Login to planning problem

Similar Questions

• Split power plane problem

  Hello again friends.  I am trying to create a section inside my plane of power to a different voltage.  I thought I was on a pretty good track, but I'm not quite there happen.

  First, I created a Dungeon area in the plane which has VCC entrusted to him.   Then, I created a net group containing only VCC and assigned this group to keep it out of area.  So far so good, it works beautifully to create a square hole in the plan and I can get other things inside the hole.

  Then I created a new box of copper inside the hole square (with some space between the two of course) and he attributed to net VCC2 (my second voltage).  I want to have active urination so it will leave a space around my signal vias just as do other aircraft.

  Here's my problem.  If I disable the invalidation, the whole of the area fills with copper, but crashes into the vias that I expect.  If activate the invalidation, the whole thing disappears!

  Someone at - he a clue as to why this is happening?  Is it because it's inside the VCC plan?

  Is there a better way to go about this?

  Thank you

  Dave

  OK, I was apparently waaaay overthinking on this one.  If I simply draw the box of copper to VCC2 just above the power plane, the plane cancels around him and everything seems fine.

  All the stuff of the place was not necessary.

  Thanks again for the help.

• Validation of data as a planning problem

  Hyperion gurus

  I have a form of planning that has 4 columns.

  -The first is a Smartlist task status.

  -Second and third are read-only powered by another system.

  -The fourth column is when users enter data

  Users need the ability to color the cells in the fourth column based on the status of the task they choose in the first column.

  If it is 'finished' so red and so 'in progress' or 'not started' then green.

  I created a Data Validation rule that works but the problem is line is highlighted instead of just the cell in column 4.

  Basically, I want to

  If column A = 1 (option smartlist) then column D = Red

  If column A = 2 (option smartlist) then column D = Green

  Etc, but cannot make it work.

  I tried and plays a lot with options, but does not work. I enclose the form and the Validation rule. Any help or ideas is greatly appreciated. Thanks in advance.

  SV

  I checked your doc and the location is set to 'Grid', which means that it requires a level of grid. You can also configure at the cellular level. Try it and tell me if this helps

  HTH

  Amarnath

  ORACLE | Essbase

• New on VMWare... Login and password problems

  Hi all

  I inherited a few major COMPUTER disasters with a client. I'm new to VMWare and have found that several virtual servers are no longer running. We have pay to this topic. When I run the Home Page of VMWare Server it takes me to VMware Infrastructure Web Access with a login and password, but I have no idea what could be. The person who set up the system is not reachable. Is there a way to identify and fix this mess?

  Thanks in advance.

  Rob

  Please reward points - we must know if we helped.

  Click here to solve the problem-[http://communities.vmware.com/docs/DOC-9390: d-9390]

  Click here for the manual http://www.vmware.com/pdf/vmserver2.pdf

• Discoverer and planning problem

  Here is my Configuration:
  OracleBI Discoverer 10g (10.1.2.3)
  Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
  Discoverer of model - 10.1.2.55.26
  Discoverer Server - 10.1.2.55.26
  End user layer - 5.1.1.0.0.0
  End user layer Library - 10.1.2.55.26
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  Copyright © 1999, 2005, Oracle. All rights reserved.
  
  
  First of all, Disco scheduling and more works very well in our production instance. In the case of our test, I have a user who wants to plan cabinets at any time where a new folder is tested. My problem is that when I'm on the second stage of the Scheduling Assistant and I select immediate (or manually place once in it's very soon for example (5 minutes from now)), the workbook took hours yesterday to show 'regular' in the tool «Managed workbooks» regular
  Today, it works very well and runs immediately. I created a very simple workbook titled, "scheduling test", which has a column, a calculation which is the sysdate value. I started to test this yesterday.
  
  Is - any thoughts on what is causing this trouble?
  
  I did the following:
  1. I've noticed that a package is created in the scheme of planning for the workbook on demand.
  2. I tried to interview for scheduled tasks, created by dbms_job (questioned Dba_Jobs using the system account and did not work... neither yesterday nor today).
  3. I tried to query v$ sql with the intention to see when the package, batch_rep_secure.submit_job, is run... but don't put find regular reports.
  4. I tried to glean information from the tool to 'Manage workbooks on demand' with the administrator of Disco, and the duration column is null (yesterday).
  5. I got our dba search the file init < sid > .ora and confirmed that the job_queue_processes have been set to 10.
  
  To remedy this, yesterday, I just manually executed the package, EUL5_BATCH_PACKAGE10061409140713, and shortly after, the regular workbook would have a new table associated with that is consumable by Disco more.
  
  My hunch is that our work queue has been saved significantly yesterday and it was delay the planning and execution of regular exercise books.
  
  Do any have ideas on what the root cause was here and how can I confirm this?
  
  
  Thank you
  
  Patrick

  Hi Patrick
  It would be too my intuition. You can also consult the database of the tp privileges each user. Here is what I use:

  accept prompt'Enter username username: '
  accept pword prompt'Enter password: '
  create user & username identified by & password;
  Grant connect, resources to & username;
  grant analyze everything to & username;
  grant create procedure, create the sequence of & username;
  Grant create session, create the table in order to create & username;
  Grant execute any procedure to & username;
  grant global query rewrite in & username;
  grant select any table, unlimited tablespace to & username;
  Grant execute on sys.dbms_job of & username;
  Grant select on sys.v_$ parameter of & username;

  Best wishes
  Michael

• UDA workload in planning problem

  Hi guru,.
  I found a way to load several UDA (in my case are just 2) the Member of the account with ODI.
  
  My steps:
  (1) load dimension with all necessary members of the uda UDA
  (2) load on the dim the parent, child, alias... account and the uda (relative to the ACC_UDA1 area)
  (3) the load on the Sun account (the same record from the previous load, except for the area of the uda in witch I load a different value)
  
  ex: PARENT: AAA
  CHILD: BBB
  ALIAS: CCC
  ACC_UDA1: AA1
  ACC_UDA2: AA2
  
  What I expect is that as soon as the BBB member, are associated both the uda (ZZZ and KKK).
  But what happened is that, after the second load, one UDA is associated with the Member, just the last one loaded... I think the IKM is using the update method.
  
  So, are any of you solve this problem?
  any help will be be appreciated.
  
  THX in advance,
  Paolo

  Hello

  You have my blog and several aggregates load planning, or even have a read here .

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Load data into Hyperion Planning problem with police? Thai tank.

  Hello
  
  Can someone help me I just load the ODI in Hyperion Planning data; However, it has char Thai in my data. When I see data in Hyperion Planning, char Thai converts? instead. So, how can I load data without problem of tank with ODI fonts? Any expert! Please help me for this
  
  
  
  < img src = "http://img10.imageshack.us/img10/6087/20090316155228.th.png" border = "0" alt = "Free Image Hosting at the www.ImageShack.us" / >
  
  < img src = "http://imageshack.us/img/butansn.png" alt = "QuickPost" border = "0" > QuickPost this image to Myspace, Digg, Facebook, and others!
  
  In Journal of Hyperion, there is no error here
  
  2009-03-16 15:14:47, 847 [DwgCmdExecutionThread] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
  2009-03-16 15:14:47, 847 INFO [DwgCmdExecutionThread]: connection to the planning application [Budget] on [192.168.3.20]: [11333] using [hypadmin] username.
  2009-03-16 15:14:47, 925 [DwgCmdExecutionThread] INFO: successfully connected to the planning application.
  2009-03-16 15:14:47, 941 INFO [DwgCmdExecutionThread]: loading for the charge of planning options
  Name of the dimension: location like Parent child: true
  Order By entry load: true
  Update the database: false
  2009-03-16 15:14:48, 019 INFO [DwgCmdExecutionThread]: beginning of the loading process.
  2009-03-16 15:14:48, 019 DEBUG [DwgCmdExecutionThread]: number of columns in the result set of source does not match the number of columns planning targets.
  2009-03-16 15:14:48, 066 [DwgCmdExecutionThread] INFO: type of load is a [member of the load dimension].
  2009-03-16 15:14:48, 285 INFO [DwgCmdExecutionThread]: circular reference detected Possible, abandonment of sort and continuing with load. 1368 possible circular reference documents found.
  2009-03-16 15:15:14, 660 INFO [DwgCmdExecutionThread]: load the process is complete.
  2009-03-16 15:27:45, 821 [DwgCmdExecutionThread] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
  2009-03-16 15:27:45, 821 INFO [DwgCmdExecutionThread]: connection to the planning application [Budget] on [192.168.3.20]: [11333] using [hypadmin] username.
  2009-03-16 15:27:45, 883 [DwgCmdExecutionThread] INFO: successfully connected to the planning application.
  2009-03-16 15:27:45, 899 INFO [DwgCmdExecutionThread]: loading for the charge of planning options
  Name of the dimension: location like Parent child: true
  Order By entry load: true
  Update the database: true
  2009-03-16 15:27:45, 962 INFO [DwgCmdExecutionThread]: beginning of the loading process.
  2009-03-16 15:27:45, 962 DEBUG [DwgCmdExecutionThread]: number of columns in the result set of source does not match the number of columns planning targets.
  2009-03-16 15:27:45, 993 [DwgCmdExecutionThread] INFO: type of load is a [member of the load dimension].
  2009-03-16 15:27:46, 165 [DwgCmdExecutionThread] INFO: circular reference detected Possible, abandonment of sort and continuing with load. 1368 possible circular reference documents found.
  2009-03-16 15:28:14, 540 [DwgCmdExecutionThread] INFO: planing cube refresh initiated.
  2009-03-16 15:28:22, 993 INFO [DwgCmdExecutionThread]: planning of the cube refresh operation completed successfully.
  2009-03-16 15:28:22, 993 INFO [DwgCmdExecutionThread]: load the process is complete.

  Hello

  I'm glad you find the blog useful.

  I understand that you use 9.3 and to prove that it is not a question of ODI, log into planning from the web, add one manually with thai characters, then refresh the application to push information to essbase, then look at the Member in EA.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Please Help - Adobe Plan problem

  So I'm in high school and I need a plan of adobe. I saw there is a student and like many, I understand that I can get it as long as my school is taken in charge or something? I live in Toronto and I head the TCDSB, someone know how I can get the 60% off all the apps you plan.

  http://www.Adobe.com/products/creativecloud/students.edu.html

  http://www.Adobe.com/education/students/student-eligibility-Guide.edu.html

  Adobe in education... Start here https://creative.adobe.com/join/edu

  Educational https://creative.adobe.com/plans?plan=edu

  FAQ https://helpx.adobe.com/x-productkb/policy-pricing/education-faq.html

  When you purchase a subscription to education, the terms you "click to accept" should be clear about the first/last years

  -Intro price http://forums.adobe.com/thread/1448933?tstart=0 one can help

  Redemption Code https://creative.adobe.com/educard

  Proof of ID http://www.adobe.com/store/au_edu/academic_id.html

• Manage approvals - start Cycle of planning problem

  Hi assistants.
  
  When I try to start the Cycle of the Plan I received the error message in subreport area. Failed: Unauthorized new owner. I checked the rights of all dimensions and configurations and its fine appearance.
  users belong to HypGroup who have the role of provision: Planner, that should be enough to put fieldsa Forms data and tasks. in planning, they have rights to all necessary dimensions, which have been repeatedly verified.
  
  be honest, I don't know where and what I need to check more.
  
  might you have any suggestions?

  It's very disappointing. Here is what im going to recommend you to troubleshoot. Ive seen this error several times as I'd like. create 2 new users. Available as planners and give them roles of approval with the appropriate dimension security administrator.

  now see the error disappeared, pare away the return authorization roles until you see the error again, and you will understand.

  It is easier to do it this way and learn what you say the dish.

• Create a worksheet for planning problem

  I've done a first publish on my IOP model and I am trying to create a planning worksheet.
  
  When I click on "Create-> planning worksheet" in excel using the opens new spreadsheet analysis, but when I click on 'Spreadsheet designer' in Excel it opens a screen for digit username and password and do not open the tab to select the cube and measures.
  
  Can someone help me?
  
  Thanks and greetings
  Danilo Tomazin

  You use 4.0.1? It was an issue that was fixed in 4.0.2.

• OS 6.5.1 - RC1 can plan problem

  
  
  

• APEX 4.1 Login page kills the existing session cookie

  So far the session cookie enabled us to figure out if the user has already had a session and redirect them to the page they wanted using this session (thanks to a method on the page of connection). Just try APEX 4.1 and it seems that this quick hack will not work, because:
  a. the session cookie has been replaced by the time that the login page is loading
  b. the login page gives no clue as to the destination of the user actually wanted (used to be able to verify OWA_UTIL. GET_CGI_ENV('QUERY_STRING') to see what looked like the URL, but now the URL is simply the login page)
  
  The problem that I am trying to solve is a job of logging system where users get a lot of e-mail notifications. With the standard behavior of the APEX, they will have to identify each time they click on a link in an e-mail. Because it is a rather unusual behavior for another web application, I used, anyone has any ideas about how to get the APEX to stop killing sessions by substituting the cookie whenever it sees a URL he dislikes? Have tried to use the session 0, but still it beats my cookie.

  Hey Capt egg,

  Nice to see that you studied and found a solution. However, I think that things can be a bit improved. It seems that you already used a custom authentication scheme, it is good, because it allowed to use application session hooks join. However, I think that this does not exactly what you expect.

  During the installation of the session, at the beginning of the Summit "request for treatment, he runs about this code:"

  1 write the session id of the query (parameter to URL or POST) in a global variable
  2 load of metadata application authentication (cookie name, Sentry function, function of invalid session, etc.)

  3. If a global session exists, run "Builtin Cookie Sentry":
  3.1 query the table of the session by the value of the cookie.
  3.2 If the session of the query id matches the overall session id, session information matching.
  3.3. in the case, the session information is incomplete, reset the session variable.

  4. If this is not the login page, run application-specific Sentinel:
  4.1 run the result of the Sentinel session function if a function is defined
  4.2 If the Sentinel returned true function, run the validation function if it is set

  5. "create / reuse Session."
  5.1. If the session variable points to a valid session record, the user to read and other variables of the session save
  5.2 in the case, create a new session not authenticated

  6. write a new cookie in HTTP session if a new session was created

  7. If the sentinels (4) returned false, run 'Invalid Session Manipulation':
  7.1 save deep link in the current page
  7.2 run invalid session function if a function is defined
  7.3 redirect to url "Invalid Session" of authentication

  This is only an overview and implementation details may change. However, I think that it can show major problems with the help of the function of invalid session for Assembly of the session:

  -In (4.1), the engine creates a record of the session and the session id
  -In (6), the engine creates a session cookie
  -Invalid session feature modifies the session global variable id back to the old session, but there is still a newly created session
  -The function of session invalid re-inits the htp buffer and thus cancels (6) high. The connection of the session would create a new session for each request, otherwise.

  My suggestion is that you use a sentinel of session instead. Here is an example:

  function session_joining_sentry return boolean is
    l_cookie_session_id number;
    l_user              APEX_WORKSPACE_SESSIONS.USER_NAME%TYPE;
    l_result            boolean;
    procedure dbg(p_str in varchar2)
    is
    begin
      apex_application.debug('session_joining_sentry: '||p_str);
    end dbg;
  begin
    if APEX_CUSTOM_AUTH.GET_SESSION_ID is not null then
      dbg('apex could already determine session by URL session id and cookie value');
      l_result := true;
    else
      dbg('apex could not determine session by URL session id and cookie value');
      l_cookie_session_id := APEX_CUSTOM_AUTH.GET_SESSION_ID_FROM_COOKIE;
  
      if l_cookie_session_id is not null then
        dbg('apex found session via cookie. we try to re-use this as our current session id');
        begin
          select user_name
            into l_user
            from APEX_WORKSPACE_SESSIONS
           where apex_session_id = l_cookie_session_id;
          l_result := true;
        exception when NO_DATA_FOUND then
          dbg('session could not be found in session table - sentry fails');
          l_result := false;
        end;
  
        if l_result then
          dbg('re-using session for user '||l_user);
          APEX_CUSTOM_AUTH.DEFINE_USER_SESSION (
            p_user       => l_user,
            p_session_id => l_cookie_session_id);
        end if;
      else
        dbg('apex could not find the session cookie. sentry fails');
        l_result := false;
      end if;
    end if;
  
    return l_result;
  end session_joining_sentry;
  

  Also, it should be noted that the session join is precarious. If you plan to implement this, please make sure that you understand the dangers of the cross-site request forgery:

  http://en.Wikipedia.org/wiki/cross-site_request_forgery

  Kind regards
  Christian

  Published by: Christian Neumueller on March 2, 2012 04:24

• Very Urgent: Hyperion System 9 planning Licence was encountered

  Hello
  
  I am working on the planning Version 9.2 X. Every weekend, planning of Hyperion Essbase and the servers are scheduled to start. After that, all services are either recycled as part of the weekly maintenance. The next day, when I tried to connect in the planning, I have below question soon after restarting the server. To resolve this problem, again once I stop and start all services. Please see the below error and its server log.
  
  Can you please help to fix this problem causes.
  
  And another question with another planning Application: this application doesn't have this kind of problem, but it has a strange question. Also, this application will under weekly maintenance and not a problem with the connection. But, if I don't connect quickly after the server and recycle the Services, the business rules that are scheduled to run does not start. I have the connection in planning to set the rules of the business to run.
  
  Please suggest me if I need to change the settings with the properties of planning in order to overcome these problems.
  
  Thank you
  UB.
  
  Planning problem of Login and its journal errro:
  
  Was a problem with the Hyperion System 9 Planning license. See the log for more details
  
  # < 24 January 2010 10:31:56 CEST > < error > < HTTP > < Servername > < SharedServices > < ExecuteThread: '6' for queue: 'weblogic.socket.Muxer' > < < < > WLS Kernel > > < BEA-101215 > < Malformed Request ' / HTTP 1.0. Request the analysis failed, Code:-10 >
  # < 24 January 2010 10:35:29 CEST > < error > < HTTP > < Servername > < SharedServices > < ExecuteThread: '6' for queue: 'weblogic.socket.Muxer' > < < < > WLS Kernel > > < BEA-101215 > < Malformed Request ' / HTTP 1.0. Request the analysis failed, Code:-10 >
  # < 24 January 2010 00:51:56 this > < error > < HTTP > < Servername > < SharedServices > < ExecuteThread: '6' for queue: 'weblogic.socket.Muxer' > < < < > WLS Kernel > > < BEA-101215 > < Malformed Request ' / HTTP 1.0. Request the analysis failed, Code:-10 >
  # < 24 January 2010 00:55:26 this > < error > < HTTP > < Servername > < SharedServices > < ExecuteThread: '6' for queue: 'weblogic.socket.Muxer' > < < < > WLS Kernel > > < BEA-101215 > < Malformed Request ' / HTTP 1.0. Request the analysis failed, Code:-10 >
  #

  user640496 wrote:
  Why connect after services recycled? Is this a product bug or it is practical common to open a session in planning to run the BR, once that services recycled.

  It has always been like that, I've never understood the logic but it is like that...

  In addition, please give your input on this issue which was raised at the beginning of this thread.

  Was a problem with the Hyperion System 9 Planning license. See the log for more details

  I'm not sure on this one here, have you checked any of the license server logs, I would contact Oracle if nobody else comes with a few ideas.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem, the signals and Slots

  Hi, as I posted in one of my other posts I have following problem with signals and messages and would be nice if someone could clarify anything that I don't seem to be able to find what the problem of the outputs.

  I have the code:

  void MYNetworkClass::requestFinished(QNetworkReply* reply)
  {
  
        // Check the network reply for errors
        if (reply->error() == QNetworkReply::NoError)
        {
           // read response
           const QByteArray response(reply->readAll());
           qDebug() <<"Response: "<< response;
  
           JsonDataAccess jda;
           QVariantMap results = jda.loadFromBuffer(response).toMap();
  
           QVariantMap data = results.value("SomeData").toMap();
  
           emit signalSuccess(data); // I reach here .... 
  
  // however actually when I click "Step Over" in debug mode, and try to exit the function// afterwards I get such "error" saying: No source available for "QMetaObject::activate() at  0xb9668da7" - highlighted in red.
  
       }
       else
       {
           qDebug() << "\n Problem with the network";
           qDebug() << "\n" << reply->errorString();
       }
  

  In MyNetwork class I also added the definition of signal in the header file:

  signals:
  
      void signalSuccess(QVariantMap result);
  

  Now also when someone calls an object MyNetworkClass method which calls requestFinished,.

  I want to catch the signal which is emitted by the requestFinished - as shown above.

       MyNetworkClass *network = new MyNetworkClass();
  
      QMap params;
      params.insert("username", userEmail);
  
      bool res = QObject::connect(network, SIGNAL(signalSuccess(QVariantMap)), this, SLOT(SomeSlotForSignal(QVariantMap)));
  
          Q_ASSERT(res);
      Q_UNUSED(res);
          network->makePostRequest("Login");
  

  My problem is that the SomeSlotForSignal slot never is called... (even if the signal is issued constitute requestFinished method and as I stated SomeSlotForSignal as a crack in the header file...) What can be problem? Any help? Thank you.

  I guess I solved the problem.

  The code I presented previously registered function

  F of a class B:

   void B::f()
  {
  MyNetworkClass *network = new MyNetworkClass();
  
      QMap params;
      params.insert("username", userEmail);
  
      bool res = QObject::connect(network, SIGNAL(signalSuccess(QVariantMap)), this, SLOT(SomeSlotForSignal(QVariantMap)));
  
          Q_ASSERT(res);
      Q_UNUSED(res);
  
  network->makePostRequest("Login");
  }
  

  Then the function f is called to:

      B object;
      object.f();
  
  The problem was I think that when the server responded "object" was destroyed from the stack. When I replaced the above code, with 
  
       B* object = new B();
      object->f();
  
  I think it works now......
  

• APEX listener returns the empty login page

  APEX 4.2.2

  APEX 2.0.2 listener

  GlassFish 3.1.2.2

  The platform is 32-bit, Linux, Amazon EC2

  I am reasonably sure I have properly deployed the apex.war and i.war to Glassfish and set a virtual path and database connection correctly.

  When you run Firefox on the EC2 machine, access to the

  http://localhost: 8080/apex/dad1.

  does not return a login page, no problem. But navigation externally visible publicly address (I have to hide the real address, I'll use a.b.c.d) of the hosting machine or across the net returns a blank page:

  http://a.b.c.d:8080/apex/dad1.

  The success of this operation:

  http://a.b.c.d:8080

  I get the standard Glassfish page so I know Glassfish is listening on that address.

  I also tried from the stand-alone earphone, and I get the same effect: it refers to a login screen when browsing the localhost, but go to the external address, I get a blank page.

  The pages are really blank, there is no indication in the source of the page and it's all Firebug returns:

  <html>

  <> Chief

  "" <link title= "wrap long lines" " href="resource://gre-resources/plaintext.css" type="text/css"" rel= "alternative style"> "

  < /head>

  <> body

  <>of thepre< /pre>

  < /body>

  < /html>

  
  

  I tried to enable the query server side, but I have yet to find the way to produce the equivalent of an access.log. Searching the forum produced a few references to "routing rules" but I couldn't find what and where he could be.

  As the listener works perfectly when you go to localhost, I can't believe that rthis is the common problem of not finding the vivid, or url mapping problem. But I am of course open to suggestions!

  Any idea will be welcome.

  Thank you for your time.

  Fixed. Finally tracked it, a redirection problem fixed with the patch 16760897.

  Thank you to everyone who watched this, I'm sorry to have lost your time, hope to post the solution will help someone else.