Lost hyperlinks when you insert pages into a large document

Similar Questions

• How to get the best image quality when you insert PDF into Word?

  I am able to insert a PDF file as an object in Word, but the image quality is a bit fuzzy.  Is this what I can adjust in order to improve the clarity of the image in Word?

  You can try to extract the images with the help of extract all Images or select only the parameters of the screen recording you get when you save in a DOC, but I think that the general result is that the image recorded with the same resolution as shown in the PDF document. It may be that you simply adjust your screen in WORD. You can look at the picture in WORD and see if it is used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed to the document and not as something other than the small number of fractions of resolution appears change.

• READ the events when you insert data into a CLOB to waiting

  Hello people,
  
  I too read waiting for IO (db file sequential read) on a CLOB, when data is inserted, and I don't understand why.
  
  Statement:
  INSERT into TABLE (< all columns list >) values < list of all values >;
  
  Duration:
  between 250ms and 500ms, so much is too long by far
  
  Location:
  * Database 11 GR 2 (11.2.0.3.0) Standard Edition on Linux (OEL 5) x86_64
  * Usually, I have about 200 of these inserts in a single transaction. Thus, generally such a transaction is open for at least 50 seconds.
  * This is an OLTP environment, so I can't drop indexes or constraints 'before' loading, in fact I'm loading and reading the table all the time.
  * Insertion happens simultaneously by multiple Java threads, all in France via JDBC thin driver.
  * The table is not partitioned (Standard Edition).
  * The table contains < 7 million lines.
  * I can't ADD, because the table is served in a logical way, and I do not have maintenance windows to rearrange segments.
  * There are a lot of NON NULL and check constraints simple insertion-value based on the table, but only SINGLE (as part of the numeric primary key) constraint.
  A column is a CLOB, but there is no constraint on the CLOB column.
  
  What I have done:
  Raised the execution plan. Here it is:
  ------------------------------------------------------------------------------------------------------------
  | ID | Operation | Name | Begins | Cost | A - lines. A - time | Pads | Bed | Written |
  ------------------------------------------------------------------------------------------------------------
  | 0 | INSERT STATEMENT. 1. 1. 0 | 00:00:02.75 | 5064 | 840. 2.
  | 1. LOAD TABLE CONVENTIONAL | 1 | | 0 | 00:00:02.75 | 5064 | 840. 2.
  ------------------------------------------------------------------------------------------------------------
  
  I tried to find out where all this runtime will, so I enabled level 12 10046 for this SQL tracing and tkprof analysis shows:
  
  Elapsed time are waiting on the following events:
  Event waited on times max wait for the Total WHEREAS
  ----------------------------------------   Waited  ----------  ------------
  DB file sequential read 61 0.01 0.29
  direct path write 30 0.01 0.00
  direct path read 15 0.00 0.00
  
  = > So now I know where my runtime is spent on: reading!
  
  The raw trace file says:
  
  WAITING #139690535902720: nam = 'db file sequential read' ela = 8514 file No. = 5 block #= blocks 16950925 = 1 obj #= tim 84425 = 1354644922207564
  WAITING #139690535902720: nam = "Write direct path" ela = 376 of file = 5 first dba = 16956449 block cnt = 1 obj #=-1 tim = 1354644922208331
  WAITING #139690535902720: nam = 'db file sequential read' ela = 321 file #= 5 block #= blocks 16956449 = 1 obj #= tim 84425 = 1354644922208727
  WAITING #139690535902720: nam = "direct path read" ela = 216 number of file = 5 first dba = 16956449 block cnt = 1 obj #= tim 84425 = 1354644922208998
  WAITING #139690535902720: nam = "Write direct path" ela = 375 folder = 5 first dba = 16956449 block cnt = 1 obj #= tim 84425 = 1354644922209458
  WAITING #139690535902720: nam = 'db file sequential read' ela = 5471 file #= 5 block #= blocks 8907590 = 1 obj #= tim 84422 = 1354644922215025
  EXEC #139690535902720:c = 2999, e = 18440, p = 4, cr = 14, cu is 38, SIG = 0, r = 1, dep = 0, og = 1, plh = 0, tim = 1354644922215246
  "STAT #139690535902720 id = 1 cnt = 0 pid = 0 pos = 1 obj = 0 op ='LOAD TABLE CONVENTIONAL (cr = pr 14 = 4 pw = 2 time = 16415 US)"
  OUTCOME #139690535902720:c = 0, e = 17, dep = 0, type = 1, tim = 1354644922216200
  
  obj #= 84425 is my CLOB
  
  
  Now my question:
  Why my reading INSERT a CLOB so heavily when inserts a row of data in my table?
  I wasn't able to find out, please share your thoughts.
  If you need more/other information, let me know.
  
  I thank very you much in advance!
  
  Best regards
  Martin Klier
  Principal, s/n

  Please check MOS note:
  Insert a LOB has bad performance; ARM reads in the Top 5 of the wait events [ID 1291494.1]

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• "this file does not have a program associated with it" message when you insert the sd card

  When I insert an SD card into my computer, I get a message that says f:\ that this file does not have a program associated with it... I know I can set default programs with the types of files in the Control Panel, but how do you recognize what to do when I insert an SD card in the computer?

  Windows 7
  The problem is caused by the automatic game changing options, this can sometimes happen when you install a new program, but they can easily be changed back. Click 'start' at the bottom left, go into "default programs" on the right side of the list (under computer / doc/images etc.) select "Change AutoPlay settings.
  You will find prob some of the sections had the new auto run program, just edit those you want (or all) "ask me every time", you will find that when you insert an sd card, you get the options normal download, copy, etc. as usual.

• Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away.

  I have Microsoft Windows Vista Home premium, Version 6.0 (Build 6002: Service Pack 2), was Norton Internet Security. Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away. Perhaps because of my attempts to resolve this issue, some of my PC system has had problems, it became unstable, I've had several accidents that I got Norton 360, but it don't did me not the solution and stops working, I re installed Norton Internet Security. Please give some answers and advice on how to solve this problem, thank you.

  Hello

  You use a desktop or laptop computer?

  Is the mouse a mouse wired or wireless?

  What is the brand and model of the computer and the mouse?

  If you are using a laptop, I suggest to change the sensitivity of the mouse pad.

  If this is a wireless mouse it might be interference from another close to the mouse. Make sure that speech recognition is not enabled.

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.

• I can't open a CD when I insert it into my computer

  Simple answer only... Please.

  A CD (dvd?) with a scanner because I bought. Put in the laptop. Cannot see what is on the CD. Tried Windows Media Center to opt out. States that the CD is not the music, is not a movie, etc. I just want to open it... don't want to watch television... have one of those that across the room. I have no way to ask a technical question as I am a fake old man. I just want to open a cd.

  When you insert the cd/dvd cancel any window AutoPlay, in Explorer open/browse the cd player.

  In General if you are installing from the cd, you double-click the configuration file, but the process may be different depending on what the actual cd is - a program, a set of help files, or? and is it compatible win7?

• When you try to save a Word document in PDF format, Adobe is superimposing a completely separate document at the top of a page.  How can I fix it?

  When you try to save a Word document in PDF format, Adobe is superimposing a document completely separate on the top of a page.  Why this is happening and how to fix it?

  I actually found the problem.  There was a document incorporated on top that could only be seen in web layout view.  Thanks for your help though!

• What happens when you insert/modify/delete a row in a table - concepts

  I am trying to understand the below concepts regarding the internal concepts (for example, undo and redo)

  (1) what is happening in the database when you insert a row in a table?

  (2) what is happening in the database when you update a row in a table?

  (3) what is happening in the database when you remove one line in the table?

  I have read the oracle documentation and mistook the redo and undo behavior. It would be great if someone explains the concept in a simple way.  I'm a novice programmer to understand database concepts. Any help would be much appreciated.

  INSERTIONS and deletions are handled the same way.  The cancellation of an INSERT is a DELETE.   The cancellation of a REMOVAL is an INSERT.

  Therefore, the generation 'Cancel' for INSERTION is less than that of a DELETION (because the cancellation of a DELETION is to reinsert the line - the value of each column in the row must be captured in the undo).

  If restore you an INSERT, then Oracle executes effectively a DELETE tablename WHERE rowid =... rowid_that_was_inserted.  A cancellation for an INSERTION is 'rapid '.

  If restore you a DELETION, then Oracle executes effectively an INSERT tablename values (col1, col2, coln).  The cancellation of a DELETION takes more time because Oracle would have to re-enter the values.

  Remember that Oracle also captures the redo to undo it (and do it again for the price drop if you do a restore).

  Hemant K Chitae

• LR opens when you insert a CF card

  I want to

  eliminate the auto open function when you insert a

  CF. card

  There is a solution in the FAQ, but there is no icon in the taskbar in Windows 7.

  How to stop auto opening thie?

  To stop the auto LR from do you it in the preferences.

  To control the behavior of windows you select AutoPlay control panel and you can completely disable or select what you want to happen in various circumstances.

• Over my OFFICE JET PRO 8600, how to scan multiple pages into a single document?

  How to scan multiple pages into a single document?

  Thank you

  Hi REDFIERO,

  I can help you scan multiple pages to a file.

  If you use a Mac, you can perform your analysis with HP Scan and when you save the file, choose PDF. Under the PDF Format you chose you will see the option to save all pages in a single file.

  If you are using a Windows operating system, follow the instructions in the following document, Scanning of multiple in a single PDF Pages.

  I hope this helps.

• How do I? Scan multiple pages into a single document

  How to scan multiple pages into a single document?

  If you let us know the scanner you are using as well as the name of the software, it would be easy to suggest the measures.

  See the following links for the procedure:

  http://support.HP.com/us-en/document/c01282192

  http://support.HP.com/us-en/document/nps05123

  http://support.HP.com/us-en/document/bps03330

• How to scan multiple pages into a single document using the CanoScan LiDE 200?

  How to scan multiple pages into a single document using the CanoScan LiDE 200?

  I can't find a way to get them to analyze all the time, or a way to put together them later.

  Hi dagda24,

  You can scan multiple pages into a single document with the scan PDF option.  Use the following steps to do:

  1. open MP Navigator.

  2. click on a Clcik.

  3. click Save to PC.

  4. change the Type of PDF file to PDF (multiple pages).

  5 other changes, as needed, and then click Scan.