Load the file vidlist.xml with ActionScript

Similar Questions

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot load the file MatLab

  Hello

  I am trying to load a MatLab file using DIAdem 2011.  I downloaded the plugin from data from the Web site of NOR and installed.

  When I try to load a *. MAT file I get the following error.

  Unable to load the file "C:\Documents and Settings\All Users\My Documents\SignalExpress Data\08062012_104428_AM\voltage_current_ni_test1.mat" with the charger "MatLab."

  Additional information:
  Impossible to copy a block of data from the file 'C:\Documents and Settings\All my Data\08062012_104428_AM\voltage_current_ni_test1.mat Documents\SignalExpress' in the internal data.

  I never had any other use, by using plugins for DIAdem until I tried to condition a *. MAT file.

  Hi, smooth,

  MatLab use worked very well in the past.  My best guess is that this particular *.mat file may contain some data types (3D arrays, structures, etc.) that are not yet supported.  You have no way to verify what are the types of variables are stored in the *.mat file?  MatLab use works with all other *.mat files you have?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Load a file in tiara with a use using LabVIEW

  Is it possible to load a file into tiara with a use that is customized by using LabVIEW.  I looked through the palette and see nothing.

  Hi Siriusly,

  I've added 2 additional lines of configuration of trainer to the use, and now that the last row of empty values has disappeared from a single file you sent me.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Muse is unable to load the files, only on the main computer

  Hi all

  I wonder if anyone has experienced this before, or has ideas on how to solve this problem.

  Worked on a site yesterday.  Hibernated as usual.

  Have went to use the program today to find that it hangs on the bird's eye view on any Web site file I load.

  No errors, it remains just completely inadmissible and needs to be forced to leave.

  The strange thing is my carry around portable can load the file perfectly (the same exact, located in a network Bank).

  I tried to record a new version of the computer that works.  My main computer crashes again.

  I tried to load the file into the pre-release, always falls down.

  I tried uninstalling the computer.

  Restart the computer.

  Installation.

  Still crashes.

  Tried to move the files locally.

  Still crashes.

  I checked the Windows Update, it did not do anything in this period.

  Am quite perplexed.

  Any suggestions would be greatly appreciated.

  I thought I'd try the system restore in Windows to see if it would help.  Went to restore a file from 2 days ago.

  System restore corrupted my Windows even more and because my main drive was Bitlocker protected, he has me very very grumpy and Windows was over.

  30 minutes of trying to fix, my computer now has a new installation of Windows.

  The good news is that muse is working again.

  TL:Dr: If you have a problem with Muse, wipe your entire computer, it suits him.

• Create the file prov.xml of origin for Provisioning Toolkit Enterprise?

  How to create the file prov.xml of origin to be used with the Setup Toolkit Enterprise? This is intended to resovle the question with serialization of deployments of Creative Enterprise Cloud break during imaging. Several people reported trying to reserializing with PTE.

  Hi msdavidson,

  Follow this KB for Adobe Provisioning Toolkit article.

  http://helpx.Adobe.com/creative-cloud/Packager/Provisioning-Toolkit-enterprise.html

  Hope it meets your request.

  Kind regards

  Abhijit

• Parse error the file "clients.xml" Server "SERVER IP"...

  Hello

  no idea why I get this error:

  Parse error the file "clients.xml" Server "SERVER IP". Logon will continue, contact your system administrator.

  and after pressing the OK button, I get another error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception

  When I try to connect to ESXi 4.0 with vSphere client?

  My clients.xml file content (https://SERVER IP/client/clients.xml):

  & lt; ConfigRoot & gt; ------& lt; ClientConnection id "0000" = & gt; ------& lt; authdPort & gt; 902 & lt; / authdPort & gt; ------& lt; version & gt; 4 & lt; / version & gt; ------& lt; exactVersion & gt; 4.0.0 & lt; / exactVersion & gt; ------& lt; patchVersion & gt; 1.0.0 & lt; / patchVersion & gt; ------& lt; apiVersion & gt; 4.0 & lt; / apiVersion & gt; ------ & lt; downloadUrl & gt; https://*/client/VMware-viclient.exe < /DownloadURL & gt; ------& lt; / ClientConnection & gt;-& lt; / ConfigRoot & gt;-

  Thank you

  I bet you're under Windows 7. The customer is currently divided on 7 and compatibility modes will not help. The frustrating bit is that it works on Vista.

• The file is signed with a digital signature that is broken, published by: Mozilla Corporation.

  My anti-virus gives me the following message is displayed:
  "C:\Users\MArendas\Downloads\Firefox Setup 13.0.exe"; "The file is signed with a digital signature that is broken, published by: Mozilla Corporation. « ; » »
  Why and what do I do about it?

  Go to your download folder (click Start, click the account name above 'documents' then click on 'Downloads'. Remove it from there.

• Could you please tell me the name of the program that plays the files (mp3) begins with V and resembles a cone orange and white?

  Could you please tell me the name of the program that plays the files (mp3) begins with V and resembles a cone orange & white?

  VLC.

  http://www.videolan.org/VLC/

• The file is signed with digital signature is broken, published by: VideoSoft

  When I run the antivirus it comes up with the following legend:

  The file is signed with a digital signature that is broken, published by: VideoSoft
  

  Windows\System32\Vsflex6.ocx

  Help

  Thank you

  Hi Charlydue,

  A digital signature is an electronic security mark that can be added to the files. It allows you to verify the Publisher of a file and helps verify that the file has not changed since it has been digitally signed.

  If the file does not have a valid digital signature, has no way for you make sure that the file is actually from the source, of what he wants, or that he didn't has not been tampered with (possibly by a virus) since its publication. It is safer to avoid opening the file unless you know for certain who created it and if the content is safe to open it.

  Even a valid digital signature does not verify the content of the file is harmless. You need to decide if you should trust the contents of the file based on the Publisher's identity and where you download the file from.

  Try upgrading to the latest version of VideoSoft and check if the error disappears. Also, contact the software vendor for assistance.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to parse the file config.xml - bad xml structure

  I'm doing a simple application for blackberry phones.  I used the code on the site of dev on creating your first application.

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "1.0.0.0" >
    DevBlog
    BlackBerry Developer Blog
   
  email = '[email protected]' > John Doe
   
    http://devBlog.BlackBerry.com"/ >
   
  

  I edited it for the site we want to and other details as follows:

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "1.0.0.0" >
   
   DeVryUniversity 
   DeVry University Library 
   
  email ="[email protected]" > Danny coats "
    
   http://library.DeVry.edu/cgi-bin/Pwebrecon.cgi?DB=local&page=first"/ >
   
  

  It gives me the following error when I compile it:

  C:\Program Research In Motion\BlackBerry WebWorks Packager > bbwp "C:\Users\".
  Danny Coats\workspace\applications\DeVryLibrary\DeVryLibrary.zip.
  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive application
  [INFO]                  The analysis of config.xml
  [ERROR]                 Impossible to analyze the file config.xml - bad structure XML

  I use Windows 7 Professional and the latest version of the SDK of Blackberry WebWorks.  I find nothing in the community for this to solve.

  Any suggestions will be greatly appreciated.

  I had the same error when you try your config.
  So, I try to analyse.
  I found the error is in the value of the content item, you must:

  http://library.DeVry.edu/cgi-bin/Pwebrecon.cgi?DB=local&page=first

  and should be:

  http://library.DeVry.edu/cgi-bin/Pwebrecon.cgi?DB=local & page = First

  If the special characters in the URL must be converted to their html entities.

• When copying a file in flash memory, a shortcut of the file is created with! Why is this happening?

  When I copy a file in flash memory a shortcut depending on the size of 1 KB from the file is created with the original?

  is this a virus?
  What is the solutions for that?

  Sorry, I misread your question. I thought that you receive only a shortcut.

  I don't know what would cause. Have you tried with another flash drive? Have you tried to format the flash drive that you use, when there is nothing on what you need?

  It won't hurt a thing to check for malware. Download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• message error "the file is associated with another photo in the catalog.

  CC of LR, windows, photos on external hard drive

  Files that I was still using yesterday now are more connected to the catalog.  Try to locate the files I get the message "the file is associated with another photo in the catalog. How can I find and solve.

  Thank you

  This is because this same image, same time date and time of the device, is already in the catalog using a different file name.

  Conversely having not happening again is to STOP Renaming files on import or manually in the file manager or with another image, software.

  Each camera has a system that can be customized if necessary if you have 2 cameras of the same brand and model of separate file naming. And even then, they are separated by the serial number of each camera.