looking for a beginners guide on site ot

Similar Questions

• Looking for a Manual/Guide PDF of the laptop parts

  Hi all

  I'm new here and need for direction and information.  I have a laptop of HP2000, produced #QE345UA #ABA and would like to find the PDF manual for my system.  I think I'm having a problem to find the article on the HP site for documents and manuals.

  Can someone point me in the direction of correction?

  Thank you

  Julie

  Here you go:

  Your manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• you are looking for a leveling Guide ESX 3.5 / 2.5 VC-> 4.0 ESX / VSphere

  Hello list,

  can someone point me to a working upgrade for this case? I saw that there is a new version supportet VMFS in ESXi 4. I do an upgrade of my vmfs, data warehouses?

  Kind regards

  Andreas

  Here is the doc upgrade

  vSphere Upgrade Guide

  you don't need to upgrade the data store

  AP

• You are looking for a Design Guide for the NAC

  I saw the post that was dated in December 2009. When I tried to get

  the link is said that the document was not there.

  Any help would be appreciated.

  Zebula:

  The following document would help?

  Virtualization of network - Network Admission Control Deployment Guide

  http://www.Cisco.com/en/us/docs/solutions/Enterprise/Network_Virtualization/NACDepl.PDF

  Best regards

  Mike

• Unable to see the history URL in the address bar while looking for a site or a Web page

  When you type in the address bar; already firefox was looking for my story - visited pages/sites also.
  But now stragly its not research in history. Sometimes not even in bookmarks.

  All value options are displayed in the following images of my Firefox.

  https://DB.TT/h1DWOxH8

  https://DB.TT/Gl0dSbbJ

  If you still have this problem in Mode safe?

  You can check for problems with preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• When you are looking for a firefox theme is more gray-out or shows what sites I've looked at and I need to know how to get there

  Using Yahoo, I am looking for a topic. When sites come after I have watch all of them, does not change the color of the print to show that I looked at a particular site. What should I do to make this show in the change of printing color?

  • Make sure the history is enabled: Tools > Options > privacy > History: remember my browsing history
  • Make sure that you run not Firefox in private browsing mode (Firefox/tools > stop private browsing is grayed out, see private - browsing using Firefox without saving history)
  • To view the history and Cookie settings in tools > Options > privacy, choose the setting ' Firefox will be: use the custom settings for history ".

• Looking for a 'how-to' guide reinstall Windows Vista after upgrading motherboard

  Original title: the motherbard and cpu upgrade

  I want to install (I hope) soon new motherboard and CPU and I was looking for how to guide to reinstall vista after upgrade of the motherboard. Is it possible to get to the office without big hazzle and start reinstalling from there.

  In fact, I want to reinstall vista because I think it's much easier to try to record all programs and other settings.

  I tried to use already search funtion and it did not the asnwer I was looking for.

  I have oem (at least it says in the box) version of vista 32 bit.

  If the motherboard is exactly the same or almost exactly the same there should be no problem.  Otherwise you will want to completely reinstall Vista or even your system will contain drivers for the hardware is no longer present or missing drivers for the new hardware on the motherboard.

  "illuknisaa" wrote in the new message: * e-mail address is removed from the privacy... *

  I know how to reinstall Vista (I did this couple times) but I don't know how Vista reacts when a new motherboard is installed. I just need to reactivate vista or even will I get to the office?

• What tools do you use to determine the Web sites that your customers are looking for?

  We all know and understand what talking about travel buyers.  Various research estimated that up to 90% of the search is taking place for most online and before a prospect decides to talk to a sales representative.  A session of the CEB Dreamforce I attended to referenced that the average prospect is looking for 10 different sources of information guide their decision to buy and the seller's Web site is just a trust least. (I'm paraphrasing from memory, so don't be too hard on me if something is disabled) It would be useful to know if any of you use tools that help to discover some of these other websites which is underway in addition to our own.  Would love to know what works.  Thank you!

  Hi Joseph, you will have problems on this one.  You used to be able to make a number of cough... cough... not strictly beyond the means of the Council.

  In the old days, you can use techniques such as SpyJAX, etc. for this - but they don't work anymore

  I had a friend that I had used to work with who has worked on a way to push this information automatically in an another marketing automation platform (although you could have done in Eloqua) and adds it to their lead, scoring model.

  While on the surface it looked like a really cool idea actually it didn't really prove anything - I digress...

  As you quoted the Dreamforce event you attended at the prospect of average search 10 different sources, I think I see what you're trying to identify, you want to know which party 3 different sites of your potential customers are searching on and then find a way to help guide a favorable outcome regarding your product through their research.

  First off you should check out some of these Tools to listen to social media.  Here those are all free, but you get others who will analyze linkedin, forums, etc.  Check out mentions of your competitors brand names and products too.

  Now you have a list of the various sources that are using your competitors, you now have your target.

  You now have your ammo.  You must develop a program of customer awareness.  Which is exploit your product advocates, these are current customers, who are very credible, extremely knowledgeable and love your product for its features.  There are a number of tools out there, that you can use for this.  One of the guys eloqua former albums, Mark organ, developed a software that will help you do just that.  Its platform is called influitive.  I have been an advocate of product before on this platform and believe me, it's the company.  I would probably spend at least one hour per week responding to the challenges posted for me.

  For example the company in question had a few targets in the groups they knew prospects would ask "which platform is better, X or Y?  I would join this group, they would give me a few points and then they would issue me any time challenges that this type of issue has come.  Because I had very deep knowledge on both platforms, I could give an answer that is hinged at the question of the person.  I was a 3rd party source, not a salesman saying "I work for company X and my product is the best, call me my details are...» ", this meant that I had a much greater impact in my opinion.

  Enter the power of Eloqua.  You get your defenders of a link to your Web site and give them their own unique query string.  All you need to do is pull a report from query string at the end of the month and voila, you not only what you were originally looking for, but your own clientele that contribute to your marketing effort.

  I hope this helps...

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

  My site appears much too big in firefox. And I want all browsers to view my site properly.
  I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

  You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

  Possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

• Suddenly, when I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before. To place a web page

  When I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before.

  Instead Google web page appears with a list of proposals, and I have to click on the link to the BBC it to get on the site.

  Ways you can give me the code to insert in the "topic: config" keyword. URL

  r

  Take a look at this module.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/keywordurl-hack/

• Looking for dv9933cl of Maintenance and Service of Guide

  I have a dv9933cl that needs a motherboard replacement.  I'm looking for the maintenance and Service Guide (MSG) for this model.

  Normally, the maintenance and Service Guide appears under Guides the user to the system, but appears not to be the case for any dv9900 series laptop PC.

  According to the sticker on the bottom of the laptop, the dv9933cl part of the dv9700 series.  However, the MSG to the dv9700 series (which is also for dv9500 dv9600 series) lists no information for the dv9900 series.

  In my particular case, I need to replace the motherboard, but the part # for the motherboard for the dv9933cl is not listed in the MSG dv9700 (the dv9933cl has a 512 MB NVIDIA video card).  I was able to find the part # (461069-001) on PartSurfer but still need the MSG for the disassembly instructions.

  I confirmed that the MSG dv9500, dv9600/dv9700 works for dv9900 series.  I used it to replace the motherboard and got in trouble or notice any differences.

  However, if you want to party #s, you'll have to use PartSurfer.

  Maybe HP wants to publish this manual in dv9900 series systems.  It would be very helpful!

• Looking for a registered Converter PDF download site

  Previously, I was able to use the "convert to PDF" function on my Dell printer... now all of a sudden he wants to convert to OCF or something...

  Hello

  I suggest you to contact Dell support on this issue. In the meantime, you can consult this article and check that helps. Refer to create a PDF section.

  http://support.Dell.com/support/eDOCS/systems/V105/en/UG/d0e1878.html

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_341170&isLegacy=true

  If you are looking for the third-party PDF converter, you can try the search in the Web site, using one of your favorite search engine.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• Looking for adobe certified companies that can create a web site of muse with java and PHP for me

  Looking for adobe certified companies that can create a web site of muse with java and PHP for me

  Relationship problems he...

  1: nothing like the Adobe Certified companies

  2: sites of Muse do no PHP support.