Location of Style of the region

Similar Questions

• How to specify the location of the region built in Page zero?

  Dear Apex community,
  
  Regions, built in Page zero can be used repeatedly in a subset of pages in the application. Ok. But the preparation of the pages > 0, the region built in Page zero is not visible/available. There are a few generic placement options on the zero Page, but it doesn't seem to be positioning options in the higher pages. So, what happens if the region P0 must appear in different places in different higher pages? Or what if it should be a subregion? I missing something here, or are the only options of positioning available exclusively from scratch of the Page?
  
  TNX,
  Kim

  You always specify a "Point of view", which will be relevant to the page used by the rendered page template.

  The sequence is also always honored, hence a region with seq 20 will be apear between regions page 10 & 20 (if in the same point on the screen)

  Under regions are not feasible (through the zero page / regular page), or by program tells the display point - but then I wonder why you would want or need to do such a thing. If so, line up your page templates so that they use post similar region / numbering.

  That's all for the 4.1, page zero becomes global pages in 4.2 and have some of their own behaviors.

  Kind regards
  Scott

  blog: [base url - oracle.com] base - oracle.com
  Twitter: [url twitter.com/swesley_perth]@swesley_perth

  -Please mark a utility items like useful or appropriate, ultimately it helps us all the

• How to UN-restrict the movement of the regions to take

  The use of Logic Pro 10.2.3, I want to spend an excerpt from a plug to another track (which is not in the same folder to take). This is the procedure I use:

  1. Make sure the quick slide is off
  2. Cuts in the region to isolate the part I want to spend
  3. Drag the region upwards or downwards to the other lane.

  This works, because the logic is binding the region so that I can spend only it other ways to take in the same take folder.

  Copy and paste also don't work. When I select the region and press Cmd + X, it will appear a notification saying "Command is not available because there is no selected event."

  Then, how should I be trying to accomplish this?

  It is possible, but not with copy - paste. It takes a little knowledge that is actually. Here it goes:

  • When you save a passage while cycling with the option 'Take the folder' selected, logic creates an audio file (record). You see that the regions themselves are just axe-upper regions of this simple Audio file. Watch the project tree, and you'll see what I mean.
  • Look at my screenshot with two folders take on two different tracks. Audio the project browser shows two audio files with the individual region
  • Suppose that you want to place the last region to take (that I wrote). If I click on it, I'll see what region located in the Audio project (marked on the right) tree

  

  • To move that take to another track and take the folder, you select this folder take (in my screenshot synth) and place the playhead in the mounting position where you want to have its starting position (see arrow).
  • Now right click on this area in the project Navigator to open the context Menu. The first command is "Add track" and it's what he does. He takes this region (do you) and adds it to the railway in the region highlight starting at the position of the read head

  

  • In the following screenshot, you can see the result, take it in the folder to the Piano track is now copied to the folder to the Synth track
  • "Caution 1: these are clones of the region", which means, in changing a (i.e. trim) will change the other too. TO avoid this, you can copy and paste the region in the first project Navigator before the command "add to the track.
  • "Attention 2: destination folder take must be long enough to"accommodate"new take" (adjust to the right) or elsewhere, the region will be places like a region independent and not end up in the folder to.

  

  This all sounds really complicated, but it's not. It's actually quite 'logic' and once you do it yourself and get the hang of it, it is actually quite simple and fast. Even if a procedure to copy - paste would be good to have.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• My locations are wrong in the signature events

  My locations are incorrect in my events posted on the IPS module. It still lists the internal addresses in the form rather than IN. I'm looking through of the configuration and the docs but only found the region setting of the internal/external AD - which are in any way correct.

  Where or how not SPI learn what is inside and what is outside? He will be exhibiting this behavior if I only have the security policy for the traffic sent to the IPS module activated for just the external interface?

  In the network IPS sensor, you define networks using variables of the event. All undefined came OUT. I guess according to the behavior that you see that the module is the same.

• positioning of the region and elements in apex 5.0

  Hello

  I have 1 Brabant in the elements of this region in 3 columns.

  For example

  Point 1 column 1, column of article 2, item 3, column 3

  Article 4 column 1...

  I want to place the region to the left on the screen and position various components

  For example

  Section 1, column 1, point 2, column 2 to column 1, point 3 Column3 twice larger than column 2

  Article 4 column 1 bigger than column1 + column 2, point 5, on the position of the point 3 so there are only 2 items on line 2 and line 3 maybe 4 items

  All the elements are in the 1 table. I don't want to display more than 1 record in this region.

  I think I have to set the position of each element and the region maually. How can I do this?

  I tried in the attributes of the region: style = "left: 320; bottom: 50; »

  and the same thing in the attributes of the element

  What I did wrong

  Kind regards

  Siegwin

  Hi Siegwin

  I assume that you are working on 5 Apex and universal theme.

  I think you have to play with column spans.

  I hope this will help you to Apex 5 theme universal problem with text boxes

  Concerning

  Mahmoud

• How to show or hide the region of the shuttle during the click on the radio buttons?

  Hello

  I'm new to JDeveloper. Here is my requirement.

  1. create 2 radio buttons: Yes and no and default displays "" selected radio button.

  2. create a region of shuttle with select query in VO.

  Query is:

  Select 'No group' for_user, for_pkg double null

  Union

  Select "Company" for_user, for_pkg "SEGMENT1" double

  Union

  Select 'Rental' for_user, for_pkg 'SEGMENT2"double

  Union

  Select 'Cost center' for_user, 'SEGMENT4' double for_pkg

  Union

  Select 'Project' for_user, 'SEGMENT5' double for_pkg

  Union

  Select "Intercompany" for_user, "SEGMENT8" for_pkg of the double

  order by nulls first for_pkg

  3. initially hide the region of the shuttle during the loading of the page.

  4. click on the radio button 'yes', display area of the shuttle with values at the head of list of query VO and empty list leak.

  5. new click on the 'no' radio button, he must hide region and so screen shuttle shuttle dynamically according to the selected option button.

  But my problem is I am able to hide area shuttle when the page loads at the beginning and after that, when I'm clicking 'Yes' radio button, is just to display area shuttle empty without value in the main list and once when I'm clicking 'No' radio button, it should hide area shuttle but he's not hiding. I used the RPP to show or hide the area Shuttle under certain conditions. I use JDev 10.1.3.3.0 version as we Oracle EBS version 12.1.2 in our society.

  Please find the attached draft and suggest me proper with examples of sample approach.

  Monika,

  I tried to get this working in the lower version of Jdeveloper and looks like it works.

  Can you make the change below and see what happens.

  1. modify your query to VO as below: (I replaced null with SEGMENT0)

  select 'No Grouping' for_user, 'SEGMENT0' for_pkg from dual
  union
  select 'Company' for_user, 'SEGMENT1' for_pkg from dual
  union
  select 'Location' for_user, 'SEGMENT2' for_pkg from dual
  union
  select 'Cost Center' for_user, 'SEGMENT4' for_pkg from dual
  union
  select 'Project' for_user, 'SEGMENT5' for_pkg from dual
  union
  select 'Intercompany' for_user,'SEGMENT8' for_pkg from dual
  order by for_pkg
  

  2. place VO execution to the processFormRequest:

      public void processFormRequest(OAPageContext pageContext,
                                     OAWebBean webBean) {
          System.out.println("In process Form Request");
          super.processFormRequest(pageContext, webBean);
          OAApplicationModuleImpl appModule =
              (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
          String eventParam = pageContext.getParameter(EVENT_PARAM);
          System.out.println("eventParam: " + eventParam);
          if ("showHideShuttle".equals(eventParam)) {
              //  appModule.invokeMethod("deletetrailing");
              System.out.println("Inside If");
              OAMessageCheckBoxBean messageCheckBoxBean = (OAMessageCheckBoxBean)webBean.findChildRecursive("checkBoxBean");
              System.out.println("messageCheckBoxBean : " + messageCheckBoxBean);
              String messageCheckBoxBeanVal = (String)messageCheckBoxBean.getValue(pageContext);
              System.out.println("messageCheckBoxBeanVal: " + messageCheckBoxBeanVal);
  
              if ("Y".equals(messageCheckBoxBeanVal)) {
                  OAViewObjectImpl shuttleVO1 =
                      (OAViewObjectImpl)appModule.findViewObject("ShuttleVO1");
                  if (shuttleVO1 != null) {
                      shuttleVO1.setWhereClause(null);
                      shuttleVO1.setWhereClauseParams(null);
                      shuttleVO1.executeQuery();
                      System.out.println("Executed Query : " + shuttleVO1.getQuery());
                  }
                  OAViewObjectImpl shuttleVO2 =
                      (OAViewObjectImpl)appModule.findViewObject("ShuttleVO2");
                  if (shuttleVO2 != null) {
                      shuttleVO2.setWhereClause("1=2");
                      shuttleVO2.setWhereClauseParams(null);
                      shuttleVO2.executeQuery();
                      System.out.println("Executed Query1 : " + shuttleVO2.getQuery());
                  }
              }
              String[] name = { "RenderAttr1" };
              String[] val = { messageCheckBoxBeanVal };
  
              Serializable[] params = { name, val };
              Class[] paramTypes = { String[].class, String[].class };
              appModule.invokeMethod("setXXCustomPVOValues", params, paramTypes);
  
          }
  
      }
  

  3. move Spel link shuttle Bean for the region of header above.

  Some useful links for the shuttle Bean:

  Technology blog based in Java of Sushant: 13. Area of application OFA shuttle

  Framework OA Blog: control of the shuttle as part of OSTEOARTHRITIS

  See you soon

  AJ

• How to increase the size of the message text style in the OPS

  Hi all

  I moved the region of the table, I use a text element of style message, I need to increase the size of the element.

  I tried with the definition of properties such as the maximum length and width, but does not.

  Kindly do the needfull help.

  Kind regards

  Sangu

  Hello

  Try by setting the width of the column of table % like 50% advance property to increase the size of this column that I think possibly increase the size of the bean style.

  BR, FLS

• Style of message region

  Hi all

  I use Apex 4.2.4 and theme 23.

  I would like to change the region of message for a message of success and of the notification. It seems that both use the MessageRegion class (see below the code in firebug). When I change the style of this class, it's showing same style for success and notification messages.

  "<section id="uNotificationMessage"' class="uRegion uWhiteRegion uMessageRegion clearfix"> "

  
  

  "<section id="uSuccessMessage"' class="uRegion uWhiteRegion uMessageRegion clearfix"> "

  How can I achieve two different categories for the success and the notification message? I know how to write my own css, it smashes into the page template.

  But how can I change for the different sections, because they use the same classes?

  Thanks Diana

  Hi dianap,.

  The answer lies in the markup you've posted.

  You can target areas of success and Message of Notification Message using their attribute id.

  For example:

  #uNotificationMessage {
    /* CSS rules for Notification Message */
  }
  
  #uSuccessMessage {
    /* CSS rules for Success Message */
  }
  

  -> Of this regulation, you can write in the Page CSS Inline attributes, or you could make a CSS file and include it in your default Page Template.

  I hope this helps!

  Kind regards

  Kiran

• Horizontal scroll bar is missing in the region without borders

  Hello

  I use v4.2.1.00.08 APEX and used 24 theme.

  I'm not able to see the horizontal in the region without borders scroll bar when necessary. I just used the code inside the < style > tag to display the scroll bar, below

  #RPT .uRegionContent
  {
  overflow:auto;
  }
  
  

  It works, but now I can see the only horizontal scroll bar for this region not in the browser. Can someone help me get the horizontal scroll bar in the browser.

  

  I created a test case for this species,

  https://Apex.Oracle.com/pls/Apex/f?p=32974:3:8262817666057:no

  WS/Nations United/PWD: adhimaha/adhimaha/adhimaha

  Can someone help me on this...

  Thanks in advance,

  Adhi

  Lakshmi,

  Check in your page 9 of the application or the tab Test Pars control.

  hope this has solved your problem.

  changes made

  1. create the new model of the region as a region without borders copy model

  2. change the region class 'uIRRegion' instead of 'uRegion '.

  3. apply this classic report template.

  Leave.

• Cache initializer / reproduced preload of the region

  Hello

  In my application, I have a replicated region defined to contain the configuration settings of overall application that will be shared between all nodes in the data grid. I preload a set of default configs in this region using a class initializer of cache. This initializer will be defined in each node, since we intend to have the same node throughout the grid architectures. I plan to avoid having multiple nodes pre-fill the default configs using a DistributedLock on the region during the initialization routine and make a putIfAbsent() for each configuration value in the region.

  My question is when I want to start a new node in an existing network: at the start of this new node will try to call the initializer. Will be the existing configs in the grid that runs already replicated to this new Looper before execution of the initializer or after? If, after the will then configs located in the new node get replicated to the rest of the grid or the existing configs in the grid get replicated on the new node of will?

  Thank you!

  TMO

  TMO,

  The initializer will be called after the replication has occurred. In other words, your configs will have been replicated to the new node before the initializer is called.

  Barry

• Dynamic action to refresh the region-&gt; see the message to user

  Hello

  I have a page in the apex 4.2.2.

  In this page, I have an interactive report and a filter sets, users can choose.

  When users choose one of the filters, I implemented a dynamic action to refresh the interactive report region, so it should refresh the data being shown without submitting it.

  So far so good... but... when the region is refreshing there is point 'charge of circle' which displays and allows the user to know he is done on the page. But this icon is not so obvious.

  What I want is to add a message, for example to display a region, which showed a message like "being the updating of the report, please wait" (something like that).

  I tried to insert in my dynamic action, as 1st action, to SHOW this area and as the last action to HIDE. But nothing is done, the region is never shown.

  How can I perform this task? All I need is to be able to display a message, for the duration of the dynamic action, to inform the user that he or she must wait until the task is completed.

  All real common actions have been reported to "wait for result", if I didn't get this wrong, it means that he expects the previous real action remaining to be done, in order to trigger the next... This should show the region and then hide it, but it does not work.

  Can someone help me with this? Maybe give an idea?

  Kind regards.

  You can actually go several routes with a solution for this. A refresh of the IR will start forward and after updating the events that you can hang on to dynamic actions or jQuery, so you can show something at the start of the update and then hide it again. And since you can do all this in jQuery you could easily hold it in a javascript file and attach it to every page of the ir. This is probably the cleanest solution and more independable.

  Another way is to use the already existing waiting icon and play with his presentation a little. You know, that you are talking about loading icon. You can change this to something much better with minimal effort!

  Example:

  Run when the page loads, to execute javascript code:

  $("#apexir_LOADER").append("
  Please wait. Refreshing the data.
  ");
  

  Add this css to inline css in the page:

  span#apexir_LOADER {
  display: block;
  width: 150px;
  text-align: center;
  background-color: white;
  border-style: solid;
  border-radius: 5px;
  border-width: 2px;
  top: 20%;
  }
  

  It'll make a little white box with black borders rounded around the loading icon and put a text below.

  You can get the html code to add a bit more generic, or you can raise some html of the page if necessary. You can put it in a dynamic action on the load, put in a js file, or whatever. The css can be put in a page template or a css file.

  It's only less independable hanging in front or after updating because we are taking advantage of the system in place, which means that maybe he could change in the future - but this is hardly on the same scale as the 'hacking' the ir for example javascript.

• Resize the size of the region when the window is resized

  Hello

  I have a tree, surrounded by < div >, region whose height is set to the loading of the page by a dynamic action so that it is smaller than 200px window.innerHeight. I set overflow: auto in the style for fully free can still be accessed.

  Now I want a dynamic action that fires when the window is resized, which automatically adjusts the size of the region, accordingly, so that the region is always smaller than the HauteurInterne from the window of 200px.

  I can get the dynamic action to fire by setting the resize event, however, it does not change the size of the region.

  Any ideas?

  Jez

  Panic at the wire, he sorted.

  Dynamic resizing action reads as follows:

  $("#tree").css("height",window.innerHeight-200);

  where tree is my div id

• How to resize the width of the region

  Hi all
  
  I use apex 4.2.2 database oracle 11g R2, IE 9.
  
  I created a region on the HOME tab to the navigation menu.
  but its width is covering the width of the entire page.
  How could resize the width of the navigation region?
  
  Thank you very much.

  Hi Maahjoor,

  Change the region and

  In the Region attributes set style = ' width: 300px; " instead of 300, you can put all desired widths.

  hope this helps you.

  Kind regards
  Jitendra

• Dynamic action on the region

  Hello
  
  Request Express 4.1.0.00.32
  
  I have a report region on a page that is conditionaly displayed depending on the value of an element of page Pn_ITEM = "HIDE".
  
  I have dynamic stock running on the page that fill a collection and update the report without the need to submit the page. However, I need to show the report somehow when the collection contains at least one of the members present.
  
  I tried the following:
  
  1st real action running pl/sql that adds a record / member of a collection, then a 2nd action sets the value to a page Pn_ITEM = true 'SHOW' action item and a 3rd that should show the region based on the value of the real action 2.
  
  My collection has an added member. The value 'SHOW' is applied to my article on Pn_ITEM page by the dynamic action but the region of report I want now displayed is not displayed. Obviously if the page is submitted, the report will now be shown however I can't send the page at this stage that's why I need to do this dynamicaly or through javascript and on the application process.
  
  Any ideas how to get my region report to display once the collection has at least one member without submitting the page?
  
  Thanks in advance.

  Remove the requirement for the view from the region. You don't want this here since it completely stops rendering region if the condition is not fullfilled to the render time. You want that he made, but not displayed.

  Add css to the region (inline, class):

  style="display: none;"
  

  Add real action that will do a refresh on your area (component - refresh, select your report as an affected item region).

  Now, either:
  Add a real action of type run javascript. Since you can not put conditions on the real actions, we will test the condition in javascript.
  Choose one:

  if($v("Pn_ITEM")=='SHOW'){
  //if you want to target the region to be shown by an ID (static id?)
  $("#region_id").show();
  };
  

  if($v("Pn_ITEM")=='SHOW'){
  //if the triggering element would be the region to be shown
  $(this.triggeringElement).show();
  };
  

  if($v("Pn_ITEM")=='SHOW'){
  //if you'd want multiple affected elements to be shown at once drop the [0]
  $(this.affectedElements[0]).show();
  };
  

  Create a new dynamic action that has the same conditions of release as your other dynamic action.
  Specify a when condition:

  $v("Pn_ITEM")=='SHOW'
  

  Create a real "Show" type action to show the region.

  Final result should be your dynamic action creating an item in the collection, an update of the report based on the item (but still not represented) and finally a show in the region.

  Remember that stocks will also fire on page load (so don't forget to check the box on the actions of true), otherwise the region does not appear initially.
  I would say that the item is probably not necessary, but depends on any other logic, you might have on your page and possibly interacts with it.

• Hide/show the region

  Hello
  I'm trying to change the default behavior to hide/show the region to show, after a few attempts, I got partially work but now does not work by clicking on the icon to enable/disable/hide also changed the icons and added a type = "" but his does not work. " Any help? Thanks and greetings

  You can do so at the level of the model. Copy the skin and see the area to Hide and Show (show) and then modify the model. Essentially 2 thing I've changed are the image of collapse_minus.gif and style ="". My suggestion is to make a copy of the region before making any changes. It works for me in IE, Chrome and FF.

  
  
  
  
  
  
  

  #TITLE #.
  #CLOSE # PREVIOUS # ##DELETE NEXT ##EDIT ##CHANGE # CREATE # CREATE2 # EXPAND ##COPY # HELP #.
  #BODY #.