He saids load files from memory to print later in my print spooler how to get out or remove it

Similar Questions

• cartridges won't come out, says paper jam, how to get out of cartridges without killing printer.?

  cartridges aren't coming out,

  says paper jam, no paper in the printer,

  How to get out the cartridges without killing printer.?

  I did the thing video together 3 times and still won't come out? I'll call hp remote and hope they can fix it thank you

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I just installed Adobe Acrobat Reader DC. can not use it to open the loaded file from HMRC coffee-based tools. Reads the message "Cannot open coffee tools rti because it is not a type of supported files"

  Help, please. I just down loaded Adobe AcrobatReader DC on my laptop new HP Envy with Windows 8.1. Now it will not open a newly low loaded file from HMRC base pay tools 2015-2016, this message appears - "could not open coffee tools rti becauseit isnot n supported file type.

  Yes, I thought. This file is not not to open it with Acrobat Reader. Open it in Windows Explorer. It will be like a folder (without the ZIP on the end).

• How can I get my printer spooler running I get error 1075 when I try to start it

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you see something like this:

  Cannot start service on Local computer print spooler.
  Error 1075: The dependency service does not exist or has been marked for deletion.

  Error 1075 means "ERROR_SERVICE_DEPENDENCY_DELETED".

  This means that there is some Service think that it depends on to start the Print Spooler Service that is missing.  It's maybe the printing or drivers that have been uninstalled software.

  If really, the dependency service exists and simply not work (dependence, Services must be started and running), you will get an error like this:

  Cannot start service on Local computer print spooler.
  Error 1068: The dependency service or group could start.

  You now or you already had all of the installed Lexmark printers?

  If the Service print spooler used to work well, do you have added or removed all printers since he worked?

  To view your Services, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Highlight the Print Spooler Service, right-click and choose properties you can see what is happening.  You will be especially interested in the startup (generally set to automatic) type and the items listed in the Dependencies tab.

  Always print spooler Service usually depends on the remote procedure call (RPC) Service is running, so if the remote procedure call (RPC) Service is not running, find it in your Services, launch it and set the startup type to automatic.

  If the remote procedure call (RPC) Service is not listed as a dependency for the Print Spooler Service, you can add it.

  You must see what Services depends on your Print Spooler Service, and then restart them (and their startup type automatic value), or if you have the dependency Services listed for items that are more installed on your system, you must inform the print spooler that she needs more of them to start.  Registered Addiction Services that are no longer needed must be removed.

  For example, I said to my Print Spooler Service depends on the remote procedure call (RPC) Service, and also depends on the Service Jose (and of course there is no Jose service).

  When I try to start my Print Spooler Service, I get an error 1075.  It's logical.

  If I look at the Print Spooler Service properties Dependencies tab in the applet Services however, it does not list the Jose Service as a dependency, but if I query the Print Spooler Service broken from a command prompt, I can see what ir really depends on to start and it looks like this:

  [SC] GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                               : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  Jose
  SERVICE_START_NAME: LocalSystem
         
  I need to delete the Service jose as a dependency for the Print Spooler Service (and leave just the rpcss Service), then the Print Spooler Service will start.

  If you don't see the problem in the Print Spooler service dependencies tab, see what are actually of a command prompt window Print Spooler Service dependencies.  To do this, click on start run and in the type box:

  cmd

  Click OK to open a command prompt window.

  In the command prompt window, query the spooler to print (spooler) Service by entering the following command:

  sc qc spooler

  Whatever it is listed under needs of DEPENDENCIES is running before starting the print spooler.

  If there are DEPENDENCIES listed for things that are more installed, you can fix it, but first of all, we need to know what is indicated, then we can remove the ones that are not needed.

  If you make adjustments, do not forget to restart your system and make sure that changes "stick".

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• volume mixer icon is missing from my taskbar, can someone direct me as to how to get it back?

  original title: ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. __

  Hello, the volume mixer icon is missing from my taskbar, can someone direct me as to how to get it back?

  Hello

  Click with the right button on the taskbar, click Properties. Go to the notification tab and check again the line for the volume here icon.

  If it is not available, you may need to reinstall the drivers from your sound card or see the following page for an easy solution:http://www.winhelponline.com/blog/notification-area-icons-missing-in-vista/

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to get out with renaming a file every time that I change it?

  How to get out with renaming a file every time that I change it?

  Since the last update, I have more the possibility to combine files. How can I recover this feature

  10 pro version

  For the first issue: disable the preview pane in Windows Explorer.

  Wednesday, July 15, 2015 to 18:46, keithf52379832 [email protected]>

• BlackBerry Smartphones to transfer files from memory card to device memory

  Hi... the subject seems pretty basic.

  But when I plug my 8330 to a computer, I can access only files in the directory "Blackberry", which are files on the SD card.  I want to be able to access files / photos stored on the memory of the device.  I thought that to transfer the files from the device to the SD memory memory then would allow me to download on my computer

  Someone knows how to do this?

  Thanks in advance.

  Go to the media, press menu and Explorer, go to the memory of the device to locate the file, select the file menu, and then tap new and move

• How to load files from several periods of time in FDMEE?

  Hello

  Is there a way to FDMEE to load the file from several periods given in FDMEE with the period amounts in separate columns? (example below). At present, I can load several files at the same time condition each period in a separate file, but could not find a way to load the file below.

  Entity	Account	Amount-Jan	Amount-Feb	Amount-Mar	Amount-Apr
  100	3921	110	140	145	180

  Thank you and best regards,

  Sandeep.

  You don't need the entire script for files from several periods.

  Could have read the files having a column for several periods.

  In your case, you have multiple columns for different periods and this can be achieved using the standard period multi Format importing and loading data rules.

  Everything is detailed in the Administrator's guide. You can also take a look at fishing with FDMEE: FDMEE PSU2 published (11.1.2.3.200)

  Concerning

• Load files from a remote (on a server) folder as a stack

  Hello everyone, I'm back with another problem :-)

  I created * this script to check the consistency of a bunch of files in a folder.

  * When I say "created" I mean that I wrote a few lines by myself and then copied and pasted bits from several sources. In fact, I don't know where this code came from since part of it was my predecessor, my apologies for not related credits when necessary, if necessary (I definitely think so).

  In the end, I could understand how to assemble something which, given a file open in Photoshop, do this kind of thing:

  -Load all others .jpg or .jpeg files currently in the folder parent of the open;

  -their name after their document name, stripping the extension;

  -create a 4 color samplers and position them always in the same place, based on the height and width;

  -evaluates the reading R, G and B against a reference (to assess the overall brightness and WB);

  -evaluate the L value (lab) samples against the other horizontal sample (to assess the luminous homogeneity).

  -Rename each layer with a suffix ": OK 'or': N";

  -report all this in a log .txt on the desktop file.

  Now for some reason any this all works very well IF the folder with the images on my hard drive (computer desktop in my case), but if I try with a folder on a server, that it freezes, as in an infinite loop.

  My best guess is that this is due to the function "placeFile", which was recorded with Scripting listener and is the only bit I do not understand clearly. I had to wrap it in a try-catch clause to make it work.

  Could someone help me on this?

  I can attach the script because it does contain sensitive company information so that I work:

  #target photoshop
  if (app.documents.length) { // if length is 0 -> false, true otherwise
  var conf = confirm ("This script will delete any actual Color Sampler and create its own,\nAt the end you'll find a .txt log on your desktop and your layers renamed accordingly./nDo you want to continue?");
  if (conf===true) {
  //////////////////////////////////////////////////
  var strtRulerUnits = app.preferences.rulerUnits;
  var strtTypeUnits = app.preferences.typeUnits;
  app.preferences.rulerUnits = Units.PIXELS;
  app.preferences.typeUnits = TypeUnits.PIXELS;
  //////////////////////////////////////////////////
  var docRef = app.activeDocument;
  var H = docRef.height
  var W = docRef.width
  var H25 = Math.round (H*0.25);
  var H65 = Math.round(H*0.65);
  var W12 = Math.round(W*0.12);
  var W88 = Math.round(W*0.88);
  //////////////////////////////////////////////////
  //////////////////////////////////////////////////
  //// LOAD ALL JPG or JPEG FILES IN FOLDER ////
  //////////////////////////////////////////////////
  //////////////////////////////////////////////////
  var docRef = activeDocument;
  var sourceFolder = Folder (docRef.path);
  try{
     // declare local variables
                  var fileArray = new Array();
                  var extRE = /\.(?:jpg|jpeg)$/i;
  
  
                  // get all files in source folder
                  var docs = sourceFolder.getFiles();
                  var len = docs.length;
                  for (var i = 0; i < len; i++) {
                                  var doc = docs[i];
  
  
                                  // only match files (not folders)
                                  if (doc instanceof File) {
                                                  // store all recognized files into an array
                                                  var docName = doc.name;
                                                  if (docName.match(extRE)) {
                                                                  fileArray.push(doc);
                                                  }
                                              }
                                          }
                              }                            
                        catch(e) {}
  var docname = (String(docRef.name));
  var delimeter = '.';
  var splitted = docname.split(delimeter);         
  docRef.activeLayer.name = (splitted[0]);
  var mainlayer = docRef.activeLayer;
  var numberfile = 1;
  while (numberfile <= fileArray.length){
  ///////////call 'placeFile' function///////////                    
                      placeFile (fileArray[numberfile] );
                                      var layer = docRef.activeLayer;
                                      var numberfile = (numberfile+1);
          }
  app.activeDocument.rasterizeAllLayers()
  /////////////Move the Ref file to the bottom /////////////////////////////////////
  var lyrs = docRef.artLayers;
  for (var l=0; l< lyrs.length ; i++){
      if (lyrs[l].name === "WW REF"){
              lyrs[l].move (docRef, ElementPlacement.PLACEATEND);
  break;   
          }
      }
  ///////////////////////////////////////////////////////////////////////
  //////FUNCTION TO PLACE FILES FROM PARENT FOLDER AS LAYERS////////
  ///////////////////////////////////////////////////////////////////////
  function placeFile(file) {
  //Doesn't work without the try-catch 
   try {
  /*     function charIDToTypeID(s) { return app.charIDToTypeID(s); };
    function sTID(s) { return app.stringIDToTypeID(s); };
      var desc124 = new ActionDescriptor();
      desc124.putPath( charIDToTypeID('null'), new File(file) );
      desc124.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
          var desc125 = new ActionDescriptor();
          desc125.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Pxl'), 0.000000 );
          desc125.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Pxl'), 0.000000 );
      desc124.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), desc125 );
      desc124.putBoolean( charIDToTypeID('AntA'), true );
      executeAction( charIDToTypeID('Plc '), desc124, DialogModes.NO );*/
      ///NEW RECORDING///
  var idPlc = charIDToTypeID( "Plc " );
      var desc146 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
      desc146.putPath( idnull, new File( file ) );
      var idFTcs = charIDToTypeID( "FTcs" );
      var idQCSt = charIDToTypeID( "QCSt" );
      var idQcsa = charIDToTypeID( "Qcsa" );
      desc146.putEnumerated( idFTcs, idQCSt, idQcsa );
      var idOfst = charIDToTypeID( "Ofst" );
          var desc147 = new ActionDescriptor();
          var idHrzn = charIDToTypeID( "Hrzn" );
          var idPxl = charIDToTypeID( "#Pxl" );
          desc147.putUnitDouble( idHrzn, idPxl, 0.000000 );
          var idVrtc = charIDToTypeID( "Vrtc" );
          var idPxl = charIDToTypeID( "#Pxl" );
          desc147.putUnitDouble( idVrtc, idPxl, 0.000000 );
      var idOfst = charIDToTypeID( "Ofst" );
      desc146.putObject( idOfst, idOfst, desc147 );
  executeAction( idPlc, desc146, DialogModes.NO );    
      }
  catch(e){};
  };
  //////////////////////////////////////////////////
  //////////////////////////////////////////////////
  //////////////////////////////////////////////////
  var lyrArray = docRef.layers
  var lyrNo = lyrArray.length;
  var lyrRef = docRef.activeLayer;
  var noLayers = activeDocument.artLayers.length;
  ////MAKE ALL LAYERS VISIBLE
    try {
        for(var a = 0; a<lyrNo; a++){   
      activeDocument.layers[a].visible=true;  
     };
   } catch(e) {}
  //////////////////////////////////////////////////
  //DODGY WAY TO SELECT TOPMOST LAYER//////////
  //////////////////////////////////////////////////
  var ghostLyr = docRef.artLayers.add()
  ghostLyr.move (docRef, ElementPlacement.PLACEATBEGINNING)
  docRef.activeLayer.remove()
  //////////////////////////////////////////////////
  var okno = 0;
  ///remove all the color samplers
  docRef.colorSamplers.removeAll()
  //////////////CREATE THE SAMPLES AND POSITION THEM
  var sampler1 = docRef.colorSamplers.add ([W12, H25]);
  var sampler2 = docRef.colorSamplers.add ([W88, H25]);
  var sampler3 = docRef.colorSamplers.add ([W12, H65]);
  var sampler4 = docRef.colorSamplers.add ([W88, H65]);
  var alertMessage = "=================================================================\n#1 = top left, #2 = top right, #3 = bottom left, #4= bottom right\n=================================================================\n\n\n";
  /////////////MAIN FUNCTION
  function createPositionReport(H25, H65, W12, W88) {
  var colorSamplersArray = app.activeDocument.colorSamplers;
  var colorSamplerLength = colorSamplersArray.length;
  if (lyrRef.isBackgroundLayer){
  var docname = (String(docRef.name));
  var delimeter = '.';
  var splitted = docname.split(delimeter);         
  lyrRef.name = (splitted[0]);}
  ///////////EVALUATE THE SAMPLES ONE BY ONE AND REPORT
  for (var i = 0; i < colorSamplerLength; i++) {
      var R = Math.round(colorSamplersArray[i].color.rgb.red);
      var G = Math.round(colorSamplersArray[i].color.rgb.green); 
      var B = Math.round(colorSamplersArray[i].color.rgb.blue);
      var alert1 = ("#" +(i+1)+" ");   
      var alert2 = (" "+"R="+R+" G="+ G+" B="+B+"\n");
              if (R>=240 && R<=248 && G>=240 && G<=248 && B>=242 && B<=250) {
                    alertMessage+= (alert1+"good:" +alert2);
                       okno++       
                  };
                 else {
                       alertMessage+= (alert1+"NOT good:" +alert2);
                        };
  };
  //////////////////CHECK THE UNIFORMITY AND REPORT
  var colorSamplersArray = app.activeDocument.colorSamplers;
  var L1 = Math.round(colorSamplersArray[0].color.lab.l);
  var L2 = Math.round(colorSamplersArray[1].color.lab.l);
  var L3 = Math.round(colorSamplersArray[2].color.lab.l);
  var L4 = Math.round(colorSamplersArray[3].color.lab.l);
          if (Math.abs(L1-L2)>3 || Math.abs(L3-L4)>3) {
                 alertMessage +=("\nThe light is NOT properly centered on the subject.\n"+"#1 L = "+L1+"     #2 L = "+L2+"\n"+"#3 L = "+L3+"     #4 L = "+L4+"\n\n");
        }
          else {okno++ 
                alertMessage +=("\nThe uniformity seems to be good!\n"+"#1 L = "+L1+"     #2 L = "+L2+"\n"+"#3 L = "+L3+"     #4 L = "+L4+"\n\n")
                 }
  var today = new Date();
  var dd = today.getDate();
  var mm = today.getMonth()+1; //January is 0!
  var yyyy = today.getFullYear();
  var preferancelog = new File("~/Desktop/Lighting_Test_Report_"+dd+"-"+mm+"-"+yyyy+".txt");
  preferancelog.open('w');
  preferancelog.writeln(alertMessage);
  };
  for (y=0; y<(lyrNo); y++) {
  okno = 0;    
  alertMessage += ("==========>   "+lyrArray[y].name+"   <=========="+"\n\n");
  createPositionReport(H25, H65, W12, W88);
      if (okno == 5){lyrArray[y].name += ": OK";
          alertMessage += ("==========>   "+lyrArray[y].name+"   <=========="+"\n\n\n\n");}
      else{lyrArray[y].name += ": NO";
          alertMessage += ("==========>   "+lyrArray[y].name+"   <=========="+"\n\n\n\n");}
  lyrArray[y].visible = false ;
  };
  };
  }
  else {
      alert ("You have no open documents")}
  

  If this seems inconsistent to you please keep in mind that I'm starting with JS and that's the real copy-paste-adaptation from different sources.

  I tried as well to look at Photoshop's default script to load files as layers, but I can't understand...

  Thank you very much for your help!

  Marco

  Hi Marco, try substitution line 64:

  for (var l=0; l< lyrs.length ; i++){
  

  with:

  for (var l=0; l< lyrs.length ; l++){
  

  ("l +" instead of "i ++", which causes the loop to never leave);

  Makes, on my test (three jpgs in a folder on server: 1.jpg, 2.jpg, 3.jpg) he always loop constantly creating named layers such as "1: No.: No.: No. ' but maybe it's because I saw in your code, looking for diapers named"REF WW"which I did not - he eventually work on your side with your actual output files , following your own naming convention.

  (UPDATE - no it's not constantly looping, I must have done something weird myself during debugging - it comes out a Lighting_Test_Report_29-5 - 2015.txt file and renames the layers as 1: NO, 2: No. 3: NO - so I would say that it works as expected)

  See you soon,.

  Davide Barranca

  ---

  www.davidebarranca.com

  www.cs-extensions.com

• How to load files from cod?

  Watch out for the upcoming noob question!

  OK, so I finished my first project, now, I went to the project-> build and got some files: cod, jad, jar and a few others.

  How can I transfer it to my phone (Strom 9500 or Curve 8300)? What file can I transfer? I am currently using BB JDE 4.5.0
  

  I tried the Desktop Manager, but it says: "this application is not compatible with your device?

  Thank you!

  According to what you do with your project, you will have to sign before it runs correctly on a phone.

  If it is signed, you can either live load by placing the files of cod and jad file on a server and then pointing the browser of your BlackBerry on the jad file.

  If you use the Desktop Manager, you must generate an ALX file for your project before you can load it.

  What version of the JDE do you use or you use the Eclipse plugin? If Eclipse, what version of the BlackBerry plugin? 1.0 or 1.1?

• Update not load files from InDesign CC 2015.2

  Since the update to InDesign CC 2015.2 v11.2.0.99 on my macbook, InDesign load files, or allow me to create new documents. When I double click on a document plays its animation, but nothing actually loads Startup icons in InDesign. When I go to create a new document, change my presets and press ok, nothing happens again.

  Anyone got any ideas as to why this would happen? I tried uninstalling InDesign (app removed the preferences) and reinstall, but it made no difference.

  Any help would be greatly appreciated.

  See replace your preferences

• I want to play an avi file from Limewire on windows media player and everytime I try I get the error message one or more codecs you need is maybe missing. What should I do?

  I'm having a problem with Windows Media Player 11. I download a file from Limewire 5.3.6 play in wmp, and it won't work at all. I get an error message saying; "Windows media could not read the file. One or more codecs may be missing. I tried to download the codecs and that did not work.

  I'm having a problem with Windows Media Player 11. I download a file from Limewire 5.3.6 play in wmp, and it won't work at all. I get an error message saying; "Windows media could not read the file. One or more codecs may be missing. I tried to download the codecs and that did not work.

  ===================================
  The following free utility can help you identify
  the codec you need.

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Good luck.
  John Inzer - MS - MVP - digital media experience

• Where is the peripheral origin obsolete event ID 370 print spooler? Obsolete device can be removed from the operating system?

  I get a recording of event ID 370, about once every four days, what about the EPSON Stylus COLOR 460 printer ESC/P 2. I recognize the device as an old device, which is no longer necessary, that I thought was completely uninstalled years ago and I am slightly surprised to see that the tracks still on the computer, or not, as it appears.

  It is that I don't know if this record event was caused by a device driver package or the registry keys and values? Is the event ID 370 caused by or for both (device driver package / registry values) being obsolete?

  I have the old appliance any longer, so it seems sensible to remove traces of the system and in turn eliminate the causes of event ID 370. However, to find all traces causing the registration of the event? What traces can be removed without problem?

  1 today, this device does not show as a device available in display devices and printers to devices and printers.

  2, I was unable to see a name similar unused volume in trying to remove the old device (when looking faded icons in the branches of the Device Manager with emphasis on -pilot no Plug and Play, other devices, portable devices, Port (COM & LPT), Printers).

  3 reveals regedit there are registry keys and values in the registry that reference naked always at "EPSON" searches for the word. Yes, I have reason to assume that these registry keys and values have caused event ID 370? Is it safe to delete the registry entries, or should the registry key entries to receive new values? (I don't want the deletion of these registry values to cause instability in the print spooler.)

  Event ID 370 Description:
  The print spooler could not regenerate printer driver information for driver Epson Stylus COLOR 460 ESC/P 2 for Windows x 64 environment. Win32 system 2114 error code (0 x 842). This can happen after an upgrade of the operating system or due to loss of data on the hard drive.

  Search for "EPSON" in regedit concludes:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2

  It seems that traces of information about devices are still present in the registry (invalid entries), which causes the event. Run a registry cleaner will solve this problem, but please visit the following link before continuing:

  http://Windows.Microsoft.com/en-in/Windows/are-registry-cleaners-necessary#1TC=Windows-7

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.