logo on the first slide in Captivate

Similar Questions

• How to get an overview of Captivate 4 to begin with the first slide to look at a second?

  I created a slide show-125 in Captivate 4. Some slides are in short (1 s <) video capture, but most of them are simple slides with audio narration.

  The presentation plays very well the first time that somebody is watching. Then, on the viewings, the presentation (that they are placed in the context of the html file or by opening the .swf directly) jumps to the position it was in during the previous display. Seen online, people notice a slight delay, so that it plays the first half second of the first slide, then jumps. For people who watched the video completely through, the presentation seems to spend the first half of the second ('welcome... ") to the last slide ("Thank you for watching,"etc.). This proved confusing for our customers.

  Is there a way to get the presentation to forget that this timestamp and just start from the beginning each time someone opens? I looked in Edit > Preferences and the help documentation and have found no setting for it.

  As stated in the FAQ, I'll try to break the presentation into three smaller, then string those together. However, I would be surprised if this has solved the problem, given that the presentation does not seem to suffer from amnesia, but rather too good a memory.

  Hello

  You use the Table of contents feature? Looks like you are.

  Click project > Table of contents and click on the settings... button.

  Uncheck auto to the pace of learning.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• When I include a Table of contents in my project and get an overview of the project, it always starts with a blank slide that contains an arrow to 'start '. That's fine, but I really want to start with the first slide in the deck. How to change that?

  The Captivate TOC suggests that the first slide must be 'System Basics title Page'. But instead, I get the screen below. You must click on the arrow to start the course. Not terrible, but I'd rather just start with my first slide. Ideas?

  

  If this isn't HTML, you will have to leave checked AutoPlay. Normally SWF-output supports automatic playback. Check the preview in the browser instead of draft Preview.

• Reading not systematically hiding on the first slide bar

  Hello

  Another issue/question - I seem to have a large number of them suddenly.

  I build a project with a series of video slides where I want to use the playback bar as a means of uses to turn early, legends, etc. on video slideshow and break.  But I don't want the play bar on the first slide, which is just a simple swipe of welcome or any of the other non-video blades.  I thought it was an easy thing to do by setting "Hide bar reading" action entering the slide.  I thought that was working fine, but now I noticed that when I test the project, using the game in Web browser option or actually publish the site, the PlayBar appears at least half the time.  If I just refresh the browser it disappears... sometimes.  Sometimes, if it does not and if I hit refresh, it pops up so...  I put the project on a server and played from a different computer (a PC, because I'm on a Mac) and I get the same behavior always incompatible.  The playback bar hide work regularly in other slides a simple action or as part of a tip or shared action.

  I don't remember if this happened on earlier versions of the project, but it may well have been because I wasn't really looking for it.  I have nothing particularly advanced past in that the first slide and the only thing I could think was 'different', that an average project was that I used the widget CPGuru OCD, but I took on the first slide just to check, and that doesn't seem to change the question.  Does anyone have an idea, what could be the cause so I can get him to stop?

  I understand a cludge which seems to work, but don't really want to use it.  Basically, I duplicate the slide, remove the break of all elements (in this case a box single click) and then reduce the duration of all the elements and the slide itself juste.1 second - so I basically start the project with a duplicate version of .1second of the first slide that runs immediately in the 'real' first slide.  In this way, it seems that if she fails to close the IPL when he effectively reload this slide it hides the PlayBar so that the user sees only a small Flash.

  Any help in debugging this I can avoid the cludge is greatly appreciated.

  System:

  Mac Pro runs the Mavericks

  Captivate 7.0.1.237

  Flash Player 10 selected in the editing preferences

  Sometimes, depends on several factors, advanced by the first on enter (or simple) action has a slight delay and that's what I think. Was the same in all versions. The only solution is to avoid action on enter on the first slide, to add a short slide you did and trigger the action at the beginning of the second slide.

• Hold the first slide until

  Captivate v4

  I need to be able to open a project on slide 1, but as soon as the blade is open should not run and wait until I have clciked and 'invisible' area to launch the project in the slide.

  Because I want to use the first slide as "intro", while the spectators are get sorted and once they are ready, I can start the project.

  I tried to add a box to click initially, but appears not to brake the slide as soon as it starts.

  Can someone help me please - I'm sure it's something simple, but just escapes me.

  Noel

  Noel, another option, you may think is just to deselect the auto play option in the preferences of Project Start and End.  This will give you a button on the first slide you have to click to start.  Only problem is, you cannot change the position or appearance of this button, and slide behind it will probably be a bit blurred.  Just a thought.

• Import the background music for the first slide

  I imported a background music, but I need only for the first slide. It should be an introdcutory with music background and recorded spoken text flashfilm.

  How can I limit background music to the first (and last) slide only?

  Thank you, Miriam

  Hello

  Rather than import the background sound try importing audio to the slide. If you are using Captivate 4 or 5, you will then have an option for audio looping. This will allow you to have the loop on any number of individual slides. In your case, the first, and last slides.

  

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• How to remove the bar at the bottom of the first slide?

  Hello, I have a thin dark grey bar which crosses the bottom of my first slide (like a windows taskbar). It is only on the first slide, and that's on top of my background image. I assumed it was something to do with a game bar, but I removed the playback controls in the skin Editor.

  However, this bar is always on the first slide.

  I have no idea what it's called or how to get rid of.

  Thank you in advance.

  I found the problem.

  The theme that puts bar here. (I thought that I had started with a blank slide)

• Can you get rid of the logo of the first clip at the end of the video?

  Can you get rid of the logo of the first clip at the end of the video?

  Yes.

  By PremiereClip,

  Go to preferences (the little icon in the upper left corner of the iPad)

  Clear the option 'Add Bumper'.

  I don't mind the bumper - he adds a little "Hang time" on the video without going straight to black or put in a long fade at the end.

  Sometimes it works, sometimes it's cleaner.

  A: here is what I did where the ring of the bumper has been very well

  Pinball Hall of Awesome

  HTH

• How to limit the first slide to play?

  Could someone tell me please how to limit my first slide to play again. My app opens web pages specified with a click of a button. When I use the back button on my phone to close the web page, it goes back to the intro slide and it plays again. I like the back button to bring the user support to the last page visited, but I don't know how to do this. Help, please.

  Can you explain better? You ask "to last visited page/slide" but since the beginning of your question, I realized that this is the first slide? What do you really want?

• Project start is not on the first slide when published and presented in preview (CP7)

  I have a problem in some of the projects where she will start on the second slide when released instead of the first slide. What are some settings I check to fix this?

  In my experience, it is never a good idea to place anything on the first slide of the movie because sometimes these things get skipped.  Always start the elements of the screen on the second slide.  Keep the first blank slide and make lasting 2-3 seconds.  In this way, preload may attempt to ensure that all the bits necessary to start the 2 slide are aboard, before its opening.

  Another question, can you do to avoid problems at the start time is NOT placing a video heavy of introduction on the first two slides.  It's just ASKING for trouble.

• How to get the number of the current slide in Captivate 9?

  With the help of Cap 9.

  Is there a system variable containing the number of the current slide?

  I build a quiz with a drag and drop interaction in the pool of questions. Naturally, the built in Question x of y object is not included, so I have to build a replacement of some sort. Found some old posts on this topic, but the proposed solutions do not seem to work with the current version of Captivate.

  Yes, cpInfoCurrentSlide.

• 6. trouble with pieces of the slide next poster/bleeding on the current slide in Captivate

  Similar to this thread - http://forums.adobe.com/message/4734635 - where unfortunately no resolution has been published.

  I use 6 Captivate and I have a problem with pieces of the next slide after the current one, display/bleeding on the current slide.

  This is visible when published.

  There is no transition on the slides.

  It is published in SCORM format, but the error also exists on the pdf file when it is published as.

  Any advice on how to fix this please?

  Please see screenshot below. Thank you.

  

  Disable the compression options in the preferences one by one and publish again until you see the results.  It is usually the advanced project Compression option that is responsible.

  See this page on the project preferences:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/how-to-set-up-preferences

• After the first slide

  The option for my presentations to mark as finished after a set number of slides is not working properly. No matter how much I slide to use State as completed, the presentation is marked as completed by my LMS after viewing the second slide.

  I have installation using Articulate training and it works very well with my LMS. Is this a problem with Captivate or am I might not create an option properly?

  I realized what was wrong with that. Slide view completion is only a percentage of slides do not play the number of slides. Information about Adobe using Adobe Captivate with other Applications page are incorrect to explain this value as it says"Slide views only the status is sent as Pass/complete only after the user has completed viewing the prescribed number of slides". Since I was setting the number to a very low value, as the module has many slides, the second slide was validate the low number so the reason why it ended after accessing the second slide.

• How to restart the current slide in captivate?

  Hi all

  I have a slide in captivate 4 that contains several boxes that appear in the same place as the last when we click on an "ok" button (I use the chronology of fade in and out relevant legends). The customer asked when you get to the final, a watch reset button which will reload the current slide, so you could read it again, if you need (weird!).

  I'm sure the answer is obvious in the face but can't find a relevant action for the button. Could someone help please!

  Thanks in advance

  Chris Maile

  Hi Chris,

  Try to resolve your problem:

  slide1 is the slide where - that you want a button that takes the departure of slide1.

  1 have a fake Blade (say D slide) just before the slide 1.

  2 have a button on slide 1 which would have 'Jum'a drag' action and would take the user to the D slide.

  3. ask to "go to the slide" action on the OnSlideEnter bone slide D and go to slide 1.

  Let me know if this helped you to solve the problem.

  Manish

  http://blogs.Adobe.com/Captivate

• iPad App do not restart on the first slide

  Has anyone else encountered this problem with an app for iPad:

  I start the app and scroll to different slides.

  I then shut down the application complete by using the procedure on an iPad.

  When that I raise the the app, it loads in the last slide, I was instead of the initial launch slide.

  Suggestions would be greatly appreciated.

  This is how works the Viewer. He always remembers the last position that you were in.

  Neil