Loading files problem
Hi, I can try to load files from a server, but don't bring them to my computer.
Thank you for mailing - me. This is the server of the company of the problems. Now, their problem is resolved and so is mine.
Lena Eklund
Tags: Acrobat
Similar Questions
-
This has happened to me for a while now.
I start the computer, if I forced mode it asks if I want to get into the Safe Mode, Mode safe mode with networking or normally.
I usually go on the network in safe mode, because of the error on blue screen on Normal I have to fix ABC.
He says "Windows is loading files", does microsoft thingy loading then the screen becomes larger, as if it was in safe mode, but it will start up repair.... Research of the problems... Windows cannot repair this computer automatically... For the 40th time. "If you have recently attached a device to this computer, such as a camera or music mobile game -" Hey... I just want to play Xbox Live.
I'm done, it restarts and repeats continuously.
I tried all the stuff the other forums effing threw on me, but they were not much help.It's the Toshiba forums, I should have here tried everything first... but can someone PLEASE help me?
Hello
Using Win 7?
Usually the Win 7 and Vista as well supports some repair options.
Start Notepad, press F8, and then choose the first option called fix my computer.
There you should find some settings of repair.I worst case you could recover the laptop using a HARD drive recovery option (located in the repair of my computer if available) or you can use your Toshiba Recovery disk to reinstall the operating system.
Welcome them
-
Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108
I have an app VS c# that references the assembly OR world. It worked fine in 32-bit Windows XP environment. However, when I installed and ran the application in the Windows 7 64-bit environment. The app was the following text:
System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
"File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform? It's the same application binary.
Thanks for your help!
Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.
-
I'm fighting this problem for days (euphemism)...
I used to work, but now isn't an installation package. I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI. I put everything ' x 86.
The list of dependencies in VS2010 is illustrated in the attatched screenshot.
The text of the mistake of trying to run the application on the target computer is lower in italics.
Of course, I could use some help on this! Thanks in advance.
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
File name: "NationalInstruments.DAQmx.dll."
at IPClientTest.MTF_Supervisor.mainSstart13)
at IPClientTest.MTF_Supervisor.mainStartByParts)
at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick (EventArgs e)
at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
at System.Windows.Forms.Control.WndProc (Message & m)
at System.Windows.Forms.Label.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
MTF_Supervisor
Assembly version: 1.0.3.3
Win32 version: 1.0.3.03
Code: file:///C:/mtfDebug/MTF_Supervisor.exe
----------------------------------------
System.Windows.Forms
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MTF_ClassLib
Assembly version: 1.0.1.0
Win32 version: 1.0.1.0
Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
----------------------------------------
NationalInstruments.UI.WindowsForms
Assembly version: 13.0.40.242
Win32 version: 13.0.40.242
Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
----------------------------------------
NationalInstruments.UI
Assembly version: 13.0.40.242
Win32 version: 13.0.40.242
Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
----------------------------------------
NationalInstruments.Common
Assembly version: 13.0.40.188
Win32 version: 13.0.40.188
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
----------------------------------------
System.Web
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
System.Core
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
NationalInstruments.Common.Native
Assembly version: 13.0.40.188
Win32 version: 13.0.40.188
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
----------------------------------------
System.Xml
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Design
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
----------------------------------------
Accessibility
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------Salvation Lorne.V.,.
Exactly how you install OR DAQmx on the target computers? Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.
You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines? And you have the same version of DAQmx on both machines?
Kind regards
-
He saids load files from memory to print later in my print spooler how to get out or remove it
my printer will not print when I services, then in this print spooler TI saids load files into memory to be printed later.how have removed that my printer can print
Hi Jorgecajigas,
1. What is the operating system installed on your computer?
2. What is the brand and model of your printer?
3 is enabled, the print spooler service?
4 are you facing this problem with a particular application?
5. you receive an error message when you try to print?You cannot change or remove the description of print spooler. The message you get in the description box is just tells you what the purpose of the service. To solve the problem on the printer does not print you can follow the steps and check if it helps.Follow the link and check if that helps.
Printer in Windows problems -
I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?
Thanks for your suggestions.
Jeff
Hello
-What is the operating system installed on your computer?
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads -
Installation of window 7. ! With a problem! Help, please!
I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong...
As you do not see the weight...
Please help me!
- 512 GB of ram with a Flash ram Drive his 10
- Windows aero does not support "as the scan did not say very important hahah: D.
- Intel Inside Pentium 4
- Reference Dell computer WITH a disk emachine hard and things 'VERY OLD '.
- 149 with Flash Drive 500 GB hard drive
Help, please!
PS. Mr. need help! D:
I can run vista Basic that lol
I didn't mean that you cannot run Windows 7. I have run on systems with 512 MB of ram. It will work, but will slip. It will be the same for Vista. I recommend that stick you with Xp until you are able to upgrade your ram.
-
Hey all,.
I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?
Hi tripleb316,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-
Original title: could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies
Hello I am looking for a way to solve:
Could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies.
This message appears whenever I try to open a graphics program HD writer AE 3.0
I'm running xpsp3 and all updates are underway according to Microsoft
Hello
1. were you able to use the program without any problem before?
2. don't you make changes on the computer before this problem?
Step 1: Repair of .net framework and check.
Reference: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
Step 2: Uninstall and reinstall this program.
-
Startup error: unable to load file or assemblyl
I get this error message when you try to open my software:
Startup error: could not load file or assembly 'System.configuration, Version = 2.0.0.0, culture = neutral, PublicKeyToke = b03f5f7f11d50a3a' or one of its dependencies. The system is unable to remove the specified file.
I tried to clean .net and re - install, but I still get this error.
Anyone know why?
Try a system restore before the problem started:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreIf it does restore before installing the updates, try to install the updates one at a time to see if there is a conflict and hide the update if necessary.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Original title: uninstalled paintnet3.5 now impossible to reinstall download
"downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs
Hi Bernie, 78,.I suggest that you follow these steps and check if it helps.Step 1:Right-click on the setup.exe file and run as administrator and check.Step 2:I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.Step 3:I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Windows is loading files... stuck not start disk
Hello, I have a Server 2008 OS and im trying to install it.
It is a clean server with literally nothing about it. Pervious OS was Redhat.
While trying to start the server will automatically try to boot to the CD after he tries to boot from everywhere else, but the problem is that it will not load the CD. Stuck everything when trying to load the CD "Windows is loading files.
The strange thing is I took another computer with the same exact hardware and the previous operating system as this computer and installed OS 2008 very well. This server is supposed to be just to be a "Back-up server.
If you guys can think of anything please let me know... Thank you!
Zero clean up the hard drive. I had the same problem after RedHat installed several years back.
Hard drive test - CD Bootable:
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFTNever be afraid to ask. This forum has some of the best people in the world to help.
-
U - SQL error: could not load file or assembly 'ScopeEngineManaged.dll '.
Hello
I downloaded 'Azure Data Lake Tools for Visual Studio' for Visual Studio 2013 and installed.
I created a sql - u script and try to run on the local computer. I am getting error below.
"1 E_CSC_SYSTEM_INTERNAL error: internal error! Could not load file or assembly 'ScopeEngineManaged.dll' or one of its dependencies. The specified module could not be found. 1 1 USQLApplication1 Samples\USQLApplication1\USQLApplication1\M12PostCodes.usql D:\Nagaraju\Hitachi\Datalake.
Please help me solve this problem.
Note: If this isn't the correct category, please route to the appropriate queue.
Concerning
NK
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Could not load file or assembly 'Interop.CxUtilSvcLib '.
Immediately after login, I receive the message:
Impossible to initialize the MainWindow could load file or assembly 'Interop.CxUtilSvcLib, Version = 2.3.0.0, Culture = neutral, PublicKeyToken = null' or any of its dependencies. The system cannot find the specified file.
All advice appreciated!
So far, I applied the registry cleaners but they report no error. Windows 7 system seems to work ok apart from this message that appears after each connection.
Thank you in anticipation
Hi Nathalie,.
Thanks for your advice.
Background is the laptop is a Dell 2 years initially, running under Windows 7, but over the few days put to level to Windows 10. Following several "parts" of the laptop upgrade and OS functions did not work. After solving these, I stayed with the button START, causing a critical error message, requiring a reboot. and following repair this breach critical a START button that did not work at all. Finally I solved this problem. However, the lady whose laptop it's had enough and I wanted to go back to Windows 7 which had functioned very well for two years. I returned the system to Windows 7 when this Interop.CxutilSvclib problem appeared. All this happened in the space of 5 days.
I followed your method 1 and safe mode took place without problems, but does not solve the problem. I then used your method 2, which has reported no problem, but still the message appeared. I then used a Dell utility on a disc that came with the camera and it eliminated the problem. I have no idea of what the digital utility did, but he cleared the problem.
Now, the Lady is happy that she is back in Windows 7.
Thanks for your suggestions down nonetheless because they limit the areas to study.
Kind regards
-
New-WebserviceProxy could not load file or Assembly
Hi, I'm calling a WebService from powershell, but I get the error ' could not load file or assembly "file:///C:Windows\TEMP\xbnahjh.dll '"
I am however able to call the weather sample webservice as shown in "http://blogs.technet.com/b/heyscriptingguy/archive/2009/11/17/hey-scripting-guy-november-17-2009.aspx", but not that which is placed on a different server. I have no knowledge about the services of Powershell or webservice. Any suggestions on where I should look would be useful.
I'm running the powershell in administrator mode and also used the unrestricted set-execution policy.
Hello Silvia,.
Thanks for posting your concern on the forum.
According to the description of the problem you want to call a webservice from powershell and get the error could not load file or assembly 'file:///C:Windows\TEMP\xbnahjh.dll '.
As the problem is related to a dll file, this means that some dll files are missing or damaged. In order to repair, I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.
Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
- Go to Start, click all programs and open the Accessories.
- Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
- In the command prompt, type the following command and press ENTER:
sfc/scannow
For more information, refer to this link:
http://support.Microsoft.com/kb/929833/en-us
You can see the article mentioned below to call a WebService from powershell.
Calling a web service from script Powershell
Hope that the information provided is useful. Keep us updated on the issue and we will be happy to help you further.
Kind regards
Maybe you are looking for
-
31.1.0 and 31.1.2 drop down menu commands and commands "right button" very slow... what to do?
My TB version 31.1.0 and 31.1.2 drop-down menu commands and commands "right button" very slow... All other menu programs bars will work perfectly. Tried disabling McAfee, no diff. TB collects e-mails, wrote e-mails to a normal speed without problem.
-
I am trying and I don't know how make for the fixed, the speaker on my screen have Red Cross on it and I didn't get out that cross please can you tell me how to do, I check and check my cable to my new speakers and everything is good so I don't what
-
After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?
Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.
-
Retrieve a number contact name
Hello. Given a phone number, I want to search the telephone directory and retrieve contact corresponding to the number in order to get the names of the contacts. I found many examples of how to get a contact based on their names, but I don't know whe
-
Right click on the desktop is no longer present "new folder" in the selection options
New folder option missing also in all the other normally seen areas.Now have zillions of other new options, none of which I need. How to restore the option or fix to get the new folder tray option?E-mail address is removed from the privacy *.