LiveCycle ES2 - text field empty multiple lines deleting data entry for clients

Similar Questions

• Multiline text field where does not align data entry

  I ran into this many times and I have not be able to find a solution. I work with an existing paper form that has a descriptive text on the left that partially fills a line. At the end of the sentence, the line is half-filled and the entrance area starts immediately thereafter. The continuous form then allow text entry, but now line 2 is entirely justified to the left. Here is an attempt of a Visual:

  Tell us a lot about yourself: _

  ________________________________________________

  ________________________________________________

  If I put a large box on all three lines that is framed on the left, then the seizure highlighted area covers the text of the question, and the values that are entered in the box to write on top of the text.

  If I put the box on the right, any input is limited and seems weird when printing.

  I have always just made two text boxes. A short and the other who will the width and the text wrapping. I hate to run, but I wanted to make sure that my question has been understood. Thanks for the ideas you have there

  It is the only possible solution.

• Display multiple lines of data collection defined by the user in an e-mail message

  I created a collection defined by the user that displays several lines of data. I created a custom rule and have linked this collection set by the user to this rule and configure an e-mail action. Variable Seveity, I have defined it in the rule to contain the column values. But it will only contain the first line of data. How can I display multiple lines of data in the alarm itself as well as the e-mail? Any help is appreciated.

  The example query in the collection defined by the user is less;

  Select the type, status, queuename, count (*) from PSAPMSGPUBHDR

  Union

  Select the type, status, queuename, count (*) from PSAPMSGPUBCON

  Union

  Select the type, status, queuename, count (*) from PSAPMSGSUBCON

  Result:

  Number of status type Queuename

  -------                 ----------------------                        ----------                           -------------

  HDR profil_utilisateur error 1

  PUB                  PERSON_BASIC                    New                                 4

  PUB WORKFORCE_SYNC error 1

  -3 rows

  I have defined the variables of gravity and the alarm message is something like this; (It is fetching only the first row of data) how do I loop through to get all the rows of data and display it in the message of alarm/email (alert) action must be written of the groovy script code to achieve this goal? If Yes can you please provide me examples?

  Alarm message:

  "Request message queue is:

  Type: @UDC_type

  QueueName: @UDC_queuename

  Status: @UDC_status

  County: @UDC_count

  Thanks in advance

  JAI

  Hi Jay,.

  fine I could help you. Please mark the thread as "Answered" when the issue has been resolved and do not hesitate to open a new thread for questions.

  Concerning

  Jochen

• I want to sell my items in photoshop and so I would like to delete my entry for this product in my adobe account. How can I do this?

  I want to sell my items in photoshop and so I would like to delete my entry for this product in my adobe account. How can I do this?

  Resale of Adobe software

  ------------------------

  http://helpx.Adobe.com/x-productkb/policy-pricing/transfer-product-license.html

• How to add an animation to a text field with two lines?

  I have a text field with two or more lines. Why is it not possible now to apply a text animation?

  Animating text, by design, only works on a single line of text.

  To use it for multiple lines, you can either create two separate titles or keyframing to create your own animation effect.

• Cannot get 'IN' text field with multiple values.

  I have a text field (P11_SERIAL_NUMBERS) someone would use to enter multiple values (i.e. of the serial numbers). I tested various methods but can't seem to get anything working. I used values such as ' 12929', '19191' or ('11919', ' 19192 ', ' 1111') or 12121,121333.»
  
  I have to analyze this area after the entrance is and update P11_SERIAL_NUMBER to something like ("121212 ', 121211', '292929'). The report is a SQL query returning the body of a PL/SQL function. I build the query in an anonymous block to something like the following:
  
  SELECT apex_item.checkbox (1, instance_number) Ins,.
  apex_item. Text(2,i.instance_number) instance_number.
  apex_item. Text(3,i.item_number) item_number.
  description of the apex_item. Text(4,i.Description),
  Serial_number apex_item. Text(5,i.serial_number),
  i.party_name,
  i.status_name
  Cycsi_item_details_v I have
  WHERE i.item_number IN (SELECT v.item_number FROM cycsi_installed_base_v WHERE v.serial_number = i.serial_number v)
  AND i.item_number AS NVL ('%' |') XLA' | ' %','%')
  AND NOT EXISTS (SELECT d.item_serial_number FROM cy_fco_d, d WHERE d.fco_id = 2803 AND d.item_serial_number = i.serial_number) AND i.serial_number IN ('61763 ', ' 61621');
  
  However, when I enter several values that nothing ever went back to the SUMMIT even though the SQL query returns more rows. I run the application in debug mode and it seems to show the values correctly.
  
  0.11: show report
  0.12: determine the column headings
  0.12: analyze the query such as: TRAFFIC
  0.15: binding: ": P11_MODEL_NUMBER"= "P11_MODEL_NUMBER" value = "XLA"»
  0.16: binding: ": P5_FCO_ID"= "P5_FCO_ID" value = "2803"»
  0.17: binding: ": P11_SERIAL_NUMBERS"= "P11_SERIAL_NUMBERS" value = '(' 61621', ' 61763')""
  0.19: print the column headings
  0.19: loop lines: 15 rows
  No data found
  
  If I add only a serial number at a time as the APEX application returns the line correctly.
  
  
  Does anyone have an idea what I'm doing wrong or what best way to solve this problem?
  Thank you
  John
  
  Published by: Jennifer on July 13, 2010 15:23

  Hi John,.

  I just tried a report region based on PL/SQL query encoded using your method to refer to element names in the query string of back:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in :P2_ENAMES';
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  As I suspected, he did not work for me P2_ENAMES was ('KING') or ('KING', 'SMITH'). I think it's because of the reason for which I gave in my previous post - ApEx passes off the coast of the dynamic execution of SQL string, it does not automatically replace the mention: P2_ENAMES with the value of the element. I don't know how it can work for you.

  If I change the code I proposed:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in ' || :P2_ENAMES;
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  It works very well if one or several names are specified.

  I took a blow to modify your code for the construction of the query string - does not immediately guarantee, it'll work because I can't test (might be missing a parenthesis or quotation) it but you should get the idea:

  -- start with initial valid query that ApEx can parse to determine column names
  q := 'SELECT apex_item.checkbox(1, instance_number) ins, apex_item.text(2, i.instance_number) instance_number,
               apex_item.text(3, i.item_number) item_number, apex_item.text(4, i.description) description,
               apex_item.text(5, i.serial_number) serial_number, i.party_name, i.status_name
          FROM cycsi_item_details_v i
         WHERE i.item_number IN (SELECT v.item_number
                                   FROM cycsi_installed_base_v v
                                  WHERE v.serial_number = i.serial_number)';
  
  -- add model number condition if specified
  if :P11_MODEL_NUMBER is not null then
     q := q || ' AND i.item_number LIKE ''%' || :P11_MODEL_NUMBER || '''%''';
  end if;
  
  -- add serial numbers condition if specified
  if :P11_SERIAL_NUMBERS is not null then
     q := q || ' AND i.serial_number IN (' || :P11_SERIAL_NUMBERS || ')';
  end if;
  
  -- add FCO id condition if specified
  if :P5_FCO_ID is not null then
     q := q || ' AND NOT EXISTS (SELECT d.item_serial_number
                                   FROM cy_fco_d d
                                  WHERE d.fco_id = ' || :P5_FCO_ID || '
                                    AND d.item_serial_number = i.serial_number)';
  

  I know that has focused on getting this code works, but I would be remiss in my duties if I didn't at least mention the risk of SQL injection. You may already know this, but unless you do a good job to validate the values of the element used in the query, you could open yourself up to a SQL injection attack. For example, imagine what that would be returned if a hacker sharp entered "12345) GOLD (1 = 1" in the field of P11_SERIAL_NUMBERS - you would get all that may or may not be a security problem.

  Hope this helps,
  John

• Count of the text fields empty

  Hello. I'm looking for a way to count empty text fields in a pdf form and have the result automatically entered in another field in the same form. Thanks in advance for your help.

  OK, here's a simple custom calculate script for a text field that displays the number of empty text that are named "nº1' - 'num.10: fields

  // Custom Calculate script
  (function () {
  
      // Initialize sum of blank fields
      var sum = 0;
  
      // Count how many fields are blank
      for (var i = 1; i < 11; i += 1) {
          if (!getField("num." + i).valueAsString) sum += 1;
      }
  
      // Set this field value to the sum
      event.value = sum;
  
  })();
  

• Inside Movieclip text field empty created dynamically

  
  Hello.
  
  My goal is to have a button that, when clicked, an empty movieclip is created and a text field is attached to it.
  
  I could write easily as if the instance is newly created namespace where hard-coded, the problem comes with the syntax to generate dynamically.
  
  Here is the code I have so far:
  
  ActionScript code:
  
  button.onRelease = function() {}
  createText();
  }
  var count: Number = 1;
  createText = function () {}
  _root.createEmptyMovieClip ("PlaceHolder" + Count, this.getNextHighestDepth ()); This ["placeholder" + count] .createTextField ("my_txt" + count, this.getNextHighestDepth (), 100, 100, 100, 100); Count ++;
  }
  
  
  Once it's done I still need to assign a text value in the text field, which I have no idea on how to do...
  
  In other words, I want to do something like:
  
  placeholder [count] .my_txt [count] .text = 'my text ';
  
  
  I hope that this isn't confusing... Any help would be greatly appreciated.
  
  Thanks in advance!

  :

  This ["placeholder" + count] [my_txt "+ count] .text = 'my text ';

• Check if the number in a text field will evaluate to a date format

  I have a field FieldA, which contains 6 numbers, (even if the field is a text field). I need to know if that evaluate the numbers from the field to a real date in MMDDYY format. For example, if FieldA contains 060110, which would evaluate then to a real date from 01/06/10. However, if FieldA contains 130110, so this isn't a valid date and the test will indicate accordingly. I was thinking about using a case statement, but unsure of how to test if the numbers are evaluated to a valid date...
  
  Sort of:
  
  BOX WHEN FieldA = 'Date valid' THEN FieldA TO_DATE(FieldA, 'mm-dd-yyyy')
  
  Any help is appreciated...
  
  Thank you...

  /* Formatted on 11/14/2011 4:03:53 PM (QP5 v5.149.1003.31008) */
  CREATE OR REPLACE FUNCTION validate_date (in_dt VARCHAR2)
     RETURN VARCHAR2
  IS
  BEGIN
     FOR c IN (SELECT TO_DATE (in_dt, 'mmddrr') x FROM DUAL)
     LOOP
        RETURN 'Valid Date';
     END LOOP;
  EXCEPTION
     WHEN OTHERS
     THEN
        RETURN SQLERRM;
  END;
  
  --------------------------------------------------------------------
  
  WITH t AS (SELECT '060110' fieldA FROM DUAL
             UNION ALL
             SELECT '130110' FROM DUAL)
  SELECT CASE validate_date (fieldA)
            WHEN 'Valid Date' THEN TO_DATE (fieldA, 'mmddrr')
         END
            col1,
         validate_date (fieldA)
    FROM t;
  

  COL1     VALIDATE_DATE(FIELDA)
  6/1/2010     Valid Date
       ORA-01843: not a valid month
  

  Published by: pollywog on November 14, 2011 16:03

• How to filter a text field empty in Lightroom

  I would like to see all my pictures that are not (yet) have a title. Text filter options do not include a choice of 'empty '. Any ideas how to do this?

  Do you it by searching for photos that do not contain an e i o u (or more characters if you want). Yes, I know it's ridiculous, but that's all you can do.

  As an alternative, look for my search and replace plugin and its analysis and control audit (that you can use without having to buy the plugin). It adds to the filter library.

• How can I change the pdf file cannot be modified, but hold down the scroll button for the form fields with multiple lines?

  I need all the information to display so I need the scroll key to work, but it is not editable.

  Thanks for the help!

  Tania

  You can define a field with strike and validate to prevent the user from changing the value of the field. First, set the field to multiline and 'Scroll long text' and the default value for the text to display in the field. Then add a custom script to strike which is:

  Custom keystroke script

  Event.RC = false;

  and to be complete, the validation script customized according to:

  Custom validation script

  If (event.value! == event.target.defaultValue) event.rc = false;

  These scripts will prevent the value to be changed, at least in Acrobat and Reader if JavaScript is enabled.

• Tab Leader points to the text that spans multiple lines

  I have a numbered list with large amounts of information in what is connected by points of the leader.  It's a mush very such as a table of contents or a restaurant menu (for example "name of the dish"... $ price).  My case, however, has a simple shade which breaks everything and is not explained by the conversations or documentation that I could find via search this forum and in the rest of the web.

  What happens if the leader points lead to something that does not fit on a single line?

  Here is an example:

  

  Basically, what I need is for everything between the tab (which generates points of the leader) and the end of the paragraph (when I press Enter) to stay on the right points.  Do not let my small silly example, lists, I care are very long and subject to the order of drastic change.  Certainly, there must be a way to do this, but I'm completely lost.  I considered just it winging and putting things in their own areas of text and force alignment manually through various methods.  But still there are very many content and order him will almost certainly change, so I want to keep everything in a changeable, easy to work with the format.

  Thanks so much to anyone who might have seen or advice on what to do!

  The only thing I can think immediately would be a big left indent on the model numbered with a corresponding left out-tooth of the first line end up with something like this:

  

  But I know when I played, I killed the leader of the dowry, but hey, I was clicking faster that the brain could keep up...

  Mike

• Single field into multiple lines of cutting

  
  Hi all

  with res in the

  (select 10 as id, 'history of medic' as the title of double union )

  Select 20 as id, 'hospital of oklahoma heart' as the title of double union

  Select 30 as id, ' Date/time end " like double title " )

  Select disitnct

  a.ID, a.title

  res a

  Output of the above code:

  ID TITLE

  10 background medic

  Heart 20 oklahoma hospital

  30 latest End Date/time

  Here's my task, I need an output like below.

  ID TITLE

  10 past

  10 medic

  10 history

  20 oklahoma

  heart 20

  Hospital 20

  30 last

  30 end

  30 date/time

  Thanks in advance.

  A simple search can do wonders for you

  https://community.Oracle.com/search.jspa?q=string+to+row&place=%2Fplaces%2F1265&depth=all&customTheme=OTN

• How to make readable text fields after the filling of data

  Hello
  
  Once we get the data in the message text entry fields, we have a few only readable areas.
  I tried to make these fields as readable as follows:
  
  In the property inspector Table RN, I changed the functional property of 'Read' only True value
  But in the custom OAF page, text box is missing for this field.
  Could someone help me how to do this?
  
  Thanks in advance
  Nanoo

  Hi Nanoo

  Here's the modified code, you can use

  public void setReadonly()
  {
  XXIDVOImpl vo=getXXVO1();
  Row poRow = vo.first();
  for(int i=0;i
  

  I hope that helps!

  Thank you
  AJ

• resize the text field or table row, column data

  Hi all

  I am facing a problem, not able to display all the data in the table when the data is larger than the height and width of the cell

  Is it somehow so that the line and deposited text get automatic size according to the data.

  Thank you

  Abhijit

  Usually, you must expand to accommodate for the height and width of the TextField. If you check this box, the textfield will be autosize, itself based on data at run time.

  Thank you

  Srini