little breakpoint

Similar Questions

• Start a defined (such as a breakpoint) Point VI

  Hi people,

  I have a lets say VI (computer state Q model ' ed) with a large number of user input to make. As the development goes further than I want to avoid making the user input at the front.

  Now that I can do this by doing a small thing around, but my question is:

  Is there a way I can set a breakpoint as a "starting point" and safe user input in this breakpoint? The behavior would be like, when I hit the button start the code runs from that point.

  Thank you very much for your advice in advance

  Cheers chris

  Hey u mentioned, by setting default values, is that little thing around things I defenetly will not, as I said...

  IAM aware of the results of the backup "data on the wire" from a given point. Where I see no difference to put data (or the default) in the controls and run a case to handle values, instead of setting a certain point where the code execution can begin.

  In conclusion, if the procedure is always the same, so the same "data on the wire" despite a competitive situation of timing, what iam struggle is not with.

  Anyway, as it is not big thing to do, I guess that the script of sick a little, would probably be a nice try for a jki plugin...

  Thanks anyway

• Breakpoints at a standstill using Java/Eclipse/9000

  Hello

  I am new to Java, please bear with me if this is a silly question.  Earlier today, I was running very well the breakpoints and dandy using the Simulator.  Subsequently each time that the code hits a breakpoint when I step over it sits there for centuries and finally (apparently) falls where dispatcher.

  (If I don't put a breakpoint in the code load and works very well - it also doesn't seem to matter where I put the breakpoint)

  Is this a known problem, or has someone met before and found a way to fix it?

  Thank you very much

  Dave

  Thanks for your reply Mark.  I ended up changing to Eclipse to use Blackberry JDE and everything works again.

  I haven't used Java well before doing so the passage makes little difference to me.

  Van

  Dave

• Slide show is a little too big for phone

  Hello

  I was using one of the models of Muse to set up a site to a friend. I thought it would work well for office and phone, since I have it configured with different breakpoints. It is on a desktop computer, but the phone is a little problem... The pictures on the website are a bit too large seen on a phone especially the horizontal tiles.

  Please take a look at this and let me know what you think I should do...

  Thank you very much.

  is your smallest breakpoint for the slide show (page or master) above 350 widget?

• Muse NOT RENDERING content creation simple widget in all breakpoints...

  I was the construction of office oriented websites with Dreamweaver since the late 90s. Just recently started to use the Muse and if SO is celebrated on the freewheel and is 'simple' 'sensitive' Web design (especially the latest version of) Muse, I find my work with Muse REALLY frustrating.

  I (initially) very excited by the promise of Muse is a Web site design process 'free-form '; and I felt 'better' on investment in software that had the support of an international company like Adobe, long a leader in the development of creative applications that allows users to evolve their visual content that they had ideas inside the head of brewing well enough.

  BUT I had a headache after the landing of building-out/adapt one other prototypes of page -I develop in Photoshop then build in (a very old version of) Dreamweaver - within the Muse now. SEE Imaging Services in Phoenix, Arizona: Photo editing, concept art and Lightroom training (Currently only the 'editing' and 'Skunkworks' Dreamweaver-built prototypes are powered and the link to the Company of Lightroom Phoenix works as well. And please NOTE: these pages work very well in multiple desktop browsers, as well on my fone chip so to load quickly even with WiFi a little lame on Chrome for Android.)

  - I'm thinking that each landing in MM-dot-com page will have a different 'look' that each gallery covers distinctly different content of imagery. It is my hope (from everything I read, all the promotional content, I looked on Muse - in particular the most recent update) I was going to find a more responsive and intuitive application to help me in creating pages to current content that I change my prototypes to achieve this goal.

  - It has always been my intention to keep my 'simple' sites and to build the navigation between the pages to be intuitive for the visitor; all animations - mainly rollovers, same rollover events complex (once again for Office display) as I've built here > The Book - chapters: roads, landscape, "Americana", Essays, links and more. Explore. intelligible, not wearing not too much like Candy for the eyes. My target 'public' is the other 'creative', busy people ready to explore, but not become overloaded on "cookie crumbs" in order to see what has prepared a website designer 'visionary' too clever-by-half. Nobody is going to find the patience for this.

  Now - all that said, here's the gist of my post:

  - In a couple of my galleries, it will be important for me to show the 'before' and 'after' versions of an image. (Exclusively Office days bearings worked very well, not so today with touch screens.)

  - So on a couple of separate pages image-the extension, I'm building, I thought using one of "before - after' widgets built by the community of people craft extensions to add content to Muse of coding." In this case, I used "WidgetsForMuse script. (It is quite functional. It's simple. It works as I would like to only it.)

  - HOWEVER, then the widget performs its function perfectly full screen in my desktop browsers that I reduce the viewport to simulate '1024', '786' and small breakpoints that the widget is unable to continue to operate. (Once again, please NOTE: have I not continued to experience a number any other strange events [cross-browser] as I did the other, different [really very "tame"] setting page designs in the efforts of my last month to understand how Muse 'works' so instead of bring this example to the first WidgetsForMuse people, I feel more like there is a problem-oriented Muse more and) ", as such maybe someone else has experienced anything like what I see with my work here.)

  I included a link to this short vid "unregistered" I posted on my Youtube channel for you guys show what I'm running in > problems with Widget - YouTube

  I can certainly describe, explain and post additional-screenshots, maybe another short screen cap of vid how Muse makes my creations page illustrating how Muse seems ' does not not his promise "in future discussions.

  Thanks (in advance) for your suggestions and perspective. mm

  I have the final solution ready to try here:

  Please resize the browser through all the breakpoints 1248/1024/680/480 to see how it works.

  The Widget will be updated Monday (widgetsformuse.com)

  You are able to use as many different 'before - after widgets' as you want on a single page.

  You can leave 'fully sensitive' or set the width at each breakpoint.

  Hope you like it.

• 3 breakpoints - desk and telephone

  I need to know how to get around this problem. I designed the site using 3 320,600,1440 breakpoints.

  children are intended for tablets and phones.

  And the biggest for desktop computers and more.

  but the problem is when I am posting on my ipad pro compressed it views the desktop version.

  in turn, that means that I don't get to see the background video that does not work on tablets. (real bad luck).

  so to compensate for this problem I was jumping to tell other break points to load on the Tablet, or by phone.

  y at - it sort of dedicate a breakpoints to devices.

  right now on my shelf I just get a white screen door and see nothing.

  (btw. I loaded a background image in the browser to counter the problem, but it does not work,

  the site continues to see its on your desktop)

  like the video widget background, but a little ridiculous that it does not work on tablets.

  any suggestions out there

  [Moved from the endorsement, general, all Adobe forum lounge in a product specific support forum, but I had to guess on the product, inform the moderators if it must be moved to another forum - Mod]

  Hello theheadmaster,

  There is no relationship between breakpoints and the device overview site.

  Breakpoints are just to set the display of your content on different screen sizes.

  If the background video does not play on your iPad, it looks like a compatibility issue.

  However, can you please give me the link to your site, so that I can have a thorough on this subject check?

  Kind regards

  Ankush

• Problems using Preview in the browser to set breakpoints

  I have Muse CC 2015 1.2.44.

  I do the tutorial of web site reagent in which the instructor shows how pin and set breakpoints.

  In this tutorial, she uses Site Preview in the browser as a way to drag the right edge along to see how the layout works in different widths. She has something she calls the browser tool, a little trick with a digital display which gives you the width of the browser, or the width of the page, where you drag it. It is a tiny digital display.

  When I preview, using Chrome, this gadget is not displayed, and the other pages of the site have tabs. Thus, even if the maximum size is set to 1200, the screen is filled.

  Any ideas on what this could be. I tried Firefox and it was worse.

  When you preview the site in a browser, it replicates how it will appear when published. It's something that you will need to add Muse does not add the Chrome extension used in the demo. Browser search width facing Extension Library.

  I hope this helps.

  David

  Creative muse

• Why objects appear in different positions when I change breakpoints?

  I have three objects .svg and some text boxes, I put in my biggest resolution breakpoint.

  When I change to the next breakpoint, the objects are near the top of the other, instead of beeing in the same position as the original stopping point.

  Is there a way to avoid this?

  Perhaps my last posting in this thread illuminates a little on this:

  Re: Responsive & supervised all grouped vertically on the other breakpoints? Bug?

  Try the following: create a new sensitive page, place some objects and aferwards create the new breakpoint. Now, you see, that your objects are positioned as expected.

• How to resize slideshow in breakpoints?

  As the slideshow widgets are not yet adapted in Muse CC 2016 it has bee recommended to resize a slideshow in each of the designated stopping points. Does anyone know the recommended procedure to achieve this? My layout starts with a 1200 px width and a standard slideshow (hero image and controls container below thumbnails). I have four breakpoints that reduce the size of phone 320 px.

  There is a main container for the widget slideshow that you see a medium gray box around it. It includes the image of hero, controls, and the thumb container. You can enter this whole container 'box' and move the slide show but you it seems not possible to the size of the container any widget, I can only move around.

  If I click a second time on the image of heroes that you have the four corner of the white adjustment handles that allow you to move and resize the image. BUT... I noticed that when I do this in one of the smaller breakpoints that it will also change, it appears in the original breakpoint (1200 px), and I don't want to do that.

  So, I'm trying to learn the method the best and most direct way to resize the slide show and its parts in different breakpoints, without changing the way it appears in other breakpoints.

  Anyone has experience working with slideshows in breakpoints in the new version of sensitive Muse?

  As you are dealing with non-responsive elements, I recommend the approach I have described here: Re: combination of fixed and fluid page in a site width

  If possible, keep your breakpoints set, and work from the largest to the smallest. Make sure that the width of the slideshow is at least slightly less than the width of breakpoint underneath. You need to resize all containers in each consecutive stop point, however. There isn't a way around that.

  There is a main container for the widget slideshow that you see a medium gray box around it. It includes the image of hero, controls, and the thumb container. You can enter this whole container 'box' and move the slide show but you it seems not possible to the size of the container any widget, I can only move around.

  That is right. The widget always behaved this way. You must resize all containers individually.

  If I click a second time on the image of heroes that you have the four corner of the white adjustment handles that allow you to move and resize the image. BUT... I noticed that when I do this in one of the smaller breakpoints that it will also change, it appears in the original breakpoint (1200 px), and I don't want to do that.

  This is unusual, and should ' t be the case. Can you send me your file of muse to take a peek?

  Regarding your difficulty to grasp the new updates - I get it. I spent so much time trying to understand how the best book everything, and it does not require a change in thinking. Remember that just because something can be sensitive, does not mean that it should be. Sensitive breakpoints have a sense in some scenarios, and they are not in others. Thinking about breakpoints fixed as you ALT layouts and use them in a similar way. Use as little possible breakpoints. I got confused on how to use them by watching educational videos. They show the user an office site, cleaning up the break and a drop point, it. It is more a demonstration of how it works, that a better scenario practice. Just like you, imagine how you want the site to look into the desktop, Tablet and mobile and then build accordingly. Use sparingly responsiveness, where it makes sense. TI my current project, for example, I have three breakpoints: 1250, 800 and 500. My site won't break until it hits the variance of crazy resolution in mobile devices, so I have my minimum page on my BP size more small 320px, which my entire page is built to adapt to the value. In the case that someone is using a low-resolution screen, I have my adapted dimensioning, the value of the text elements, whereas they are attached in the rest of the site. In this way, I know that my site will not break until it hits 320px lower resolution, and then I asked my items just in case the responsiveness. Pepper responsiveness in an emergency plan, rather than building for him initially.

  One last thing: don't forget that you can cut and paste items within a text box if you wish. They will be shuffle in rows like re-sizes of cans.

• Muse sensitive breakpoints and the time download

  Hey guys

  I'm using the new feature with the breakpoins to a respoinsive site (and its great)

  After I have upload the site on the server im having a problem that the site is really slow download (take it more photos then 10 sec)

  little help from a friend, I checked the loading time of everypart of the location and the apperently load together all breakpoints (I have 7 break points for her im like 7 loading sites)

  you have a function or something (like css support queries) which loads the relevant width size every time or something to fix this?

  Thank you very much

  Adam

  You discuss the new draft version of Muse in a public forum. Details of the draft are still covered by the agreement of non-disclosure admitted to participate in the beta program. Please repeat your request to http://museprerelease.com

  Thank you.

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• you want Sierra installs when you request the necessary to install a little help access/password?

  I got this twice today.

  First when you install the new version of Safari and now during the installation of Sierra.

  The GUI gets up and asks the system password install a little help.

  Any idea?

  George

  Don't feel alone, it is part of the upgrade package. The assistance program has helped the new feature to Siri to connect with the Apple servers.

• Re using the little Apple tv box

  Bought recently on tv - small box Apple.

  The initial surprise, it's that I can't play a program of BBC iplayer on my iphone on the TV.  It works like this, but why are there no BBC iplayer apple TV box menu option? ITV Hub option or?

  Seems a little awkward.  I tried the advice and thus not considered a way to download an iplayer app or a hub ITV app directly on the apple for direct access TV menu without using the iphone there is no access to the app store in the menu. Instructions to access the app store seems to be for an another apple tv box.

  Any suggestions on this?

  There is only a single Apple TV which has an app store, so it looks that you have a previous Apple TV that does not have an app store.

  Applications are integrated to the Apple TV earlier, they don't include hub of BBC iPlayer or iTV.

• is a little late to everything clash of clans after ugraded to ios 10.0.1... help me please...

  After having upgraded to ios 10.0.1 I found that there is little lagg playing the clash of clans... Please help me

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again? you won't lose data by doing this, but it can cure some problems after installing new software.

  SLA ensure you have the latest version of the installed application.

• I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  Yes. You may be victim of a scam, except if you are connected to your business with this requirement.

  Change your password immediately below:

  https://appleid.apple.com.