Mac Book Pro screen black

Similar Questions

• 2008 mac book pro screen flashing folder with question mark at startup

  2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

  Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

  How to choose a boot on your Mac - Apple Support drive

• Mac Book Pro cracked screen inside, no damage to the outside

  Hello

  I woke up this morning with mac book open and off. I have seen that my screen was quite dirty and decided I have to clean fingerprints on it. I used a Clorox and a paper towel to clean. Once I finished I turned an and saw my screen cracked. When I rubbed my finger on the screen it there's no indication on the front or the back of the screen he was hit there. It is only within the screen. I took it to apple and they said it was an accident, when I washed only the screen, as I did with several Mac Book Pro, I bought in the past. I have Applecare, but he does not apparently. No where else on my mac does show that I have damage and I did a diagnosis, and there is nothing else wrong with my system. They said that I am $ 800 and it's just scandalous due to a stream for the super screen thin on the inside. I don't know where to go from here, but I've used Apple products in my life and being a college student, I don't have that kind of money to fix. This problem should of never happened. I do all my graphics and coding on my Mac and have always loved. I also have a case of black Tech21 surrounding for added protection so something like this has not happened. Please if there is any help I can get here, it would be highly appreciated.

  Benjamin Schmidt

  Make your case to a store manager, but it is difficult to claim "just happened by itself." Be nice to the staff of the store, you are basically arguing for special treatment.

  It does not mean you did anything on purpose, but the MacBook was responsible, if you are responsible for. The cause could be anything from a drop of abrupt changes in temperature. Who knows...

  Good luck!

• Tasks screen on MAC Book Pro retina

  Hi, I have a Mac book pro Retina of and screen have stains. Can you fix this? Where should I go?

  Take it to any Apple store for a free evaluation.

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Spill of liquid on my Mac book pro

  Spilled coffee on Mac book pro and it closes but first of all, the screen went black and had horizontal lines before she turned off how can I help?

  Do not feed it upwards. Take it to an authorized for assessment service center. Get ready for a major repair bill.

• Mac book pro with projector color issue

  I used a mac book pro for presentations keynote with very few problems. I did one yesterday and when I plugged it up to the lcd projector, the screen went weird and then it had a bluish tint through all the slides. I turned implementing mirroring on and outside, and it still does not go far. Can someone tell me how to solve this problem? Thank you

  How the project is connected to a Mac? Entry and exit of Mac projector?

  The projector works OK now with another computer using the same projector entry?

  This Mac output works OK with another screen?

• My MAC Book Pro does support Wi-Fi 5 GHz?

  Dear,

  I need your help. I'll try to find the WiFi 5 GHz, but it does not appear in my Mac Book Pro while other computers and my Iphone 6s can and works perfectly. I don't know whether or not my Mac Book Pro supports 5 GHz. I would be grateful if someone could help me. Here are the details of my Mac Book Pro.

  MacBook Pro (13-inch, mid-2012)

  2.9 GHz of Intel Core i7 processor

  8 GB 1600 MHz DDR3 memory

  Card type: AirPort Extreme (0x14E4, 0xF5)

  Firmware version: Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  MAC address:

  Locale: ETSI

  Country code: QA

  Supported PHY modes: 802.11 a/b/g/n

  The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 149, 153, 157, 161, 165

  Wake On Wireless: support

  AirDrop: support

  Status: connected

  Million thanks in advance!

  The simple answer is no.

  DISPLAY
  Built-in display	13.3 inch (visible diagonal) backlit by bright panoramic LED
  Resolutions	1280 x 800 (native), 1152 x 720, 1024 x 640 and 800 x 500 pixels at 16:10 aspect ratio x. 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 format; 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 extended format; 720 x 480 pixels at 3:2 format. 720 x 480 pixels at 3:2 format stretched
  GRAPHICS
  Graphics card	Graphics Intel HD 4000
  Graphics memory	Up to 1 GB of DDR3 SDRAM shared with main memory
  Connection of the screen	Digital video output Thunderbolt
  Display stand	Support for up to two screens Thunderbolt
  Display modes	Dual extended display, copy video and AirPlay Mirroring
  External resolution	Up to 2560 x 1600 pixels

• Notes on Mac Book Pro applications

  I use Mac Book Pro retina, 13-inch, mid 2014,2.8 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel Iris 1536 MB and last OS X El Capitan 10.11.2. (15 C 50). error messages occur when you leave notes. I use Version 4.2 (549.10.1) of the Notes in Mac Book pro application.  I am unable to remember exactly what I did before the error message occurred.  Need help solving this problem!

  

  

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• FaceTime works on iPhone, but not on Mac Book Pro

  I can click on FaceTime with iPhone but when I try to use FaceTime on Mac Book Pro, nothing happens that he does nothing when I click on a contact to establish a connection.  Don't know why?  I tried to locate preferences when I open FaceTime app on iPhone and Mac, but it does not appear.  I read on the forum that it should be on the left side of the screen below the contacts but I don't know why it does not appear or the other?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Mac Book Pro El Capitan won't start

  End of 2011 Mac Book Pro with OS X 10.11.2 and 500 GB SSD locked when you change an image in Lightroom 6.  Display got lines in there, then moved to the right until all the images in all programs were packaging off the screen on the left and ending on the right.  I decided to quit Lightroom and it went in her check and the safeguard of this app.  At this point the computer locked up completely with the beachball forever.  I stopped with the start key and restarted.  Desktop came, but then locked up again.  No restart in any mode after that.  Computer goes the logo Apple on a white screen with the high CPU activity as evidenced by a cooling fan screaming.

  I have a backup recovery app on a USB key, but does not know how to use it. I also still have the original hard drive that could possibly be re-installed, but he showed signs of early failure.

  Can anyone help?

  Thank you very much

  Tom

  MacBook Pro repair for graphics issues outreach program

• Can I connect an external display in Mac book pro with other connction as Thunderbolt

  I have an extran via TB screen connected with a mac book pro early 2011 for image corrections

  Now, I want to add an external box with my MB as well and use the thunderbolt connection, but it is already used by the login screen extrenal

  are there other possibilities to plug my screen so I can use the TB connection for extrnal HD?

  I only have 1 free USB 2.o and a fire wire 800 free, can I use one of these attachments?

  Try one of these:

  https://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/

  Ciao.

• U2414H, Mac Book Pro, DisplayPort 1.2 empty, solved

  I'm posting here in the hope that it gets indexed by search engines and other people can find the answer that I spent a few hours searching without luck.  At first, I must say that I am generally very pleased with this monitor - like bezel-thin, very good quality picture, easy to set up and a great price. However, most of this post is going to be a complaint and attention to others. told me, incorrectly, that my early 2011 Mac Book Pro 15 "mini-DisplayPort taken in charge the DisplayPort 1.2 Protocol. It turns out only. Then when I activated the DisplayPort 1.2 screen turned white, as the instructions said he could. No biggie, you would think - just get on-screen display (OSD) to the top again and disable DisplayPort 1.2 or do a factory reset. Here, you can't get the OSD until a source is connected correctly to the screen. Which means that you can not disable DisplayPort 1.2 or do a factory reset, you want to do because you cannot successfully connect to the screen, until properly connect a device to the screen. And so on and so forth.

  There is no other way to do a factory reset, so the only way for me to reset the monitor that is to go buy a mini-DisplayPort-HDMI cable in order to connect to the monitor in this way and do a factory reset. I confirmed this with a call to Dell technical support, too. I don't quite see how thought happened during the design of the firmware. How do you design a monitor where the only way to do a factory reset is when a device is connected correctly? A major flaw, but it will apply only if you don't know this in advance, where this post.

  It also would have been clearer if the warning had said "this can make your blank screen which, until you have another cable to connect via HDMI, means that you have essentially an expensive piece of plastic."

  Follow these steps to disable the DP1.2 on the U2414H WITHOUT signal input

  Buttons =.
  Preset, brightness, Menu, power supply, output

  When you press the Menu button, the buttons are then =
  Up arrow key or down arrow control OK, return, power

  * Turn off the monitor
  Unplug all the video inputs of the U2414H wiring
  * Turn on the monitor
  * Press the Menu key
  * Press the button OK check (3rd left) and hold FOR 15 seconds
  * Disable DP 1.2

• Hello, I have a new Mac Book Pro and I'm not sure how to use it. I just 'downloaded' Lightroom and it is not showing in my toolbar or on my desk... It shows a circle that says Lightroom 5.7.1 and when I click it it brings me to the ini

  Hello, I have a new Mac Book Pro and I'm not sure how to use it. I just 'downloaded' Lightroom and it is not showing in my toolbar or on my desk... It shows a circle that says Lightroom 5.7.1 and when I click it it brings me to the download process initiail... Help!

  Hello

  Please click on the first " Finder " icon on the dock (toolbar below) on your screen, in the left panel, you will see an option, click on 'Applications' on it.

  Under the present, you should be able to see Lightroom if it is properly installed.

  

  Let us know if that helps.

  Kind regards

  Bani

• I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  Please specify the version of Mac OS for reference. just in case if the procedure below did not work.

  N ° 1)

  1) click the icon of the Apple menu and select System Preferences, and then click Network.

  (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

  (3) then click on the Advanced button, then click proxies.

  (4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck "Use FTP Passive Mode (PASV)".

  (5) then click on the Apply Now button.

  Then try to reinstall Adobe Creative cloud,

  Always the same?

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"

  (4) double click on the Hosts file, it will open it with TextEdit.

  Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  
  

  
  

  
  

  
  

  
  

  
  

  ------------------------------------------------------------------------------------------ -
  

  No entry to Adobe? You can follow the procedure below:

  -----------------------------------------------------------------------------------------
  

  Please follow the steps below:

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  
  

  
  

  Step 2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  
  

  Step 3)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater, Adobe Application Manager and OOBE.

  
  

  Step 5)

  
  

  
  

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Click on the link and download file DMG cloud creative Installer directly below and install Adobe Creative Cloud app:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg