login page Gmail is in Finnish. Not English. What?

Similar Questions

• Landing/login pages for WiFi networks open not opening not in browsers.

  If I connect to an open WiFi network page that should trigger a login/landing when I open a browser while this happens not & although there is a local connection I can't connect to the Internet. Can anyone suggest a solution because I'm totally stumped!

  
  
  This is reflected in all the major browsers.
  I can connect to secure networks and via a thin Ethernet cable.
  The problem persists even with the firewall disabled (Norton).
  I have not installed ZoneAlarm.
  The problem persists even if ipv6 is disabled.
  The connection is set to acquire an IP etc automatically.
  I acquired the page URLS to connect to my iPhone, and even help entering them manually do not work.
  Ping the same areas fails 100%.
  It makes no difference to renew all network adapters by using the ipconfig command.
  The network adapters are installed and working properly.

  Hello

  You can view these methods:

  Method 1:

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also try resetting Internet Explorer and check.

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Can't get my facebook login page

  Cannot get my facebook login page. When she's not display page correctly.

  Hello and welcome!

  Please follow the guides here:

  http://Windows.Microsoft.com/en-us/Windows7/how-to-delete-your-browsing-history-in-Internet-Explorer-9

  Make sure you check all the boxes in the first guide, then:

  https://support.Microsoft.com/kb/923737?WA=wsignin1.0

• Blues login page

  don't need a login page, deleted, went into the shared components, definitions, security, changed to page 1 (page I want to first start) and he still wants the login page?

  Doug,

  Here's what you have to do...

  Go to your app, then...

  Components shared > authentication schemes > create >
  -"Based on a pre-configured gallery system.
  -No authentication (using DAD)
  -Enter a name for it (ie the 'Public')
  -Create the schema

  Now, once it's been created you to return to your authentication schemes... Click 'Current change' in the part superior, select the one you just created, and then click "Make Current".

  In addition, please see your other thread regarding this issue (Re: login Screen )
  Be sure to mark as answer/useful threads/assignments.

  I hope this helps.

  -Chris

• gmail login page always opens with my username and password already filled

  I go to the login page for gmail - little matter how I'm here via a bookmark or not - the page is always displayed with my username and password already filled. Questions (a) is not sure, anyone could sign as me simply by pressing 'back' (b) other users in the House need to back my details away in order to enter their own.

  I tried to reinstall Firefox - no use. How to make a gmail login page to open with empty boxes for username and password?

  Thanks in advance for any advice!

  It seems that your username and passoword are saved in your browser. You cannot remove from tools > Options > Security > saved passwords Panel. Also you can enable/disable this password box do not forget in the same pane.

• Two sites of finance not only loading login pages

  Before the latest updates Firefox loaded two Web sites without problems. Now site Colonial First State does not display a login page and the readings I have to update my browser. The Commonwealth Bank site lets connect me but will not open any account information. The Commonwealth bank helpdesk told me to use Google Chrome. I did and it works very well with both sites.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• WiFi hotspot redirection to login pages does not

  Hello
  I use Win7 64 bit home on a new laptop. Wireless works fine on the laptop to my home router, hidden SSID and WPA2 etc.

  When in use and about various points of access, I can connect to the network provider without problem - I get the IP address, DNS and gateway via DHCP by default correctly. However, hotspots use page hijacking to redirect the user to a login page to access the internet. This doesn't seem to work, and ive tried everything but another browser. Thus, the icon shows limited access (no internet) for the connection.

  The hotspots are correctly redirected to the login page with an iPhone and a friends XP laptop. I can't find that many mentions of the problem, so maybe it's just my question, but is a facility enough vanilla on the machine, and I tried with AV and FW disabled as a test. I see also THE whole relevant advanced options that seem to block the redirect.

  Someone else has encountered this and know a fix?

  See you soon

  Hello

  Try these

  (I) reset the TCP/IP stack.
  Go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357Disable the IP assistance service:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  (II) disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters. NOTE: You should do this for each network connection.

  Hope the info. is useful

• The NAC - OOB L2 authentication login page - does not appear!

  Hi all

  We have 2 managers of the NAC and NAC 2 servers. We have a failover solution. Our deployment is OOB layer 2 virtual Central Passage. We have successfully added the SIN in NAM and we did the requirements in NAM as a mapping setup VLAN (starting at vlan no reliable 913 to the vlan trust 910), adding managed subnet, change profile, profile, adding switches (cisco 3560) to NAM, the roles configuration on the user, the local users and also port user login page.
  Then, we tested it by connecting the PC to port controlled on the switch.
  The controlled port configuration was VLAN 910 and after connecting the PC, it is converted to 913 VLAN then we have successfully obtained an IP address from dhcp that is configured on the switch but the authentication login page appeared! and also, when disconnect us from the PC of this port, the configuration is not passed to vlan 913 to vlan 910 then manually change each time to do our tests.

  Do so that the login page appears and also automatically NAM to change the configuration of the port after having disconnected from the PC?

  Thanks in advance.

  AD SSO is supported with the Windows 2003, but with 2008, only single server is supported and which should also be 32-bit. 64-bit servers are not yet supported.

  HTH,

  Faisal

• Login page appears no not after cloning.

  Hello

  We have Oracle EBS 12.1.3 with database 10g RAC on RHEL.

  Recently, after cloning, we can not get the login page and the following error message appears: -.

  "Could not generate the redirect URL. "Exception: Oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating object that can be aggregated.

  Please guide in problem solving.

  Thanks in advance

  Are there errors in the database log files?

  Please check the files of application log for more information on the error-(Doc ID 1964851.1)

  Please also see (Doc ID 1598680.1) and (Doc ID 1626838.1).

  Thank you

  Hussein

• Oracle EBS R12 login page does not

  Dear professionals,

  We are running Oracle EBS R12 on Solaris SPARC. We are facing a problem with the Login Page does not appear. When I go through the database alert log file, it shows the TEMP teblespace was complete. After adding data in the TEMP tablespace file, it still does not. Nevertheless, it must bounce application. I need to know why after solving the question of space, Login Page didn't?  Why we must restart the application every time?

  Thank you and best regards,

  ARM

  Hello

  You don't have to restart the application.

  Just restart the process of oacore.

  On which version of R12 are you?

  Thank you

• not able to open vro configuration manager if State HTTP 400 Error - Invalid reference directly to the form login page.

  

  Hello

  You are not directly correct the VRO login page login, please take new private window and open the URL. https://IP:8283 / vco-config /

• Login page is not coming

  Hi all

  We try to clone the Oracle EBS 11i. DB is on linux and Conc nodes system and Apps are under IBM AIX, respectively.

  Env PROD also has the same configurtion. Cloning is successfully completed. whenever I try to connect to the login page using the browser, login page is not coming.

  Suppose that when I give the http:/host.domainname/, Apache page url is not coming. Everything starts fine and I n ' see no error in quickly to open one session other than the resumption of normal operations.

  I would like to say one thing here that public ip address of the database is not to ping the application server queries, but db virtual ip's ping requests. This is the cause of the problem.

  When I give only hostname in http://fnclbkp.UAT.com , it displays no page found. Apache atleast page should appear.

  I guess the problem is with the ping command.

  Details of the env

  Version of DB - 11.2.0.4

  DB Os - Linux

  Version of apps - 11.5.10.2

  Apps for AIX operating system - IBM

  Please suggest.

  Thank you

  Sarah,

  When I give only hostname in http://fnclbkp.uat.com , it's show no page found. Apache atleast page should appear.

  Have you tried with ip addess http://:

  Customer is able to ping the IP. IP address database public physics isn't to ping the application server queries. Otherwise, it's to ping across queries.

  Customer is able to ping to fnclbkp.uat.com ?

  ping fnclbkp
  ping fnclbkp.uat.com
  

  Concerning

  SANAE

• Login page does not work

  Hello

  I developed the admin dashboard a simple for my project.

  
  

  http://BHC.edu.in/BHCNET/admin/login.php
  

  
  

  The login page works well in localhost. After the download on my site, the login page does not work.

  
  

  It shows that the user name and password is incorrect. Kindly help me.

  username : admin

  password: admin

  Here is my code.

  <? PHP

  session_start();

  ? >

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < h1 align = "center" > welcome aboard the Admin! < / h1 >

  < img src = "Images/Admin - icon.png" width = "200" height = "200" style = "float: left;" Display: block; "class ="admin">

  < do action = "login.php" method = "post" name = 'loginform' id 'french' = > "

  < table width = "278" height = '174' border = '0' >

  < b >

  < td width = "102" height = "59" > < label > user name: < / label > < table >

  < td width = "187" > < input type = "text" name = "user name" placeholder = "Enter your name" / > < table >

  < /tr >

  < b >

  < td = "46" height > < label > password: < / label > < table >

  < td > < input type = "password" name = placeholder "password" = "Enter your password" / > < table >

  < /tr >

  < b >

  < td = "37" height > < input type = "submit" name = "login_but" id = "login" value = "Login" / > < table >

  < td > < p >

  < input type = "reset" value = "Reset" name = "reset_but" id = "reset" / >

  < /p > < table >

  < /tr >

  < /table >

  < / make >

  < / body >

  < / html >

  <? PHP

  If (isset($_POST['login_but']))

  {

  $name = mysql_real_escape_string($_POST['username']);

  $pass = mysql_real_escape_string($_POST['password']);

  $encrypt = md5 ($pass);

  include("include/Connection.php");

  $query = "select * from users_login where name = '$name' and password = '$pass'"; "

  $run_query = mysql_query ($query, $conn);

  If (mysql_num_rows ($run_query) > 0)

  {

  $_SESSION ['username'] = $name;

  echo 'window.open ('index.php', '_self') < script > < /script >';

  }

  on the other

  {

  echo "< script > alert ("user name or password is incorrect!") < /script > ';

  }

  }

  ? >

  Kindly help me.

  Thank you in advance.

  There are two things that stand out immediately as incorrect:

  • You call mysql_real_escape_string() before connecting to the database. The connection must come first.
  • You use the original functions of PHP MySQL. They have been deprecated and do not work on several servers. Use MySQLi .