locking and unlocking through the command, 'cacls' locked but not unlock

Similar Questions

• MAC: can connect through the Skype Web site, but not through the Skype APP itself?

  I guess that the SAME password should work for the TWO the Skype Web site and the Skype APP. However, if the website sign - it works very well, the Skype APP has a msg: "Skype cannot connect." I'm using Version 6.3.0.602 on an iMac running the latest software of Yosemite. Solutions? What I am doing wrong? (P.S. I hear, there is a version 7 for Mac, but when I go to the site to download the "most recent" version, I get the above mentioned 6.3xxx.

  OK, I 'solved' myself. I downloaded a "dmg" on the site yesterday (7.2 v), but when I started to drag the 7.2 app in my apps folder, he "warned" in ERROR that I was running a later version on the computer. So, I did not install 7.2 yesterday.

  Today, I checked the version on the computer 6.3xxx vs the downloaded 7.2, and of course the 7.2 has been later. Ignore the message warning and dragged to the app folder and it logs how.

• HP Pavilion Elite HPE - 580t: SATA HDD recognized and boots with the 2nd HARD drive, but not without

  Hello

  I have a Pavilion HPE - 580t with windows 7 installed.  The original drive (Drive1) has (according to Windows Disk Manager), a 100 MB system partition, a partition of 1 GB operating system and recovery partition.  The drive began to generate disk errors.  I added a second SATA (lecteur2), which has been recognized in the BIOS - it always appears at startup.

  I do not have to implement a system of lecteur2, but re-installed Windows 7 100 MB partition using lecteur2 as boot drive (not a cover), and it works fine, for most.  Reader1 still generates errors and slows down the office, but if I disconnect reader1, lecteur2 is ignored at the start, as the Bureau attempts a network boot.  I have confirmed in Windows OS is the start of the lecteur2, not reader1, but once again, lecteur2 is ignored as boot device if reader1 is not present.  I should add that this was the case when I was reinstalling the OS, I tried unplugging reader1 prior to re - install, but could not do and still access lecteur2.

  I tried to go up during the boot sequence in the Setup (F10), no change.  One additional thing - Setup (F10) is available that when reader1 is connected - F10 key has no effect at startup if reader1 is detached.  F10 Setup runs from the system on Disk1 area?  Any ideas on what I need to do to drop Drive1?

  Thank you

  David

  I can now tell you 2 things on your system.

  (1) the original hard drive is 1.5 TB and that is embedded in the tattoo of HP.

  (2) you cannot use a disk less than 1.5 TB as primary drive.

  Never seen a facility like this scheme start between readers.  The only way I see on this perdictament is to remove the 1 TB drive and let the process of recovery of re - install the operating system. Then immediately clone the original on a new disk of 1.5 or 2 t. Attention to not exceed 2 TB. Seagate and WD has a free program for Disk Wizard for cloning option.

• How to run a file through the command prompt window

  I try to download a zip called Kindle Gen - file instructions say I should first extract it to c:\KindleGen and then run it through the command prompt window by typing c:\KindleGen\kindlegen (I ' v it not compressed)

  The showsc:\Users\Barry prompt window > then I'v typed into it after the > but its not to recognize the path to the file.

  Wonder if anyone can advise this as i ' v hurts?

  Thanks Barry

  I try to download a zip called Kindle Gen - file instructions say I should first extract it to c:\KindleGen and then run it through the command prompt window by typing c:\KindleGen\kindlegen (I ' v it not compressed)

  The showsc:\Users\Barry prompt window > then I'v typed into it after the > but its not to recognize the path to the file.

  Wonder if anyone can advise this as i ' v hurts?

  Thanks Barry

  If you have used Windows Explorer (computer) to create the directory in question (C:\KindleGen\) and extract the files in this directory...

  Open a command prompt.

  Type:

  CD \KindleGen

  Type:

  DIR

  Run everything you are supposed to run by typing the name.

• Mapping network drives through the command prompt to another user

  Right now I am implementing a batch file that will map the readers of network for other user accounts. Currently, I can only card readers for the connected account and no one else. Is there a way to do it through the command prompt, or I have to use powershell. Really, I'd rather it be done through the command prompt as I already all the completed script, with the exception of this part.

  Thank you

  EDIT: After further review, I conclude that there is no possible way to do it. Simply, it is not included in all orders that I could find. If someone finds, then great, but if not, like I did is as follows:

  Check the user credentials against a master list which also has passwords.

  Once a match, use this user name and corresponding password.

  Run this to authenticate by using the Group Policy Editor.

  You can map drives with group policy or by using a startup script (= batch file) that contains one or more of the following commands:

  NET use / persistent: no
  NET use q: \\ServerName\ShareName / User: David SomePassword

  NET use q: \\ServerName\ShareName / User: David *.

  Note that the incorporation of the passwords in a batch file is a serious safety hazard that is why the second command is preferable.

• How to install Adobe Acrobat Reader DC version 15.010.20060 silently through the command line?

  Hi, I downloaded Adobe Acrobat Reader DC version 15.010.20060 exe. I want to install silently from the command line. I run the following command /sAll /msi EULA_ACCEPT = YES/SB install.exe. I can get it to install, but not entirely in silence. Progress bar shows and after finishing he invites an OK button and opens up a new site at the end is there a way to get it to install in completely silent mode through the command line?

  Hello

  Please try the below perimeters, he works for AcroRdrDC1501720050_en_US.exe. I installed completely silent.

  /qn EULA_ACCEPT = YES AgreeToLicense = Yes RebootYesNo = no /sAll

• inserting data 1 million through the command copy

  Hello
  
  I tried to insert data 1 million per copy command sqlplus, but because of tablespace size problem
  
  "ORA-30036: unable to extend segment by 1024 in undo tablespace"UNDOTBS1"" error is coming.
  
  I cann 't take the help of s/n cos my enviornment cann' t b has changed.
  
  So is it possible to insert 1 million through the command data copy both
  
  Thanks in advance

  BP says:
  Hello

  I tried to insert data 1 million per copy command sqlplus, but because of tablespace size problem

  "ORA-30036: unable to extend segment by 1024 in undo tablespace"UNDOTBS1"" error is coming.

  I cann 't take the help of s/n cos my enviornment cann' t b has changed.

  So is it possible to insert 1 million through the command data copy both

  Apart from the other advice you have already, you might be thinking how to use a direct-path insert access instead of the COPY"" command.

  If you use "INSERT / * + APPEND * / IN...» You will not use all CANCEL as long as you're not violating any restrictions direct-path insert SELECT FROM... ». Most commonly encountered are active triggers and foreign keys or primary/unique constraints can be delayed.

  A fairly comprehensive list of restrictions is located in the documentation:

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28313/usingpe.htm#CACEJACE

  Outside do not use CANCEL the access direct-path insert is usually a bit faster that the conventional insert, then you want to give it a try.

  Note, however, that you are unable to access the object that you inserted by using direct-path insert of access in the same transaction, this triggers error "ORA-12838: cannot read/modify an object after edit it in parallel." So if you need to access the same object once again without committing the transaction, does not allow direct-path inserts.

  In addition the access direct-path insert will not re - using the available space in the already allocated blocks, so if you insert frequently subsequently delete a significant number of lines your table will increase with each path direct insert operation and leave unused space behind, affecting the performance of full table scans since it will have to go through all the blocks, although they could be empty (or almost).

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  You can not unlock with the AppStore. Request a refund or ask the previous owner to retrieve his password:

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• MAC address: Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Yes.

  Yes.

  Of course - you use 'other/unknown', then...?

  (Google for "MAC spoofing").

• How can I change text size and point via the command prompt?

  I want to create a script that will allow me to easily change to or from my TV to my monitor. I know how to change the display, but I don't know how I can change the size of text and point via the command prompt (that is, from 100% to 150%). Does anyone know how?

  Unfortunately, you can not.  In addition, change the DPI requires reboot (or logout and back).  But you can apply a different theme, that you can call from the command just by opening the .themepack file.  Since themes can control the size of some elements of the police who might do the trick you are looking for.

• I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g meory and with 3.6 ghz cpu

  I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?

  How much memory you allocate to Photoshop in the preferences?

  Terri

• I bought Photoshop CS2 in 2005. I recently changed my PC and load the software on the new PC.  I load the CD and proceed through the steps.  When it's time to serial number software tells me the serial number on the CD case is not valid

  I bought Photoshop CS2 in 2005. I recently changed my PC and load the software on the new PC.  I load the CD and proceed through the steps.  When it's time to serial number software tells me the serial number on the CD case is invalid.  It is the same serial number, I used previously.  How do I remedy this situation so that I can use the software on my new pc?

  First, use the serial number to the right of the download for Windows.

  

  Do not place information in the field of the Organization after you enter the number. Which causes problems.

  If you have windows 8, you may need to change the directory to progra ~ 2 on some 64-bit windows systems:

  The reason for the use of progra ~ 2 on a 64-bit system when installing a 32-bit application is the 8 character limit imposed by Windows. PROGRA ~ 2 totals up to 8 characters, program ~ 2 is 9

  You have 2 options:

  1. in the installation, change your path to C:\progra~2\... and install it. It should work.

  2 copy Setup on your local drive. The right click on Setup.exe, properties > Compatibility tab > run in compatibility mode. The choice of XP SP2. Click OK. Run Setup.exe

  Either we have to work.

• Trying to cancel my subscription but can continue to will return to bike and returns through the cancellation process - tells me I need to call customer service but no phone number is available.

  Trying to cancel my subscription but can continue to will return to bike and returns through the cancellation process - tells me I need to call customer service but no phone number is available.

  Hello Marilyn,.

  Please sign in to your Adobe account and then go to the link below:

  Contact the customer service

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• Trying to enter gpedit.msc in the command run. Does not. Try to disable auto-start for usb devices.

  Hello. I read that I can go in gpedit.msc through the command run. I can't get in. He tells me this message: "Windows cannot find 'gpedit.msc'. Make sure you typed the name correctly, etc... »

  It is the process that a memory patriot employee was told in email: Ok then please try this.

  1. click on start, run, type Gpedit.msc in the Open box, and then click OK.

  2. under Computer Configuration, expand models of administration and then click System.

  3. in the settings pane, click on disable AutoPlay and then click Properties.

  4. click on active, then on all players in turn it off the AutoPlay box to disable AutoPlay on all drives.

  5. click OK to close the turn off AutoPlay Properties dialog box.

  6. restart the computer.

  Thanks for choosing Patriot Memory.

  The problem I have is I plug in some usb drives and I don't want to open. I want to do all of them open or no. They seem to now open fine, it's not autoplay'ing I want to do.

  Thank you.

  GPEDIT is functional on windows XP Pro, xp family, that it will not work... In addition,

  If the USB functions are a problem, either upgrade the software of the chipset, either install the

  youre MB mfg software (intel, amd, etc.), the "chipset installation utility" has drivers,.

  software & programs of the operating system for its proper use. If you are running XP pro, & have installed chipset

  utility, then the procedure to run GPEDIT will be here: http://social.technet.microsoft.com/Search/en-US?query=GPEDIT&ac=3

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps