logical end always slider too far

Similar Questions

• HP photosmart 7510: alignment of the paper. When I print to my 7510 always prints too far to the right.

  When I print to my Hp photosmart, 7510, wheter be photos via AirPrint on. My IPhone or the Documentation of an environment of windows 7, or Mac os X or even my old windows xP it always prints too far to the right on the paper. This result s in all the text is visible. For photos of the result, is a white edge on the photo and cut off.

  I read manual and I have confidential amputeret that the paper is correctly placed. Else all works well, AirPrint and all absolutely no problem. updated to the last companies

  BECN, I saw this problem caused if ever there was a paper jam and something has filed in the mechanics of the printer. Here is a video on how to check for this:

  http://goo.GL/IDtwa

  Also, just to see if it is more than hardware/software partners, can you make a copy of the scanner and tell me how it turns out?

  Let me know!

• El Capitan too far?

  2011 MacBook Air.   2 GB OF RAM.   Always updated OS is up-to-date, but El Capitan seems too far.   Beach ball in Safari etc.

  Etresoft run suggest OF RAM.    If so, can I somehow return to Yosemite, which seems to work very well.   This MBAir has been completely problem free and realize time may be here to renew but short term a step backwards in the operating system would help if possible.   I did a check for bad things, but none here.   Then removed the verification tool to ensure that it was not slow me down.

  The system requirements for 10.10 and 10.11 are identical. 2 GB of RAM is pushing it. 2 GB is the strict minimum and may not be used for much in the view of many here.

  What "auditor" did you use?

• Paper feeds too far into the printer so that the top inch of the print page is lost

  White sheets of paper flow too far into the printer. This causes the top of the page to print.

  Hi pilot6856,

  I'm sorry to hear that you're always having paper a bad diet with your OfficeJet 6500 a Plus. Please take a look at this video and follow the steps in troubleshooting for affected by frequent problems of power.

  There are a few crucial steps that need to be done, please let me know if that helps. I look forward to hearing from you soon.

  Thank you

• HP LaserJet P1102W: HP LaserJet P1102w prints 1/2 inch too far down on the page

  When I print with that printer using Word, it starts about a half inch of print down on the page.

  I tried to reset to factory settings, but it does not always work on me.

  Any help would be appreciated.

  Hi @2poodles2 ,.

  I see by your post that when you print from Word, printing is printing too far to the bottom of the page. I'd love to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem. Select the method two.

  HP LaserJet Pro P1102 and P1106/P1108 Printer Series - printing a Configuration Page.

  You have this impression of question from other applications?

  If this isn't the case, it may be a margin setting in Word applications. Please check the margin settings.

  Make sure that the appropriate settings are defined in the properties of the printer and the application you are printing from.
  On the file menu in the software, click on print.
  Select the product, and then click Properties or preferences.
  Click the paper/quality tab.
  Check the Type of paper size, paper Source, paper, to ensure that they are correct.

  Try to print again.

  If you still have problems, copy the Word document and paste it into another program, such as Notepad, to see if you have the same results.

  What version of Word are you using?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the button below the thumbs up.

  Thank you. I look forward to hear from you.

• Icons are too far to the left on the allignment of monitor problem?

  The icons on the screen of the monitor are adjusted too far to the left.  If I could reach in and just move the entire screen an inch to the right, it would be good.  I asked a lot of people 'tech' and nobody seems to know how to solve this problem.  Any help would be appreciated.

  If only the icons are far to the left, you can simply drag-and - drop icons anywhere.

  If the entire screen, including the taskbar is far to the left, you can use the buttons on the monitor to adjust the size of the screen.

• I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  Try clicking on the Chrome icon & press f11 to maximize the screen.

  Kind regards

  Nicholas Lee Fagan

• Layer mask to prevent students from going too far outside the head on atypical forms of head

  For example, a frog head straight research has plenty of space to just cover your students should I look too far. If some sort of code called mask would keep another layer of screening outside it would be awesome!

  Thanks for the request. Have a mask clipping support or equivalent to deal with students is something that we are considering. For now, you might be able to diminish the value of the parameter eye gaze strength (in the behavior of face) in order to reduce the distance.

• Create a 1 page site - problems with the last section scrolling too far from scrolling

  I've created a 1 page site that works very well outside the final section, scrolling too far from scrolling. My site consists of a headr pinned, a footer pinned and 4 sections (defined by rectangles - each a 1011 pixels high). I used effects scroll to bring the items in and out.

  The site can be accessed here: Homepage

  The problem is with the contact us section, where you seem to be able to scroll further than the lower part.

  Here is my document, set the parameters:

  

  so my size is set on 4042 (although I've tried it with 4044-4 x 1011 - it makes no difference. When I click on the link to the contact section it seems fine, but I then seem to be able to scroll further down, and this seems dependent on the screen / the browser size. The problem is more pronounced with a smaller screen / browser size in height.

  I have tried everything I can think to do does not scroll beyond what it takes the anchor when I click the link, but whatever I do the problem seems to persist.

  I would welcome any suggestions on this and also General comments on the site. But help with the problem, first please.

  Thank you very much in advance - I'd be happy to publish the file of muse but can't seem to find a way to do it.

  Ian

  Hello iwatts3519,

  just make your master page longer. I don't have to correct the pixel length. This is a test and see option. Here is the corrected file:
  http://files-hh.Hirschen.de/_71isLr3WR8ABYR

• And I would add that I use Firefox, so my Start button is always on bottomm far left... Somehow extreme sound on laeft topp... Please help me if I can get it on background...

  I also use Firefox a distant sound always at lower left... Please help me to get on down to the far left... An it's my start meun...

  Your question is unclear, but I think you mean that your taskbar has found its way to the top of the screen.

  Right-click on the taskbar, and then click to remove the tick of locking task bar, then left click on the task bar and hold down the button then drag the mouse to the bottom of the screen and release the button. That must be put in place and you can lock the taskbar if you wish. The taskbar can be placed top, bottom, or on the sides and it will work normally at each location.

  Thank you very much.. I was just trying to find a way to tell everyone I finally got myself... A thank you very much tho. /. I hhave never done this before... It was weird...

• IM always defined as far on windows live messenger?

  I'm always defined as outdoors on windows live messenger, even when I re - choose available instantly goes back to far?

  any solution for it please?

  Hello

  I suggest try to download Messenger again. Most of the time, will correct the problem. But if not, please post your question in the below appropriate forum.

  http://windowslivehelp.com/forums.aspx?ProductID=15

• I extended the framework of Actions too far (F9)

  Don't ask me how, but I did my framework of Actions too long and I can't drag high enough to properly size.  Therefore, I don't see the end of my code without adding a whole bunch of empty space.  I know it must be easy, but I know do not understand!

  Any help would be appreciated.

  You can try to reset it to the default workspace (or your own layout if you created one).

  Window-> Workspace-> etc.

• standard pause at end of slides

  When you have no buttons on the screen, the film progresses from one slide to another until the end.
  
  However, I generally want the film to pause at the end of each slide. Instead of placing (and configuring) a button pause on each slide, is there a function available in the world to set up this break action, for example a Widget that is displayed for the rest of the project?
  
  Best,
  Jan

  Hi Jan,

  Here's the widget http://www.captivate4.com/2009/03/06/captivate-4-pause-widget/

  He has developed to detect how long each slide is and it automatically suspends 45 frames (1.5 seconds) before the end of the slide. Just insert it and select 'View for the rest of the project' and it is.

  What about a widget with buttons which becomes intact when you need to move forward, you could change the Adobe Widget - buttons perpetual to do.

  / Michael

• My modules are installed and above all always work as far as I can tell (icons on my status bar, for example), but Firefox tells me that no Add-ons are installed when I check the menu Add on - why this phenomenon happens?

  I use Firefox 5.0 on a MacBook with Snow Leopard. I have always used the latest version of Firefox, but I'm not 100% sure if the problem is with the update to 5.0 or later.
  I can't uninstall or update the modules in this way, which is quite annoying.

  This may be a problem with the files that store the registry extensions.

  Remove files (extensions.ini, extensions.cache, extensions.sqlite, extensions.rdf) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry.
  
  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions

  If you see people with disabilities, is not compatible extensions in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to do a compatibility check or see if there is an update.

• Everything takes so long to load always worked so far great

  I have an ipad. It worked very well in the past.  All of a sudden it takes so long to load

  All of a sudden it takes so long to load

  What you're trying to load?

  What have you changed recently?

  What are you doing time you turn on until the problems?

  ---------------------

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode