

  color: #FFC0CB;

  }

  This assumes that you have deployed the default navigation bar. If you use a different class, also adjust the colors to suit.

• What is the property to change the link colors?

  DW5.5 in win 7

  I have a css file that is attached to my documents "twoColLiqLtHdr.css."

  What would be the property (at least that's what I think you would call it) to change the color of normal link from blue to white.

  I have another page that has some online code that sets the color of the link to yellow for this page only (a: link {color: #ff0})-provided by Nancy this Ant.

  I want to leave this yellow page with links, but change the color of a link to any other pages.

  all pages are derived from a model.

  but I guess I make the change in the css file!

  I can't find reference to a: link {color: #ff0} in the file "twoColLiqLtHdr.css" so I guess that's the default

  I tried to add in the body, containing sections and content, but that had no effect, UN-less that I did something wrong, I saved the file css after I made the changes

  If I move my mouse over a link in a page of the browser thingy (ships wheel) appears and tells

  twoColLiqLtHdr.css

  body

  . Container

  . I'm glad

  any help would be appreciated

  Thank you

  Try the following (replace yourColor with the color of the desired link and hover color). Add this at the end of the twoColLiqLtHdr.css file

  . Container a {}

  color: #yourColor;

  }

  . Container a: hover {}

  color: #yourColor;

  }

• & quot; / & quot; in front of link in the property inspector

  Hi-I'm having a problem and cannot figure out how to solve.
  Whenever I use the function 'point to the file"in the property inspector to create a link in the Source box or the link, DW (MX2004) automatically place one box" / "-forward slash-front link, forcing me to remove them manually to unlock the link. Is this a setting hidden somewhere I have not looked at?
  Thank you

  I'll answer my own question - the answer here is for anyone interested:
  Instead of root choose relative doc in the drop-down list box.

• Where the property add a link

  I'm a GoLive user, who tried to go to DW several times over the years. Whenever I went back to what I know and am comfortable with and is also fast. This time, I have determined is not to give up. I started with the Total Training DVD, then bought two books.
  
  I'm reading the Quick Start Guide Visual Dreamweaver CS3 very carefully, trying to absorb each chapter so that there is no escape in my learning of this program. I was stuck on a small simple funtion for three days, the property link in the properties panel.
  
  In the book, he shows a picture of a link. There is no link in my control panel. Can someone save me until I end up in the funny farm? :-)
  
  Linda

  I just found what I was looking for.

  For others who have the same question, here is the answer:

  You must click on the button "show only set properties" before the "add property link" will appear.

• How to add scroll bar to the field in the column of the report

  Hello again,
  
  I need to add a scroll bar to the field in the column of the report in my application "form.
  
  There is a table with columns of text and sometimes a lot of information must be filled in these areas, and thus the overview of the report becomes unreadable, because all rows have different heights according to the amount of text has been filled.
  
  What I want is to make all lines with the same height, and if there is more text in a field that can allow a height - a scroll bar appears so for this specific domain.
  Is it possible to do?
  
  Thank you in advance.

  Hello

  OK - it is important that tell you what type of report that you use like this makes a difference to what is possible!

  For interactive reports, you cannot use a CSS stylesheet in the same way with respect to normal relations. The easiest way is probably to include a complete div in your SQL statement directly. Something like:

  select      ID as "ID",
        '
  ' || "MY_BIG_FIELD" || '
  ' as "DETAILS"
   from      TABLEX
  

  This will put the data in this column in the individual DIV tags, and then apply the style from the example of the Dene.

  Andy

• Error: The property 'Mot_de_passe_du_compte = true' is defined in multiple fields

  Hello

  Today, I got the following error when providing an AD user account. Please, can someone help to solve?

  IAM-2050243: process Orchestration with id 14034, failed with the IAM-4060004 error message: an error has occurred in oracle.iam.provisioning.handlers.ProvisionAppInstanceActionHandler provision of application instance with the 1 key for the user with the 21 key and the cause of the error is an error has occurred in oracle.iam.provisioning.spi.DOBProvisioningMechanism/provision while the application instance commissioning with key 0 for user whose name NCHIP the cause of error is oracle.iam.provisioning.exception.GenericProvisioningException : DOBJ. GEN_ERROR: H: the property 'Mot_de_passe_du_compte = true' is set in several areas. : The property 'Mot_de_passe_du_compte = true' is set in several areas...

  Thank you

  Milan

  It is in fact of SDP table

  SELECT THE SDP. SDP_PROPERTY_NAME,

  SDP. SDP_PROPERTY_VALUE,

  SDP. SDP_KEY

  SDP

  JOIN INTERNAL SDC

  THE TCS. SDC_KEY = SDP. SDC_KEY

  JOIN INTERNAL SDK

  THE SOFTWARE DEVELOPMENT KIT. SDK_KEY = SDC. SDK_KEY

  WHERE SDK. SDK_NAME = "UD_ADUSER".

  AND SDP. SDP_PROPERTY_NAME = "Mot_de_passe_du_compte";

  He'll show the properties for all the versions of a form. You can select only later. It is a bug, no doubt, but don't know if it has been already submitted to Oracle or not.

• link form to the page master page field

  I have a word document that is converted to an Acrobat form. I started editing in Live Cycle and want a field in the form page to bind to a field in the master page. I created the field to work on the page of the form. However, as soon as I cut and paste the field (calculated) in the master, I get "Script failed (language is form Calc..)" and "accessor TextField1.rawValue is unknown" errors. Is there a reason and the fix for this problem?

  Thanks for your help Srini. I found that the two fields of naming the same and using the global option of the working field

• No field map Image in the property inspector - DW CS4

  I use Dreamweaver CS4 on Windows XP. I want to create an image map... to bind several different areas of the same image at different URLS.

  I've never had a problem to do in CS3... but now, even if DW CS4 help files, it says you type a unique name in the name field of the map... and choose a shape selector... etc, etc... HE DIDN'T THERE HAS NO FIELDS THAT RELATE TO IMAGE MAPS IN THE PROPERTIES INSPECTOR. In the HTML parameter or the adjustment of the CSS. I made sure that the Inspector is fully developed. And I really feel like I'm in the grey area.

  Am I missing something? Y at - it a setting I have not clicked? Can someone help me? Thank you very much. WCW

  To all those who in the future could look for that - I think that the problem is - you must select the image first, THEN when you open properties - the ability to create an image map is available.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Customization-document formulas for different "the name of the property" on the Action tab

  Hello
  
  I'm trying to find the document that contains the meaning of different "the name of the property" in the Action tab, while in the form customization screen. I was searching for a document but no luck.
  
  Please let me know the link to this document.
  
  Thank you
  Atul

  INITIAL_VALUE is the default value for the field when the form is displayed.

  Hope this helps,
  Sandeep Gandhi