List of virtual machines on an ESX host

Similar Questions

• Get the list of virtual machines on an ESX host specific and dumping of .csv in a specific format

  I have problems to find a way to get a list of virtual machines on an ESX host specific and then he dumped to a .csv in the following format

  I use the get-vmhost esxhostname | Get - vm

  but everyhting else after, it is where I am lost...  I think the closest I had been posting the output with a goofy header and format 'vm1, vm2, vm3 "...

  name

  computer 1 name

  computer 2 name

  name of the machine 3

  to use for later use.  Any help would be appreciated.

  You must use the Select-Object cmdlet to specify more precisely the properties you want.

  The Export-Csv doesn't know how to manage the virtual computer object.

  Something like that

  Get-vmhost esxhostname | Get - vm | Select name. Export Csv.\report.csv - NoTypeInformation - UseCulture

• Get the list of virtual machines on an ESX host specific AND of a specific folder...

  I'm trying to get a list of the virtual machines running on an ESX host specific, but also are located in a specific folder.

  I think it must be something like that below, but for now without success:

  Get-vmhost $esx_hostname | Get-vm-location (get-record $folder_name( )
  giving the error message: Get - VM: the input object cannot be bound to all the settings for the command EIThim because
  the command does not pipeline or entry and its own input stakeholders do not match any parameters that accept entries of pipeline of.
  Any thoughts?
  Thank you!
  Eric

  VMHost and folder use the Get-VM-setting position. You must select either using the Where-Object cmdlet filter. For example:

  Get-VMHost $esx_hostname |
  Get-VM |
  Where-Object {$_.Folder.Name -eq $folder_name}
  

• ESX as a virtual machine on an ESX host

  Currently, I am installing ESX as a virtual machine on an ESX host. I have a couple of hosts potentially put this VM: two 4.0 in the course of execution, one running 4.1. I would like to run this VM on the host running 4.1, and the virtual machine must run 4.0. Thanks to my documentation and research of compatibility, I found that it is not supported as an operating system to run in a virtual machine under ESX ESX, but it's for the workstation and fusion. I read on some blogs that ESX install as a virtual machine on an ESX host is possible (at least on older versions), but comes with a few problems, which have no workaround. I found (external) positions regarding do all this with the 4.0, but my preference would be to do with 4.1 on the host and 4.0 on the virtual computer. I can't find something to do with 4.1, which is not surprising given that the upgrade became available less than two weeks ago. Does anyone tried it yet? Is there anything, you have found or recommend as I approach to do this? (I read that the virtual computer must be configured as a computer virtual running RHEL 5 with 2 GB of RAM http://when all this is done with version 4.0, but I was not able to find much more.) Thanks in advance for any help and suggestions!

  Hello

  Yes, I tried last week and it worked for me. You are on the right track, we must select RHEL 5 64-bit as OS and assign the 2 GB of ram, and in addition to sound, you will need to use E1000 NICs for the installation to complete.

  FYI, this configuration is not taken in charge/tested/certified by VMware.

  Hope this information helps

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• All virtual machines on my ESX host off power at the same time

  Hi all

  Recently I attend the interview. a guy asked me this question

  < police = "Times New Roman, serif" >all virtual machines on my power off ESX at the same time host < / police >< / police >?

  What was the cause of the highest of the error, how to troubleshoot the error.please me.anybody guide to address this problem?

  Thanks

  Surya

  If all the virtual machines if lower at the same time, my bet would be VMware HA. Just for fun, build it inside your head:

  (1) 8 ESX nodes, all service consoles connected to a unique management switch.

  (2) now to create a cluster of these nodes, put all your virtual machines in there and activate HA, choose ' host isolation response: power off.

  (3) draw power from your management switch. HA on each host will deduct that the host is isolated-> turn off all the virtual machines.

  Each host will think the same thing, and hop find you with all virtual machines down to the time in the whole of the cluster. Have seen this one several times when people go and upgrade their management switches in the evening ("hey, it's only management").

  Visit my blog at http://www.vmdamentals.com

• Disable vmotion for 1 virtual machine in an ESX host

  Hello

  We have an ESX environment that is configured with vMotion.

  As a result, I've seen VMs from one ESX to another very frequently.

  Among these virtual machines, I have a very critical virtual machine, I want to move to any other host ESX.

  Y at - it an option that I can use to disable VMotion only for this particular virtual machine of mine (in order to keep constant on the ESX on which it is right now) and allow the other virtual machines to continue.

  Appreciate your help.

  Thanks in advance

  I guess that your VMS migrate between ESX servers because configuration automated DRS ESX cluster level. You can replace it for a specific virtual machine. Cluster of right click Select-> "Settings"-> click on options of the Virtual Machine under VMware DRS,. On the right, make sure 'Enable the levels of automation individuak virtual machine' is checked. You can see VMs list below. Select the virtual machine that you want to replace and change the level of automation for people with reduced mobility

• How to add a new virtual machine to the ESX host using the existing files?

  I need to implement a function clone without the use of cloneVM_task. I copied (a special copy) a set existing VM Directory Active Directory to a new directory and renamed copied all files prefix name of the new direcotry.  What task VM (reconfigVM_task, createVM_task or registerVM_task) command can I use to add that the new copied VM on the ESX host? I need to manually update the .vmx for new UUID file and other parameters?

  Thanks for any help.

  I think that as long as you have updated all the names to reflect the new clone you must be fine and on the first step, you will be prompted with a question.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• Upgrade VCSA to 6.0 "error has occurred in retrieving the names of virtual machine from the esx host"

  Get this error when trying to upgrade from 5.5 to 6.0 VCSA. Any ideas on this one? It comes right after that I entered the user/pass/fqdn name for my virtual center device.

  Step 1 relax step 2 use the hostname for your ESXi host target not the virtual center server.

• Help to get a list of virtual machines with switch network and name

  I'm trying to get a simple list of virtual machines on a single host and include their name and networkname.

  When I run this Get - vm | where {$_.} $host.name - eq "ESX.local"}, I get the virtual machines with their name.  When I run this Get-networkadapter - vm Get - vm | where {$_.} $host.name - eq "ESX.local"} I download news network with the name of the network, which is what im after. "  I want to combine these 2 commands and get vm name and network name in a csv.  The network name is the Group of ports, the VM is affected change settings for example, it could be vlan10 or what you named your group of ports in the switch DV.  I've attached a screenshot of the orders successfully.

  Hello, brisketx-

  You could do a little more efficiently by getting first the VMHost (s) that are of interest, then get their virtual machines and then using a computed property for the names of network for virtual machines.  As:

  Get-VMHost esx.local | Get-VM |    Select-Object Name, @{n="NetworkName"; e={(Get-NetworkAdapter -VM $_ | %{$_.NetworkName}) -join ","}}
  

  You can then, of course, lead to Export-Csv to write the data to a CSV file.  How does do for you?

• Script to get 1 csv by cluster with associated information (list of virtual machines, host capacity, IOPS / s...)

  Hi all, I'm new here and it's been days I'm trying to find the right script to the list of virtual machines and related information on each cluster and get 1 csv for each individual cluster.

  Here is my code:

  Get-content C:\cl.txt | % {

  $cl = $_

  Get - VM | Select-Object @{N = 'Cluster'; {E = {Get-Cluster - VM $_}}, @{Expression = 'Host'; Label = "ESX host"}, @{Expression = "Name"; Label is "VM"},

  @{Expression = "Numcpu"; Label = 'vCPU'}, @{Expression = "MemoryGB"; Label = "RAM (GB)"}, "

  @{n = "Provisioned Volume"; e = {[math]: tour ($_.)}} (ProvisionedSpaceGB, 2)}}, @{n = "Use the Volume"; e = {[math]: tour ($_.)}} (UsedSpaceGB, 2)}},

  @{N = "Ops ARE/s/write"; E = {[math]: tour ((Get-Stat $_-stat "datastore.numberWriteAveraged.average"-en temps réel |))} Select - expand the value | measure - average). Average, 1)}},

  @{N = "Ops ARE/s/reading"; E = {[math]: tour ((Get-Stat $_-stat "datastore.numberReadAveraged.average"-en temps réel |))} Select - expand the value | measure - average). Average, 1)}} | Export-Csv - NoTypeInformation - UseCulture 'C:\vm_report_$cl.csv '.

  }

  Note: each csv is generated for each cluster

  CL.txt lists the clusters , but all I get is several files with the same content, and they are not properly renamed

  How can I do to generate 1 csv by cluster ?

  For example, there are 3 groups A1, A2, A3 (in file cl.txt), we get 3 csv files generated individually A1.csv, A2.csv and A3.csv and related data in them:

  A1.csv :                                                                 A2.csv :                                                                    A3.csv

  Host cluster VM RAM (GB) Cluster ESX VM RAM (GB) Cluster Host ESX VM ESX host

  A1 sx0001 su19001 4 sx0001adm 32 su1386adm su10670 A3 iu01990 A2

  Sx0001 su23000 A1 2 A2 sx0001adm su12404 32 A3 sx1385adm su10034

  Sx0002 su55000 sx0002pack sw12785 A1 2 A2 1 A3 su1384adm iu00025

  Help with this script would you gladly.

  Thank you

  Joseph.

  Judging by the timestamp, it seems that these files with spaces between the file name and file type, were made yesterday.

  This might have been one of your previous tests?

  Maybe do a series of tests of the script in an empty folder.

• List of virtual machines in ESX 3.5 Server

  Is it possible to the list of virtual machines and their status in the host server ESX 3.5, connected to the host directly using ssh?

  Thank you to

  Hello and welcome to the forums.

  Check out this discussion.

  Good luck!

• A simple but difficult for me - Power off/on a list of virtual machines

  I know that orders for food and on a virtual machine, but if I have a list of virtual machines in a csv format file, and I want to turn off (not free) and then power back them on, what is the best way to ensure that this is done?  Or even if I want to provide a list of virtual machines, how?

  I thought about it, but has changed some things.  It works fine now.

  Power off

  $vc = Read-Host "Enter the name VC"

  $cred = get-Credential

  SE connect-VIServer $vc - Credential $cred

  $file = "c:\temp\vmlist.txt".

  $vms = get-Content $file

  Get - VM $vms | WHERE-object {$_.} PowerState - eq "Receptor"} | Stop-VMGuest-confirm: $false | Out-Null

  Disconnect-VIServer-confirm: $false

  Power on

  $vc = Read-Host "Enter the name VC"

  $cred = get-Credential

  SE connect-VIServer $vc - Credential $cred

  $file = "c:\temp\vmlist.txt".

  $vms = get-Content $file

  Get - VM $vms | WHERE-object {$_.} PowerState - eq "PoweredOff"} | Start-VM-confirm: $false | Out-Null

  Disconnect-VIServer-confirm: $false

• Try the list of virtual machines by NetworkName, then add advanced settings

  Hello

  I'm trying to connect to a host (not a vCenter), list the virtual machines, select the different networks of those in two, then apply two advanced settings for the virtual machine.

  So far, I have this:

  $vms = get - VM

  SE connect-VIServer $esxi - user $user-password $pass

  {foreach ($vm to $vms)

  If (Get-NetworkAdapter - vm $vm.name |?) {{$_.NetworkName - eq "VLAN70"})}

  New-AdvancedSetting $vm - isolation.tools.copy.disable name-set to false - confirm: $false - Force: $true

  New-AdvancedSetting $vm - isolation.tools.paste.disable name-set to false - confirm: $false - Force: $true

  }

  }

  Disconnect-VIServer $esxi - confirm: $false

  First of all, how I add a second network to verify - if 'VLAN70' or 'VLAN80 '?

  Secondly, there is a smarter way of writing this script?  I'm doors beginning with PowerCLI, but I think even my grandmother could write a better version...

  Any advice would be greatly appreciated,

  -virtualhobbit

  I see, so you could do something like this

  $tgtVLAN = "VLAN80", "VLAN80", "VLAN90".

  SE connect-VIServer $esxi - user $user-password $pass

  Get - VM |

  where {(Get-NetworkAdapter-VM $_ | % {$tgtVLAN-contient $_.NetworkName}) - contains $true} | %{

  New-AdvancedSetting $_ - isolation.tools.copy.disable name-set to false - confirm: $false - Force: $true

  New-AdvancedSetting $_ - isolation.tools.paste.disable name-set to false - confirm: $false - Force: $true

  }

  Disconnect-VIServer $esxi - confirm: $false

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• Virtual MACHINE running on two hosts after hung vmotion

  Hello

  I started a VMotion of virtual machine by host A to host B. The request got hung at 65% for several hours. I restarted the VCenter service, registered to vsphere. The process was running is longer, but now the virtual machine appears on the Host A and host B.

  The Cluster-'Virtual Machine' tab displays the virtual machine and cycles between two hosts seconds couple?

  Anyone seen this before? How can I fix it? Thanks in advance!

  First of all, it's impossible.  A virtual machine cannot be in 2 places at once.  It's just in the transition.

  Secondly, vCenter manages the process but it doesn't actually do the vMotion, ESX hosts are.

  What is happening is life of the virtual machine on the host only until the end of the evolution towards the other host (somewhere around 97%) when the transfer is confirmed with the new host.

  Best thing to do is to restart the services of management on both hosts and see if that frees the vMotion.