M70-190: Made in China - original?

Similar Questions

• Re: Satellite M70-190 begins with PXE - E61: Media test failure, check cable of

  Toshiba Satellite M70-190

  put a new drive hard WD 500 GB, sata3. When to start Notepad appears.

  Tried to change the mode to boot from LAN SD - nothing.
  How to fix?

  (HHD 2.5 "500 GB WD Scorpio Blue SATA3 5400 RPM 8 MB)

  Satellite M70 is very old model of laptop, so I presume that this HARD drive is not recognized correctly (compatibility issues) and that is the reason why cell phone starts with the start LAN to the search option.

  Long ago I had M70 and right now I've updated with 260 GB if I m remembering well.

• Satellite M70-190 - program for the diagnosis and WLAN

  Toshiba Satellite M70-190.

  What is the program and how it put in place?
  Appears in the bottom right of the screen. Inside there was the diagnosis of the computer, a wireless network...

  Helps to restore?

  Hello

  Can you please tell us what operating system do you use?

  I think you mean that the PC and ConfigFree diagnostic tool. The two you can download on the Toshiba site.
  Check this box!

• That is important if the Sony cyber-shot DSC-HX10V is made in China against the Japan?

  The only new model of this device, I could find is online through Amazon and it is made in China - is this a problem?

  Also, I am a begnner and not tech savvy - I'll be able to understand how to use the camera from the manual online?

  hollymonty wrote:

  The only new model of this device, I could find is online through Amazon and it is made in China - is this a problem?

  No, it isn't.

  hollymonty wrote:

  Also, I am a begnner and not tech savvy - I'll be able to understand how to use the camera from the manual online?

  Manuals and guides available at http://esupport.sony.com/US/p/model-home.pl?mdl=DSCHX10V&LOC=3#/manualsTab cover the camera well enough, but if you are ever in a deadlock, you can post a question here.

• FOR A PROJECT I NEED 2 PRINTER WHICH IS NOT "MADE IN CHINA".

  Hello

  We are a company based in TURKEY.

  We got a projectabroad, but they insist we do not use products "made in china" even printers. Need 2 printers that is not made in China.

  PLEASE CAN YOU DIRECT US SOME SELLERS OR THE PRODUCTION DEPARTMENT OF HP

  THANKS IN ADVANCE

  This is what they want:

  (1) printer alarm/event:

  It must be black and white letter quality laser printer.

  It will have a speed of 22:00 or more in draft mode.

  Black Ribbon (quantity 4)

  the printer must be HP Laser Jet or equal

  WE CHOSE FOR THIS ONE: HP Q5401A LASERJET 4250 N

  (2) color and report printer:

  must create a monochrome impression of inkjet quality at min. flow from 22:00

  must also produce prints of quality color ink jet with a minimum resulation of 1200 dpi to min rate from 18:00.

  must be based RISC and support ethernet connectivity

  must be delivered with a min of MRAM 128 a parallel cable connection and spare monochrome toner cartridges and color.

  will be to JET of INK HP series

  WE HAVE CHOSEN FOR THIS ONE: INKJET HP OFFICE JET K1700 COLOR CB041B

  Almost all HP printers are manufactured in China, Malaysia and Thailand and Mexico. Serial number starts with CN, MY, TH and MX respectively. I'm not sure how to get printers from a specific location of any of HP. You will probably have to go to the store and find the serial number on the box before buy you.

• DELL V305 wireless printer, Made in China

  Dear Support Forums.

  I have not found another solution type and ask for the cure/help on my problem.

  IM using Windows 7 on a Dell hybrid and a set of DELL inkjet in a v305.

  I just buy new inks...

  I have not found my original installation... disc

  tryied to download, but I've found windows 7 drivers only in Chinese. Does not support this.

  Please help solve my problem.

  Thanks in advance,

  Mark

  Mark,

  Chinese English operating system?

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Start, Panel, programs and features, your printer, uninstall.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 7, 8 and 8.1 32-bit Vista or 64-bit Vista for Windows 7 drivers, 8 and 8.1 64-bit. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to drivers to...

  Dell V305 & V305w All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• How can I print on my printer Brothers with a Sony Mini Laptop made in China?

  Information about the printer

  Model: Brothers MFC - 210 c

  Features: USB cable, not without wire, scanner, copier and printer connection

  Computer Sony laptop information

  Model: Sony Notebook or Netbook PCG - 31311L

  Characteristics: Output USB cable, wireless, DVD/CD player, Arcsoft WebCam Companion 4 monitoring mode, exit HDMI, etc.

  Hello

  Check with the support of brother, their documentation online and drivers. OEM brother is responsible
  for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Brother - MFC - 201
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC210C

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  If this does not help, then you should contact the Support of brother.

  Brother - Support
  http://www.brother-USA.com/support/

  ===============================

  You may also contact the Sony Support.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DELL BATTERY ORIGINAL OR DUPLICATE CHECK

  Hi Admin

  I bought a dell battery for my laptop Inspiron N5110 in a store last week, I asked them for an original battery and my back is almost 2-3 hours and its fine... My question is that my battery is original or duplicate and how do I check this online or tell me the status.

  Its the part code is CN-04YRJH-48630-67S-O19O-A04 AND the DP/N 04YRJH made in China

  Please help me and they give me this with 1 year warranty and they say that his original. So please check and reply.

  Concerning

  SAINABA

  Hi sudheerguy,

  Thanks for joining Dell Community Forum.

  It's a valid Dell battery.

  For information on warranty, however, please click my username DELL and send me a private Message with the Service Dell number and your e-mail address, so that we can check and confirm.

  Note: Please don't mention the id of service tag or by e-mail on the public forum because it contains your personal information

• Cannot move recently implemented bookmark bookmarks and delete the original without losing

  When I save bookmarks why don't then I put them directly in the folder Iwant in? The drop down menu does not offer that choice.

  When I move the bookmark items recently in the folder I want to store them in the bookmark is duplicated in the recently marked with a bookmark folder. If I remove these two duplicates the bookmark disappears from the correct folder.

  I am not happy! I keep losing bookmarks. I have not been using long Firefox and there may be something wrong with my game to the top.

  Hope you can help.

  Rose

  • "Most visited" and recently 'signet' are examples of Smart Bookmarks folders and are not true what we call records.
  • These smart folders show a list created by a query of the places.sqlite database that stores the history and bookmarks in Firefox.
  • Smart folder lists show a maximum of 10 entries by default.
  • Bookmarks that appear in a list of smart folder are stored in a different folder and any changes are applied to the element of bookmark or true story.
  • If you delete an entry then the list is shifted upward and an entry that was not previously identified is added to show the 10 entries.
  • If you add a new bookmark or visit a Web site, then a new element is added at the top and disappears from the entrance at the bottom of this list.
  • Objects but that disappear from the list have not disappeared, just not more appear in this list.
  • Actions such as copy & paste, or delete that you perform on bookmarks in such a list is made on the original bookmark.
  • If you do not want a specific list and then extract this query (right click: delete), but do not delete the content that is displayed in a list.

• I want to know if the battery I bought dell inspiron n5010 is original or not

  Bar code

  KR-0U150P-71766-97Z-D3WN-A00

  Made in China

  DP/N 0U150P

  help kindly as its an urgent case

  Hi Jokervirus1

  Please write to us.

  Reference Dell batteries serial number begin by CN or KR.

  We checked the serial number you provided and it is an authentic part of Dell.

  Nothing to worry about.

  Concerning

• Imported sequence does not pick up changes to the Original

  When I use sequences nested with a project, any changes made to the original sequence is automatically reflected where it is embedded/included.

  For example, within a project, I have a sequence called "soccer". I understand not (NEST) this sequence in another sequence called "seq1".

  If I make changes to the "soccer", "seq1" automatically resumes to these changes (even if changes in the duration of "soccer" are NOT automatically picked up by "seq1", which is really annoying, but that's a topic for another day).

  Then, I created a new project and imported the sequences. This new project was "soccer" and "seq1" and everything worked very well.

  However, when I made changes to the "soccer", I was surprised to learn that although these changes was taken over by "seq1" in the original draft, they were NOT taken over by "seq1" in the new draft.

  In other words, it seemed that the import function makes a copy of the sequences from other projects, but this is a read-only snapshot... future changes to the original sequence are not reflected in the project in which they were imported. Which seems strange since it kind of goes against the idea of sequences. At the very least, it seems inconsistent.

  I do something wrong, or is that just how things work? Is it possible to obtain sequences imported to update without re - import?

  Heya Ed:

  When importing, the sequences of a project become sequences of project B (as if they had always been part of the project B initially).  So, project B is never look at a project for changes.

  This seems like a good feature request (feature request/Bug Report Form).  It could be 'Live nesting' or 'Live project Liaison.  I guess that's something that Adobe could be implemented via dynamic links.

  Or, if nothing else, a "sequence with other project sequence replace" type feature to speed up the process.

  Although, for example, it could become difficult.  Expect changes in project B is displayed in the project (in other words, be a reciprocity)?

  It might be more efficient to have the behavior of Final Cut Pro 1.25 7.0.3 was: open several project files at once and copy / paste sequences between projects (as well as bins, Master Clips, Clips of affiliation, subclips, titles, markers, etc.).

  -Warren

• Replace the original audio track

  I imported a movie like asset for Premiere Pro and created clips in a sequence of it. Several parts of the original film are in different places on the timeline, they are trimmed etc...

  When the video is almost over, I realized that the original contained in the original film audio is incorrect and I replace it with another audio file, which is of length the same and already imported into the project. But I don't see an option to replace the audio source to an audio track.

  I know it is possible to break the link video and audio, but this does not solve the problem. Then right click on a single item (after having to separate, it's only an audio track of a clip) in the timeline and choosing Properties, path that points to the original movie file. I would change the file path so that it points to my new current audio file.

  Is it possible to do more than to remove all existing audio tracks in the timeline and create them from the beginning, using the new audio asset as a source and do it manually any changes that were made to the original video?

  Well, you'll have to do the hard

  After you import your audio track of replacement, load it in the Source monitor. Then, by pressing the Alt + Shift key, drag the audio to one of your instances of clip with the sound 'bad '. Audio of the movie clip instance will be replaced (it's done Alt), and it will retain the same point (what's Shift). You will need to do this for each instance of a clip in the timeline; Unfortunately, you can not select them all and it in one pass - points in are not met then.

  The easy way would be to get a new copy of your original movie with replacement audio multiplex. All you have to do is then right click on the item in the project Panel, select replace sequences and navigate to the new replacement clip. The original main item will be replaced, and this will be running continuous down to all instances of the clip in the sequence of your project. If you can multiplex the original video with the audio again, it's the way to go (especially for a complicated editing); However, you said that you are using the video "m4u" (which I assume you meant "m4v") so this creates a little more difficult.

• cable to charge iPhone 4S true or false?

  Hello community, recently my load / cable data obtained a default so I purchased a new one via ebay. It is said that it is a new and original Apple, just product without its original case. However, I discovered that there are a lot of copies out there. Now, I'm worried that I use a fake copy can damage my beloved old iPhone 4s, I want to take with me when I need something small, but want to be reachable. On the Apple website, it is only an explanation for Lightning cable [ https://support.apple.com/de-de/HT204566 ] and a video that has only a comparison between a lightning cable and a 30pol (for iPhone 4sm iPad... etc.) [ https://www.youtube.com/watch?v=ETo1LC7NH1A ] the cable I have exactly the same specifications as those of the video. the printed label is closer to the USB, the writing is on the left "Designed by Apple Made in China" (no serial number) and not on the right and below. Is there a way to tell it's a fake or original? The material on the USB port looks cheaper than expected. Unfortunately, I do not have my old cable to compare since I threw. : c

  Hi Carrotkitty,

  Thank you for using communities of Apple Support.

  From your post it seems that you have purchased a replacement cable for your iPhone, and you want to make sure that the charger cable is a certified Apple accessory. I once had to buy an extra cable, in order to collaborate with you and certainly help you find the best resolution.

  Apple recommends to use only that Apple has certified and accessories that come with the logo ' Made for iPod/iPhone/iPad. Please use the resources below and make sure that your charging cable has been certified by the developer to Apple performance standards:

  On the iPhone, iPad and iPod accessories

  Identify the fakes or not certified lightning connector accessories

  In addition, load cables are available for purchase on our website online store.

  Power & cables

  Have a great day!

• Camcorder mounted ceiling for filming of musician?

  Hello

  I'm pressed for room in my small studio where three tripods that I use with my camcorder to get in the way. The other challenge is as a performing musician, I stand and the tripods do not extend at the height of the head which is just more beautiful. So, I came up with a great idea!

  How about a ceiling camera bracket? Now, it could be a fixed monitoring type mount but have a more flexible design that would allow you to pull the camcorder to a variety of heights and angles. In this way I free up space and get a wide range of easy to build angles of camera from shoulder height or head.

  Someone at - he saw this idea? Please do (3) and I'll buy them!

  Thanks for the links to the same or other ideas,

  SFSaxguy wrote:

  ... a more flexible design...

  the more flexible design has (literally) the Gorilla Pod:

  

  (click on pic to amazon links)

  You can fold it, wrap, hang anywhere; I use a cheap clone to attach a photo inside a football goal...

  In different sizes / 'arm lengths. The original is more 'closed' = safer for the camera. In a shop of penny, once I bought something, basically a thick wire, soft plastic and a tripod connector... 2€ .... I would not use it to attach a Canon 5 Mk III, but hlds my sacrifice light and cheap cams anywhere...

  other options are so-called magic pliers:

  

  (you can detach the blind Flash connector and replace it with a screw standard 1/4 "...)

  First you close the clamp, then the other button to fix the arm in a position any.

  $ 15 (China direct) up to 50-$80 (Manfrotto... made in China)

  Comes in different lengths and sizes...

  Last option: cam Tape Gaffa Tape to the ceiling. -Gaffa is always an option